Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pata_via 0000:00:0f.0: version 0.3.1
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.01: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.00: configured for UDMA/133
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
ata1.01: failed to set xfermode (err_mask=0x1)
ata1: failed to recover some devices, retrying in 5 secs
ata1.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.00: configured for UDMA/133
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
ata1.01: failed to set xfermode (err_mask=0x1)
ata1.01: limiting speed to UDMA/133:PIO3
ata1: failed to recover some devices, retrying in 5 secs
ata1.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.00: configured for UDMA/133
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
XXX SETXFER status=0x51
ata1.01: failed to set xfermode (err_mask=0x1)
ata1.01: disabled
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
ata1.00: configured for UDMA/133
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-740A   1.01 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:00:10.4[D] -> GSI 23 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.4: EHCI Host Controller