[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.2-200.fc20.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #1 SMP Mon Apr 28 14:40:57 UTC 2014 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.14.2-200.fc20.x86_64 root=/dev/mapper/vg_lucifer-root ro rd.lvm.lv=vg_lucifer/swap rd.dm=0 rd.luks=0 rd.md.uuid=e10bb37b:c4d7dd2e:a7e5d7a5:bf92e861 LANG=en_US.UTF-8 rd.lvm.lv=vg_lucifer/root rd.md.uuid=ab201cc0:2553b487:1596c82a:81dfa07f quiet systemd.show_status=1 plymouth.enable=0 crashkernel=128M drm.debug=0xe [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000ca9f7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca9f8000-0x00000000caa3bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000caa3c000-0x00000000cadb6fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cadb7000-0x00000000cade6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. OptiPlex 990/06D7TR, BIOS A17 03/14/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x42e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-97FFF write-back [ 0.000000] 98000-9BFFF write-protect [ 0.000000] 9C000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FE0000000 write-back [ 0.000000] 2 base 420000000 mask FF0000000 write-back [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable [ 0.000000] 6 base 0CB000000 mask FFF000000 uncachable [ 0.000000] 7 base 42E000000 mask FFE000000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f2230-0x000f223f] mapped at [ffff8800000f2230] [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0201b000, 0x0201bfff] PGTABLE [ 0.000000] BRK [0x0201c000, 0x0201cfff] PGTABLE [ 0.000000] BRK [0x0201d000, 0x0201dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x42de00000-0x42dffffff] [ 0.000000] [mem 0x42de00000-0x42dffffff] page 2M [ 0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42ddfffff] [ 0.000000] [mem 0x42c000000-0x42ddfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff] [ 0.000000] [mem 0x400000000-0x42bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xca9f7fff] [ 0.000000] [mem 0x40200000-0xca7fffff] page 2M [ 0.000000] [mem 0xca800000-0xca9f7fff] page 4k [ 0.000000] BRK [0x0201f000, 0x0201ffff] PGTABLE [ 0.000000] BRK [0x02020000, 0x02020fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xcaa3c000-0xcadb6fff] [ 0.000000] [mem 0xcaa3c000-0xcadb6fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff] [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x3681e000-0x37406fff] [ 0.000000] ACPI: RSDP 00000000000fe300 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000caffde18 000074 (v01 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000caf87d98 0000F4 (v04 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xCAFE4E40/0x00000000CAFE4D40, using 64-bit address (20131218/tbfadt-271) [ 0.000000] ACPI: DSDT 00000000caf71018 007581 (v02 INT430 SYSFexxx 00001001 INTL 20090903) [ 0.000000] ACPI: FACS 00000000cafe4d40 000040 [ 0.000000] ACPI: APIC 00000000caffcf18 0000CC (v02 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: TCPA 00000000cafe5d18 000032 (v02 00000000 00000000) [ 0.000000] ACPI: SSDT 00000000caf88a98 0002F9 (v01 DELLTP TPM 00003000 INTL 20090903) [ 0.000000] ACPI: MCFG 00000000cafe5c98 00003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cafe5c18 000038 (v01 A M I PCHHPET 06222004 AMI. 00000003) [ 0.000000] ACPI: BOOT 00000000cafe5b98 000028 (v01 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: SSDT 00000000caf7e018 000846 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000caf7d018 000996 (v01 PmRef CpuPm 00003000 INTL 20090903) [ 0.000000] ACPI: DMAR 00000000caf87c18 0000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042dffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x42dffffff] [ 0.000000] NODE_DATA [mem 0x42dfdb000-0x42dfeefff] [ 0.000000] Reserving 128MB of memory at 736MB for crashkernel (System RAM: 16265MB) [ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041d600000-ffff88042d5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x42dffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xca9f7fff] [ 0.000000] node 0: [mem 0xcaa3c000-0xcadb6fff] [ 0.000000] node 0: [mem 0xcafff000-0xcaffffff] [ 0.000000] node 0: [mem 0x100000000-0x42dffffff] [ 0.000000] On node 0 totalpages: 4163853 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 153 pages reserved [ 0.000000] DMA zone: 3993 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12902 pages used for memmap [ 0.000000] DMA32 zone: 825716 pages, LIFO batch:31 [ 0.000000] Normal zone: 52096 pages used for memmap [ 0.000000] Normal zone: 3334144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xca9f8000-0xcaa3bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcadb7000-0xcade6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcade7000-0xcafe6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcafe7000-0xcaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffc1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc20000-0xffffffff] [ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88042dc00000 s86848 r8192 d23744 u131072 [ 0.000000] pcpu-alloc: s86848 r8192 d23744 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4098638 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.14.2-200.fc20.x86_64 root=/dev/mapper/vg_lucifer-root ro rd.lvm.lv=vg_lucifer/swap rd.dm=0 rd.luks=0 rd.md.uuid=e10bb37b:c4d7dd2e:a7e5d7a5:bf92e861 LANG=en_US.UTF-8 rd.lvm.lv=vg_lucifer/root rd.md.uuid=ab201cc0:2553b487:1596c82a:81dfa07f quiet systemd.show_status=1 plymouth.enable=0 crashkernel=128M drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Memory: 16164560K/16655412K available (7181K kernel code, 1079K rwdata, 3040K rodata, 1444K init, 1644K bss, 490852K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=16. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS:65792 nr_irqs:808 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3392.111 MHz processor [ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.22 BogoMIPS (lpj=3392111) [ 0.000035] pid_max: default: 32768 minimum: 301 [ 0.000042] ACPI: Core revision 20131218 [ 0.002946] ACPI: All ACPI Tables successfully acquired [ 0.003130] Security Framework initialized [ 0.003136] SELinux: Initializing. [ 0.003140] SELinux: Starting in permissive mode [ 0.004097] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.006585] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.007629] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.007646] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.007838] Initializing cgroup subsys memory [ 0.007842] Initializing cgroup subsys devices [ 0.007843] Initializing cgroup subsys freezer [ 0.007844] Initializing cgroup subsys net_cls [ 0.007845] Initializing cgroup subsys blkio [ 0.007846] Initializing cgroup subsys perf_event [ 0.007848] Initializing cgroup subsys hugetlb [ 0.007867] CPU: Physical Processor ID: 0 [ 0.007867] CPU: Processor Core ID: 0 [ 0.007871] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.007874] mce: CPU supports 9 MCE banks [ 0.007884] CPU0: Thermal monitoring enabled (TM1) [ 0.007892] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 tlb_flushall_shift: 6 [ 0.007961] Freeing SMP alternatives memory: 24K (ffffffff81e78000 - ffffffff81e7e000) [ 0.009043] ftrace: allocating 26308 entries in 103 pages [ 0.018459] dmar: Host address width 36 [ 0.018460] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.018464] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.018465] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.018468] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.018469] dmar: RMRR base: 0x000000cadc6000 end: 0x000000cadd5fff [ 0.018470] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff [ 0.018539] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.018540] HPET id 0 under DRHD base 0xfed91000 [ 0.018540] HPET id 0 under DRHD base 0xfed91000 [ 0.018541] HPET id 0 under DRHD base 0xfed91000 [ 0.018542] HPET id 0 under DRHD base 0xfed91000 [ 0.018542] HPET id 0 under DRHD base 0xfed91000 [ 0.018543] HPET id 0 under DRHD base 0xfed91000 [ 0.018544] HPET id 0 under DRHD base 0xfed91000 [ 0.018544] HPET id 0 under DRHD base 0xfed91000 [ 0.018545] Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.018705] Enabled IRQ remapping in x2apic mode [ 0.018707] Enabling x2apic [ 0.018707] Enabled x2apic [ 0.018712] Switched APIC routing to cluster x2apic. [ 0.019133] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.029142] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07) [ 0.029148] TSC deadline timer enabled [ 0.029157] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.029163] ... version: 3 [ 0.029163] ... bit width: 48 [ 0.029164] ... generic registers: 4 [ 0.029165] ... value mask: 0000ffffffffffff [ 0.029165] ... max period: 0000ffffffffffff [ 0.029166] ... fixed-purpose events: 3 [ 0.029167] ... event mask: 000000070000000f [ 0.030096] x86: Booting SMP configuration: [ 0.030097] .... node #0, CPUs: #1 [ 0.043335] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.043403] #2 #3 #4 #5 #6 #7 [ 0.122585] x86: Booted up 1 node, 8 CPUs [ 0.122588] smpboot: Total of 8 processors activated (54273.77 BogoMIPS) [ 0.128987] devtmpfs: initialized [ 0.132399] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes) [ 0.132423] reboot: Dell OptiPlex 990 series board detected. Selecting PCI-method for reboots. [ 0.133054] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.133056] pinctrl core: initialized pinctrl subsystem [ 0.133089] RTC time: 15:40:22, date: 05/02/14 [ 0.133117] NET: Registered protocol family 16 [ 0.133204] cpuidle: using governor menu [ 0.133258] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.133259] ACPI: bus type PCI registered [ 0.133261] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.133318] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.133320] PCI: not using MMCONFIG [ 0.133321] PCI: Using configuration type 1 for base access [ 0.133326] dmi type 0xB1 record - unknown flag [ 0.133637] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.133637] mtrr: probably your BIOS does not setup all CPUs. [ 0.133638] mtrr: corrected configuration. [ 0.134412] bio: create slab at 0 [ 0.134497] ACPI: Added _OSI(Module Device) [ 0.134498] ACPI: Added _OSI(Processor Device) [ 0.134499] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.134500] ACPI: Added _OSI(Processor Aggregator Device) [ 0.137451] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.150103] ACPI: SSDT 00000000cadd7798 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) [ 0.150291] ACPI: Dynamic OEM Table Load: [ 0.150293] ACPI: SSDT (null) 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) [ 0.155039] ACPI: SSDT 00000000cadd8a98 000303 (v01 PmRef ApIst 00003000 INTL 20090903) [ 0.155243] ACPI: Dynamic OEM Table Load: [ 0.155244] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20090903) [ 0.159964] ACPI: SSDT 00000000cadd6d98 000119 (v01 PmRef ApCst 00003000 INTL 20090903) [ 0.160146] ACPI: Dynamic OEM Table Load: [ 0.160147] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20090903) [ 0.165594] ACPI: Interpreter enabled [ 0.165598] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.165601] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.165609] ACPI: (supports S0 S3 S4 S5) [ 0.165610] ACPI: Using IOAPIC for interrupt routing [ 0.165621] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.165837] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.170231] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.170315] ACPI: No dock devices found. [ 0.183710] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.183714] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.183736] \_SB_.PCI0:_OSC invalid UUID [ 0.183736] _OSC request data:1 1f 0 [ 0.183739] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.184202] PCI host bridge to bus 0000:00 [ 0.184204] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.184206] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.184207] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.184208] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.184209] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff] [ 0.184215] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.184275] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000 [ 0.184283] pci 0000:00:02.0: reg 0x10: [mem 0xe0c00000-0xe0ffffff 64bit] [ 0.184287] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.184291] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.184366] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.184387] pci 0000:00:16.0: reg 0x10: [mem 0xe1ab0000-0xe1ab000f 64bit] [ 0.184457] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.184519] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.184535] pci 0000:00:19.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff] [ 0.184542] pci 0000:00:19.0: reg 0x14: [mem 0xe1a80000-0xe1a80fff] [ 0.184550] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.184606] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.193980] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.194043] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.194062] pci 0000:00:1a.0: reg 0x10: [mem 0xe1a70000-0xe1a703ff] [ 0.194144] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.194185] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.194217] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.194231] pci 0000:00:1b.0: reg 0x10: [mem 0xe1a60000-0xe1a63fff 64bit] [ 0.194298] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.194327] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.194356] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.194429] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.194460] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.194489] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.194562] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.194593] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.194629] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.194648] pci 0000:00:1d.0: reg 0x10: [mem 0xe1a50000-0xe1a503ff] [ 0.194730] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.194767] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.194793] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.194858] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.194888] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100 [ 0.195037] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.195053] pci 0000:00:1f.2: reg 0x10: [io 0x30d0-0x30d7] [ 0.195060] pci 0000:00:1f.2: reg 0x14: [io 0x30c0-0x30c3] [ 0.195067] pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7] [ 0.195073] pci 0000:00:1f.2: reg 0x1c: [io 0x30a0-0x30a3] [ 0.195080] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.195087] pci 0000:00:1f.2: reg 0x24: [mem 0xe1a40000-0xe1a407ff] [ 0.195126] pci 0000:00:1f.2: PME# supported from D3hot [ 0.195177] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.195190] pci 0000:00:1f.3: reg 0x10: [mem 0xe1a30000-0xe1a300ff 64bit] [ 0.195209] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f] [ 0.195319] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.195427] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.195472] pci 0000:02:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit] [ 0.195736] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.195791] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.196988] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.196994] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.197000] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff] [ 0.197007] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref] [ 0.197087] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.197095] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.197096] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.197098] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.197099] pci 0000:00:1e.0: bridge window [mem 0xcfa00000-0xfeafffff] (subtractive decode) [ 0.197283] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.197318] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.197352] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.197387] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.197419] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.197452] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.197484] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 0.197516] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.197552] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.197605] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.197607] vgaarb: loaded [ 0.197608] vgaarb: bridge control possible 0000:00:02.0 [ 0.197649] SCSI subsystem initialized [ 0.197677] libata version 3.00 loaded. [ 0.197695] ACPI: bus type USB registered [ 0.197706] usbcore: registered new interface driver usbfs [ 0.197712] usbcore: registered new interface driver hub [ 0.197725] usbcore: registered new device driver usb [ 0.197772] PCI: Using ACPI for IRQ routing [ 0.199169] PCI: pci_cache_line_size set to 64 bytes [ 0.199205] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 0.199206] e820: reserve RAM buffer [mem 0xca9f8000-0xcbffffff] [ 0.199208] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff] [ 0.199209] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff] [ 0.199210] e820: reserve RAM buffer [mem 0x42e000000-0x42fffffff] [ 0.199274] NetLabel: Initializing [ 0.199275] NetLabel: domain hash size = 128 [ 0.199276] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.199285] NetLabel: unlabeled traffic allowed by default [ 0.199333] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.199337] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.201359] Switched to clocksource hpet [ 0.205479] pnp: PnP ACPI init [ 0.205492] ACPI: bus type PNP registered [ 0.205522] pnp 00:00: [dma 4] [ 0.205538] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.205554] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.205619] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.205646] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.205683] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.205684] system 00:04: [io 0xffff] has been reserved [ 0.205685] system 00:04: [io 0xffff] has been reserved [ 0.205687] system 00:04: [io 0xffff] has been reserved [ 0.205688] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.205689] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.205691] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.205692] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.205694] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.205715] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.205746] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.205747] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.205807] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.205958] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.206088] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.206090] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.206091] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.206092] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.206094] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.206095] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.206097] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.206098] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.206099] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.206101] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.206102] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.206132] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved [ 0.206134] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved [ 0.206135] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.206200] pnp: PnP ACPI: found 11 devices [ 0.206201] ACPI: bus type PNP unregistered [ 0.212255] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.212266] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.212269] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.212274] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff] [ 0.212278] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref] [ 0.212283] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.212292] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.212294] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.212295] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.212296] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff] [ 0.212297] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.212299] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe19fffff] [ 0.212300] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref] [ 0.212301] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.212302] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.212303] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.212305] pci_bus 0000:03: resource 7 [mem 0xcfa00000-0xfeafffff] [ 0.212328] NET: Registered protocol family 2 [ 0.212490] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.212681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.212804] TCP: Hash tables configured (established 131072 bind 65536) [ 0.212818] TCP: reno registered [ 0.212835] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.212883] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.212957] NET: Registered protocol family 1 [ 0.213285] pci 0000:00:02.0: Boot video device [ 0.213680] PCI: CLS 64 bytes, default 64 [ 0.213712] Unpacking initramfs... [ 0.346153] Freeing initrd memory: 12196K (ffff88003681e000 - ffff880037407000) [ 0.346180] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.346182] software IO TLB [mem 0xc69f8000-0xca9f8000] (64MB) mapped at [ffff8800c69f8000-ffff8800ca9f7fff] [ 0.346242] Simple Boot Flag at 0xf3 set to 0x1 [ 0.346488] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.346948] AVX version of gcm_enc/dec engaged. [ 0.348306] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.348707] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.348742] Initialise system trusted keyring [ 0.348776] audit: initializing netlink subsys (disabled) [ 0.348788] audit: type=2000 audit(1399045222.329:1): initialized [ 0.365125] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.366071] zbud: loaded [ 0.366173] VFS: Disk quotas dquot_6.5.2 [ 0.366208] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.366494] msgmni has been set to 31595 [ 0.366536] Key type big_key registered [ 0.366537] SELinux: Registering netfilter hooks [ 0.367336] alg: No test for stdrng (krng) [ 0.367342] NET: Registered protocol family 38 [ 0.367344] Key type asymmetric registered [ 0.367345] Asymmetric key parser 'x509' registered [ 0.367368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.367400] io scheduler noop registered [ 0.367401] io scheduler deadline registered [ 0.367422] io scheduler cfq registered (default) [ 0.367665] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.367675] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.367698] vesafb: mode is 2560x1600x32, linelength=10240, pages=0 [ 0.367699] vesafb: scrolling: redraw [ 0.367700] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.368925] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 16000k, total 16000k [ 0.368987] Console: switching to colour frame buffer device 320x100 [ 0.587278] fb0: VESA VGA frame buffer device [ 0.587304] intel_idle: MWAIT substates: 0x1120 [ 0.587306] intel_idle: v0.4 model 0x2A [ 0.587307] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.587531] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.587534] ACPI: Power Button [PWRB] [ 0.587587] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.587588] ACPI: Power Button [PWRF] [ 0.587855] GHES: HEST is not enabled! [ 0.587895] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.608495] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.608998] Non-volatile memory driver v1.3 [ 0.609000] Linux agpgart interface v0.103 [ 0.609082] ahci 0000:00:1f.2: version 3.0 [ 0.609174] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 0.619577] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode [ 0.619580] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.623994] scsi0 : ahci [ 0.624257] scsi1 : ahci [ 0.624512] scsi2 : ahci [ 0.624718] scsi3 : ahci [ 0.624857] scsi4 : ahci [ 0.624960] scsi5 : ahci [ 0.624989] ata1: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40100 irq 42 [ 0.624991] ata2: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40180 irq 42 [ 0.624993] ata3: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40200 irq 42 [ 0.624994] ata4: DUMMY [ 0.624995] ata5: DUMMY [ 0.624995] ata6: DUMMY [ 0.625040] libphy: Fixed MDIO Bus: probed [ 0.625115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.625120] ehci-pci: EHCI PCI platform driver [ 0.625225] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.625258] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.625270] ehci-pci 0000:00:1a.0: debug port 2 [ 0.629182] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.629194] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1a70000 [ 0.634576] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.634617] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.634619] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.634620] usb usb1: Product: EHCI Host Controller [ 0.634621] usb usb1: Manufacturer: Linux 3.14.2-200.fc20.x86_64 ehci_hcd [ 0.634622] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.634714] hub 1-0:1.0: USB hub found [ 0.634720] hub 1-0:1.0: 2 ports detected [ 0.634861] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.634892] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.634902] ehci-pci 0000:00:1d.0: debug port 2 [ 0.638799] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.638810] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1a50000 [ 0.644581] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.644610] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.644611] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.644613] usb usb2: Product: EHCI Host Controller [ 0.644614] usb usb2: Manufacturer: Linux 3.14.2-200.fc20.x86_64 ehci_hcd [ 0.644615] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.644691] hub 2-0:1.0: USB hub found [ 0.644695] hub 2-0:1.0: 2 ports detected [ 0.644762] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.644765] ohci-pci: OHCI PCI platform driver [ 0.644771] uhci_hcd: USB Universal Host Controller Interface driver [ 0.644840] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.644869] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 0.645142] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X [ 0.645149] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X [ 0.645154] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.645158] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X [ 0.645163] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X [ 0.645168] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X [ 0.645172] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X [ 0.645177] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X [ 0.645364] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.645365] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.645366] usb usb3: Product: xHCI Host Controller [ 0.645368] usb usb3: Manufacturer: Linux 3.14.2-200.fc20.x86_64 xhci_hcd [ 0.645369] usb usb3: SerialNumber: 0000:02:00.0 [ 0.645432] hub 3-0:1.0: USB hub found [ 0.645443] hub 3-0:1.0: 2 ports detected [ 0.645510] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.645534] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 [ 0.648422] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.648423] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.648424] usb usb4: Product: xHCI Host Controller [ 0.648425] usb usb4: Manufacturer: Linux 3.14.2-200.fc20.x86_64 xhci_hcd [ 0.648426] usb usb4: SerialNumber: 0000:02:00.0 [ 0.648489] hub 4-0:1.0: USB hub found [ 0.648502] hub 4-0:1.0: 2 ports detected [ 0.648614] usbcore: registered new interface driver usbserial [ 0.648620] usbcore: registered new interface driver usbserial_generic [ 0.648624] usbserial: USB Serial support registered for generic [ 0.648642] i8042: PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12 [ 0.648643] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.651501] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.651505] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.651573] mousedev: PS/2 mouse device common for all mice [ 0.651725] rtc_cmos 00:05: RTC can wake from S4 [ 0.651847] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.651876] rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.651921] device-mapper: uevent: version 1.0.3 [ 0.651966] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.652031] Intel P-state driver initializing. [ 0.652041] Intel pstate controlling: cpu 0 [ 0.652053] Intel pstate controlling: cpu 1 [ 0.652061] Intel pstate controlling: cpu 2 [ 0.652071] Intel pstate controlling: cpu 3 [ 0.652080] Intel pstate controlling: cpu 4 [ 0.652093] Intel pstate controlling: cpu 5 [ 0.652103] Intel pstate controlling: cpu 6 [ 0.652111] Intel pstate controlling: cpu 7 [ 0.652377] hidraw: raw HID events driver (C) Jiri Kosina [ 0.652436] usbcore: registered new interface driver usbhid [ 0.652437] usbhid: USB HID core driver [ 0.652460] drop_monitor: Initializing network drop monitor service [ 0.652506] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.652595] TCP: cubic registered [ 0.652596] Initializing XFRM netlink socket [ 0.652673] NET: Registered protocol family 10 [ 0.652897] mip6: Mobile IPv6 [ 0.652900] NET: Registered protocol family 17 [ 0.653209] Loading compiled-in X.509 certificates [ 0.653871] Loaded X.509 cert 'Fedora kernel signing key: 701acb030b0c4f4fe51ed7e7b683133daf301281' [ 0.653878] registered taskstats version 1 [ 0.654272] Magic number: 14:864:688 [ 0.654374] rtc_cmos 00:05: setting system clock to 2014-05-02 15:40:23 UTC (1399045223) [ 0.654415] PM: Hibernation image not present or could not be loaded. [ 0.929756] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.929780] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.929803] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.930405] ata3.00: ATAPI: TSSTcorp DVD+/-RW SH-216AB, D300, max UDMA/100 [ 0.930410] ata3.00: applying bridge limits [ 0.930965] ata1.00: ATA-8: ST31000524AS, JC4A, max UDMA/133 [ 0.930970] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.930991] ata2.00: ATA-8: ST31000524AS, JC4A, max UDMA/133 [ 0.930996] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.931514] ata3.00: configured for UDMA/100 [ 0.932402] ata1.00: configured for UDMA/133 [ 0.932437] ata2.00: configured for UDMA/133 [ 0.932661] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC4A PQ: 0 ANSI: 5 [ 0.932989] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.933000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.933259] scsi 1:0:0:0: Direct-Access ATA ST31000524AS JC4A PQ: 0 ANSI: 5 [ 0.933260] sd 0:0:0:0: [sda] Write Protect is off [ 0.933262] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.933369] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.933420] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.933436] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.933466] sd 1:0:0:0: [sdb] Write Protect is off [ 0.933468] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.933483] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.934118] scsi 2:0:0:0: CD-ROM TSSTcorp DVD+-RW SH-216AB D300 PQ: 0 ANSI: 5 [ 0.936767] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.946060] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.946065] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.946297] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.946477] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 0.951814] sda: sda1 sda2 sda3 sda4 < sda5 > [ 0.953097] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.957367] sdb: sdb1 sdb2 [ 0.957762] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.959034] Freeing unused kernel memory: 1444K (ffffffff81d0f000 - ffffffff81e78000) [ 0.959037] Write protecting the kernel read-only data: 12288k [ 0.962786] Freeing unused kernel memory: 1000K (ffff880001706000 - ffff880001800000) [ 0.966284] Freeing unused kernel memory: 1056K (ffff880001af8000 - ffff880001c00000) [ 0.968455] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 0.968616] systemd[1]: Running in initial RAM disk. [ 0.969410] systemd[1]: Set hostname to . [ 0.969951] random: systemd urandom read with 22 bits of entropy available [ 1.007994] systemd[1]: Expecting device dev-mapper-vg_lucifer\x2droot.device... [ 1.009107] systemd[1]: Starting -.slice. [ 1.009999] systemd[1]: Created slice -.slice. [ 1.010020] systemd[1]: Starting System Slice. [ 1.010871] systemd[1]: Created slice System Slice. [ 1.010887] systemd[1]: Starting Slices. [ 1.011582] systemd[1]: Reached target Slices. [ 1.011595] systemd[1]: Starting Timers. [ 1.012300] systemd[1]: Reached target Timers. [ 1.012315] systemd[1]: Starting Journal Socket. [ 1.013162] systemd[1]: Listening on Journal Socket. [ 1.013312] systemd[1]: Starting dracut cmdline hook... [ 1.014418] systemd[1]: Starting Journal Service... [ 1.016237] systemd[1]: Started Journal Service. [ 1.052212] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.052214] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.052459] hub 1-1:1.0: USB hub found [ 1.052555] hub 1-1:1.0: 6 ports detected [ 1.155848] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.270301] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.270302] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.270561] hub 2-1:1.0: USB hub found [ 1.270647] hub 2-1:1.0: 8 ports detected [ 1.331736] systemd-udevd[265]: starting version 208 [ 1.348923] tsc: Refined TSC clocksource calibration: 3392.293 MHz [ 1.461268] [drm] Initialized drm 1.1.0 20060810 [ 1.487130] [drm:i915_dump_device_info], i915 device info: gen=6, pciid=0x0102 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc, [ 1.487395] [drm:intel_detect_pch], Found CougarPoint PCH [ 1.487695] [drm] Memory usable by graphics device = 2048M [ 1.487697] [drm:i915_gem_gtt_init], GMADR size = 256M [ 1.487699] [drm:i915_gem_gtt_init], GTT stolen size = 64M [ 1.487701] checking generic (d0000000 fa0000) vs hw (d0000000 10000000) [ 1.487702] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 1.487718] Console: switching to colour dummy device 80x25 [ 1.518940] [drm:intel_opregion_setup], graphic opregion physical addr: 0xcaf7a018 [ 1.518947] [drm:intel_opregion_setup], SWSCI supported [ 1.524006] [drm:swsci_setup], SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241 [ 1.524054] i915 0000:00:02.0: irq 51 for MSI/MSI-X [ 1.524061] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.524062] [drm] Driver supports precise vblank timestamp query. [ 1.524064] [drm:init_vbt_defaults], Set default to SSC at 120000 kHz [ 1.524066] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd [ 1.524068] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.524069] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 1.524072] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.524075] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.524077] [drm:parse_lfp_panel_data], VBT initial LVDS value 300 [ 1.524079] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.524081] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 1.524083] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.524084] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.524086] [drm:parse_mipi], No MIPI BDB found [ 1.524093] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 1.524098] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at cba00000 [ 1.524128] [drm:intel_print_wm_latency], Primary WM0 latency 7 (0.7 usec) [ 1.524129] [drm:intel_print_wm_latency], Primary WM1 latency 3 (1.5 usec) [ 1.524131] [drm:intel_print_wm_latency], Primary WM2 latency 4 (2.0 usec) [ 1.524132] [drm:intel_print_wm_latency], Primary WM3 latency 22 (11.0 usec) [ 1.524134] [drm:intel_print_wm_latency], Sprite WM0 latency 7 (0.7 usec) [ 1.524135] [drm:intel_print_wm_latency], Sprite WM1 latency 3 (1.5 usec) [ 1.524137] [drm:intel_print_wm_latency], Sprite WM2 latency 4 (2.0 usec) [ 1.524138] [drm:intel_print_wm_latency], Sprite WM3 latency 22 (11.0 usec) [ 1.524139] [drm:intel_print_wm_latency], Cursor WM0 latency 7 (0.7 usec) [ 1.524141] [drm:intel_print_wm_latency], Cursor WM1 latency 3 (1.5 usec) [ 1.524142] [drm:intel_print_wm_latency], Cursor WM2 latency 4 (2.0 usec) [ 1.524144] [drm:intel_print_wm_latency], Cursor WM3 latency 22 (11.0 usec) [ 1.524146] [drm:intel_modeset_init], 2 display pipes available. [ 1.524157] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.524462] [drm:intel_lvds_init], LVDS is not present in VBT [ 1.524530] [drm:intel_dp_init_connector], Adding DP connector on port C [ 1.524555] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 1.525522] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0 has_ck505 0 [ 1.525527] [drm:ironlake_init_pch_refclk], Disabling SSC entirely [ 1.525937] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000] [ 1.529777] [drm:init_status_page], render ring hws offset: 0x00000000 [ 1.530121] [drm:init_pipe_control], render ring pipe control offset: 0x00021000 [ 1.530130] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 1.530220] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 1.530313] [drm:create_default_context], Default HW context loaded [ 1.530315] [drm:i915_gem_context_init], HW context support initialized [ 1.530339] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 1.530340] [drm] This can cause pipe underruns and display issues. [ 1.530341] [drm] Please upgrade your BIOS to fix this. [ 1.530348] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 1.530360] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 1.530362] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled [ 1.530367] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1 [ 1.530371] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0 [ 1.530376] [drm:intel_modeset_readout_hw_state], [ENCODER:8:DAC-8] hw state readout: disabled, pipe A [ 1.530380] [drm:intel_modeset_readout_hw_state], [ENCODER:9:TMDS-9] hw state readout: disabled, pipe A [ 1.530389] [drm:intel_modeset_readout_hw_state], [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A [ 1.530393] [drm:intel_modeset_readout_hw_state], [CONNECTOR:7:VGA-1] hw state readout: disabled [ 1.530397] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:HDMI-A-1] hw state readout: disabled [ 1.530401] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:DP-1] hw state readout: enabled [ 1.530404] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 1.530406] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.530408] [drm:intel_dump_pipe_config], pipe bpp: 30, dithering: 0 [ 1.530411] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 4, gmch_m: 7820629, gmch_n: 8388608, link_m: 521375, link_n: 524288, tu: 64 [ 1.530414] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 7840173, gmch_n: 8388608, link_m: 522678, link_n: 524288, tu: 64 [ 1.530416] [drm:intel_dump_pipe_config], requested mode: [ 1.530419] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 2560 0 0 0 1600 0 0 0 0x0 0x0 [ 1.530421] [drm:intel_dump_pipe_config], adjusted mode: [ 1.530424] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 1.530427] [drm:intel_dump_crtc_timings], crtc timings: 269170 2560 2608 2640 2720 1600 1603 1609 1646, type: 0x0 flags: 0x5 [ 1.530429] [drm:intel_dump_pipe_config], port clock: 270000 [ 1.530431] [drm:intel_dump_pipe_config], pipe src size: 2560x1600 [ 1.530433] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.530436] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x0a000640, enabled [ 1.530437] [drm:intel_dump_pipe_config], ips: 0 [ 1.530439] [drm:intel_dump_pipe_config], double wide: 0 [ 1.530442] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 1.530443] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.530445] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.530448] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.530450] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.530452] [drm:intel_dump_pipe_config], requested mode: [ 1.530455] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.530457] [drm:intel_dump_pipe_config], adjusted mode: [ 1.530460] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.530463] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.530464] [drm:intel_dump_pipe_config], port clock: 0 [ 1.530466] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.530468] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.530470] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.530472] [drm:intel_dump_pipe_config], ips: 0 [ 1.530474] [drm:intel_dump_pipe_config], double wide: 0 [ 1.530482] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1] [ 1.530486] [drm:check_encoder_state], [ENCODER:8:DAC-8] [ 1.530489] [drm:check_encoder_state], [ENCODER:9:TMDS-9] [ 1.530493] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 1.530497] [drm:check_crtc_state], [CRTC:3] [ 1.530513] [drm:check_crtc_state], [CRTC:5] [ 1.530515] [drm:check_shared_dpll_state], PCH DPLL A [ 1.530520] [drm:check_shared_dpll_state], PCH DPLL B [ 1.530533] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 1.530535] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 1.530539] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 1.540010] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 1.540014] [drm:intel_crt_detect], CRT not detected via hotplug [ 1.540224] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 1.540229] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.540231] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.540234] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.540587] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.540589] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.540591] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 1.540594] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected [ 1.540598] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 1.540600] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 1.540758] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.540760] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.540763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 1.540765] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 1.540768] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 1.541091] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00 [ 1.541891] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.546058] usb 2-1.3: new high-speed USB device number 3 using ehci-pci [ 1.563844] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.585868] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.585873] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 1.586664] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.608428] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.629786] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.629853] [drm:drm_edid_to_eld], ELD monitor DELL U3011 [ 1.629855] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 1.629889] [drm:drm_mode_debug_printmodeline], Modeline 40:"1440x480i" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 1.629891] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 1.629895] [drm:drm_mode_debug_printmodeline], Modeline 41:"1440x576i" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a [ 1.629896] [drm:drm_mode_prune_invalid], Not using 1440x576i mode 3 [ 1.629900] [drm:drm_mode_debug_printmodeline], Modeline 61:"1440x480i" 60 27027 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 1.629902] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 1.629908] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes : [ 1.629911] [drm:drm_mode_debug_printmodeline], Modeline 16:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9 [ 1.629915] [drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1440" 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 [ 1.629918] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 [ 1.629921] [drm:drm_mode_debug_printmodeline], Modeline 17:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.629925] [drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.629928] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.629932] [drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.629935] [drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.629938] [drm:drm_mode_debug_printmodeline], Modeline 48:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.629942] [drm:drm_mode_debug_printmodeline], Modeline 50:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.629945] [drm:drm_mode_debug_printmodeline], Modeline 64:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.629948] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.629952] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.629955] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.629958] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 1.629961] [drm:drm_mode_debug_printmodeline], Modeline 21:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.629965] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.629968] [drm:drm_mode_debug_printmodeline], Modeline 53:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.629971] [drm:drm_mode_debug_printmodeline], Modeline 47:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.629974] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.629978] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.629981] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.629984] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.629987] [drm:drm_mode_debug_printmodeline], Modeline 44:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.629991] [drm:drm_mode_debug_printmodeline], Modeline 54:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.629994] [drm:drm_mode_debug_printmodeline], Modeline 20:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.629997] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.630000] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.630003] [drm:drm_mode_debug_printmodeline], Modeline 42:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.630007] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.630009] [drm:drm_setup_crtcs], [ 1.630011] [drm:drm_enable_connectors], connector 7 enabled? no [ 1.630013] [drm:drm_enable_connectors], connector 10 enabled? no [ 1.630015] [drm:drm_enable_connectors], connector 14 enabled? yes [ 1.630031] [drm:drm_target_preferred], looking for cmdline mode on connector 14 [ 1.630035] [drm:drm_target_preferred], looking for preferred mode on connector 14 [ 1.630037] [drm:drm_target_preferred], found mode 2560x1600 [ 1.630039] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.630042] [drm:drm_setup_crtcs], desired mode 2560x1600 set on crtc 3 [ 1.630044] [drm:intelfb_create], no BIOS fb, allocating a new one [ 1.630047] [drm:i915_gem_object_create_stolen], creating stolen object: size=fa0000 [ 1.630050] [drm:i915_pages_create_for_stolen], offset=0x0, size=16384000 [ 1.631443] usb 2-1.3: New USB device found, idVendor=0424, idProduct=2514 [ 1.631447] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.631744] hub 2-1.3:1.0: USB hub found [ 1.631814] hub 2-1.3:1.0: 4 ports detected [ 1.634221] [drm:intelfb_create], allocated 2560x1600 fb: 0x00072000, bo ffff88041482dc80 [ 1.634283] fbcon: inteldrmfb (fb0) is primary device [ 1.634335] [drm:intel_crtc_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 1.634337] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 1.634338] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.634340] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.634343] [drm:drm_mode_debug_printmodeline], Modeline 35:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9 [ 1.634345] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 1.634346] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 1.634349] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.634352] [drm:connected_sink_compute_bpp], [CONNECTOR:14:DP-1] checking for sink bpp constrains [ 1.634354] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 268500KHz [ 1.634358] [drm:intel_dp_compute_config], DP link bw 0a lane count 4 clock 270000 bpp 24 [ 1.634360] [drm:intel_dp_compute_config], DP link bw required 644400 available 864000 [ 1.634362] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 4 [ 1.634363] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.634365] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 1.634366] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.634367] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.634369] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 4, gmch_m: 6256503, gmch_n: 8388608, link_m: 521375, link_n: 524288, tu: 64 [ 1.634371] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6256503, gmch_n: 8388608, link_m: 521375, link_n: 524288, tu: 64 [ 1.634371] [drm:intel_dump_pipe_config], requested mode: [ 1.634374] [drm:drm_mode_debug_printmodeline], Modeline 0:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9 [ 1.634375] [drm:intel_dump_pipe_config], adjusted mode: [ 1.634377] [drm:drm_mode_debug_printmodeline], Modeline 0:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9 [ 1.634380] [drm:intel_dump_crtc_timings], crtc timings: 268500 2560 2608 2640 2720 1600 1603 1609 1646, type: 0x48 flags: 0x9 [ 1.634381] [drm:intel_dump_pipe_config], port clock: 270000 [ 1.634382] [drm:intel_dump_pipe_config], pipe src size: 2560x1600 [ 1.634383] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.634384] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.634385] [drm:intel_dump_pipe_config], ips: 0 [ 1.634386] [drm:intel_dump_pipe_config], double wide: 0 [ 1.634575] [drm:intel_dp_link_down], [ 1.654087] random: nonblocking pool is initialized [ 1.676815] md: bind [ 1.686077] [drm:g4x_wait_for_vblank], vblank wait timed out [ 1.701371] md: bind [ 1.705235] usb 2-1.5: new low-speed USB device number 4 using ehci-pci [ 1.739095] [drm:g4x_wait_for_vblank], vblank wait timed out [ 1.784892] usb 2-1.5: New USB device found, idVendor=0461, idProduct=4d51 [ 1.784894] usb 2-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.784896] usb 2-1.5: Product: DELL Laser Mouse [ 1.788535] input: DELL Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:0461:4D51.0001/input/input5 [ 1.788812] hid-generic 0003:0461:4D51.0001: input,hidraw0: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-0000:00:1d.0-1.5/input0 [ 1.841150] ------------[ cut here ]------------ [ 1.841184] WARNING: CPU: 2 PID: 311 at drivers/gpu/drm/i915/intel_display.c:857 intel_wait_for_pipe_off+0x1db/0x1f0 [i915]() [ 1.841184] pipe_off wait timed out [ 1.841190] Modules linked in: i915(+) i2c_algo_bit drm_kms_helper drm i2c_core video [ 1.841192] CPU: 2 PID: 311 Comm: systemd-udevd Not tainted 3.14.2-200.fc20.x86_64 #1 [ 1.841193] Hardware name: Dell Inc. OptiPlex 990/06D7TR, BIOS A17 03/14/2013 [ 1.841197] 0000000000000000 000000009796de53 ffff880036c4d298 ffffffff816eec92 [ 1.841200] ffff880036c4d2e0 ffff880036c4d2d0 ffffffff8108a1bd ffff8804149e4000 [ 1.841202] 0000000000070008 00000000fffb733e 0000000000000000 ffff880414c75b10 [ 1.841203] Call Trace: [ 1.841210] [] dump_stack+0x45/0x56 [ 1.841215] [] warn_slowpath_common+0x7d/0xa0 [ 1.841218] [] warn_slowpath_fmt+0x5c/0x80 [ 1.841239] [] intel_wait_for_pipe_off+0x1db/0x1f0 [i915] [ 1.841255] [] intel_disable_pipe+0xa0/0xb0 [i915] [ 1.841271] [] ironlake_crtc_disable+0xe4/0x950 [i915] [ 1.841286] [] ? intel_dump_pipe_config.isra.45+0x35e/0x370 [i915] [ 1.841303] [] __intel_set_mode+0x894/0x1610 [i915] [ 1.841321] [] intel_set_mode+0x16/0x30 [i915] [ 1.841336] [] intel_crtc_set_config+0x7bb/0x990 [i915] [ 1.841350] [] drm_mode_set_config_internal+0x5d/0xe0 [drm] [ 1.841355] [] drm_fb_helper_set_par+0x71/0xf0 [drm_kms_helper] [ 1.841358] [] fbcon_init+0x4f4/0x570 [ 1.841361] [] visual_init+0xb8/0x120 [ 1.841364] [] do_bind_con_driver+0x163/0x330 [ 1.841368] [] do_take_over_console+0x114/0x1c0 [ 1.841370] [] do_fbcon_takeover+0x63/0xd0 [ 1.841372] [] fbcon_event_notify+0x60d/0x720 [ 1.841376] [] notifier_call_chain+0x4c/0x70 [ 1.841379] [] __blocking_notifier_call_chain+0x4d/0x70 [ 1.841382] [] blocking_notifier_call_chain+0x16/0x20 [ 1.841385] [] fb_notifier_call_chain+0x1b/0x20 [ 1.841387] [] register_framebuffer+0x1f6/0x340 [ 1.841391] [] drm_fb_helper_initial_config+0x33f/0x520 [drm_kms_helper] [ 1.841418] [] ? gen6_read32+0x52/0x110 [i915] [ 1.841440] [] ? gen6_write32+0x71/0x100 [i915] [ 1.841462] [] intel_fbdev_initial_config+0x21/0x30 [i915] [ 1.841481] [] i915_driver_load+0xe03/0xe30 [i915] [ 1.841492] [] ? drm_get_minor+0x1a5/0x200 [drm] [ 1.841501] [] drm_dev_register+0x7b/0x160 [drm] [ 1.841511] [] drm_get_pci_dev+0xa0/0x220 [drm] [ 1.841529] [] i915_pci_probe+0x3b/0x60 [i915] [ 1.841531] [] local_pci_probe+0x45/0xa0 [ 1.841534] [] pci_device_probe+0xf9/0x150 [ 1.841538] [] driver_probe_device+0x125/0x3a0 [ 1.841541] [] __driver_attach+0x93/0xa0 [ 1.841544] [] ? __device_attach+0x40/0x40 [ 1.841547] [] bus_for_each_dev+0x73/0xc0 [ 1.841550] [] driver_attach+0x1e/0x20 [ 1.841553] [] bus_add_driver+0x180/0x250 [ 1.841555] [] ? 0xffffffffa014afff [ 1.841557] [] driver_register+0x64/0xf0 [ 1.841558] [] ? 0xffffffffa014afff [ 1.841560] [] __pci_register_driver+0x4c/0x50 [ 1.841569] [] drm_pci_init+0x11a/0x130 [drm] [ 1.841571] [] ? 0xffffffffa014afff [ 1.841588] [] i915_init+0x6a/0x6c [i915] [ 1.841591] [] do_one_initcall+0xfa/0x1b0 [ 1.841594] [] ? set_memory_nx+0x43/0x50 [ 1.841598] [] load_module+0x1e2d/0x25c0 [ 1.841601] [] ? store_uevent+0x70/0x70 [ 1.841605] [] ? kernel_read+0x50/0x80 [ 1.841609] [] SyS_finit_module+0xa6/0xd0 [ 1.841612] [] system_call_fastpath+0x16/0x1b [ 1.841614] ---[ end trace 43d933aac273a8a3 ]--- [ 1.851349] usb 2-1.6: new low-speed USB device number 5 using ehci-pci [ 1.893174] [drm:ironlake_disable_pch_transcoder] *ERROR* failed to disable transcoder A [ 1.893184] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3 [ 1.893188] [drm:intel_disable_shared_dpll], disabling PCH DPLL A [ 1.893600] [drm:intel_update_fbc], no output, disabling [ 1.893638] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A [ 1.893640] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A [ 1.893641] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A [ 1.893642] [drm:intel_get_shared_dpll], setting up PCH DPLL A [ 1.893657] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 10240 [ 1.893661] [drm:intel_crtc_mode_set], [ENCODER:13:TMDS-13] set [MODE:0:2560x1600] [ 1.893663] [drm:intel_dp_mode_set], Enabling DP audio on pipe A [ 1.893666] [drm:intel_write_eld], ELD on [CONNECTOR:14:DP-1], [ENCODER:13:TMDS-13] [ 1.893667] [drm:ironlake_write_eld], ELD on pipe A [ 1.893670] [drm:ironlake_write_eld], Audio directed to unknown port [ 1.893670] [drm:ironlake_write_eld], ELD: DisplayPort detected [ 1.893677] [drm:ironlake_write_eld], ELD size 9 [ 1.907449] md: bind [ 1.911094] md: raid0 personality registered for level 0 [ 1.911345] md/raid0:md1: md_size is 3896438784 sectors. [ 1.911346] md: RAID0 configuration for md1 - 1 zone [ 1.911349] md: zone0=[sda5/sdb2] [ 1.911350] zone-offset= 0KB, device-offset= 0KB, size=1948219392KB [ 1.911360] md1: detected capacity change from 0 to 1994976657408 [ 1.911983] md: bind [ 1.915976] md: raid1 personality registered for level 1 [ 1.916317] md/raid1:md0: active with 2 out of 2 mirrors [ 1.916342] md0: detected capacity change from 0 to 524275712 [ 1.919211] md1: unknown partition table [ 1.921209] md0: unknown partition table [ 1.945138] usb 2-1.6: New USB device found, idVendor=413c, idProduct=2107 [ 1.945141] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.945143] usb 2-1.6: Product: Dell USB Entry Keyboard [ 1.945144] usb 2-1.6: Manufacturer: Dell [ 1.946189] [drm:g4x_wait_for_vblank], vblank wait timed out [ 1.949494] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:413C:2107.0002/input/input6 [ 1.949791] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.6/input0 [ 1.998219] [drm:g4x_wait_for_vblank], vblank wait timed out [ 1.999033] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700 [ 1.999035] [drm:gen6_fdi_link_train], FDI train 1 done. [ 1.999698] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 1.999700] [drm:gen6_fdi_link_train], FDI train 2 done. [ 1.999701] [drm:gen6_fdi_link_train], FDI train done. [ 1.999704] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3 [ 1.999706] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A [ 2.001082] [drm:intel_update_fbc], disabled per chip default [ 2.001128] [drm:cpt_serr_int_handler], PCH transcoder A FIFO underrun [ 2.001645] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.002159] [drm:intel_dp_set_signal_levels], Using signal levels 02000000 [ 2.002662] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.003162] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.003676] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.004175] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.004696] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.005205] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.005715] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.006218] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.006730] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.007232] [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up [ 2.008394] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.008903] [drm:intel_dp_set_signal_levels], Using signal levels 02000000 [ 2.009406] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.009907] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.010416] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.010915] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.011425] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.011927] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.012438] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.012940] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.013451] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.013949] [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up [ 2.015103] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.015610] [drm:intel_dp_set_signal_levels], Using signal levels 02000000 [ 2.016106] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.016604] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.017115] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.017612] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.018113] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.018616] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.019126] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.019625] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.020136] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.020636] [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up [ 2.021794] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.022303] [drm:intel_dp_set_signal_levels], Using signal levels 02000000 [ 2.022803] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.023304] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.023383] usb 2-1.3.1: new high-speed USB device number 6 using ehci-pci [ 2.023817] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.024315] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.024819] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.025322] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.025830] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.026329] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.026834] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.027330] [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up [ 2.028485] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.028993] [drm:intel_dp_set_signal_levels], Using signal levels 02000000 [ 2.029496] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.029999] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.030522] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.031022] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.031543] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.032045] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.032554] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.033049] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.033560] [drm:intel_dp_set_signal_levels], Using signal levels 06000000 [ 2.034056] [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up [ 2.035233] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.035737] [drm:intel_dp_start_link_train], clock recovery OK [ 2.036543] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 2.051248] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1] [ 2.051252] [drm:check_encoder_state], [ENCODER:8:DAC-8] [ 2.051256] [drm:check_encoder_state], [ENCODER:9:TMDS-9] [ 2.051267] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 2.051270] [drm:check_crtc_state], [CRTC:3] [ 2.051289] [drm:check_crtc_state], [CRTC:5] [ 2.051290] [drm:check_shared_dpll_state], PCH DPLL A [ 2.051294] [drm:check_shared_dpll_state], PCH DPLL B [ 2.051301] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 2.051303] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.051306] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 2.051313] Console: switching to colour frame buffer device 320x100 [ 2.051325] [drm:intel_crtc_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 2.051328] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.051330] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 2.065480] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.065483] i915 0000:00:02.0: registered panic notifier [ 2.072586] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.072900] acpi device:02: registered as cooling_device8 [ 2.073009] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 2.073121] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.109714] usb 2-1.3.1: New USB device found, idVendor=0424, idProduct=2640 [ 2.109720] usb 2-1.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.110118] hub 2-1.3.1:1.0: USB hub found [ 2.110159] hub 2-1.3.1:1.0: 2 ports detected [ 2.221041] bio: create slab at 1 [ 2.349527] Switched to clocksource tsc [ 2.383585] usb 2-1.3.1.1: new high-speed USB device number 7 using ehci-pci [ 2.492228] usb 2-1.3.1.1: New USB device found, idVendor=0424, idProduct=4064 [ 2.492233] usb 2-1.3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.492236] usb 2-1.3.1.1: Product: Ultra Fast Media Reader [ 2.492239] usb 2-1.3.1.1: Manufacturer: Generic [ 2.492241] usb 2-1.3.1.1: SerialNumber: T11000050200 [ 2.493911] PM: Starting manual resume from disk [ 2.493917] PM: Hibernation image partition 253:1 present [ 2.493919] PM: Looking for hibernation image. [ 2.494106] PM: Image not found (code -22) [ 2.494109] PM: Hibernation image not present or could not be loaded. [ 2.497261] usb-storage 2-1.3.1.1:1.0: USB Mass Storage device detected [ 2.497376] scsi6 : usb-storage 2-1.3.1.1:1.0 [ 2.497494] usbcore: registered new interface driver usb-storage [ 2.542973] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 2.723144] systemd-journald[149]: Received SIGTERM [ 2.726899] [drm:intel_print_rc6_info], Sandybridge: deep RC6 disabled [ 2.726903] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.730550] [drm:gen6_enable_rps], Overclocking supported. Max: 1350MHz, Overclock max: 1350MHz [ 3.504355] scsi 6:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.90 PQ: 0 ANSI: 0 [ 3.504803] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 3.512265] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 3.512866] audit: type=1404 audit(1399045226.355:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 3.604799] SELinux: 2048 avtab hash slots, 99776 rules. [ 3.626530] SELinux: 2048 avtab hash slots, 99776 rules. [ 3.655311] SELinux: 8 users, 86 roles, 4800 types, 281 bools, 1 sens, 1024 cats [ 3.655315] SELinux: 83 classes, 99776 rules [ 3.660444] SELinux: Completing initialization. [ 3.660446] SELinux: Setting up existing superblocks. [ 3.660452] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 3.660456] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 3.660461] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 3.660494] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.660527] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 3.661412] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 3.662187] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 3.662190] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 3.662194] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 3.662196] SELinux: initialized (dev aio, type aio), not configured for labeling [ 3.662199] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 3.662214] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 3.662223] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 3.662229] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 3.662238] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 3.662559] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 3.662561] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.662566] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.662663] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.662695] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662700] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts [ 3.662702] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662707] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662710] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662716] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662719] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662722] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662725] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662731] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662734] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.662738] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts [ 3.662745] SELinux: initialized (dev dm-0, type ext4), uses xattr [ 3.678844] audit: type=1403 audit(1399045226.521:3): policy loaded auid=4294967295 ses=4294967295 [ 3.725040] systemd[1]: Successfully loaded SELinux policy in 245.228ms. [ 3.877216] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. [ 3.909607] systemd[1]: Relabelled /dev and /run in 26.580ms. [ 5.480964] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 5.765207] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 5.765758] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 6.225092] systemd-udevd[615]: starting version 208 [ 6.320488] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 6.518140] RPC: Registered named UNIX socket transport module. [ 6.518144] RPC: Registered udp transport module. [ 6.518145] RPC: Registered tcp transport module. [ 6.518147] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.519045] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [ 6.569094] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.569479] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts [ 7.120791] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28 [ 7.147886] pps_core: LinuxPPS API ver. 1 registered [ 7.147889] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 7.148702] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258) [ 7.148710] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.149513] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.149859] PTP clock support registered [ 7.150000] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258) [ 7.150008] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.150013] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 7.150018] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.150020] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 7.150025] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.150027] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 7.150031] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.150033] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 7.155930] mei_me 0000:00:16.0: irq 52 for MSI/MSI-X [ 7.158132] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 7.158134] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 7.160410] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 7.160436] e1000e 0000:00:19.0: irq 53 for MSI/MSI-X [ 7.175414] parport0: PC-style at 0x378 (0x778) [ 7.197395] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28 [ 7.197917] microcode: CPU0 updated to revision 0x29, date = 2013-06-12 [ 7.197951] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28 [ 7.197985] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28 [ 7.198277] microcode: CPU1 updated to revision 0x29, date = 2013-06-12 [ 7.198287] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28 [ 7.198317] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28 [ 7.198608] microcode: CPU2 updated to revision 0x29, date = 2013-06-12 [ 7.198617] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28 [ 7.198650] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28 [ 7.198941] microcode: CPU3 updated to revision 0x29, date = 2013-06-12 [ 7.198950] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x28 [ 7.198981] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x28 [ 7.199269] microcode: CPU4 updated to revision 0x29, date = 2013-06-12 [ 7.199277] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x28 [ 7.199303] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x28 [ 7.199597] microcode: CPU5 updated to revision 0x29, date = 2013-06-12 [ 7.199621] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x28 [ 7.199647] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x28 [ 7.199938] microcode: CPU6 updated to revision 0x29, date = 2013-06-12 [ 7.199948] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x28 [ 7.199969] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x28 [ 7.200261] microcode: CPU7 updated to revision 0x29, date = 2013-06-12 [ 7.200304] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 7.227372] alg: No test for crc32 (crc32-pclmul) [ 7.279771] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 7.290728] iTCO_vendor_support: vendor-support=0 [ 7.291962] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 7.291990] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 7.292743] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.294412] ppdev: user-space parallel port driver [ 7.296752] [PCSPP,TRISTATE] [ 7.296756] parport0: irq 7 detected [ 7.424006] e1000e 0000:00:19.0 eth0: registered PHC clock [ 7.424014] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:99:6b:c7 [ 7.424019] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 7.424070] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF [ 7.692949] systemd-udevd[639]: renamed network interface eth0 to em1 [ 7.786627] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X [ 7.805688] hda_codec: ALC269VB: SKU not ready 0x411111f0 [ 7.806249] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 7.806255] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 7.806259] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 7.806262] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 7.806265] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 7.806269] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x19 [ 7.806272] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x18 [ 7.806276] ALSA sound/pci/hda/patch_realtek.c:504 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d [ 7.806279] ALSA sound/pci/hda/patch_realtek.c:578 realtek: Enable default setup for auto mode as fallback [ 7.822016] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 7.822315] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 7.822486] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.822697] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.822836] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 8.074423] Adding 33554428k swap on /dev/mapper/vg_lucifer-swap. Priority:-1 extents:1 across:33554428k FS [ 8.618639] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 8.751769] SELinux: initialized (dev md0, type ext4), uses xattr [ 9.782790] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 9.782801] SELinux: initialized (dev dm-3, type ext4), uses xattr [ 9.807544] systemd-journald[593]: Received request to flush runtime journal from PID 1 [ 10.206622] audit: type=1305 audit(1399038033.046:4): audit_pid=918 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 10.820605] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.823395] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 14.801700] [drm:i915_gem_open], [ 14.801744] [drm:intel_crtc_cursor_set], cursor off [ 14.801749] [drm:intel_crtc_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 14.801753] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 14.801756] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 14.801759] [drm:intel_crtc_cursor_set], cursor off [ 14.801762] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 14.801764] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 14.801767] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 15.052707] Bridge firewalling registered [ 15.052850] [drm:i915_gem_open], [ 15.052867] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3] [ 15.052934] [drm:intel_crtc_cursor_set], cursor off [ 15.052940] [drm:intel_crtc_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 15.052946] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 15.052951] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 15.052955] [drm:intel_crtc_cursor_set], cursor off [ 15.052958] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 15.052962] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 15.052966] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 15.053142] [drm:i915_gem_open], [ 15.053163] [drm:intel_crtc_cursor_set], cursor off [ 15.053168] [drm:intel_crtc_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 15.053172] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 15.053176] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 15.053180] [drm:intel_crtc_cursor_set], cursor off [ 15.053183] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 15.053186] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 15.053190] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 15.053219] [drm:i915_gem_open], [ 15.053739] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3] [ 15.053747] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3] [ 15.053813] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 15.053817] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 15.053820] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 15.053824] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 15.053826] [drm:intel_crt_detect], CRT not detected via hotplug [ 15.053994] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 15.053997] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 15.053999] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 15.054001] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 15.054363] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 15.054368] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 15.054370] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 15.054373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected [ 15.054379] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 15.054381] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 15.054383] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 15.054387] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 15.054388] [drm:intel_crt_detect], CRT not detected via hotplug [ 15.054546] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 15.054548] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 15.054552] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 15.054554] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 15.054905] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 15.054907] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 15.054909] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 15.054911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected [ 15.054955] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 15.054958] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 15.054961] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 15.055122] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 15.055125] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 15.055127] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 15.055131] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 15.055133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 15.055136] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 15.056557] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 15.056564] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 15.056570] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 15.056646] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 15.056650] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 15.056655] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 15.056943] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00 [ 15.057656] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.081351] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.100384] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.100389] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 15.101065] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.119912] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.138676] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.138742] [drm:drm_edid_to_eld], ELD monitor DELL U3011 [ 15.138745] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 15.138783] [drm:drm_mode_debug_printmodeline], Modeline 72:"1440x480i" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 15.138785] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 15.138788] [drm:drm_mode_debug_printmodeline], Modeline 73:"1440x576i" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a [ 15.138790] [drm:drm_mode_prune_invalid], Not using 1440x576i mode 3 [ 15.138793] [drm:drm_mode_debug_printmodeline], Modeline 93:"1440x480i" 60 27027 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 15.138795] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 15.138800] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes : [ 15.138803] [drm:drm_mode_debug_printmodeline], Modeline 16:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9 [ 15.138806] [drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1440" 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 [ 15.138810] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 [ 15.138813] [drm:drm_mode_debug_printmodeline], Modeline 17:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 15.138816] [drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 15.138819] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 15.138822] [drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 15.138825] [drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 15.138828] [drm:drm_mode_debug_printmodeline], Modeline 48:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 15.138831] [drm:drm_mode_debug_printmodeline], Modeline 50:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 15.138835] [drm:drm_mode_debug_printmodeline], Modeline 64:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 15.138838] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 15.138841] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 15.138844] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 15.138847] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 15.138850] [drm:drm_mode_debug_printmodeline], Modeline 21:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 15.138853] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 15.138856] [drm:drm_mode_debug_printmodeline], Modeline 53:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 15.138859] [drm:drm_mode_debug_printmodeline], Modeline 47:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 15.138862] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 15.138865] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 15.138868] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 15.138871] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 15.138875] [drm:drm_mode_debug_printmodeline], Modeline 44:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 15.138878] [drm:drm_mode_debug_printmodeline], Modeline 54:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 15.138881] [drm:drm_mode_debug_printmodeline], Modeline 20:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 15.138884] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 15.138887] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 15.138890] [drm:drm_mode_debug_printmodeline], Modeline 42:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 15.138893] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 15.138930] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 15.139280] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 15.139283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 15.139286] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 15.139289] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 15.139291] [drm:intel_crt_detect], CRT not detected via hotplug [ 15.139443] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 15.139446] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 15.139448] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 15.139451] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 15.139798] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 15.139801] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 15.139803] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 15.139806] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected [ 15.139810] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 15.139813] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 15.139815] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 15.139818] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 15.139819] [drm:intel_crt_detect], CRT not detected via hotplug [ 15.139969] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 15.139971] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 15.139973] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 15.139975] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 15.140326] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 15.140328] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 15.140330] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 15.140333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected [ 15.140373] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 15.140376] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 15.140379] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 15.140529] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 15.140531] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 15.140534] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 15.140538] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 15.140541] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 15.140543] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 15.140693] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 15.140695] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 15.140698] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 15.140729] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 15.140731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 15.140734] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 15.140999] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00 [ 15.141678] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.160399] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.179129] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.179132] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 15.179798] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.198412] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.210415] e1000e 0000:00:19.0: irq 53 for MSI/MSI-X [ 15.216981] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 15.217037] [drm:drm_edid_to_eld], ELD monitor DELL U3011 [ 15.217039] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 15.217067] [drm:drm_mode_debug_printmodeline], Modeline 72:"1440x480i" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 15.217069] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 15.217072] [drm:drm_mode_debug_printmodeline], Modeline 73:"1440x576i" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a [ 15.217073] [drm:drm_mode_prune_invalid], Not using 1440x576i mode 3 [ 15.217076] [drm:drm_mode_debug_printmodeline], Modeline 93:"1440x480i" 60 27027 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 15.217078] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 15.217083] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes : [ 15.217086] [drm:drm_mode_debug_printmodeline], Modeline 16:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9 [ 15.217089] [drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1440" 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 [ 15.217092] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 [ 15.217094] [drm:drm_mode_debug_printmodeline], Modeline 17:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 15.217097] [drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 15.217100] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 15.217103] [drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 15.217105] [drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 15.217108] [drm:drm_mode_debug_printmodeline], Modeline 48:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 15.217111] [drm:drm_mode_debug_printmodeline], Modeline 50:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 15.217114] [drm:drm_mode_debug_printmodeline], Modeline 64:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 15.217116] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 15.217119] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 15.217122] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 15.217124] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 15.217127] [drm:drm_mode_debug_printmodeline], Modeline 21:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 15.217130] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 15.217132] [drm:drm_mode_debug_printmodeline], Modeline 53:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 15.217135] [drm:drm_mode_debug_printmodeline], Modeline 47:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 15.217137] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 15.217140] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 15.217143] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 15.217146] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 15.217148] [drm:drm_mode_debug_printmodeline], Modeline 44:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 15.217151] [drm:drm_mode_debug_printmodeline], Modeline 54:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 15.217153] [drm:drm_mode_debug_printmodeline], Modeline 20:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 15.217156] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 15.217159] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 15.217161] [drm:drm_mode_debug_printmodeline], Modeline 42:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 15.217164] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 15.217194] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 15.222716] [drm:drm_mode_addfb], [FB:37] [ 15.222767] [drm:drm_mode_setcrtc], [CRTC:3] [ 15.222771] [drm:drm_mode_setcrtc], [CONNECTOR:14:DP-1] [ 15.222774] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0) [ 15.222777] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 [ 15.222779] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 15.232000] [drm:ironlake_update_plane], Writing base 01012000 00000000 0 0 10240 [ 15.247334] [drm:drm_mode_setcrtc], [CRTC:5] [ 15.247338] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 15.247341] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 15.247344] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 15.311390] e1000e 0000:00:19.0: irq 53 for MSI/MSI-X [ 15.311497] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready [ 15.314937] device em1 entered promiscuous mode [ 15.371466] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 16.466629] [drm:i915_gem_open], [ 16.475384] [drm:i915_gem_context_create_ioctl], HW context 1 created [ 16.478599] [drm:i915_gem_context_destroy_ioctl], HW context 1 destroyed [ 16.821459] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 16.821771] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00 [ 16.822465] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 16.841904] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 16.860979] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 16.860983] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 16.861025] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 16.861179] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 16.861184] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 16.861219] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 16.861223] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 16.861225] [drm:intel_crt_detect], CRT not detected via hotplug [ 16.861379] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 16.861382] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 16.861384] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 16.861386] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 16.861733] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 16.861735] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 16.861737] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 18.118684] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 18.118694] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 18.118699] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 18.118705] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 18.118708] [drm:intel_crt_detect], CRT not detected via hotplug [ 18.118910] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 18.118916] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.118918] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 18.118920] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 18.119273] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.119276] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 18.119277] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 18.119281] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected [ 18.119290] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 18.119293] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 18.119295] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 18.119298] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 18.119300] [drm:intel_crt_detect], CRT not detected via hotplug [ 18.119457] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 18.119459] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.119461] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 18.119463] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 18.119853] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.119856] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 18.119858] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 18.119860] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected [ 18.119872] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 18.119875] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 18.119877] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 18.120053] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 18.120056] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 18.120059] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 18.120064] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 18.120066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 18.120068] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 18.120226] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 18.120230] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 18.120233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 18.120262] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 18.120267] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 18.120274] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 18.120562] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00 [ 18.121279] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.141002] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.160580] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.160586] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 18.161277] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.180597] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.199758] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 18.199824] [drm:drm_edid_to_eld], ELD monitor DELL U3011 [ 18.199827] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 18.199866] [drm:drm_mode_debug_printmodeline], Modeline 73:"1440x480i" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 18.199868] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 18.199872] [drm:drm_mode_debug_printmodeline], Modeline 74:"1440x576i" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a [ 18.199873] [drm:drm_mode_prune_invalid], Not using 1440x576i mode 3 [ 18.199877] [drm:drm_mode_debug_printmodeline], Modeline 94:"1440x480i" 60 27027 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 18.199879] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 18.199884] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes : [ 18.199887] [drm:drm_mode_debug_printmodeline], Modeline 16:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9 [ 18.199890] [drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1440" 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 [ 18.199894] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 [ 18.199897] [drm:drm_mode_debug_printmodeline], Modeline 17:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 18.199900] [drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 18.199903] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 18.199907] [drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 18.199910] [drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 18.199913] [drm:drm_mode_debug_printmodeline], Modeline 48:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 18.199916] [drm:drm_mode_debug_printmodeline], Modeline 50:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 18.199920] [drm:drm_mode_debug_printmodeline], Modeline 64:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 18.199923] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 18.199926] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 18.199929] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 18.199932] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 18.199936] [drm:drm_mode_debug_printmodeline], Modeline 21:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 18.199939] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 18.199942] [drm:drm_mode_debug_printmodeline], Modeline 53:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 18.199945] [drm:drm_mode_debug_printmodeline], Modeline 47:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 18.199948] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 18.199951] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 18.199955] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 18.199958] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 18.199961] [drm:drm_mode_debug_printmodeline], Modeline 44:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 18.199964] [drm:drm_mode_debug_printmodeline], Modeline 54:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 18.199967] [drm:drm_mode_debug_printmodeline], Modeline 20:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 18.199970] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 18.199973] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 18.199976] [drm:drm_mode_debug_printmodeline], Modeline 42:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 18.199980] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 18.199998] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 18.201595] [drm:i915_gem_open], [ 18.207667] [drm:i915_gem_context_create_ioctl], HW context 1 created [ 18.209923] [drm:i915_gem_context_destroy_ioctl], HW context 1 destroyed [ 18.211878] [drm:i915_gem_context_create_ioctl], HW context 1 created [ 18.927033] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 18.927078] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready [ 18.927123] br0: port 1(em1) entered forwarding state [ 18.927134] br0: port 1(em1) entered forwarding state [ 18.927195] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 19.075792] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 19.075800] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 19.075803] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 19.075808] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 19.075810] [drm:intel_crt_detect], CRT not detected via hotplug [ 19.075977] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 19.075981] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 19.075983] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 19.075985] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 19.076348] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 19.076352] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 19.076354] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 19.076357] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected [ 19.076363] [drm:drm_mode_getconnector], [CONNECTOR:7:?] [ 19.076366] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] [ 19.076368] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1 [ 19.076371] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 19.076373] [drm:intel_crt_detect], CRT not detected via hotplug [ 19.076528] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 19.076531] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 19.076533] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 19.076536] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 19.076887] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 19.076889] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 19.076892] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 19.076895] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected [ 19.076907] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 19.076910] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 19.076913] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 19.077080] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 19.077089] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 19.077096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 19.077108] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 19.077113] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] [ 19.077115] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1] [ 19.077273] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 19.077276] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 19.077278] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected [ 19.077297] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 19.077300] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 19.077305] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 19.077598] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00 [ 19.078313] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.098105] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.117349] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.117354] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 19.118036] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.137127] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.156130] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 19.156209] [drm:drm_edid_to_eld], ELD monitor DELL U3011 [ 19.156211] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 19.156256] [drm:drm_mode_debug_printmodeline], Modeline 73:"1440x480i" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 19.156259] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 19.156263] [drm:drm_mode_debug_printmodeline], Modeline 74:"1440x576i" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a [ 19.156265] [drm:drm_mode_prune_invalid], Not using 1440x576i mode 3 [ 19.156269] [drm:drm_mode_debug_printmodeline], Modeline 94:"1440x480i" 60 27027 1440 1478 1602 1716 480 488 494 525 0x40 0x101a [ 19.156271] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3 [ 19.156277] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes : [ 19.156281] [drm:drm_mode_debug_printmodeline], Modeline 16:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9 [ 19.156285] [drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1440" 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 [ 19.156289] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 [ 19.156293] [drm:drm_mode_debug_printmodeline], Modeline 17:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 19.156296] [drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 19.156300] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 19.156304] [drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 19.156308] [drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 19.156312] [drm:drm_mode_debug_printmodeline], Modeline 48:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 19.156316] [drm:drm_mode_debug_printmodeline], Modeline 50:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 19.156319] [drm:drm_mode_debug_printmodeline], Modeline 64:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 19.156323] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 19.156327] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 19.156331] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 19.156335] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9 [ 19.156339] [drm:drm_mode_debug_printmodeline], Modeline 21:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 19.156342] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 19.156346] [drm:drm_mode_debug_printmodeline], Modeline 53:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 19.156350] [drm:drm_mode_debug_printmodeline], Modeline 47:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 19.156353] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 19.156357] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 19.156361] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 19.156365] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 19.156368] [drm:drm_mode_debug_printmodeline], Modeline 44:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 19.156372] [drm:drm_mode_debug_printmodeline], Modeline 54:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 19.156376] [drm:drm_mode_debug_printmodeline], Modeline 20:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 19.156379] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 19.156383] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 19.156387] [drm:drm_mode_debug_printmodeline], Modeline 42:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 19.156390] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 19.156405] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 25.311002] [drm:drm_mode_addfb], [FB:38] [ 25.346787] [drm:drm_mode_addfb], [FB:37] [ 25.372878] [drm:drm_mode_addfb], [FB:38] [ 25.786337] [drm:drm_mode_addfb], [FB:37] [ 25.789917] [drm:drm_mode_addfb], [FB:38] [ 25.806607] [drm:drm_mode_addfb], [FB:37] [ 25.823350] [drm:drm_mode_addfb], [FB:38] [ 25.839993] [drm:drm_mode_addfb], [FB:37] [ 25.856709] [drm:drm_mode_addfb], [FB:38] [ 25.873357] [drm:drm_mode_addfb], [FB:37] [ 25.890040] [drm:drm_mode_addfb], [FB:38] [ 25.906749] [drm:drm_mode_addfb], [FB:37] [ 25.923409] [drm:drm_mode_addfb], [FB:38] [ 25.940122] [drm:drm_mode_addfb], [FB:37] [ 25.956796] [drm:drm_mode_addfb], [FB:38] [ 25.973449] [drm:drm_mode_addfb], [FB:37] [ 25.990131] [drm:drm_mode_addfb], [FB:38] [ 26.006812] [drm:drm_mode_addfb], [FB:37] [ 26.023496] [drm:drm_mode_addfb], [FB:38] [ 26.040178] [drm:drm_mode_addfb], [FB:37] [ 26.056859] [drm:drm_mode_addfb], [FB:38] [ 26.073541] [drm:drm_mode_addfb], [FB:37] [ 26.090222] [drm:drm_mode_addfb], [FB:38] [ 26.106905] [drm:drm_mode_addfb], [FB:37] [ 26.123588] [drm:drm_mode_addfb], [FB:38] [ 26.140270] [drm:drm_mode_addfb], [FB:37] [ 26.156922] [drm:drm_mode_addfb], [FB:38] [ 26.173603] [drm:drm_mode_addfb], [FB:37] [ 26.190285] [drm:drm_mode_addfb], [FB:38] [ 26.206968] [drm:drm_mode_addfb], [FB:37] [ 26.223650] [drm:drm_mode_addfb], [FB:38] [ 26.240333] [drm:drm_mode_addfb], [FB:37] [ 26.257015] [drm:drm_mode_addfb], [FB:38] [ 26.273697] [drm:drm_mode_addfb], [FB:37] [ 26.290385] [drm:drm_mode_addfb], [FB:38] [ 26.307030] [drm:drm_mode_addfb], [FB:37] [ 26.500679] [drm:intel_crtc_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 26.500684] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 [ 26.500686] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 26.500696] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 10240 [ 26.508499] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 26.508502] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 26.508505] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 26.508508] [drm:intel_crtc_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 26.508511] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 26.508512] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 26.508526] [drm:intel_crtc_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 26.508528] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 26.508529] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 28.077111] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.358450] Ebtables v2.0 registered [ 28.471466] NFSD: starting 90-second grace period (net ffffffff81cc8c00) [ 28.500513] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.508029] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.520409] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.527677] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.543789] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.556703] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.568820] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.577761] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.593932] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.603818] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.612778] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.630779] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.638832] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.650784] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.666880] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.687794] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.697730] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.706737] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.718735] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.728738] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.737768] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.748741] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.754759] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.759794] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.766743] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.772756] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.785740] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.793803] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.801820] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.809825] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.814837] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.819795] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.824840] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.830842] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.835847] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.840847] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.843912] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 28.843958] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 28.848856] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.862861] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.872877] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.880319] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 28.880947] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 28.887908] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 28.941802] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 29.050183] tun: Universal TUN/TAP device driver, 1.6 [ 29.050188] tun: (C) 1999-2004 Max Krasnyansky [ 29.080545] device virbr0-nic entered promiscuous mode [ 29.152250] virbr0: port 1(virbr0-nic) entered listening state [ 29.152261] virbr0: port 1(virbr0-nic) entered listening state [ 29.152324] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 29.169157] virbr0: port 1(virbr0-nic) entered disabled state [ 29.538531] [drm:intel_crtc_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 29.538533] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 29.538535] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:3] [ 32.231001] device vnet0 entered promiscuous mode [ 32.240583] br0: port 2(vnet0) entered forwarding state [ 32.240592] br0: port 2(vnet0) entered forwarding state [ 32.606528] device vnet1 entered promiscuous mode [ 32.611644] br0: port 3(vnet1) entered forwarding state [ 32.611652] br0: port 3(vnet1) entered forwarding state [ 44.233957] kvm [2889]: vcpu0 unhandled rdmsr: 0x345 [ 44.234892] kvm [2889]: vcpu0 unhandled wrmsr: 0x680 data 0 [ 44.235814] kvm [2889]: vcpu0 unhandled wrmsr: 0x6c0 data 0 [ 44.236739] kvm [2889]: vcpu0 unhandled wrmsr: 0x681 data 0 [ 44.237641] kvm [2889]: vcpu0 unhandled wrmsr: 0x6c1 data 0 [ 44.238587] kvm [2889]: vcpu0 unhandled wrmsr: 0x682 data 0 [ 44.239513] kvm [2889]: vcpu0 unhandled wrmsr: 0x6c2 data 0 [ 44.240451] kvm [2889]: vcpu0 unhandled wrmsr: 0x683 data 0 [ 44.241337] kvm [2889]: vcpu0 unhandled wrmsr: 0x6c3 data 0 [ 44.242257] kvm [2889]: vcpu0 unhandled wrmsr: 0x684 data 0 [ 44.243209] kvm [2889]: vcpu0 unhandled wrmsr: 0x6c4 data 0