Linux version 2.6.22 (stas@lin2) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #4 SMP PREEMPT Thu Jul 26 16:48:47 MSD 2007 Command line: ro root=LABEL=/ BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 393200) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP 000F6CF0, 0014 (r0 Nvidia) ACPI: RSDT 5FFF3000, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) ACPI: FACP 5FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) ACPI: DSDT 5FFF30C0, 4CD6 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C) ACPI: FACS 5FFF0000, 0040 ACPI: MCFG 5FFF7E40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) ACPI: APIC 5FFF7DC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 393200) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 393200 On node 0 totalpages: 393103 DMA zone: 56 pages used for memmap DMA zone: 1279 pages reserved DMA zone: 2664 pages, LIFO batch:0 DMA32 zone: 5319 pages used for memmap DMA32 zone: 383785 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 68000000 (gap: 60000000:70000000) PERCPU: Allocating 34184 bytes of per cpu data Built 1 zonelists. Total pages: 386449 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2010.304 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ 4000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 1473668k/1572800k available (2823k kernel code, 98344k reserved, 1350k data, 256k init) SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 4023.12 BogoMIPS (lpj=8046243) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) SMP alternatives: switching to UP code Freeing SMP alternatives: 22k freed ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12564400 Detected 12.564 MHz APIC timer. Brought up 1 CPUs NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using MMCONFIG at d0000000 - dfffffff PCI: No mmconfig possible on device 00:18 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture ACPI: RTC can wake from S4 pnp: 00:01: ioport range 0x1000-0x107f has been reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff has been reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved pnp: 00:0b: iomem range 0xd0000000-0xdfffffff could not be reserved pnp: 00:0c: iomem range 0xd0000-0xd3fff has been reserved pnp: 00:0c: iomem range 0xd5800-0xd7fff has been reserved pnp: 00:0c: iomem range 0xf0000-0xfbfff could not be reserved pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved PCI: Bridge: 0000:00:09.0 IO window: 9000-9fff MEM window: f2000000-f20fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: 6000-6fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: 8000-8fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: 7000-7fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: a000-afff MEM window: f0000000-f1ffffff PREFETCH window: e0000000-efffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 Time: tsc clocksource has been installed. IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2912k freed audit: initializing netlink socket (disabled) audit(1185468656.600:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0e.0 Boot video device is 0000:05:00.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] parport0: Legacy device RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide1... hdd: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide SCSI Media Changer driver v0.25 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.0.1 Jul 20 2007 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 256k freed Write protecting the kernel read-only data: 1056k USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 23, io mem 0xf2102000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-7: new low speed USB device using ohci_hcd and address 2 usb 1-7: configuration #1 chosen from 1 choice usb 1-9: new low speed USB device using ohci_hcd and address 3 usb 1-9: configuration #1 chosen from 1 choice libata version 2.21 loaded. sata_nv 0000:00:07.0: version 3.4 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xffffc2000001a480 ctl 0xffffc2000001a4a0 bmdma 0x000000000001cc00 irq 21 ata2: SATA max UDMA/133 cmd 0xffffc2000001a580 ctl 0xffffc2000001a5a0 bmdma 0x000000000001cc08 irq 21 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: Host Protected Area detected: current size: 586112591 sectors native size: 586114704 sectors ata2.00: ATA-7: Maxtor 7L300S0, BANC1G10, max UDMA/133 ata2.00: 586112591 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: Host Protected Area detected: current size: 586112591 sectors native size: 586114704 sectors ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA Maxtor 7L300S0 BANC PQ: 0 ANSI: 5 ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 1:0:0:0: [sda] 586112591 512-byte hardware sectors (300090 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 586112591 512-byte hardware sectors (300090 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xffffc2000001c480 ctl 0xffffc2000001c4a0 bmdma 0x000000000001e000 irq 20 ata4: SATA max UDMA/133 cmd 0xffffc2000001c580 ctl 0xffffc2000001c5a0 bmdma 0x000000000001e008 irq 20 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) Linux video capture interface: v2.00 eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 8139cp 0000:01:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:01:07.0: Try the "8139too" driver instead. rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:04 failed with error -16 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 eth1: RealTek RTL8139 at 0xffffc20000020000, 00:40:f4:cc:4a:46, IRQ 19 eth1: Identified 8139 chip type 'RTL-8100B/8139D' usbcore: registered new interface driver hiddev input: KYE NetScroll Eye as /class/input/input0 input: USB HID v1.10 Mouse [KYE NetScroll Eye] on usb-0000:00:02.0-7 input: HID 0566:3002 as /class/input/input1 input: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:02.0-9 saa7130/34: v4l2 driver version 0.2.14 loaded ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 saa7134[0]: found at 0000:01:08.0, rev: 1, irq: 16, latency: 32, mmio: 0xf2001000 saa7134[0]: subsystem: 1461:9715, board: Avermedia AVerTV Studio 307 [card=45,autodetected] saa7134[0]: board init: gpio is 7c8 input: saa7134 IR (Avermedia AVerTV St as /class/input/input2 input: HID 0566:3002 as /class/input/input3 input,hiddev96: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:02.0-9 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.0 to 64 saa7134[0]: i2c eeprom 00: 61 14 15 97 ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 2-0043: chip found @ 0x86 (saa7134[0]) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (saa7134[0]) tuner 2-0061: type set to 51 (Philips PAL/SECAM_D (FM 1256 I-H3)) tuner 2-0061: type set to 51 (Philips PAL/SECAM_D (FM 1256 I-H3)) saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 saa7134[0]: registered device radio0 intel8x0_measure_ac97_clock: measured 54695 usecs intel8x0: clocking to 46881 loop: module loaded lp0: using parport0 (interrupt-driven). lp0: console ready input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! fuse init (API version 7.8) kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4096532k swap on /dev/sda6. Priority:-1 extents:1 across:4096532k ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 65536 max) Marking TSC unstable due to cpufreq changes Time: acpi_pm clocksource has been installed. NET: Registered protocol family 10 eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 PPP generic driver version 2.4.2 eth0: no IPv6 routers present i2c /dev entries driver it87: Found IT8712F chip at 0x290, revision 5 eth1: no IPv6 routers present