Booting 'vmlinuz-linus' kernel /vmlinuz-linus root=/dev/sda3 console=tty0 console=ttyS0,115200n8 debug [Linux-bzImage, setup=0x2a00, size=0x253f18] Linux version 2.6.24-rc3-g2ffbb837 (lenb@s5000vsa) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #8 SMP Wed Nov 21 13:20:28 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007dfa0000 (usable) BIOS-e820: 000000007dfa0000 - 000000007dfae000 (ACPI data) BIOS-e820: 000000007dfae000 - 000000007dff0000 (ACPI NVS) BIOS-e820: 000000007dff0000 - 000000007e000000 (reserved) BIOS-e820: 00000000dfffc000 - 00000000dfffd000 (reserved) BIOS-e820: 00000000fed90000 - 00000000fed91000 (reserved) BIOS-e820: 00000000fed92000 - 00000000fed94000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1119MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 516000) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 516000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 516000 On node 0 totalpages: 516000 DMA zone: 40 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4056 pages, LIFO batch:0 Normal zone: 2200 pages used for memmap Normal zone: 223080 pages, LIFO batch:31 HighMem zone: 2799 pages used for memmap HighMem zone: 283825 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F93C0, 0014 (r0 ACPIAM) ACPI: RSDT 7DFA0000, 0048 (r1 080107 RSDT1024 20070801 MSFT 97) ACPI: FACP 7DFA0200, 0084 (r2 080107 FACP1024 20070801 MSFT 97) ACPI: DSDT 7DFA0490, 687F (r1 VVBLI9 VVBLI958 58 INTL 20051117) ACPI: FACS 7DFAE000, 0040 ACPI: APIC 7DFA0390, 006C (r1 080107 APIC1024 20070801 MSFT 97) ACPI: MCFG 7DFA0450, 003C (r1 080107 OEMMCFG 20070801 MSFT 97) ACPI: OEMB 7DFAE040, 008A (r1 080107 OEMB1024 20070801 MSFT 97) ACPI: ASF! 7DFA6D10, 0099 (r32 LEGEND I865PASF 1 INTL 20051117) ACPI: GSCI 7DFAE0D0, 2024 (r1 080107 GMCHSCI 20070801 MSFT 97) ACPI: iEIT 7DFB0100, 00B0 (r1 080107 EITTABLE 20070801 MSFT 97) ACPI: DMAR 7DFA6DB0, 0130 (r1 080107 OEMDMAR 1 MSFT 97) ACPI: SSDT 7DFB0C90, 0877 (r1 DpgPmm CpuPm 12 INTL 20051117) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7e000000:61ffc000) swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510961 Kernel command line: root=/dev/sda3 console=tty0 console=ttyS0,115200n8 debug mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c05a5000 soft=c059d000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2992.820 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2036592k/2064000k available (3092k kernel code, 26252k reserved, 1349k data, 248k init, 1146496k highmem) virtual kernel memory layout: fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc055c000 - 0xc059a000 ( 248 kB) .data : 0xc0405002 - 0xc055645c (1349 kB) .text : 0xc0100000 - 0xc0405002 (3092 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5990.44 BogoMIPS (lpj=11980894) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3fd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 967 Objects with 84 Devices 243 Methods 36 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 49 Objects with 0 Devices 8 Methods 1 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful CPU0: Intel Genuine Intel(R) CPU @ 3.00GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c05a6000 soft=c059e000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5985.26 BogoMIPS (lpj=11970529) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3fd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU @ 3.00GHz stepping 04 Total of 2 processors activated (11975.71 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 03 groups: 01 02 CPU1 attaching sched-domain: domain 0: span 03 groups: 02 01 net_namespace: 64 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 4 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:........................................................................................................................................................... Initialized 31/37 Regions 39/39 Fields 56/56 Buffers 36/38 Packages (1025 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux) ACPI: If "acpi_osi=Linux" works better, Please send dmidecode to linux-acpi@vger.kernel.org . Executed 1 _INI methods requiring 0 _STA executions (examined 94 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12 14 *15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 *14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12 14 *15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 97, should be 88 [20070126] ACPI Warning (tbutils-0217): Incorrect checksum in table [iEIT] - 89, should be C4 [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 23 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Time: tsc clocksource has been installed. system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:0a: ioport range 0xa20-0xa3f has been reserved system 00:0a: ioport range 0xa00-0xa0f has been reserved system 00:0a: ioport range 0xa10-0xa1f has been reserved system 00:0a: ioport range 0xa40-0xa5f has been reserved system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0e: iomem range 0xffc00000-0xffefffff could not be reserved system 00:0f: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:10: iomem range 0xe0000000-0xefffffff has been reserved system 00:11: iomem range 0xdfffc000-0xdfffcfff could not be reserved system 00:12: iomem range 0xfed90000-0xfed90fff could not be reserved system 00:13: iomem range 0x0-0x0 could not be reserved system 00:14: iomem range 0xfed92000-0xfed92fff could not be reserved system 00:15: iomem range 0xfed93000-0xfed93fff could not be reserved system 00:16: iomem range 0x0-0x9ffff could not be reserved system 00:16: iomem range 0xc0000-0xcffff could not be reserved system 00:16: iomem range 0xe0000-0xfffff could not be reserved system 00:16: iomem range 0x100000-0x7dffffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-afff MEM window: cfe00000-dfefffff PREFETCH window: bfd00000-cfcfffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:01:00.0 ACPI: SSDT 7DFB01B0, 0359 (r1 DpgPmm P001Ist 11 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 003E) - 7 Objects with 0 Devices 5 Methods 0 Regions ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: SSDT 7DFB0720, 0359 (r1 DpgPmm P002Ist 12 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 0042) - 7 Objects with 0 Devices 5 Methods 0 Regions ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI Exception (processor_core-0813): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0813): AE_NOT_FOUND, Processor Device is not present [20070126] isapnp: Scanning for PnP cards... Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 toshiba: not a supported Toshiba laptop ipmi message handler version 39.1 ipmi device interface IPMI Watchdog: driver initialized Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS2 at I/O 0xe080 (irq = 17) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize loop: module loaded console [netcon0] enabled Linux version 2.6.24-rc3-g2ffbb837 (lenb@s5000vsa) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #8 SMP Wed Nov 21 13:20:28 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007dfa0000 (usable) BIOS-e820: 000000007dfa0000 - 000000007dfae000 (ACPI data) BIOS-e820: 000000007dfae000 - 000000007dff0000 (ACPI NVS) BIOS-e820: 000000007dff0000 - 000000007e000000 (reserved) BIOS-e820: 00000000dfffc000 - 00000000dfffd000 (reserved) BIOS-e820: 00000000fed90000 - 00000000fed91000 (reserved) BIOS-e820: 00000000fed92000 - 00000000fed94000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1119MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 516000) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 516000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 516000 On node 0 totalpages: 516000 DMA zone: 40 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4056 pages, LIFO batch:0 Normal zone: 2200 pages used for memmap Normal zone: 223080 pages, LIFO batch:31 HighMem zone: 2799 pages used for memmap HighMem zone: 283825 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F93C0, 0014 (r0 ACPIAM) ACPI: RSDT 7DFA0000, 0048 (r1 080107 RSDT1024 20070801 MSFT 97) ACPI: FACP 7DFA0200, 0084 (r2 080107 FACP1024 20070801 MSFT 97) ACPI: DSDT 7DFA0490, 687F (r1 VVBLI9 VVBLI958 58 INTL 20051117) ACPI: FACS 7DFAE000, 0040 ACPI: APIC 7DFA0390, 006C (r1 080107 APIC1024 20070801 MSFT 97) ACPI: MCFG 7DFA0450, 003C (r1 080107 OEMMCFG 20070801 MSFT 97) ACPI: OEMB 7DFAE040, 008A (r1 080107 OEMB1024 20070801 MSFT 97) ACPI: ASF! 7DFA6D10, 0099 (r32 LEGEND I865PASF 1 INTL 20051117) ACPI: GSCI 7DFAE0D0, 2024 (r1 080107 GMCHSCI 20070801 MSFT 97) ACPI: iEIT 7DFB0100, 00B0 (r1 080107 EITTABLE 20070801 MSFT 97) ACPI: DMAR 7DFA6DB0, 0130 (r1 080107 OEMDMAR 1 MSFT 97) ACPI: SSDT 7DFB0C90, 0877 (r1 DpgPmm CpuPm 12 INTL 20051117) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7e000000:61ffc000) swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510961 Kernel command line: root=/dev/sda3 console=tty0 console=ttyS0,115200n8 debug mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c05a5000 soft=c059d000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2992.820 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2036592k/2064000k available (3092k kernel code, 26252k reserved, 1349k data, 248k init, 1146496k highmem) virtual kernel memory layout: fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc055c000 - 0xc059a000 ( 248 kB) .data : 0xc0405002 - 0xc055645c (1349 kB) .text : 0xc0100000 - 0xc0405002 (3092 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5990.44 BogoMIPS (lpj=11980894) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3fd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 967 Objects with 84 Devices 243 Methods 36 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 49 Objects with 0 Devices 8 Methods 1 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful CPU0: Intel Genuine Intel(R) CPU @ 3.00GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c05a6000 soft=c059e000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5985.26 BogoMIPS (lpj=11970529) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3fd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU @ 3.00GHz stepping 04 Total of 2 processors activated (11975.71 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 03 groups: 01 02 CPU1 attaching sched-domain: domain 0: span 03 groups: 02 01 net_namespace: 64 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 4 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:........................................................................................................................................................... Initialized 31/37 Regions 39/39 Fields 56/56 Buffers 36/38 Packages (1025 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux) ACPI: If "acpi_osi=Linux" works better, Please send dmidecode to linux-acpi@vger.kernel.org . Executed 1 _INI methods requiring 0 _STA executions (examined 94 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12 14 *15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 *14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12 14 *15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 97, should be 88 [20070126] ACPI Warning (tbutils-0217): Incorrect checksum in table [iEIT] - 89, should be C4 [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 23 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Time: tsc clocksource has been installed. system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:0a: ioport range 0xa20-0xa3f has been reserved system 00:0a: ioport range 0xa00-0xa0f has been reserved system 00:0a: ioport range 0xa10-0xa1f has been reserved system 00:0a: ioport range 0xa40-0xa5f has been reserved system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0e: iomem range 0xffc00000-0xffefffff could not be reserved system 00:0f: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:10: iomem range 0xe0000000-0xefffffff has been reserved system 00:11: iomem range 0xdfffc000-0xdfffcfff could not be reserved system 00:12: iomem range 0xfed90000-0xfed90fff could not be reserved system 00:13: iomem range 0x0-0x0 could not be reserved system 00:14: iomem range 0xfed92000-0xfed92fff could not be reserved system 00:15: iomem range 0xfed93000-0xfed93fff could not be reserved system 00:16: iomem range 0x0-0x9ffff could not be reserved system 00:16: iomem range 0xc0000-0xcffff could not be reserved system 00:16: iomem range 0xe0000-0xfffff could not be reserved system 00:16: iomem range 0x100000-0x7dffffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-afff MEM window: cfe00000-dfefffff PREFETCH window: bfd00000-cfcfffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:01:00.0 ACPI: SSDT 7DFB01B0, 0359 (r1 DpgPmm P001Ist 11 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 003E) - 7 Objects with 0 Devices 5 Methods 0 Regions ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: SSDT 7DFB0720, 0359 (r1 DpgPmm P002Ist 12 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 0042) - 7 Objects with 0 Devices 5 Methods 0 Regions ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI Exception (processor_core-0813): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0813): AE_NOT_FOUND, Processor Device is not present [20070126] isapnp: Scanning for PnP cards... Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 toshiba: not a supported Toshiba laptop ipmi message handler version 39.1 ipmi device interface IPMI Watchdog: driver initialized Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS2 at I/O 0xe080 (irq = 17) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize loop: module loaded console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc480 irq 18 ata2: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc488 irq 18 ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (not used) ata1.00: configured for UDMA/133 ata2.00: ATAPI: PLEXTOR DVDR PX-755A, 1.04, max UDMA/66 ata2.00: configured for UDMA/66 scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.04 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.5 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 18 ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 18 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000d880 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.2: irq 20, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000d480 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.2[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 2-1.1: new low speed USB device using uhci_hcd and address 3 usb 2-1.1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter usbcore: registered new interface driver belkin drivers/usb/serial/belkin_sa.c: USB Belkin Serial converter driver v1.2 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 i2c /dev entries driver input: USB Keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1a.1-1.1 input: USB Keyboard as /class/input/input2 input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1a.1-1.1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 23 06:09:18 2007 UTC). ALSA device list: #0: Dummy 1 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Starting balanced_irq Using IPI No-Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 248k freed Mount failed for selinuxfs on /selinux: No such device INIT: version 2.86 booting Welcome to Fedora Press 'I' to enter interactive startup. Setting clock (utc): Wed Nov 21 14:08:06 EST 2007 [ OK ] Starting udev: /sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory /sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory [ OK ] Loading default keymap (us): [ OK ] Setting hostname weybridge: [ OK ] DM multipath kernel driver not loaded No devices found Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda3 /: clean, 1239296/39124992 files, 30059958/39094177 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /boot: clean, 67/66264 files, 122162/265040 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 5 Entering non-interactive startup Applying Intel CPU microcode update: FATAL: Module microcode not found. ERROR: Module microcode does not exist in /proc/modules Checking for hardware changes [ OK ] Enabling ondemand cpu frequency scaling: [ OK ] FATAL: Module ipv6 not found. Bringing up loopback interface: [ OK ] Bringing up interface eth0: e1000e device eth0 does not seem to be present, delaying initialization. [FAILED] FATAL: Module ipv6 not found. Starting auditd: [FAILED] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Mounting NFS filesystems: mount: mount to NFS server '192.168.0.137' failed: System Error: Network is unreachable. [FAILED] Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting background readahead (early, fast mode): [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting system message bus: [ OK ] Starting autofs: Loading autofs4: [FAILED] [FAILED] Can't open RFCOMM control socket: Address family not supported by protocol Starting sshd: [ OK ] ntpd: Synchronizing with time server: [FAILED] Starting ntpd: [ OK ] Starting exim: [ OK ] Starting ConsoleKit: [ OK ] [ OK ] crond: [ OK ] Enabling monthly Smolt checkin: [ OK ] Starting atd: [ OK ] Starting Avahi daemon... [ OK ] Starting background readahead (later, fast mode): [ OK ] Starting yum-updatesd: [ OK ] Starting cups: [ OK ] Starting HAL daemon: [ OK ] Starting anacron: [ OK ] /sbin/sut.boot-record: output to /var/tmp/sut/2.6.24-rc3-g2ffbb837 /sbin/sut.boot-record: line 36: acpidump: command not found Fedora release 8 (Werewolf) Kernel 2.6.24-rc3-g2ffbb837 on an i686 weybridge login: CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.2 | VT102 | Online 00:00