[ 0.000000] Linux version 2.6.24-12-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff40000 (usable) [ 0.000000] BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130880) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130880 [ 0.000000] HighMem 130880 -> 130880 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130880 [ 0.000000] On node 0 totalpages: 130880 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125794 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F5DF0 checksum 0 [ 0.000000] ACPI: RSDP 000F5DF0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 1FF40000, 002C (r1 A M I OEMRSDT 3000528 MSFT 97) [ 0.000000] ACPI: FACP 1FF40200, 0081 (r1 A M I OEMFACP 3000528 MSFT 97) [ 0.000000] ACPI: DSDT 1FF40400, 6504 (r1 1ABSP 1ABSP001 1 MSFT 2000001) [ 0.000000] ACPI: FACS 1FF50000, 0040 [ 0.000000] ACPI: OEMB 1FF50040, 0053 (r1 A M I OEMBIOS 3000528 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129858 [ 0.000000] Kernel command line: root=UUID=775b3756-d2b9-4028-b0d7-c63df5dab099 ro nolapic quiet splash [ 0.000000] mapped APIC to ffffb000 (0140d000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1600.152 MHz processor. [ 24.103423] Console: colour VGA+ 80x25 [ 24.103427] console [tty0] enabled [ 24.103744] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 24.104046] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 24.117115] Memory: 507028k/523520k available (2164k kernel code, 15920k reserved, 1007k data, 364k init, 0k highmem) [ 24.117124] virtual kernel memory layout: [ 24.117125] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 24.117127] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 24.117128] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 24.117129] lowmem : 0xc0000000 - 0xdff40000 ( 511 MB) [ 24.117131] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 24.117132] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB) [ 24.117133] .text : 0xc0100000 - 0xc031d1bd (2164 kB) [ 24.117137] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 24.117177] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 24.197082] Calibrating delay using timer specific routine.. 3202.48 BogoMIPS (lpj=6404979) [ 24.197112] Security Framework initialized [ 24.197120] SELinux: Disabled at boot. [ 24.197136] AppArmor: AppArmor initialized [ 24.197141] Failure registering capabilities with primary security module. [ 24.197149] Mount-cache hash table entries: 512 [ 24.197288] CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 24.197302] CPU: L1 I cache: 32K, L1 D cache: 32K [ 24.197305] CPU: L2 cache: 2048K [ 24.197309] CPU: After all inits, caps: afe9fbbf 00000000 00000000 00002040 00000180 00000000 00000000 00000000 [ 24.197318] Compat vDSO mapped to ffffe000. [ 24.197331] Checking 'hlt' instruction... OK. [ 24.213458] SMP alternatives: switching to UP code [ 24.215441] Freeing SMP alternatives: 11k freed [ 24.215554] Early unpacking initramfs... done [ 24.593568] ACPI: Core revision 20070126 [ 24.593648] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 24.596921] ACPI: setting ELCR to 0200 (from 0c30) [ 25.414954] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06 [ 25.414960] SMP motherboard not detected. [ 25.414962] Local APIC not detected. Using dummy APIC emulation. [ 25.415005] Brought up 1 CPUs [ 25.415025] CPU0 attaching sched-domain: [ 25.415028] domain 0: span 01 [ 25.415030] groups: 01 [ 25.415206] net_namespace: 64 bytes [ 25.415219] Booting paravirtualized kernel on bare hardware [ 25.415728] Time: 10:27:54 Date: 03/18/08 [ 25.415779] NET: Registered protocol family 16 [ 25.415975] EISA bus registered [ 25.415991] ACPI: bus type pci registered [ 25.417230] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 25.417232] PCI: Using configuration type 1 [ 25.417234] Setting up standard PCI resources [ 25.429009] ACPI: EC: Look up EC in DSDT [ 25.432692] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 25.439518] ACPI: Interpreter enabled [ 25.439521] ACPI: (supports S0 S3 S4 S5) [ 25.439539] ACPI: Using PIC for interrupt routing [ 25.447684] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 25.447687] ACPI: EC: driver started in interrupt mode [ 25.447800] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.448182] PCI: Enabled i801 SMBus device [ 25.448187] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 25.448190] PCI quirk: region 0500-053f claimed by ICH4 GPIO [ 25.448757] PCI: Transparent bridge - 0000:00:1e.0 [ 25.448858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.449026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 25.449170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 25.451457] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) [ 25.451670] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12) [ 25.451878] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12) [ 25.452085] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10) [ 25.452291] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled. [ 25.452498] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled. [ 25.452705] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled. [ 25.452912] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12) [ 25.453066] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.453097] pnp: PnP ACPI init [ 25.453104] ACPI: bus type pnp registered [ 25.458508] pnp: PnP ACPI: found 15 devices [ 25.458510] ACPI: ACPI bus type pnp unregistered [ 25.458514] PnPBIOS: Disabled by ACPI PNP [ 25.458725] PCI: Using ACPI for IRQ routing [ 25.458728] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.475207] NET: Registered protocol family 8 [ 25.475210] NET: Registered protocol family 20 [ 25.475269] AppArmor: AppArmor Filesystem Enabled [ 25.479193] Time: tsc clocksource has been installed. [ 25.487222] system 00:09: ioport range 0x480-0x48f has been reserved [ 25.487225] system 00:09: ioport range 0x5c0-0x5cf has been reserved [ 25.487231] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 25.487237] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved [ 25.487246] system 00:0d: ioport range 0x540-0x55f has been reserved [ 25.487249] system 00:0d: ioport range 0x400-0x47f has been reserved [ 25.487252] system 00:0d: ioport range 0x480-0x48f has been reserved [ 25.487255] system 00:0d: ioport range 0x500-0x53f has been reserved [ 25.487258] system 00:0d: ioport range 0x4c0-0x4cf has been reserved [ 25.487261] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 25.487264] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 25.487270] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 25.487273] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved [ 25.487277] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 25.487280] system 00:0e: iomem range 0x100000-0x1fffffff could not be reserved [ 25.487283] system 00:0e: iomem range 0x0-0x0 could not be reserved [ 25.517649] PCI: Bridge: 0000:00:01.0 [ 25.517652] IO window: d000-dfff [ 25.517655] MEM window: ff800000-ff8fffff [ 25.517658] PREFETCH window: ce900000-de9fffff [ 25.517673] PCI: Bus 3, cardbus bridge: 0000:02:01.0 [ 25.517676] IO window: 00001000-000010ff [ 25.517679] IO window: 00001400-000014ff [ 25.517683] PREFETCH window: 34000000-37ffffff [ 25.517687] MEM window: 38000000-3bffffff [ 25.517691] PCI: Bus 7, cardbus bridge: 0000:02:01.1 [ 25.517693] IO window: 00001800-000018ff [ 25.517696] IO window: 00001c00-00001cff [ 25.517700] PREFETCH window: 3c000000-3fffffff [ 25.517704] MEM window: 40000000-43ffffff [ 25.517707] PCI: Bridge: 0000:00:1e.0 [ 25.517709] IO window: disabled. [ 25.517713] MEM window: ff900000-ff9fffff [ 25.517717] PREFETCH window: dea00000-deafffff [ 25.517732] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 25.517744] PCI: Enabling device 0000:02:01.0 (0000 -> 0003) [ 25.518013] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4 [ 25.518017] PCI: setting IRQ 4 as level-triggered [ 25.518021] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 25.518028] PCI: Setting latency timer of device 0000:02:01.0 to 64 [ 25.518293] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 25.518296] PCI: setting IRQ 11 as level-triggered [ 25.518299] ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 25.518305] PCI: Setting latency timer of device 0000:02:01.1 to 64 [ 25.518316] NET: Registered protocol family 2 [ 25.555146] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 25.555348] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 25.555457] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 25.555570] TCP: Hash tables configured (established 16384 bind 16384) [ 25.555573] TCP reno registered [ 25.567176] checking if image is initramfs... it is [ 26.018422] Switched to high resolution mode on CPU 0 [ 26.315648] Freeing initrd memory: 7295k freed [ 26.316239] audit: initializing netlink socket (disabled) [ 26.316258] audit(1205836073.392:1): initialized [ 26.318495] VFS: Disk quotas dquot_6.5.1 [ 26.318578] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 26.318732] io scheduler noop registered [ 26.318735] io scheduler anticipatory registered [ 26.318737] io scheduler deadline registered [ 26.318750] io scheduler cfq registered (default) [ 26.318819] Boot video device is 0000:01:00.0 [ 26.319118] isapnp: Scanning for PnP cards... [ 26.672445] isapnp: No Plug & Play device found [ 26.700583] Real Time Clock Driver v1.12ac [ 26.700706] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.700887] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 26.701637] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 26.701647] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 26.702276] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.702355] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 26.702457] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 [ 26.704660] i8042.c: Detected active multiplexing controller, rev 1.1. [ 26.705833] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.705838] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 26.705840] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 26.705843] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 26.705846] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 26.713404] mice: PS/2 mouse device common for all mice [ 26.713514] EISA: Probing bus 0 at eisa.0 [ 26.713522] Cannot allocate resource for EISA slot 1 [ 26.713551] EISA: Detected 0 cards. [ 26.713554] cpuidle: using governor ladder [ 26.713556] cpuidle: using governor menu [ 26.713656] NET: Registered protocol family 1 [ 26.713685] Using IPI No-Shortcut mode [ 26.713725] registered taskstats version 1 [ 26.713824] Magic number: 0:319:477 [ 26.713934] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 26.713936] EDD information not available. [ 26.714205] Freeing unused kernel memory: 364k freed [ 26.749274] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 27.922067] fuse init (API version 7.9) [ 27.943040] ACPI: Invalid PBLK length [7] [ 27.943873] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 27.951671] ACPI: Thermal Zone [THRM] (37 C) [ 28.678391] usbcore: registered new interface driver usbfs [ 28.678417] usbcore: registered new interface driver hub [ 28.686334] usbcore: registered new device driver usb [ 28.706307] USB Universal Host Controller Interface driver v3.0 [ 28.706377] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 28.706391] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 28.706396] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 28.706779] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 28.706806] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800 [ 28.706945] usb usb1: configuration #1 chosen from 1 choice [ 28.706971] hub 1-0:1.0: USB hub found [ 28.706976] hub 1-0:1.0: 2 ports detected [ 28.766414] SCSI subsystem initialized [ 28.811654] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 28.811659] PCI: setting IRQ 5 as level-triggered [ 28.811663] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 28.811676] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 28.811681] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 28.811706] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 28.811731] uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880 [ 28.811847] usb usb2: configuration #1 chosen from 1 choice [ 28.811872] hub 2-0:1.0: USB hub found [ 28.811878] hub 2-0:1.0: 2 ports detected [ 28.862250] libata version 3.00 loaded. [ 28.914399] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 28.914405] PCI: setting IRQ 10 as level-triggered [ 28.914409] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 28.914423] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 28.914428] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 28.914453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 28.914478] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000ec00 [ 28.914589] usb usb3: configuration #1 chosen from 1 choice [ 28.914615] hub 3-0:1.0: USB hub found [ 28.914621] hub 3-0:1.0: 2 ports detected [ 29.018336] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 29.018342] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 29.018357] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 29.018361] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 29.018387] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 29.022278] ehci_hcd 0000:00:1d.7: debug port 1 [ 29.022284] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 29.022292] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffaffc00 [ 29.037799] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.037925] usb usb4: configuration #1 chosen from 1 choice [ 29.037951] hub 4-0:1.0: USB hub found [ 29.037957] hub 4-0:1.0: 6 ports detected [ 29.141792] tg3.c:v3.86 (November 9, 2007) [ 29.141820] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 29.228895] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:2f:b5:41:dd [ 29.228903] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 29.228906] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 29.228922] ata_piix 0000:00:1f.1: version 2.12 [ 29.228935] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 29.228941] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 29.228981] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 29.229254] scsi0 : ata_piix [ 29.229825] scsi1 : ata_piix [ 29.231322] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 29.231325] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 29.394935] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100 [ 29.394940] ata1.00: 117210240 sectors, multi 16: LBA48 [ 29.410828] ata1.00: configured for UDMA/100 [ 29.730233] ata2.00: ATAPI: MATSHITADVD-RAM UJ-830S, 1.00, max UDMA/33 [ 29.772654] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 29.900812] ata2.00: configured for UDMA/33 [ 29.900950] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5 [ 29.903044] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-830S 1.00 PQ: 0 ANSI: 5 [ 29.905880] ACPI: PCI Interrupt 0000:02:01.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 29.958540] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[ff9df800-ff9dffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 29.981647] Driver 'sd' needs updating - please use bus_type methods [ 29.981735] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 29.981748] sd 0:0:0:0: [sda] Write Protect is off [ 29.981751] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.981767] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.981818] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 29.981828] sd 0:0:0:0: [sda] Write Protect is off [ 29.981831] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.981847] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.981850] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 30.005828] usb 2-2: configuration #1 chosen from 1 choice [ 30.011768] sda1 sda2 <<6>usbcore: registered new interface driver hiddev [ 30.033767] sda5<6>input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2 [ 30.049358] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2 [ 30.049372] usbcore: registered new interface driver usbhid [ 30.049375] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 30.057337] sda6 sda7 sda8 > [ 30.085497] sd 0:0:0:0: [sda] Attached SCSI disk [ 30.092175] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 30.092195] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 30.098172] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 30.098176] Uniform CD-ROM driver Revision: 3.20 [ 30.098222] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 30.483856] Attempting manual resume [ 30.483861] swsusp: Resume From Partition 8:8 [ 30.483863] PM: Checking swsusp image. [ 30.484015] PM: Resume from disk failed. [ 30.528628] kjournald starting. Commit interval 5 seconds [ 30.528638] EXT3-fs: mounted filesystem with ordered data mode. [ 31.238531] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000321aef3] [ 46.970420] iTCO_vendor_support: vendor-support=0 [ 47.018341] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 47.018426] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0460) [ 47.018457] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 47.158313] parport_pc 00:08: reported by Plug and Play ACPI [ 47.158412] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 47.226054] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 47.274000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 47.331405] Linux agpgart interface v0.102 [ 47.401813] agpgart: Detected an Intel 855PM Chipset. [ 47.415455] agpgart: AGP aperture is 256M @ 0xe0000000 [ 47.615571] irda_init() [ 47.615591] NET: Registered protocol family 23 [ 47.740099] intel_rng: FWH not detected [ 47.781094] input: Power Button (FF) as /devices/virtual/input/input3 [ 47.809145] ACPI: Power Button (FF) [PWRF] [ 47.809227] input: Lid Switch as /devices/virtual/input/input4 [ 47.825210] ACPI: Lid Switch [LID] [ 47.825266] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 47.857077] ACPI: Sleep Button (CM) [SLPB] [ 47.857143] input: Power Button (CM) as /devices/virtual/input/input6 [ 47.885023] ACPI: Power Button (CM) [PWRB] [ 47.885561] ACPI: AC Adapter [AC] (on-line) [ 47.989053] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 47.989084] nsc-ircc, chip->init [ 47.989092] nsc-ircc, Found chip at base=0x02e [ 47.989116] nsc-ircc, driver loaded (Dag Brattli) [ 47.989122] nsc_ircc_open(), can't get iobase of 0x2f8 [ 47.989148] nsc-ircc, Found chip at base=0x02e [ 47.989171] nsc-ircc, driver loaded (Dag Brattli) [ 47.989174] nsc_ircc_open(), can't get iobase of 0x2f8 [ 47.989612] nsc-ircc 00:07: disabled [ 48.230491] ACPI: Battery Slot [BAT0] (battery present) [ 48.230563] ACPI: Battery Slot [BAT1] (battery absent) [ 48.230659] asus-laptop: Asus Laptop Support version 0.42 [ 48.230814] asus-laptop: M6NE model detected [ 48.236483] Registered led device: asus:mail [ 48.822791] Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0 [ 48.861201] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 49.702947] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/LNXVIDEO:00/input/input8 [ 49.730225] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 49.950209] Yenta: CardBus bridge found at 0000:02:01.0 [1043:1864] [ 49.978807] ieee80211_crypt: registered algorithm 'NULL' [ 50.009778] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 50.009782] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 50.070837] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 50.070841] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 50.077905] Yenta: ISA IRQ mask 0x0008, PCI irq 4 [ 50.077908] Socket status: 30000006 [ 50.077911] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 50.077918] pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff [ 50.077922] pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffff [ 50.105770] Yenta: CardBus bridge found at 0000:02:01.1 [1043:1864] [ 50.233675] Yenta: ISA IRQ mask 0x0008, PCI irq 11 [ 50.233680] Socket status: 30000006 [ 50.233683] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 50.233689] pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff [ 50.233692] pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffff [ 50.257442] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 50.293326] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 51.752241] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 51.752296] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 51.752321] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 52.080541] cs: IO port probe 0x100-0x3af: clean. [ 52.082274] cs: IO port probe 0x3e0-0x4ff: clean. [ 52.082627] cs: IO port probe 0x820-0x8ff: clean. [ 52.083250] cs: IO port probe 0xc00-0xcf7: clean. [ 52.084036] cs: IO port probe 0xa00-0xaff: clean. [ 52.084874] cs: IO port probe 0x100-0x3af: clean. [ 52.086616] cs: IO port probe 0x3e0-0x4ff: clean. [ 52.086954] cs: IO port probe 0x820-0x8ff: clean. [ 52.087577] cs: IO port probe 0xc00-0xcf7: clean. [ 52.088364] cs: IO port probe 0xa00-0xaff: clean. [ 52.577836] intel8x0_measure_ac97_clock: measured 55460 usecs [ 52.577839] intel8x0: clocking to 48000 [ 53.237648] lp0: using parport0 (interrupt-driven). [ 53.351878] Adding 746980k swap on /dev/sda8. Priority:-1 extents:1 across:746980k [ 53.979946] EXT3 FS on sda6, internal journal [ 56.896648] ip_tables: (C) 2000-2006 Netfilter Core Team [ 57.415069] No dock devices found. [ 57.428033] ACPI: \_SB_.PCI0.IDE0.CHN1.DRV0: found ejectable bay [ 57.428041] ACPI: \_SB_.PCI0.IDE0.CHN1.DRV0: Adding notify handler [ 57.428076] ACPI: Error installing bay notify handler [ 57.428079] ACPI: Bay [\_SB_.PCI0.IDE0.CHN1.DRV0] Added [ 60.107595] ppdev: user-space parallel port driver [ 60.822723] audit(1205832509.728:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5009 profile="/usr/sbin/cupsd" namespace="default" [ 60.995505] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 60.995510] apm: overridden by ACPI. [ 97.984976] Marking TSC unstable due to: cpufreq changes. [ 97.991291] Time: acpi_pm clocksource has been installed. [ 163.717211] Clocksource tsc unstable (delta = -140896339 ns) [ 62.560519] ttyS1: LSR safety check engaged! [ 168.726677] Bluetooth: Core ver 2.11 [ 168.730899] NET: Registered protocol family 31 [ 168.730908] Bluetooth: HCI device and connection manager initialized [ 168.730917] Bluetooth: HCI socket layer initialized [ 63.272279] Bluetooth: L2CAP ver 2.9 [ 63.272284] Bluetooth: L2CAP socket layer initialized [ 169.229719] Bluetooth: RFCOMM socket layer initialized [ 169.229743] Bluetooth: RFCOMM TTY layer initialized [ 169.229749] Bluetooth: RFCOMM ver 1.8 [ 174.824698] [drm] Initialized drm 1.1.0 20060810 [ 174.871336] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 174.872204] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 65.936361] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 65.936859] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 65.937308] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 177.383689] [drm] Setting GART location based on new memory map [ 177.383707] [drm] Loading R300 Microcode [ 177.383765] [drm] writeback test succeeded in 2 usecs [ 205.653976] NET: Registered protocol family 10 [ 205.655413] lo: Disabled Privacy Extensions [ 205.657212] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 205.658631] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 87.410104] NET: Registered protocol family 17 [ 87.453825] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 239.290397] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 241.641648] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 152.613430] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 409.654273] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 156.559358] ieee80211_crypt: registered algorithm 'CCMP' [ 156.710639] padlock: VIA PadLock not detected. [ 423.751923] ieee80211_crypt: registered algorithm 'TKIP' [ 424.946857] eth1: no IPv6 routers present [ 438.886905] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 504.725226] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 534.675820] eth1: no IPv6 routers present [ 285.561552] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 286.645386] Syncing filesystems ... done. [ 286.645619] PM: Preparing system for mem sleep [ 286.646035] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 286.647126] Freezing remaining freezable tasks ... (elapsed 0.09 seconds) done. [ 286.744871] PM: Entering mem sleep [ 286.744873] Suspending console(s) [ 286.744877] drm_sysfs_suspend [ 286.760859] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 286.932349] sd 0:0:0:0: [sda] Stopping disk [ 287.888924] parport_pc 00:08: disabled [ 287.888935] eth1: Going into suspend... [ 287.889852] ACPI: PCI interrupt for device 0000:02:02.0 disabled [ 287.923940] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 287.924079] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 287.924168] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 287.939607] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 287.939634] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 287.939661] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 287.940445] Disabling non-boot CPUs ... [ 0.307342] Back to C! [ 0.308797] PCI: Enabled i801 SMBus device [ 1.251146] PM: Writing back config space on device 0000:00:00.0 at offset b (was 0, writing 186a1043) [ 1.251182] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.251189] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1.251227] usb usb1: root hub lost power or was reset [ 1.251242] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 1.251248] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1.251284] usb usb2: root hub lost power or was reset [ 1.251310] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 1.251316] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1.251352] usb usb3: root hub lost power or was reset [ 1.266891] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 1.266898] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.266952] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 40020200, writing 400a0200) [ 1.266967] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1.267001] PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000) [ 1.267014] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007) [ 1.267024] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 1.267030] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 1.268943] ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] [ 1.268948] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ddcb2048), AE_AML_OPERAND_VALUE [ 1.268989] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV1._GTF] (Node ddcb1df8), AE_AML_OPERAND_VALUE [ 1.269029] ata1.01: _GTF evaluation failed (AE 0x3006) [ 1.270856] ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] [ 1.270876] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ddcb2048), AE_AML_OPERAND_VALUE [ 1.270916] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV1._GTF] (Node ddcb1ee8), AE_AML_OPERAND_VALUE [ 1.270956] ata2.01: _GTF evaluation failed (AE 0x3006) [ 1.271102] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003) [ 1.271115] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 1.271122] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 1.590949] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 1.590953] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 1.762692] ata2.00: configured for UDMA/33 [ 1.838551] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [ 1.838554] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 1.838872] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 1.862737] ata1.00: configured for UDMA/100 [ 1.886728] ata1.00: configured for UDMA/100 [ 1.886730] ata1: EH complete [ 1.886765] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 1.886779] sd 0:0:0:0: [sda] Write Protect is off [ 1.886781] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.886799] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.886816] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 1.886825] sd 0:0:0:0: [sda] Write Protect is off [ 1.886827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.886843] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.283351] PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2900005, writing 2900001) [ 2.283377] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 2b00007, writing 2b00107) [ 2.283397] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 2.283449] PM: Writing back config space on device 0000:02:01.0 at offset f (was 7000100, writing 5800100) [ 2.283454] PM: Writing back config space on device 0000:02:01.0 at offset e (was 0, writing 14fc) [ 2.283459] PM: Writing back config space on device 0000:02:01.0 at offset d (was 0, writing 1400) [ 2.283463] PM: Writing back config space on device 0000:02:01.0 at offset c (was 0, writing 10fc) [ 2.283468] PM: Writing back config space on device 0000:02:01.0 at offset b (was 0, writing 1000) [ 2.283473] PM: Writing back config space on device 0000:02:01.0 at offset a (was 0, writing 3bfff000) [ 2.283478] PM: Writing back config space on device 0000:02:01.0 at offset 9 (was 0, writing 38000000) [ 2.283482] PM: Writing back config space on device 0000:02:01.0 at offset 8 (was 0, writing 37fff000) [ 2.283487] PM: Writing back config space on device 0000:02:01.0 at offset 7 (was 0, writing 34000000) [ 2.283492] PM: Writing back config space on device 0000:02:01.0 at offset 6 (was 0, writing b0060302) [ 2.283498] PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing ff900000) [ 2.283503] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 820000, writing 82a800) [ 2.283509] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2100000, writing 2100007) [ 2.283605] PM: Writing back config space on device 0000:02:01.1 at offset f (was 7000200, writing 58002ff) [ 2.283609] PM: Writing back config space on device 0000:02:01.1 at offset e (was 0, writing 1cfc) [ 2.283614] PM: Writing back config space on device 0000:02:01.1 at offset d (was 0, writing 1c00) [ 2.283619] PM: Writing back config space on device 0000:02:01.1 at offset c (was 0, writing 18fc) [ 2.283624] PM: Writing back config space on device 0000:02:01.1 at offset b (was 0, writing 1800) [ 2.283628] PM: Writing back config space on device 0000:02:01.1 at offset a (was 0, writing 43fff000) [ 2.283633] PM: Writing back config space on device 0000:02:01.1 at offset 9 (was 0, writing 40000000) [ 2.283638] PM: Writing back config space on device 0000:02:01.1 at offset 8 (was 0, writing 3ffff000) [ 2.283643] PM: Writing back config space on device 0000:02:01.1 at offset 7 (was 0, writing 3c000000) [ 2.283648] PM: Writing back config space on device 0000:02:01.1 at offset 6 (was 0, writing b00a0702) [ 2.283653] PM: Writing back config space on device 0000:02:01.1 at offset 4 (was 0, writing ff901000) [ 2.283658] PM: Writing back config space on device 0000:02:01.1 at offset 3 (was 820000, writing 82a800) [ 2.283664] PM: Writing back config space on device 0000:02:01.1 at offset 1 (was 2100000, writing 2100007) [ 2.297781] PM: Writing back config space on device 0000:02:01.2 at offset 4 (was 0, writing ff9df800) [ 2.297786] PM: Writing back config space on device 0000:02:01.2 at offset 3 (was 800000, writing 804000) [ 2.297792] PM: Writing back config space on device 0000:02:01.2 at offset 1 (was 2100000, writing 2100106) [ 2.350369] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[ff9df800-ff9dffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.360136] eth1: Coming out of suspend... [ 2.373687] PCI: Enabling device 0000:02:02.0 (0000 -> 0002) [ 2.373692] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 2.373701] PM: Writing back config space on device 0000:02:02.0 at offset f (was 18030100, writing 18030104) [ 2.373717] PM: Writing back config space on device 0000:02:02.0 at offset 4 (was 0, writing ff9de000) [ 2.373722] PM: Writing back config space on device 0000:02:02.0 at offset 3 (was 0, writing 4010) [ 2.373728] PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2900002, writing 2900116) [ 2.492456] i8042 kbd 00:03: activation failed [ 2.492586] i8042 aux 00:04: activation failed [ 2.494267] parport_pc 00:08: activated [ 3.556405] sd 0:0:0:0: [sda] Starting disk [ 3.586626] PM: Finishing wakeup. [ 3.586628] Restarting tasks ... <6>usb 2-2: USB disconnect, address 2 [ 3.641306] done. [ 3.896074] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 4.096519] usb 2-2: configuration #1 chosen from 1 choice [ 4.119668] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input9 [ 4.147844] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2 [ 7.157562] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.487626] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.666170] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 16.666201] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 16.666243] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 16.666290] [drm] Loading R300 Microcode [ 15.825446] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 65.190053] eth1: no IPv6 routers present