Linux version 2.6.22.5-debug4 (nutz@syndicate) (gcc version 4.2.1 (Debian 4.2.1-5)) #15 SMP Tue Oct 2 19:27:57 CEST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
 BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
 BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
 BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 524224) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   524224
early_node_map[1] active PFN ranges
    0:        0 ->   524224
On node 0 totalpages: 524224
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2303 pages used for memmap
  HighMem zone: 292545 pages, LIFO batch:31
DMI present.
ACPI: RSDP 000FB810, 0024 (r2 ACPIAM)
ACPI: XSDT 7FFC0100, 0054 (r1 A_M_I_ OEMXSDT   5000728 MSFT       97)
ACPI: FACP 7FFC0290, 00F4 (r3 A_M_I_ OEMFACP   5000728 MSFT       97)
ACPI: DSDT 7FFC0440, 5288 (r1  A0626 A0626000        0 INTL  2002026)
ACPI: FACS 7FFCE000, 0040
ACPI: APIC 7FFC0390, 0070 (r1 A_M_I_ OEMAPIC   5000728 MSFT       97)
ACPI: MCFG 7FFC0400, 003C (r1 A_M_I_ OEMMCFG   5000728 MSFT       97)
ACPI: OEMB 7FFCE040, 0060 (r1 A_M_I_ AMI_OEM   5000728 MSFT       97)
ACPI: HPET 7FFC56D0, 0038 (r1 A_M_I_ OEMHPET0  5000728 MSFT       97)
ACPI: SSDT 7FFC5710, 028A (r1 A_M_I_ POWERNOW        1 AMD         1)
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
Boot CPU = 0
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
Int: type 0, pol 0, trig 0, bus 0, irq 0, 2-0
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Int: type 0, pol 1, trig 3, bus 0, irq 9, 2-9
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Int: type 0, pol 1, trig 1, bus 0, irq 14, 2-14
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Int: type 0, pol 1, trig 1, bus 0, irq 15, 2-15
Bus #0 is ISA
ACPI: IRQ0 used by override.
Int: type 0, pol 0, trig 0, bus 0, irq 1, 2-1
Int: type 0, pol 0, trig 0, bus 0, irq 2, 2-2
Int: type 0, pol 0, trig 0, bus 0, irq 3, 2-3
Int: type 0, pol 0, trig 0, bus 0, irq 4, 2-4
Int: type 0, pol 0, trig 0, bus 0, irq 5, 2-5
Int: type 0, pol 0, trig 0, bus 0, irq 6, 2-6
Int: type 0, pol 0, trig 0, bus 0, irq 7, 2-7
Int: type 0, pol 0, trig 0, bus 0, irq 8, 2-8
ACPI: IRQ9 used by override.
Int: type 0, pol 0, trig 0, bus 0, irq 10, 2-10
Int: type 0, pol 0, trig 0, bus 0, irq 11, 2-11
Int: type 0, pol 0, trig 0, bus 0, irq 12, 2-12
Int: type 0, pol 0, trig 0, bus 0, irq 13, 2-13
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists.  Total pages: 520129
Kernel command line: console=ttyS0,115200n8 hpet=disable apic=debug debug
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2612.089 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073580k/2096896k available (3096k kernel code, 22168k reserved, 1004k data, 252k init, 1179392k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9d000 - 0xfffff000   ( 392 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0509000 - 0xc0548000   ( 252 kB)
      .data : 0xc0406165 - 0xc05013d0   (1004 kB)
      .text : 0xc0100000 - 0xc0406165   (3096 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 5227.23 BogoMIPS (lpj=2613616)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 861 Objects with 65 Devices 274 Methods 19 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
 tbxface-0587 [02] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [02] enable                : Transition to ACPI mode successful
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ESR value before enabling vector: 0x00000004  after: 0x00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 5223.33 BogoMIPS (lpj=2611667)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
Total of 2 processors activated (10450.56 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...  failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... failed :(.
Kernel panic - not syncing: IO-APIC + timer doesn't work!  Boot with apic=debug and send a report.  Then try booting with the 'noapic' option