[ 0.000000] Linux version 2.6.22-10-generic (buildd@palmer) (gcc version 4.1.3 20070812 (prerelease) (Ubuntu 4.1.2-15ubuntu2)) #1 SMP Wed Aug 22 08:11:52 GMT 2007 (Ubuntu 2.6.22-10.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable) [ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 447MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 114671) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 114671 [ 0.000000] HighMem 114671 -> 114671 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 114671 [ 0.000000] On node 0 totalpages: 114671 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 863 pages used for memmap [ 0.000000] Normal zone: 109712 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00) [ 0.000000] ACPI: RSDT 1BFFC2D0, 002C (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: FACP 1BFFFB00, 0074 (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: DSDT 1BFFC310, 37E2 (r1 INSYDE PN800 1000 INTL 2002036) [ 0.000000] ACPI: FACS 1BFFFFC0, 0040 [ 0.000000] ACPI: APIC 1BFFFB90, 0068 (r1 INSYDE APIC_000 30303030 0000 10200) [ 0.000000] ACPI: BIOS age (400) fails cutoff (2000), acpi=force is required to enable ACPI [ 0.000000] ACPI: acpi=force override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000) [ 0.000000] Built 1 zonelists. Total pages: 113776 [ 0.000000] Kernel command line: root=UUID=68735286-9074-4e91-9625-0b5d872ab4d2 ro quiet acpi=force splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1492.843 MHz processor. [ 14.947243] Console: colour VGA+ 80x25 [ 14.947543] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 14.947844] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 14.964176] Memory: 443540k/458684k available (2010k kernel code, 14632k reserved, 917k data, 364k init, 0k highmem) [ 14.964188] virtual kernel memory layout: [ 14.964189] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 14.964190] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 14.964192] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) [ 14.964193] lowmem : 0xc0000000 - 0xdbfef000 ( 447 MB) [ 14.964195] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 14.964196] .data : 0xc02f69c6 - 0xc03dbe64 ( 917 kB) [ 14.964198] .text : 0xc0100000 - 0xc02f69c6 (2010 kB) [ 14.964202] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 14.964253] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 15.044171] Calibrating delay using timer specific routine.. 2989.00 BogoMIPS (lpj=5978002) [ 15.044203] Security Framework v1.0.0 initialized [ 15.044214] SELinux: Disabled at boot. [ 15.044231] Mount-cache hash table entries: 512 [ 15.044395] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.044411] CPU: L1 I cache: 32K, L1 D cache: 32K [ 15.044414] CPU: L2 cache: 1024K [ 15.044418] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000000 00000000 00000000 [ 15.044428] Compat vDSO mapped to ffffe000. [ 15.044443] Checking 'hlt' instruction... OK. [ 15.060270] SMP alternatives: switching to UP code [ 15.060496] Freeing SMP alternatives: 11k freed [ 15.060804] Early unpacking initramfs... done [ 15.430699] ACPI: Core revision 20070126 [ 15.430781] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 15.441395] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08 [ 15.441427] Total of 1 processors activated (2989.00 BogoMIPS). [ 15.442190] ENABLING IO-APIC IRQs [ 15.442516] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 15.587455] Brought up 1 CPUs [ 15.587629] Booting paravirtualized kernel on bare hardware [ 15.587728] Time: 13:12:05 Date: 08/01/107 [ 15.587760] NET: Registered protocol family 16 [ 15.587867] EISA bus registered [ 15.587886] ACPI: bus type pci registered [ 15.587966] PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1 [ 15.587969] PCI: Using configuration type 1 [ 15.587971] Setting up standard PCI resources [ 15.590359] ACPI: EC: Look up EC in DSDT [ 15.590986] ACPI: EC: GPE=0x01, ports=0x66, 0x62 [ 15.593344] ACPI: Interpreter enabled [ 15.593347] ACPI: (supports S0 S1 S3 S4 S5) [ 15.593370] ACPI: Using IOAPIC for interrupt routing [ 15.603852] ACPI: EC: GPE=0x01, ports=0x66, 0x62 [ 15.603913] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.603935] PCI: Probing PCI hardware (bus 00) [ 15.604653] PCI quirk: region 1000-107f claimed by vt8235 PM [ 15.604658] PCI quirk: region 1400-140f claimed by vt8235 SMB [ 15.605014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.617021] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 15.617122] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15) [ 15.617218] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 15.617313] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15) [ 15.617400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 15.617488] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 15.617577] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 15.617664] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 15.617775] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. [ 15.617894] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11 [ 15.618053] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled. [ 15.618138] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da6167e0), AE_TYPE [ 15.618148] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 15.618155] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 15.618159] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0 [ 15.618239] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.618250] pnp: PnP ACPI init [ 15.618260] ACPI: bus type pnp registered [ 15.622689] pnp: PnP ACPI: found 9 devices [ 15.622692] ACPI: ACPI bus type pnp unregistered [ 15.622698] PnPBIOS: Disabled by ACPI PNP [ 15.622759] PCI: Using ACPI for IRQ routing [ 15.622763] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.625081] NET: Registered protocol family 8 [ 15.625083] NET: Registered protocol family 20 [ 15.625153] pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 15.625157] pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 15.625161] pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 15.625165] pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 15.625171] pnp: 00:07: ioport range 0x330-0x331 has been reserved [ 15.625178] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 15.625181] pnp: 00:07: ioport range 0x1000-0x107f has been reserved [ 15.625185] pnp: 00:07: ioport range 0x1400-0x140f has been reserved [ 15.627357] Time: tsc clocksource has been installed. [ 15.655477] PCI: Bridge: 0000:00:01.0 [ 15.655480] IO window: c000-dfff [ 15.655486] MEM window: c0000000-cfffffff [ 15.655491] PREFETCH window: 90000000-9fffffff [ 15.655515] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 15.655530] NET: Registered protocol family 2 [ 15.695302] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 15.695350] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 15.695590] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 15.695726] TCP: Hash tables configured (established 16384 bind 16384) [ 15.695730] TCP reno registered [ 15.707407] checking if image is initramfs... it is [ 16.158617] Switched to high resolution mode on CPU 0 [ 16.430887] Freeing initrd memory: 6778k freed [ 16.431444] audit: initializing netlink socket (disabled) [ 16.431467] audit(1188652325.056:1): initialized [ 16.433657] VFS: Disk quotas dquot_6.5.1 [ 16.433719] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 16.433841] io scheduler noop registered [ 16.433844] io scheduler anticipatory registered [ 16.433846] io scheduler deadline registered [ 16.433867] io scheduler cfq registered (default) [ 16.433886] PCI: VIA PCI bridge detected. Disabling DAC. [ 16.433944] Boot video device is 0000:01:00.0 [ 16.434183] isapnp: Scanning for PnP cards... [ 16.788138] isapnp: No Plug & Play device found [ 16.826922] Real Time Clock Driver v1.12ac [ 16.827061] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.828607] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.828908] input: Macintosh mouse button emulation as /class/input/input0 [ 16.829008] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 16.839531] i8042.c: Detected active multiplexing controller, rev 1.1. [ 16.844606] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.844613] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 16.844616] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 16.844619] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 16.844622] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 16.844849] mice: PS/2 mouse device common for all mice [ 16.845531] EISA: Probing bus 0 at eisa.0 [ 16.845543] Cannot allocate resource for EISA slot 1 [ 16.845576] EISA: Detected 0 cards. [ 16.845720] TCP cubic registered [ 16.845745] NET: Registered protocol family 1 [ 16.845781] Using IPI No-Shortcut mode [ 16.845995] Magic number: 7:637:229 [ 16.846527] Freeing unused kernel memory: 364k freed [ 16.897121] input: AT Translated Set 2 keyboard as /class/input/input1 [ 18.058756] Capability LSM initialized [ 18.086329] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 18.086336] ACPI: Processor [CPU0] (supports 16 throttling states) [ 18.092942] ACPI: Thermal Zone [TZ0] (0 C) [ 18.666706] usbcore: registered new interface driver usbfs [ 18.666739] usbcore: registered new interface driver hub [ 18.666765] usbcore: registered new device driver usb [ 18.667738] USB Universal Host Controller Interface driver v3.0 [ 18.667980] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da6167e0), AE_TYPE [ 18.667990] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 18.667997] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 18.668002] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 18.668007] ACPI: Invalid IRQ link routing entry [ 18.668009] ACPI: Unable to derive IRQ for device 0000:00:10.0 [ 18.668012] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11 [ 18.668041] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 18.668324] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 18.668361] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200 [ 18.668501] usb usb1: configuration #1 chosen from 1 choice [ 18.668526] hub 1-0:1.0: USB hub found [ 18.668532] hub 1-0:1.0: 2 ports detected [ 18.741348] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 18.741356] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 18.771238] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da6167e0), AE_TYPE [ 18.771250] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 18.771258] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 18.771262] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 18.771268] ACPI: Invalid IRQ link routing entry [ 18.771270] ACPI: Unable to derive IRQ for device 0000:00:10.1 [ 18.771273] ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7 [ 18.771302] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 18.771333] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 18.771372] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220 [ 18.771481] usb usb2: configuration #1 chosen from 1 choice [ 18.771507] hub 2-0:1.0: USB hub found [ 18.771514] hub 2-0:1.0: 2 ports detected [ 18.869457] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 18.875055] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da6167e0), AE_TYPE [ 18.875068] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 18.875075] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 18.875080] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 18.875085] ACPI: Invalid IRQ link routing entry [ 18.875088] ACPI: Unable to derive IRQ for device 0000:00:10.2 [ 18.875090] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5 [ 18.875120] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 18.875152] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 18.875189] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240 [ 18.875308] usb usb3: configuration #1 chosen from 1 choice [ 18.875337] hub 3-0:1.0: USB hub found [ 18.875346] hub 3-0:1.0: 2 ports detected [ 3.864000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.888000] Time: acpi_pm clocksource has been installed. [ 3.912000] PCI: Enabling device 0000:00:10.3 (0000 -> 0002) [ 3.912000] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da6167e0), AE_TYPE [ 3.912000] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 3.912000] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126] [ 3.912000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 3.912000] ACPI: Invalid IRQ link routing entry [ 3.912000] ACPI: Unable to derive IRQ for device 0000:00:10.3 [ 3.912000] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10 [ 3.912000] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 3.912000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 3.912000] ehci_hcd 0000:00:10.3: irq 10, io mem 0x20010000 [ 3.912000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.912000] usb usb4: configuration #1 chosen from 1 choice [ 3.912000] hub 4-0:1.0: USB hub found [ 3.912000] hub 4-0:1.0: 6 ports detected [ 4.016000] VP_IDE: IDE controller at PCI slot 0000:00:11.1 [ 4.016000] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug [ 4.016000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 4.016000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 4.016000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 4.016000] VP_IDE: chipset revision 6 [ 4.016000] VP_IDE: not 100% native mode: will probe irqs later [ 4.016000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [ 4.016000] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio [ 4.016000] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:pio, hdd:pio [ 4.016000] Probing IDE interface ide0... [ 4.432000] hda: WDC WD800UE-22HCT0, ATA DISK drive [ 5.104000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.152000] Probing IDE interface ide1... [ 5.728000] SCSI subsystem initialized [ 5.736000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23 [ 5.736000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23 [ 5.736000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 17 [ 5.740000] eth0: VIA Rhine II at 0x1e200, 00:40:d0:8c:b7:37, IRQ 17. [ 5.740000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. [ 5.740000] libata version 2.21 loaded. [ 5.748000] hda: max request size: 128KiB [ 5.748000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) [ 5.748000] hda: cache flushes supported [ 5.748000] hda: hda1 hda2 hda4 < hda5 hda6 hda7 > [ 6.272000] Attempting manual resume [ 6.272000] swsusp: Resume From Partition 3:5 [ 6.272000] PM: Checking swsusp image. [ 6.272000] PM: Resume from disk failed. [ 6.308000] kjournald starting. Commit interval 5 seconds [ 6.308000] EXT3-fs: mounted filesystem with ordered data mode. [ 20.900000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 22.176000] NET: Registered protocol family 17 [ 22.392000] Linux agpgart interface v0.102 (c) Dave Jones [ 22.452000] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset [ 22.456000] agpgart: AGP aperture is 32M @ 0xa0000000 [ 22.512000] ath_hal: module license 'Proprietary' taints kernel. [ 22.516000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 22.644000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 22.808000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.144000] wlan: 0.8.4.2 (0.9.3.2) [ 23.236000] ath_pci: 0.9.4.5 (0.9.3.2) [ 23.236000] PCI: Enabling device 0000:00:06.0 (0000 -> 0002) [ 23.236000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 24.236000] irda_init() [ 24.236000] NET: Registered protocol family 23 [ 24.308000] ath_rate_sample: 1.2 (0.9.3.2) [ 24.308000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 24.308000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 24.308000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 24.308000] wifi0: mac 7.8 phy 4.5 radio 5.6 [ 24.308000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 24.308000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 24.308000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 24.308000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 24.308000] wifi0: Use hw queue 8 for CAB traffic [ 24.308000] wifi0: Use hw queue 9 for beacons [ 24.468000] wifi0: Atheros 5212: mem=0x20000000, irq=18 [ 24.544000] input: PC Speaker as /class/input/input2 [ 24.700000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb3, caps: 0xa04713/0x0 [ 24.748000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 25.236000] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug [ 25.236000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22 [ 25.236000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 25.236000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19 [ 25.236000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 25.972000] fuse init (API version 7.8) [ 26.048000] lp: driver loaded but no devices found [ 26.076000] Adding 1020088k swap on /dev/disk/by-uuid/36e9fbed-1278-4dd8-901f-9a14b01a7e12. Priority:-1 extents:1 across:1020088k [ 26.304000] EXT3 FS on hda6, internal journal [ 26.504000] NET: Registered protocol family 10 [ 26.504000] lo: Disabled Privacy Extensions [ 34.788000] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 34.860000] NTFS volume version 3.1. [ 36.708000] eth0: no IPv6 routers present [ 37.396000] ath0: no IPv6 routers present [ 39.180000] No dock devices found. [ 39.236000] ACPI: AC Adapter [AC] (on-line) [ 39.280000] ACPI: Battery Slot [BAT0] (battery present) [ 39.308000] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no) [ 39.524000] input: Power Button (FF) as /class/input/input4 [ 39.528000] ACPI: Power Button (FF) [PWRF] [ 39.576000] input: Lid Switch as /class/input/input5 [ 39.584000] ACPI: Lid Switch [LID] [ 39.632000] input: Sleep Button (CM) as /class/input/input6 [ 39.632000] ACPI: Sleep Button (CM) [SBTN] [ 44.340000] ppdev: user-space parallel port driver [ 46.616000] apm: BIOS not found. [ 50.860000] [drm] Initialized drm 1.1.0 20060810 [ 51.372000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 51.372000] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 51.444000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 51.444000] agpgart: Device is in legacy mode, falling back to 2.x [ 51.444000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode [ 51.444000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode [ 51.452000] [drm:via_mem_alloc] *ERROR* Attempt to allocate from uninitialized memory manager. [ 57.992000] eth0: no IPv6 routers present