Linux version 2.6.22.1 (milh@ztrac.intra.bmlv.at) (gcc version 3.3.6 (Debian 1:3.3.6-15)) #8 SMP Fri Aug 17 13:44:23 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e400 (usable) BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f670000 (usable) BIOS-e820: 000000007f670000 - 000000007f700000 (ACPI NVS) BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f6540 Entering add_active_range(0, 0, 229376) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 early_node_map[1] active PFN ranges 0: 0 -> 229376 On node 0 totalpages: 229376 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 DMI present. ACPI: RSDP 000F6510, 0024 (r2 PTLTD ) ACPI: XSDT 7F679AA1, 0084 (r1 PTLTD XSDT 6040000 LTP 0) ACPI: FACP 7F682D6E, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1) ACPI: DSDT 7F67B2B9, 7A41 (r2 INTEL CALISTGA 6040000 INTL 20050624) ACPI: FACS 7F683FC0, 0040 ACPI: APIC 7F682E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: HPET 7F682ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: MCFG 7F682F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: TCPA 7F682F3E, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1) ACPI: APIC 7F682F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 7F682FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 7F67AC6A, 064F (r1 SataRe SataPri 1000 INTL 20050624) ACPI: SSDT 7F67A5CE, 069C (r1 SataRe SataSec 1000 INTL 20050624) ACPI: SSDT 7F67A0B1, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) ACPI: SSDT 7F67A00B, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) ACPI: SSDT 7F679B25, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) Built 1 zonelists. Total pages: 227584 Kernel command line: initrd=tftpboot_nosync/initrd-2.6 ramdisk_size=49152 root=1:0 init=/sbin/init pnpbios=off BOOT_IMAGE=tftpboot_nosync/bzImage-2.6 ip=10.10.136.74:10.10.137.246:0.0.0.0:255.255.0.0 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1666.832 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 890572k/917504k available (2163k kernel code, 26428k reserved, 791k data, 256k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb6000 - 0xfffff000 ( 292 kB) vmalloc : 0xf8800000 - 0xfffb4000 ( 119 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc03e9000 - 0xc0429000 ( 256 kB) .data : 0xc031ce83 - 0xc03e2c20 ( 791 kB) .text : 0xc0100000 - 0xc031ce83 (2163 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3338.02 BogoMIPS (lpj=6676043) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 10k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 923 Objects with 91 Devices 278 Methods 31 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 10 Objects with 3 Devices 4 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 11 Objects with 3 Devices 5 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 7 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 4 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0006) - 13 Objects with 0 Devices 4 Methods 0 Regions tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [02] enable : Transition to ACPI mode successful CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3333.84 BogoMIPS (lpj=6667695) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02 Total of 2 processors activated (6671.86 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=49 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xfd594, last bus=10 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 10 Wake, Enabled 4 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:....................................................................................... Initialized 31/31 Regions 0/0 Fields 43/43 Buffers 13/37 Packages (977 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org . Executed 1 _INI methods requiring 0 _STA executions (examined 102 objects) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #0a (-#0d) is hidden behind transparent bridge #08 (-#0a) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled SCSI subsystem initialized libata version 2.21 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: f6000000-f7ffffff PREFETCH window: f0000000-f1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 4000-4fff MEM window: f8000000-f9ffffff PREFETCH window: f2000000-f3ffffff PCI: Bridge: 0000:00:1c.3 IO window: 5000-5fff MEM window: fa000000-fbffffff PREFETCH window: f4000000-f5ffffff PCI: Bus 9, cardbus bridge: 0000:08:03.0 IO window: 00006000-000060ff IO window: 00006400-000064ff PREFETCH window: 88000000-8bffffff MEM window: 90000000-93ffffff PCI: Bus 10, cardbus bridge: 0000:08:03.1 IO window: 00006800-000068ff IO window: 00006c00-00006cff PREFETCH window: 8c000000-8fffffff MEM window: 94000000-97ffffff PCI: Bridge: 0000:00:1e.0 IO window: 6000-6fff MEM window: fc000000-fc0fffff PREFETCH window: 88000000-8fffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 16 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:08:03.1[B] -> GSI 17 (level, low) -> IRQ 16 NET: Registered protocol family 2 Time: tsc clocksource has been installed. IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 14871k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. io scheduler noop registered io scheduler anticipatory registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID0] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI: SSDT 7F67A310, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 008A) - 6 Objects with 0 Devices 3 Methods 0 Regions ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7F67A506, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 008D) - 4 Objects with 0 Devices 4 Methods 0 Regions ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] ACPI: Thermal Zone [THRM] (42 C) Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 7932kB intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Video mode must be programmed at boot time. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 49152K size 1024 blocksize loop: module loaded pcnet32.c:v1.33 27.Jun.2006 tsbogend@alpha.franken.de Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18 ICH7: chipset revision 2 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: Optiarc DVD RW AD-7530A, ATAPI CD/DVD-ROM drive hda: selected mode 0x42 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ata_piix 0000:00:1f.2: version 2.11 ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] ata_piix 0000:00:1f.2: invalid MAP value 0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x00012010 ctl 0x00012006 bmdma 0x000118b0 irq 18 ata2: SATA max UDMA/133 cmd 0x00012008 ctl 0x00012002 bmdma 0x000118b8 irq 18 ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001A, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Yenta: CardBus bridge found at 0000:08:03.0 [1211:0711] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:08:03.0, mfunc 0x018a1b22, devctl 0x66 Yenta: ISA IRQ mask 0x0cb8, PCI irq 17 Socket status: 30000411 pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff cs: IO port probe 0x6000-0x6fff: clean. pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfc0fffff pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff Yenta: CardBus bridge found at 0000:08:03.1 [1211:0711] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:08:03.1, mfunc 0x018a1b22, devctl 0x66 Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 Socket status: 30000086 Yenta: Raising subordinate bus# of parent bus (#08) from #0a to #0d pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff cs: IO port probe 0x6000-0x6fff: clean. pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfc0fffff pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff Databook TCIC-2 PCMCIA probe: not found. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. Starting balanced_irq Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 1 devices found input: AT Translated Set 2 keyboard as /class/input/input4 pccard: PCMCIA card inserted into slot 0 cs: memory probe 0xfc000000-0xfc0fffff: excluding 0xfc000000-0xfc00ffff pcmcia: registering new device pcmcia0.0 cm4040_cs 0.0: foo<5>RAMDISK: Compressed image found at block 0 VFS: Mounted root (romfs filesystem) readonly. Freeing unused kernel memory: 256k freed cbc: Unknown symbol crypto_get_attr_alg cbc: Unknown symbol crypto_alloc_instance cbc: Unknown symbol crypto_drop_spawn cbc: Unknown symbol crypto_register_template cbc: Unknown symbol crypto_spawn_tfm cbc: Unknown symbol crypto_unregister_template cbc: Unknown symbol crypto_check_attr_type cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte Non-volatile memory driver v1.2 usbhid: Unknown symbol usb_alloc_urb usbhid: Unknown symbol usb_free_urb usbhid: Unknown symbol usb_register_driver usbhid: Unknown symbol usb_reset_composite_device usbhid: Unknown symbol usb_clear_halt usbhid: Unknown symbol usb_submit_urb usbhid: Unknown symbol usb_control_msg usbhid: Unknown symbol usb_deregister usbhid: Unknown symbol usb_lock_device_for_reset usbhid: Unknown symbol usb_string usbhid: Unknown symbol usb_kill_urb usbhid: Unknown symbol usb_buffer_free usbhid: Unknown symbol __usb_get_extra_descriptor usbhid: Unknown symbol usb_buffer_alloc Probing IDE interface ide1... Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. sk98lin: driver has been replaced by the skge driver and is scheduled for removal Linux Tulip driver version 1.1.15 (Feb 27, 2007) 8139too Fast Ethernet driver 0.9.28 eepro100.c:v1.09j-t 9/29/99 Donald Becker eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. hamachi.c:v2.1 Sept 11, 2006 Written by Donald Becker Some modifications by Eric kasten Further modifications by Keith Underwood lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s). ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker ns83820.c: National Semiconductor DP83820 10/100/1000 driver. r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:04:00.0 to 64 eth0: RTL8168b/8111b at 0xf88d0000, 00:e6:3f:a8:00:17, IRQ 16 r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:06:00.0 to 64 eth1: RTL8168b/8111b at 0xf88ee000, 00:e6:3f:a8:00:99, IRQ 18 ThunderLAN driver v1.15 TLAN: 0 devices installed, PCI: 0 EISA: 0 via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker yellowfin.c:v1.05 1/09/2001 Written by Donald Becker (unofficial 2.4.x port, 2.1, Sep 11, 2006) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc440000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver sl811: driver sl811-hcd, 19 May 2005 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ext3: Unknown symbol journal_force_commit ext3: Unknown symbol journal_dirty_data ext3: Unknown symbol journal_force_commit_nested ext3: Unknown symbol journal_init_dev ext3: Unknown symbol journal_dirty_metadata ext3: Unknown symbol journal_forget ext3: Unknown symbol journal_wipe ext3: Unknown symbol journal_blocks_per_page ext3: Unknown symbol journal_errno ext3: Unknown symbol journal_extend ext3: Unknown symbol journal_invalidatepage ext3: Unknown symbol journal_create ext3: Unknown symbol journal_unlock_updates ext3: Unknown symbol journal_revoke ext3: Unknown symbol journal_lock_updates ext3: Unknown symbol journal_start_commit ext3: Unknown symbol journal_flush ext3: Unknown symbol journal_load ext3: Unknown symbol journal_try_to_free_buffers ext3: Unknown symbol journal_update_format ext3: Unknown symbol journal_get_write_access ext3: Unknown symbol journal_get_undo_access ext3: Unknown symbol journal_get_create_access ext3: Unknown symbol journal_destroy ext3: Unknown symbol journal_clear_err ext3: Unknown symbol journal_stop ext3: Unknown symbol journal_init_inode ext3: Unknown symbol journal_start ext3: Unknown symbol log_wait_commit ext3: Unknown symbol journal_release_buffer ext3: Unknown symbol journal_check_available_features ext3: Unknown symbol journal_abort ext3: Unknown symbol journal_restart NTFS driver 2.1.28 [Flags: R/W MODULE]. r8169: eth0: link up r8169: eth0: link up pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xa00-0xaff: clean. pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 cm4040_cs 0.0: foo