Linux version 2.6.25-vanilla (root@seli) (gcc version 4.2.3) #1 SMP PREEMPT Sat Mar 22 09:53:14 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe90000 (usable) BIOS-e820: 000000007fe90000 - 000000007fe98000 (ACPI data) BIOS-e820: 000000007fe98000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f71a0] 000f71a0 Entering add_active_range(0, 0, 523920) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 523920 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 523920 On node 0 totalpages: 523920 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2301 pages used for memmap HighMem zone: 292243 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F70D0, 0014 (r0 PTLTD ) ACPI: RSDT 7FE904EB, 0050 (r1 Sony VAIO 20061219 PTL 0) ACPI: FACP 7FE97C9A, 0084 (r2 Sony VAIO 20061219 PTL 5A) ACPI: DSDT 7FE91DF7, 5EA3 (r1 Sony VAIO 20061219 PTL 20050624) ACPI: FACS 7FE98FC0, 0040 ACPI: APIC 7FE97D1E, 0068 (r1 Sony VAIO 20061219 PTL 5A) ACPI: HPET 7FE97D86, 0038 (r1 Sony VAIO 20061219 PTL 5A) ACPI: MCFG 7FE97DBE, 003C (r1 Sony VAIO 20061219 PTL 5A) ACPI: SLIC 7FE97DFA, 0176 (r1 Sony VAIO 20061219 PTL 1000000) ACPI: APIC 7FE97F70, 0068 (r1 Sony VAIO 20061219 PTL 0) ACPI: BOOT 7FE97FD8, 0028 (r1 Sony VAIO 20061219 PTL 1) ACPI: SSDT 7FE9161D, 07DA (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE90B16, 028F (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE90A75, 00A1 (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE9053B, 053A (r1 Sony VAIO 20061219 PTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Sony ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519827 Kernel command line: root=/dev/sda6 ro quiet mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1662.567 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2070932k/2095680k available (2515k kernel code, 23476k reserved, 851k data, 296k init, 1178176k highmem) virtual kernel memory layout: fixmap : 0xfff80000 - 0xfffff000 ( 508 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc044f000 - 0xc0499000 ( 296 kB) .data : 0xc0374f51 - 0xc0449ed8 ( 851 kB) .text : 0xc0100000 - 0xc0374f51 (2515 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 3329.88 BogoMIPS (lpj=5547021) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 Booting processor 1/1 ip 4000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3326.59 BogoMIPS (lpj=5541748) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 Total of 2 processors activated (6655.48 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs net_namespace: 548 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE storm detected, disabling EC GPE ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:06: ioport range 0x680-0x6ff has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved system 00:06: ioport range 0xfe00-0xfe7f has been reserved system 00:06: ioport range 0xfe80-0xfeff has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: 0xd0000000-0xd1ffffff PREFETCH window: 0x00000000b0000000-0x00000000bfffffff PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: 0xc8000000-0xc9ffffff PREFETCH window: 0x00000000c0000000-0x00000000c1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: 0xca000000-0xcbffffff PREFETCH window: 0x00000000c2000000-0x00000000c3ffffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: 0xcc000000-0xcdffffff PREFETCH window: 0x00000000c4000000-0x00000000c5ffffff PCI: Bridge: 0000:00:1c.3 IO window: 5000-5fff MEM window: 0xce000000-0xcfffffff PREFETCH window: 0x00000000c6000000-0x00000000c7ffffff PCI: Bus 11, cardbus bridge: 0000:0a:03.0 IO window: 0x00001400-0x000014ff IO window: 0x00001c00-0x00001cff PREFETCH window: 0x88000000-0x8bffffff MEM window: 0x8c000000-0x8fffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 0xd2000000-0xd20fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Enabling device 0000:00:1e.0 (0004 -> 0006) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:0a:03.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1564k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Starting balanced_irq Using IPI No-Shortcut mode Freeing unused kernel memory: 296k freed libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 ata1.00: ATAPI: PIONEER DVD-RW DVR-K17, 1.00, max UDMA/33 ata1.00: configured for UDMA/33 ata2: port disabled. ignoring. scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17 1.00 PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18ac bmdma 0x18b0 irq 19 ata4: SATA max UDMA/133 cmd 0x18c0 ctl 0x18a8 bmdma 0x18b8 irq 19 ata3.00: ATA-7: TOSHIBA MK1234GSX, AH001A, max UDMA/100 ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2304000 usb 2-1: new low speed USB device using uhci_hcd and address 2 Driver 'sr' needs updating - please use bus_type methods ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Driver 'sd' needs updating - please use bus_type methods usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 > sd 2:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb 5-6: new high speed USB device using ehci_hcd and address 3 usb 5-6: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k ACPI: SSDT 7FE91300, 0240 (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE90DA5, 04C9 (r1 Sony VAIO 20061219 PTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7FE91540, 00DD (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE9126E, 0092 (r1 Sony VAIO 20061219 PTL 20050624) Marking TSC unstable due to: TSC halts in idle. ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) Time: hpet clocksource has been installed. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 0000:02:00.0: v1.21 addr 0xc8000000 irq 16 Yukon-FE (0xb7) rev 1 sky2 eth0: addr 00:13:a9:a5:19:4d iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23k iwl3945: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:06:00.0 to 64 iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' ACPI: PCI interrupt for device 0000:06:00.0 disabled ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /class/input/input2 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (58 C) ACPI: LNXTHERM:02 is registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (58 C) sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 Linux agpgart interface v0.103 ACPI: ACPI Dock Station Driver sony-laptop: Sony Notebook Control Driver v0.6. input: Sony Vaio Keys as /class/input/input4 input: Sony Vaio Jogdial as /class/input/input5 sony-laptop: detected Sony Vaio C Series intel_rng: FWH not detected Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Yenta: CardBus bridge found at 0000:0a:03.0 [104d:820f] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:0a:03.0, mfunc 0x01121b22, devctl 0x64 Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb usbcore: registered new interface driver hiddev input: Razer Razer Diamonback Optical Mouse as /class/input/input6 input,hidraw0: USB HID v1.10 Mouse [Razer Razer Diamonback Optical Mouse] on usb-0000:00:1d.1-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver input: PC Speaker as /class/input/input7 Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff PCI: Enabling device 0000:0a:03.2 (0000 -> 0002) ACPI: PCI Interrupt 0000:0a:03.2[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Enabling device 0000:0a:03.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:0a:03.1[A] -> GSI 16 (level, low) -> IRQ 16 firewire_ohci: Added fw-ohci device 0000:0a:03.1, OHCI version 1.10 input: PS/2 Mouse as /class/input/input8 input: AlpsPS/2 ALPS GlidePoint as /class/input/input9 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. firewire_core: created device fw0: GUID 080046030250bcbf, S400 EXT3 FS on sda6, internal journal fuse init (API version 7.9) Adding 1020088k swap on /dev/sda5. Priority:-1 extents:1 across:1020088k scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 sd 4:0:0:0: [sdb] Attached SCSI removable disk sd 4:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100002, writing 100006) sky2 eth0: enabling interface Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized