Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000b7e0000 (usable) BIOS-e820: 000000000b7e0000 - 000000000b7f0000 (reserved) BIOS-e820: 000000000b7f0000 - 000000000b7f8000 (ACPI data) BIOS-e820: 000000000b7f8000 - 000000000b800000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 183MB LOWMEM available. zapping low mappings. On node 0 totalpages: 47072 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 42976 pages, LIFO batch:10 HighMem zone: 0 pages, LIFO batch:1 DMI not present. ACPI: RSDP (v000 IBM ) @ 0x000eab80 ACPI: RSDT (v001 IBM AXXXXXX4 0x00000004 IBM 0x00000000) @ 0x0b7f0000 ACPI: FADT (v001 IBM AXXXXXX4 0x00000004 IBM 0x00000000) @ 0x0b7f008c ACPI: BOOT (v001 IBM AXXXXXX4 0x00000004 IBM 0x00000000) @ 0x0b7f0030 ACPI: DBGP (v001 IBM AXXXXXX4 0x00000004 IBM 0x00000000) @ 0x0b7f0058 ACPI: DSDT (v001 IBM AXXXXXX4 0x00000004 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0xf108 Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023d5000 soft=023d4000 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 697.820 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 181832k/188288k available (2068k kernel code, 5880k reserved, 647k data, 144k init, 0k highmem) Calibrating delay loop... 1372.16 BogoMIPS (lpj=686080) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Celeron (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Edge set to Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 944k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [PILA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [PILD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [PILF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [PILG] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILH] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILI] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 34) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [PILH] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:10.0[A]: no GSI - using IRQ 15 ACPI: PCI Interrupt Link [PILD] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [PILI] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:14.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [PILA] enabled at IRQ 10 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10 Simple Boot Flag at 0x6e set to 0x1 apm: BIOS version 1.2 Flags 0x0f (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1194564068.603:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 6ECDA687281A73E5 - User ID: Red Hat, Inc. (Kernel Module GPG key) Activating ISA DMA hang workarounds. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 ACPI: Processor [CPU0] (supports C1 C2 C3) ACPI: Thermal Zone [THR2] (22 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected ALi M1632 chipset agpgart: Maximum main memory to use for agp memory: 142M agpgart: AGP aperture is 64M @ 0xe0000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:10.0 ACPI: PCI interrupt 0000:00:10.0[A]: no GSI - using IRQ 15 ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x7050-0x7057, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x7058-0x705f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IBM-DJSA-210, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: CD-224E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 19640880 sectors (10056 MB) w/384KiB Cache, CHS=19485/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 256 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 4681) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: OZ68 OBLN OBAU USB0 LID Freeing unused kernel memory: 144k freed device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-1.667 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:14.0[A] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:14.0: OHCI Host Controller ohci_hcd 0000:00:14.0: irq 10, pci mem 0e034000 ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 10 (level, low) -> IRQ 10 Yenta: CardBus bridge found at 0000:00:13.0 [1014:01a3] Yenta: ISA IRQ mask 0x0098, PCI irq 10 Socket status: 30000007 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET: Registered protocol family 10 Disabled Privacy Extensions on device 02369a00(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] EXT3 FS on dm-0, internal journal cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 393208k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 parport0: PC-style at 0x3bc [PCSPP] ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (1471 buckets, 11768 max) - 356 bytes per conntrack cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x2c8-0x2cf 0x330-0x337 0x388-0x38f 0x3b8-0x3df 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. i2c /dev entries driver parport0: PC-style at 0x3bc [PCSPP] lp0: using parport0 (polling). lp0: console ready