[ 0.000000] Linux version 2.6.25-rc8 (root@myth) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #2 SMP Mon Apr 14 22:08:05 EST 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f4f50] 000f4f50 [ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261856 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261856 [ 0.000000] On node 0 totalpages: 261856 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32227 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F6920, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 3FEE3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 3FEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 3FEE3180, 40DF (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 3FEE0000, 0040 [ 0.000000] ACPI: HPET 3FEE73C0, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG 3FEE7440, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC 3FEE72C0, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT 3FEE74C0, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT 3FEE7950, 0275 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:80100000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259811 [ 0.000000] Kernel command line: root=UUID=c6671669-4212-4970-9f88-666c7e527bd4 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1800.045 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 992432k/1047424k available (2042k kernel code, 54348k reserved, 957k data, 340k init, 129920k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc03f5000 - 0xc044a000 ( 340 kB) [ 0.004000] .data : 0xc02fe984 - 0xc03edfa0 ( 957 kB) [ 0.004000] .text : 0xc0100000 - 0xc02fe984 (2042 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.080008] Calibrating delay using timer specific routine.. 3603.04 BogoMIPS (lpj=7206085) [ 0.080027] Security Framework initialized [ 0.080034] SELinux: Disabled at boot. [ 0.080037] Capability LSM initialized [ 0.080047] Mount-cache hash table entries: 512 [ 0.080169] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.080172] CPU: L2 cache: 1024K [ 0.080174] CPU: Physical Processor ID: 0 [ 0.080175] CPU: Processor Core ID: 0 [ 0.080178] using mwait in idle threads. [ 0.080181] Compat vDSO mapped to ffffe000. [ 0.080186] Checking 'hlt' instruction... OK. [ 0.096417] ACPI: Core revision 20070126 [ 0.103269] CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d [ 0.103287] Booting processor 1/1 ip 4000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3600.02 BogoMIPS (lpj=7200048) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 1024K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.192364] CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d [ 0.192381] Total of 2 processors activated (7203.06 BogoMIPS). [ 0.192523] ENABLING IO-APIC IRQs [ 0.192687] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.236030] Brought up 2 CPUs [ 0.236050] CPU0 attaching sched-domain: [ 0.236052] domain 0: span 03 [ 0.236054] groups: 01 02 [ 0.236057] CPU1 attaching sched-domain: [ 0.236059] domain 0: span 03 [ 0.236060] groups: 02 01 [ 0.236284] net_namespace: 548 bytes [ 0.236481] NET: Registered protocol family 16 [ 0.236654] EISA bus registered [ 0.236659] ACPI: bus type pci registered [ 0.236740] PCI: Using MMCONFIG for extended config space [ 0.236742] PCI: Using configuration type 1 [ 0.236743] Setting up standard PCI resources [ 0.238682] ACPI: EC: Look up EC in DSDT [ 0.243074] ACPI: Interpreter enabled [ 0.243080] ACPI: (supports S0 S3 S5) [ 0.243091] ACPI: Using IOAPIC for interrupt routing [ 0.247733] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.248297] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.248301] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.248880] PCI: Transparent bridge - 0000:00:1e.0 [ 0.248909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.249119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.249208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.249302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.259640] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.259745] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.259847] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.259950] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.260061] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.260164] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.260268] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.260370] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.260585] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.260613] pnp: PnP ACPI init [ 0.260620] ACPI: bus type pnp registered [ 0.263483] pnp: PnP ACPI: found 14 devices [ 0.263485] ACPI: ACPI bus type pnp unregistered [ 0.263490] PnPBIOS: Disabled by ACPI PNP [ 0.263699] PCI: Using ACPI for IRQ routing [ 0.263701] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.268036] NET: Registered protocol family 8 [ 0.268039] NET: Registered protocol family 20 [ 0.268095] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11 [ 0.268102] hpet0: 3 64-bit timers, 14318180 Hz [ 0.276050] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.276054] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.276058] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.276062] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.276065] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.276080] system 00:0a: ioport range 0x400-0x4bf could not be reserved [ 0.276089] system 00:0b: iomem range 0xc0000000-0xcfffffff could not be reserved [ 0.276097] system 00:0c: iomem range 0xcca00-0xcffff has been reserved [ 0.276101] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.276104] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.276108] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.276112] system 00:0c: iomem range 0x3fee0000-0x3fefffff could not be reserved [ 0.276116] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.276120] system 00:0c: iomem range 0x100000-0x3fedffff could not be reserved [ 0.276124] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.276127] system 00:0c: iomem range 0xfed13000-0xfed1dfff could not be reserved [ 0.276131] system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 0.276135] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.276139] system 00:0c: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 0.276143] system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.276147] system 00:0c: iomem range 0xe0000-0xeffff has been reserved [ 0.306587] PCI: Bridge: 0000:00:01.0 [ 0.306590] IO window: c000-cfff [ 0.306593] MEM window: 0xe0000000-0xe3ffffff [ 0.306596] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.306601] PCI: Bridge: 0000:00:1c.0 [ 0.306603] IO window: b000-bfff [ 0.306607] MEM window: disabled. [ 0.306610] PREFETCH window: disabled. [ 0.306615] PCI: Bridge: 0000:00:1c.1 [ 0.306618] IO window: d000-dfff [ 0.306622] MEM window: 0xe4000000-0xe4ffffff [ 0.306626] PREFETCH window: 0x00000000e8000000-0x00000000e80fffff [ 0.306631] PCI: Bridge: 0000:00:1e.0 [ 0.306633] IO window: disabled. [ 0.306637] MEM window: 0xe5000000-0xe7ffffff [ 0.306641] PREFETCH window: disabled. [ 0.306656] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.306661] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.306679] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.306683] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.306700] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.306705] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.306715] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.306725] NET: Registered protocol family 2 [ 0.320090] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.320326] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.320773] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.321059] TCP: Hash tables configured (established 131072 bind 65536) [ 0.321062] TCP reno registered [ 0.328249] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.504044] Switched to high resolution mode on CPU 0 [ 1.994726] it is [ 3.757197] Freeing initrd memory: 41371k freed [ 3.525082] audit: initializing netlink socket (disabled) [ 3.525098] type=2000 audit(1208350829.756:1): initialized [ 3.525269] highmem bounce pool size: 64 pages [ 3.527113] VFS: Disk quotas dquot_6.5.1 [ 3.527188] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.527307] io scheduler noop registered [ 3.527309] io scheduler anticipatory registered [ 3.527310] io scheduler deadline registered [ 3.527367] io scheduler cfq registered (default) [ 3.527460] pci 0000:01:00.0: Boot video device [ 3.527534] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 3.527568] assign_interrupt_mode Found MSI capability [ 3.527596] Allocate Port Service[0000:00:01.0:pcie00] [ 3.527631] Allocate Port Service[0000:00:01.0:pcie03] [ 3.527703] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 3.527735] assign_interrupt_mode Found MSI capability [ 3.527767] Allocate Port Service[0000:00:1c.0:pcie00] [ 3.527798] Allocate Port Service[0000:00:1c.0:pcie02] [ 3.527829] Allocate Port Service[0000:00:1c.0:pcie03] [ 3.527907] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 3.527938] assign_interrupt_mode Found MSI capability [ 3.527970] Allocate Port Service[0000:00:1c.1:pcie00] [ 3.528001] Allocate Port Service[0000:00:1c.1:pcie02] [ 3.528032] Allocate Port Service[0000:00:1c.1:pcie03] [ 3.528215] isapnp: Scanning for PnP cards... [ 3.881280] isapnp: No Plug & Play device found [ 3.900504] Real Time Clock Driver v1.12ac [ 3.900640] hpet_resources: 0xfed00000 is busy [ 3.900695] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 3.900808] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.901400] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.902172] brd: module loaded [ 3.902229] input: Macintosh mouse button emulation as /class/input/input0 [ 3.902370] PNP: No PS/2 controller found. Probing ports directly. [ 3.911316] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 3.911319] If AUX port is really absent please use the 'i8042.noaux' option. [ 3.912338] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.920347] mice: PS/2 mouse device common for all mice [ 3.920483] EISA: Probing bus 0 at eisa.0 [ 3.920510] EISA: Detected 0 cards. [ 3.920513] cpuidle: using governor ladder [ 3.920515] cpuidle: using governor menu [ 3.920973] TCP cubic registered [ 3.920982] NET: Registered protocol family 1 [ 3.921007] Using IPI No-Shortcut mode [ 3.921337] Freeing unused kernel memory: 340k freed [ 4.463532] fuse init (API version 7.9) [ 4.747338] ACPI: ACPI0007:00 is registered as cooling_device0 [ 4.747344] ACPI: Processor [CPU0] (supports 8 throttling states) [ 4.747492] ACPI: SSDT 3FEE78C0, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 4.474657] ACPI: ACPI0007:01 is registered as cooling_device1 [ 4.474662] ACPI: Processor [CPU1] (supports 8 throttling states) [ 5.216681] usbcore: registered new interface driver usbfs [ 5.216708] usbcore: registered new interface driver hub [ 5.216760] usbcore: registered new device driver usb [ 4.945172] r8169 Gigabit Ethernet driver 2.2LK loaded [ 4.945193] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 4.945209] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 4.945508] eth0: RTL8168c/8111c at 0xf8862000, 00:1d:7d:a6:13:68, XID 3c2000c0 IRQ 220 [ 5.225559] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 5.225573] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 5.225576] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.225729] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 5.229624] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 5.229637] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8104000 [ 5.248091] USB Universal Host Controller Interface driver v3.0 [ 5.249168] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.249286] usb usb1: configuration #1 chosen from 1 choice [ 5.249309] hub 1-0:1.0: USB hub found [ 5.249316] hub 1-0:1.0: 8 ports detected [ 5.249478] No dock devices found. [ 5.271162] SCSI subsystem initialized [ 5.295658] libata version 3.00 loaded. [ 5.031434] Floppy drive(s): fd0 is 1.44M [ 5.047976] FDC 0 is a post-1991 82077 [ 5.344613] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 5.344624] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 5.344628] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.344655] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.344679] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000 [ 5.344783] usb usb2: configuration #1 chosen from 1 choice [ 5.344805] hub 2-0:1.0: USB hub found [ 5.344810] hub 2-0:1.0: 2 ports detected [ 5.388496] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 5.388514] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 5.388518] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.388544] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.388571] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100 [ 5.388675] usb usb3: configuration #1 chosen from 1 choice [ 5.388698] hub 3-0:1.0: USB hub found [ 5.388703] hub 3-0:1.0: 2 ports detected [ 5.412474] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 5.412486] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 5.412490] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.412523] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.412548] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200 [ 5.412654] usb usb4: configuration #1 chosen from 1 choice [ 5.412680] hub 4-0:1.0: USB hub found [ 5.412685] hub 4-0:1.0: 2 ports detected [ 5.436476] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 5.436488] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 5.436493] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.436526] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.436572] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300 [ 5.436674] usb usb5: configuration #1 chosen from 1 choice [ 5.436695] hub 5-0:1.0: USB hub found [ 5.436700] hub 5-0:1.0: 2 ports detected [ 5.144331] ata_piix 0000:00:1f.2: version 2.12 [ 5.144331] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 5.144331] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 5.144331] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.144611] scsi0 : ata_piix [ 5.144675] scsi1 : ata_piix [ 5.145336] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 5.145339] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 5.196334] ata1.00: HPA detected: current 976771055, native 976773168 [ 5.196343] ata1.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133 [ 5.196347] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 5.512353] ata1.00: configured for UDMA/133 [ 5.220346] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 5.232337] usb 5-1: configuration #1 chosen from 1 choice [ 5.260449] ata2.01: NODEV after polling detection [ 5.292539] ata2.00: ATAPI: PIONEER DVD-RW DVR-215, 1.13, max UDMA/66 [ 5.296355] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 5.320712] usb 5-2: configuration #1 chosen from 1 choice [ 5.323797] usbcore: registered new interface driver hiddev [ 5.328548] ata2.00: configured for UDMA/66 [ 5.328673] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5 [ 5.335210] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-215 1.13 PQ: 0 ANSI: 5 [ 5.336782] input: MosArt Optical Mouse as /class/input/input1 [ 5.610625] Driver 'sd' needs updating - please use bus_type methods [ 5.611270] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB) [ 5.611285] sd 0:0:0:0: [sda] Write Protect is off [ 5.611287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.611309] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.611365] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB) [ 5.611381] sd 0:0:0:0: [sda] Write Protect is off [ 5.611383] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.611403] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.611406] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 5.348222] input: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.3-1 [ 5.622044] sda1 sda2 sda3 sda4 [ 5.352344] input: HID 1267:0103 as /class/input/input2 [ 5.352344] input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.3-2 [ 5.624361] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.626809] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.626833] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.638720] input: HID 1267:0103 as /class/input/input3 [ 5.642441] input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.3-2 [ 5.642473] usbcore: registered new interface driver usbhid [ 5.643041] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 5.392592] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.392596] Uniform CD-ROM driver Revision: 3.20 [ 5.392658] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.795467] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.795473] EXT3-fs: write access will be enabled during recovery. [ 5.824374] kjournald starting. Commit interval 5 seconds [ 5.532356] EXT3-fs: sda2: orphan cleanup on readonly fs [ 5.532356] ext3_orphan_cleanup: deleting unreferenced inode 2162696 [ 5.532356] ext3_orphan_cleanup: deleting unreferenced inode 2162695 [ 5.532356] ext3_orphan_cleanup: deleting unreferenced inode 2162694 [ 5.532356] ext3_orphan_cleanup: deleting unreferenced inode 2162693 [ 5.532356] ext3_orphan_cleanup: deleting unreferenced inode 2162692 [ 5.532356] EXT3-fs: sda2: 5 orphan inodes deleted [ 5.532356] EXT3-fs: recovery complete. [ 5.532356] EXT3-fs: mounted filesystem with ordered data mode. [ 7.588307] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.611779] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.637751] Linux agpgart interface v0.103 [ 7.685117] input: Power Button (FF) as /class/input/input4 [ 7.745917] ACPI: Power Button (FF) [PWRF] [ 7.745979] input: Power Button (CM) as /class/input/input5 [ 7.804560] ACPI: Power Button (CM) [PWRB] [ 8.368315] input: PC Speaker as /class/input/input6 [ 8.385943] iTCO_vendor_support: vendor-support=0 [ 8.405836] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 8.424686] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 8.424714] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.208527] parport_pc 00:09: reported by Plug and Play ACPI [ 8.208527] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.624693] Linux video capture interface: v2.00 [ 8.645548] intel_rng: FWH not detected [ 8.696878] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 8.696922] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 8.697036] cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected] [ 8.697039] cx88[0]: TV tuner type 63, Radio tuner type -1 [ 8.707526] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 8.948415] tuner' 0-0061: chip found @ 0xc2 (cx88[0]) [ 8.951099] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 8.952884] tuner' 0-0063: chip found @ 0xc6 (cx88[0]) [ 9.011538] tveeprom 0-0050: Hauppauge model 96559, rev C1A0, serial# 320802 [ 9.011542] tveeprom 0-0050: MAC address is 00-0D-FE-04-E5-22 [ 9.011544] tveeprom 0-0050: tuner model is Philips FMD1216ME (idx 100, type 63) [ 9.011547] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 9.011550] tveeprom 0-0050: audio processor is CX882 (idx 33) [ 9.011552] tveeprom 0-0050: decoder processor is CX882 (idx 25) [ 9.011554] tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter [ 9.011556] cx88[0]: hauppauge eeprom: model=96559 [ 9.011566] cx88[0]/0: found at 0000:04:01.0, rev: 5, irq: 19, latency: 32, mmio: 0xe5000000 [ 9.034846] wm8775' 0-001b: chip found @ 0x36 (cx88[0]) [ 8.649344] cx88[0]/0: registered device video0 [v4l2] [ 8.649367] cx88[0]/0: registered device vbi0 [ 8.649386] cx88[0]/0: registered device radio0 [ 9.045374] cx88[0]/2: cx2388x 8802 Driver Manager [ 9.045394] ACPI: PCI Interrupt 0000:04:01.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 9.045404] cx88[0]/2: found at 0000:04:01.2, rev: 5, irq: 19, latency: 32, mmio: 0xe7000000 [ 9.124584] cx2388x alsa driver version 0.0.6 loaded [ 9.124584] ACPI: PCI Interrupt 0000:04:01.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 9.124584] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 8.741111] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 8.741115] cx88/2: registering cx8802 driver, type: dvb access: shared [ 8.741119] cx88[0]/2: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] [ 8.741122] cx88[0]/2: cx2388x based DVB/ATSC card [ 8.841806] DVB: registering new adapter (cx88[0]) [ 8.841811] DVB: registering frontend 0 (Conexant CX22702 DVB-T)... [ 8.884309] cx2388x blackbird driver version 0.0.6 loaded [ 8.884313] cx88/2: registering cx8802 driver, type: blackbird access: shared [ 8.884316] cx88[0]/2: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] [ 8.884320] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design) [ 8.884540] cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted [ 8.901273] lp0: using parport0 (interrupt-driven). [ 8.933314] cx88[0]/2-bb: ERROR: Firmware size mismatch (have 262144, expected 376836) [ 8.933372] cx88[0]/2: registered device video1 [mpeg] [ 8.961323] Adding 987988k swap on /dev/sda3. Priority:-1 extents:1 across:987988k [ 9.416883] EXT3 FS on sda2, internal journal [ 9.708622] kjournald starting. Commit interval 5 seconds [ 9.332598] EXT3 FS on sda4, internal journal [ 9.332598] EXT3-fs: mounted filesystem with ordered data mode. [ 9.712622] kjournald starting. Commit interval 5 seconds [ 9.712622] EXT3 FS on sda1, internal journal [ 9.712622] EXT3-fs: mounted filesystem with ordered data mode. [ 9.998232] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 10.945314] r8169: eth0: link up [ 11.322348] r8169: eth0: link up [ 11.325842] NET: Registered protocol family 10 [ 11.326854] lo: Disabled Privacy Extensions [ 11.461487] ppdev: user-space parallel port driver [ 11.448732] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 11.448732] apm: disabled - APM is not SMP safe. [ 13.891273] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 14.394080] Bluetooth: Core ver 2.11 [ 14.396671] NET: Registered protocol family 31 [ 14.396678] Bluetooth: HCI device and connection manager initialized [ 14.396683] Bluetooth: HCI socket layer initialized [ 14.443120] Bluetooth: L2CAP ver 2.9 [ 14.443125] Bluetooth: L2CAP socket layer initialized [ 14.496926] Bluetooth: RFCOMM socket layer initialized [ 14.497062] Bluetooth: RFCOMM TTY layer initialized [ 14.497066] Bluetooth: RFCOMM ver 1.8 [ 15.929017] NET: Registered protocol family 17 [ 27.697763] eth0: no IPv6 routers present