che: 12K uops, L1 D cache: 16K
[   24.101851] CPU: L2 cache: 1024K
[   24.101854] CPU: Physical Processor ID: 0
[   24.101857] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
[   24.101864] Intel machine check architecture supported.
[   24.101871] Intel machine check reporting enabled on CPU#1.
[   24.101874] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[   24.101879] CPU1: Thermal monitoring enabled
[   24.102148] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[   24.102196] Total of 2 processors activated (11971.66 BogoMIPS).
[   24.102322] ENABLING IO-APIC IRQs
[   24.102491] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   24.112498] WARNING: at arch/x86/kernel/smp_32.c:561 native_smp_call_function_mask()
[   24.112504] Pid: 1, comm: swapper Not tainted 2.6.24-build-0021 #4
[   24.112509]  [<c011188d>] native_smp_call_function_mask+0x43/0xf7
[   24.112519]  [<c0113974>] enable_NMI_through_LVT0+0x0/0x28
[   24.112525]  [<c0113974>] enable_NMI_through_LVT0+0x0/0x28
[   24.112530]  [<c0113974>] enable_NMI_through_LVT0+0x0/0x28
[   24.112535]  [<c0112b2a>] smp_call_function+0x1c/0x22
[   24.112539]  [<c0126716>] on_each_cpu+0x18/0x27
[   24.112544]  [<c01149d2>] setup_nmi+0x30/0x47
[   24.112549]  [<c038d538>] setup_IO_APIC+0x804/0xd42
[   24.112556]  [<c01f27ba>] vsnprintf+0x442/0x47e
[   24.112563]  [<c0122b1d>] release_console_sem+0x181/0x19a
[   24.112570]  [<c038adb2>] native_smp_prepare_cpus+0x49d/0x4ad
[   24.112576]  [<c0124643>] release_task+0x1f6/0x26f
[   24.112582]  [<c011cb8d>] task_rq_lock+0x28/0x4b
[   24.112586]  [<c011ed0e>] set_cpus_allowed+0x86/0x8e
[   24.112591]  [<c0384349>] kernel_init+0x0/0x2a2
[   24.112596]  [<c038439b>] kernel_init+0x52/0x2a2
[   24.112600]  [<c011f789>] schedule_tail+0x18/0x52
[   24.112605]  [<c0104cb6>] ret_from_fork+0x6/0x1c
[   24.112610]  [<c0384349>] kernel_init+0x0/0x2a2
[   24.112615]  [<c0384349>] kernel_init+0x0/0x2a2
[   24.112619]  [<c01059bb>] kernel_thread_helper+0x7/0x10
[   24.112625]  =======================
[   24.213748] APIC timer registered as dummy, due to nmi_watchdog=1!
[   24.213853] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   24.233857] Brought up 2 CPUs
[   24.234075] net_namespace: 64 bytes
[   24.234547] NET: Registered protocol family 16
[   24.234720] ACPI: bus type pci registered
[   24.236178] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[   24.236181] PCI: Using configuration type 1
[   24.236183] Setting up standard PCI resources
[   24.245570] ACPI: EC: Look up EC in DSDT
[   24.249477] ACPI: Interpreter enabled
[   24.249480] ACPI: (supports S0 S5)
[   24.249488] ACPI: Using IOAPIC for interrupt routing
[   24.255862] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   24.256337] Force enabled HPET at base address 0xfed00000
[   24.256343] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[   24.256347] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[   24.256751] PCI: Transparent bridge - 0000:00:1e.0
[   24.256773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   24.256880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   24.258981] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   24.259137] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[   24.259289] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   24.259441] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   24.259600] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   24.259762] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   24.259918] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   24.260071] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[   24.260218] ACPI: Power Resource [URP1] (off)
[   24.260252] ACPI: Power Resource [FDDP] (off)
[   24.260285] ACPI: Power Resource [LPTP] (off)
[   24.260341] Linux Plug and Play Support v0.97 (c) Adam Belay
[   24.260378] pnp: PnP ACPI init
[   24.260387] ACPI: bus type pnp registered
[   24.264370] pnp: PnP ACPI: found 12 devices
[   24.264374] ACPI: ACPI bus type pnp unregistered
[   24.264584] SCSI subsystem initialized
[   24.264723] PCI: Using ACPI for IRQ routing
[   24.264727] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   24.271815] hpet clockevent registered
[   24.271821] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   24.271826] hpet0: 3 64-bit timers, 14318180 Hz
[   24.272857] ACPI: RTC can wake from S4
[   24.273818] Time: tsc clocksource has been installed.
[   24.275867] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   24.275876] system 00:0a: ioport range 0x400-0x47f has been reserved
[   24.275880] system 00:0a: ioport range 0x680-0x6ff has been reserved
[   24.275882] system 00:0a: ioport range 0x500-0x53f has been reserved
[   24.275886] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[   24.275889] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[   24.275892] system 00:0a: iomem range 0xfed20000-0xfed9ffff could not be reserved
[   24.275900] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[   24.275903] system 00:0b: iomem range 0xc0000-0xd7fff could not be reserved
[   24.275906] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[   24.275909] system 00:0b: iomem range 0x100000-0x3effffff could not be reserved
[   24.275912] system 00:0b: iomem range 0x0-0x0 could not be reserved
[   24.306344] PCI: Bridge: 0000:00:1e.0
[   24.306348]   IO window: b000-bfff
[   24.306353]   MEM window: ff800000-ff8fffff
[   24.306357]   PREFETCH window: disabled.
[   24.306370] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   24.306381] NET: Registered protocol family 2
[   24.315871] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   24.316168] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   24.316691] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   24.317043] TCP: Hash tables configured (established 131072 bind 65536)
[   24.317046] TCP reno registered
[   24.418727] Machine check exception polling timer started.
[   24.419219] highmem bounce pool size: 64 pages
[   24.421508] JFFS2 version 2.2. (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   24.421965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[   24.421969] io scheduler noop registered
[   24.421982] io scheduler cfq registered (default)
[   24.421993] Boot video device is 0000:00:02.0
[   24.450221] Driver 'sd' needs updating - please use bus_type methods
[   24.450404] PNP: No PS/2 controller found. Probing ports directly.
[   24.453335] serio: i8042 KBD port at 0x60,0x64 irq 1
[   24.453342] serio: i8042 AUX port at 0x60,0x64 irq 12
[   24.453481] mice: PS/2 mouse device common for all mice
[   24.453643] device-mapper: uevent: version 1.0.3
[   24.453684] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[   24.453697] cpuidle: using governor ladder
[   24.453700] cpuidle: using governor menu
[   24.453705] TCP cubic registered
[   24.453726] NET: Registered protocol family 1
[   24.453739] NET: Registered protocol family 17
[   24.453745] Testing NMI watchdog ... OK.
[   24.473748] Using IPI No-Shortcut mode
[   24.477863] Freeing unused kernel memory: 5556k freed
[   24.772539] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
[   24.772553] Could not switch to high resolution mode on CPU 1
[   24.772559]  lapic is not functional.
[   24.772563] Could not switch to high resolution mode on CPU 0
[   24.962064] usbcore: registered new interface driver usbfs
[   24.962141] usbcore: registered new interface driver hub
[   24.962195] usbcore: registered new device driver usb
[   25.021482] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   25.081809] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
[   25.081824] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   25.081828] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   25.082160] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   25.086052] ehci_hcd 0000:00:1d.7: debug port 1
[   25.086059] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   25.086069] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa7fc00
[   25.095361] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   25.095559] usb usb1: configuration #1 chosen from 1 choice
[   25.095612] hub 1-0:1.0: USB hub found
[   25.095620] hub 1-0:1.0: 8 ports detected
[   25.256014] USB Universal Host Controller Interface driver v3.0
[   25.256105] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
[   25.256116] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   25.256120] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   25.256177] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   25.256203] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000c800
[   25.256389] usb usb2: configuration #1 chosen from 1 choice
[   25.256446] hub 2-0:1.0: USB hub found
[   25.256453] hub 2-0:1.0: 2 ports detected
[   25.357347] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[   25.357355] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   25.357359] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   25.357409] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   25.357431] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000cc00
[   25.357591] usb usb3: configuration #1 chosen from 1 choice
[   25.357641] hub 3-0:1.0: USB hub found
[   25.357648] hub 3-0:1.0: 2 ports detected
[   25.458288] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[   25.458296] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   25.458299] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   25.458347] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   25.458369] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000d000
[   25.458529] usb usb4: configuration #1 chosen from 1 choice
[   25.458579] hub 4-0:1.0: USB hub found
[   25.458587] hub 4-0:1.0: 2 ports detected
[   25.559230] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
[   25.559238] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   25.559242] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   25.559290] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[   25.559310] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000d400
[   25.559478] usb usb5: configuration #1 chosen from 1 choice
[   25.559528] hub 5-0:1.0: USB hub found
[   25.559535] hub 5-0:1.0: 2 ports detected
[   25.720182] usbcore: registered new interface driver usbhid
[   25.720191] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   25.791653] libata version 3.00 loaded.
[   25.851764] ata_piix 0000:00:1f.1: version 2.12
[   25.851782] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   25.851789] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[   25.851829] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   25.851902] scsi0 : ata_piix
[   25.851997] scsi1 : ata_piix
[   25.852905] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   25.852908] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   26.007117] ata1.00: ATA-4: FUJITSU MPD3064AT, DD-03-47, max UDMA/33
[   26.007121] ata1.00: 12672450 sectors, multi 16: LBA 
[   26.013040] ata1.00: configured for UDMA/33
[   26.163897] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MPD3064A DD-0 PQ: 0 ANSI: 5
[   26.164041] sd 0:0:0:0: [sda] 12672450 512-byte hardware sectors (6488 MB)
[   26.164058] sd 0:0:0:0: [sda] Write Protect is off
[   26.164062] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.164091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.164148] sd 0:0:0:0: [sda] 12672450 512-byte hardware sectors (6488 MB)
[   26.164165] sd 0:0:0:0: [sda] Write Protect is off
[   26.164168] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.164196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.164200]  sda: sda1 sda2
[   26.173853] sd 0:0:0:0: [sda] Attached SCSI disk
[   26.173962] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[   26.173981] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 19
[   26.174017] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   26.174052] scsi2 : ata_piix
[   26.174132] scsi3 : ata_piix
[   26.174904] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd800 irq 19
[   26.174908] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 19
[   28.669022] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[   28.669027] e100: Copyright(c) 1999-2006 Intel Corporation
[   28.730115] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   28.730122] Copyright (c) 1999-2006 Intel Corporation.
[   28.791201] 8139too Fast Ethernet driver 0.9.28
[   28.791985] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 20
[   28.793191] eth0: RealTek RTL8139 at 0xf8904c00, 00:0a:cd:14:6b:5d, IRQ 20
[   28.793195] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   28.793220] ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 21
[   28.794422] eth1: RealTek RTL8139 at 0xf890e800, 00:0a:cd:14:6b:67, IRQ 21
[   28.794425] eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
[   28.794448] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 19 (level, low) -> IRQ 18
[   28.795570] eth2: RealTek RTL8139 at 0xf8910400, 00:0a:cd:14:6b:6f, IRQ 18
[   28.795574] eth2:  Identified 8139 chip type 'RTL-8100B/8139D'
[   29.037041] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[   29.098106] sis900.c: v1.08.10 Apr. 2 2006
[   29.159192] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   29.404056] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[   29.559370] kjournald starting.  Commit interval 5 seconds
[   29.559379] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   29.560050] EXT3 FS on dm-0, internal journal
[   29.560055] EXT3-fs: mounted filesystem with ordered data mode.
[   30.386210] tun: Universal TUN/TAP device driver, 1.6
[   30.386214] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   30.448183] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   30.448188] All bugs added by David S. Miller <davem@redhat.com>
[   30.575868] ip_tables: (C) 2000-2006 Netfilter Core Team
[   30.698640] Netfilter messages via NETLINK v0.30.
[   30.764246] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   31.446830] u32 classifier
[   31.446834]     Performance counters on
[   31.446836]     input device check on 
[   31.446837]     Actions configured 
[   31.508102] Simple TC action Loaded
[   31.569579] netem: version 1.2
[   32.695174] Mirror/redirect action on
[   32.950247] GACT probability on
[   33.082653] IPv4 FIB: Using LC-trie version 0.408
[   33.122566] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   33.125057] eth1: link down
[   33.135427] eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
[   33.782335] PPP generic driver version 2.4.2
[   33.849556] NET: Registered protocol family 24
[   35.226167] warning: process `nginx' used the deprecated sysctl system call with 1.33.