Linux version 2.6.23-git17 (root@kant) (gcc version 4.2.2 (Gentoo 4.2.2 p1.0)) #2 SMP Mon Oct 22 11:24:30 EEST 2007 Command line: usbcore.autosuspend=1 hid.pb_fnmode=2 root=/dev/sda3 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003e0f6000 (usable) BIOS-e820: 000000003e0f6000 - 000000003e2f7000 (ACPI NVS) BIOS-e820: 000000003e2f7000 - 000000003eebe000 (ACPI data) BIOS-e820: 000000003eebe000 - 000000003eeef000 (ACPI NVS) BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI data) BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 254198) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000FE020, 0024 (r2 APPLE ) ACPI: XSDT 3EEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) ACPI: FACP 3EEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) ACPI: DSDT 3EEF0000, 41E4 (r1 APPLE MacBook 20001 INTL 20050309) ACPI: FACS 3EEC0000, 0040 ACPI: HPET 3EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) ACPI: APIC 3EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) ACPI: MCFG 3EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) ACPI: ASF! 3EEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) ACPI: SBST 3EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) ACPI: ECDT 3EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) ACPI: SSDT 3EEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) ACPI: SSDT 3EEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) ACPI: SSDT 3EEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 254198) 1 entries of 256 used No mptable found. Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 254198 On node 0 totalpages: 254101 DMA zone: 56 pages used for memmap DMA zone: 1228 pages reserved DMA zone: 2715 pages, LIFO batch:0 DMA32 zone: 3419 pages used for memmap DMA32 zone: 246683 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 29488 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 249398 Kernel command line: usbcore.autosuspend=1 hid.pb_fnmode=2 root=/dev/sda3 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 hpet clockevent registered TSC calibrated against HPET time.c: Detected 1994.998 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... Memory: 995648k/1016792k available (3142k kernel code, 20536k reserved, 1207k data, 200k init) Calibrating delay using timer specific routine.. 3994.52 BogoMIPS (lpj=7989045) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 10390627 Detected 10.390 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980091) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs net_namespace: 120 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 - ffffffff ACPI: EC: EC description table is found, configuring boot EC ACPI: System BIOS is requesting _OSI(Linux) ACPI: If "acpi_osi=Linux" works better, Please send dmidecode to linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved PCI: Bridge: 0000:00:1c.0 IO window: 1000-1fff MEM window: 50200000-502fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: 50100000-501fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 50000000-500fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered fuse init (API version 7.9) SGI XFS with large block/inode numbers, no debug enabled io scheduler noop registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] power_supply ADP1: uevent power_supply ADP1: No power supply yet power_supply ADP1: power_supply_changed ACPI: AC Adapter [ADP1] (on-line) power_supply ADP1: power_supply_changed_work power_supply ADP1: uevent power_supply ADP1: POWER_SUPPLY_NAME=ADP1 power_supply ADP1: Static prop TYPE=Mains power_supply ADP1: 1 dynamic props power_supply ADP1: prop ONLINE=1 power_supply BAT0: uevent power_supply BAT0: No power supply yet power_supply BAT0: power_supply_changed ACPI: Battery Slot [BAT0] (battery present) power_supply BAT0: power_supply_changed_work power_supply BAT0: uevent power_supply BAT0: POWER_SUPPLY_NAME=BAT0 power_supply BAT0: Static prop TYPE=Battery power_supply BAT0: 11 dynamic props power_supply BAT0: prop STATUS=Full power_supply BAT0: prop PRESENT=1 power_supply BAT0: prop TECHNOLOGY=Unknown power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10950000 power_supply BAT0: prop VOLTAGE_NOW=12582000 power_supply BAT0: prop CURRENT_NOW=0 power_supply BAT0: prop ENERGY_FULL_DESIGN=50200000 power_supply BAT0: prop ENERGY_FULL=52500000 power_supply BAT0: prop ENERGY_NOW=52490000 power_supply BAT0: prop MODEL_NAME=ASMB013 power_supply BAT0: prop MANUFACTURER=DPON013 input: Power Button (FF) as /devices/virtual/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/virtual/input/input1 ACPI: Lid Switch [LID0] input: Power Button (CM) as /devices/virtual/input/input2 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/virtual/input/input3 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT 3EEB8C10, 026C (r1 APPLE Cpu0Ist 3000 INTL 20050309) ACPI: SSDT 3EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3EEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) ACPI: SSDT 3EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 16124K stolen memory. Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 agpgart: AGP aperture is 256M @ 0x40000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized i915 1.6.0 20060119 on minor 0 input: Macintosh mouse button emulation as /devices/virtual/input/input4 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller (0x8086:0x27df rev 0x02) at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x20b0-0x20b7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x20b8-0x20bf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: MATSHITADVD-R UJ-857D, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: selected mode 0x44 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19 ata2: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19 ata1.01: ATA-7: FUJITSU MHV2080BHPL, 00817030, max UDMA/100 ata1.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.01: configured for UDMA/100 scsi 0:0:1:0: Direct-Access ATA FUJITSU MHV2080B 0081 PQ: 0 ANSI: 5 sd 0:0:1:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:1:0: [sda] Attached SCSI disk usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0x50445400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 1-4: new high speed USB device using ehci_hcd and address 3 usb 1-4: configuration #1 chosen from 1 choice usb 2-2: new full speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice appletouch Geyser 3 inited. input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input5 usbcore: registered new interface driver appletouch i2c /dev entries driver EDAC MC: Ver: 2.1.0 Oct 22 2007 cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle Time: hpet clocksource has been installed. input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6 input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input7 input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 HID device claimed by neither input, hiddev nor hidraw input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input8 input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input9 input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 16 14:57:44 2007 UTC). ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 XFS mounting filesystem sda3 Starting XFS recovery on filesystem: sda3 (logdev: internal) Ending XFS recovery on filesystem: sda3 (logdev: internal) VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 200k freed power_supply ADP1: uevent power_supply ADP1: POWER_SUPPLY_NAME=ADP1 power_supply ADP1: Static prop TYPE=Mains power_supply ADP1: 1 dynamic props power_supply ADP1: prop ONLINE=1 power_supply BAT0: uevent power_supply BAT0: POWER_SUPPLY_NAME=BAT0 power_supply BAT0: Static prop TYPE=Battery power_supply BAT0: 11 dynamic props power_supply BAT0: prop STATUS=Full power_supply BAT0: prop PRESENT=1 power_supply BAT0: prop TECHNOLOGY=Unknown power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10950000 power_supply BAT0: prop VOLTAGE_NOW=12582000 power_supply BAT0: prop CURRENT_NOW=0 power_supply BAT0: prop ENERGY_FULL_DESIGN=50200000 power_supply BAT0: prop ENERGY_FULL=52500000 power_supply BAT0: prop ENERGY_NOW=52490000 power_supply BAT0: prop MODEL_NAME=ASMB013 power_supply BAT0: prop MANUFACTURER=DPON013 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 sky2 0000:01:00.0: v1.19 addr 0x50200000 irq 16 Yukon-EC (0xb6) rev 2 sky2 eth0: addr 00:17:f2:31:27:59 ath_hal: disagrees about version of symbol struct_module wlan: disagrees about version of symbol struct_module ath_pci: disagrees about version of symbol struct_module ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: STAC922x, Apple subsys_id=106b2200 Clocksource tsc unstable (delta = -258027138 ns) hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f000c sky2 eth0: enabling interface sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both hda: selected mode 0x44 appletouch: incomplete data package (first byte: 2, length: 4). Unable to handle kernel NULL pointer dereference at 00000000000003b0 RIP: [] unregister_netdevice+0x21/0x180 PGD abb2067 PUD 3ee9067 PMD 0 Oops: 0000 [1] SMP CPU 1 Modules linked in: snd_hda_intel snd_pcm snd_page_alloc i2c_i801 sky2 Pid: 4791, comm: modprobe Not tainted 2.6.23-git17 #2 RIP: 0010:[] [] unregister_netdevice+0x21/0x180 RSP: 0018:ffff81000a9addf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff80639050 RBP: ffff810003da5e80 R08: 0000000000000000 R09: 000000000000102a R10: 0000000000000000 R11: ffffffff8029f6a0 R12: ffff8100022c0800 R13: ffffffff8800c440 R14: ffffffff8800c498 R15: ffffffff8800c490 FS: 00002b16510c3b00(0000) GS:ffff810002076e40(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000003b0 CR3: 000000000aaf4000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 4791, threadinfo ffff81000a9ac000, task ffff810003e1a740) Stack: 0000000000000000 ffffffff804ae2d1 0000000000000000 ffffffff88004670 ffff8100022c0870 ffff8100022c0800 ffff8100022c6870 ffffffff80393a4c ffffffff8800c440 ffff8100022c0870 ffffffff8800c440 ffffffff803f91c2 Call Trace: [] unregister_netdev+0x11/0x20 [] :sky2:sky2_remove+0x40/0xf0 [] pci_device_remove+0x2c/0x60 [] __device_release_driver+0x82/0xc0 [] driver_detach+0xf5/0x100 [] bus_remove_driver+0x8d/0xb0 [] pci_unregister_driver+0x18/0x90 [] sys_delete_module+0x14d/0x1e0 [] __up_write+0x22/0x130 [] system_call+0x7e/0x83 Code: 8b 83 b0 03 00 00 85 c0 75 39 48 89 da 48 89 de 48 c7 c7 20 RIP [] unregister_netdevice+0x21/0x180 RSP CR2: 00000000000003b0