uname -r: 3.12.0-031200rc7-generic dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.0-031200rc7-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201310271935 SMP Sun Oct 27 23:37:06 UTC 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-031200rc7-generic root=UUID=85259d26-9563-45e4-a36f-8f6c19ac62aa ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000090daffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000090db0000-0x00000000921affff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000921b0000-0x0000000096abefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000096abf000-0x0000000096ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000096ebf000-0x0000000096fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000096fbf000-0x0000000096ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000096fff000-0x0000000096ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000097000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire V3-571G/VA50_HC_CR, BIOS V2.15 03/11/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 097000000 mask FFF000000 uncachable [ 0.000000] 3 base 098000000 mask FF8000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask E00000000 write-back [ 0.000000] 7 base 400000000 mask F80000000 write-back [ 0.000000] 8 base 45F600000 mask FFFE00000 uncachable [ 0.000000] 9 base 45F800000 mask FFF800000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x97000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff] [ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff] [ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff] [ 0.000000] [mem 0x400000000-0x45bffffff] page 2M [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0x90daffff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0x90bfffff] page 2M [ 0.000000] [mem 0x90c00000-0x90daffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x921b0000-0x96abefff] [ 0.000000] [mem 0x921b0000-0x921fffff] page 4k [ 0.000000] [mem 0x92200000-0x969fffff] page 2M [ 0.000000] [mem 0x96a00000-0x96abefff] page 4k [ 0.000000] init_memory_mapping: [mem 0x96fff000-0x96ffffff] [ 0.000000] [mem 0x96fff000-0x96ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x3610e000-0x3707efff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0000000096ffe210 0009C (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0000000096ffb000 0010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0000000096fec000 0BB9E (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0000000096fba000 00040 [ 0.000000] ACPI: UEFI 0000000096ffd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASF! 0000000096ffc000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0000000096ffa000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0000000096ff9000 0008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0000000096ff8000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0000000096feb000 006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 0000000096fe9000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 0000000096fe4000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DBGP 0000000096fe3000 00034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 0000000096fe1000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MSDM 0000000096fe0000 00055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0000000096fdf000 00926 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0000000096fde000 00A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0000000096fda000 02185 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45f5fffff] [ 0.000000] NODE_DATA [mem 0x45f5e9000-0x45f5edfff] [ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ee00000-ffff88045ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x45f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0x90daffff] [ 0.000000] node 0: [mem 0x921b0000-0x96abefff] [ 0.000000] node 0: [mem 0x96fff000-0x96ffffff] [ 0.000000] node 0: [mem 0x100000000-0x45f5fffff] [ 0.000000] On node 0 totalpages: 4147803 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9491 pages used for memmap [ 0.000000] DMA32 zone: 607423 pages, LIFO batch:31 [ 0.000000] Normal zone: 55256 pages used for memmap [ 0.000000] Normal zone: 3536384 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0x90db0000-0x921affff] [ 0.000000] PM: Registered nosave memory: [mem 0x96abf000-0x96ebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x96ebf000-0x96fbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x96fbf000-0x96ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x97000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffc7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc80000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88045f200000 s86528 r8192 d24064 u262144 [ 0.000000] pcpu-alloc: s86528 r8192 d24064 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4082971 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-031200rc7-generic root=UUID=85259d26-9563-45e4-a36f-8f6c19ac62aa ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16231672K/16591212K available (7503K kernel code, 1113K rwdata, 3456K rodata, 1336K init, 1416K bss, 359540K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-255. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 66584576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2394.678 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.35 BogoMIPS (lpj=9578712) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000027] Security Framework initialized [ 0.000040] AppArmor: AppArmor initialized [ 0.000041] Yama: becoming mindful. [ 0.001106] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.005204] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006985] Mount-cache hash table entries: 256 [ 0.007148] Initializing cgroup subsys memory [ 0.007156] Initializing cgroup subsys devices [ 0.007158] Initializing cgroup subsys freezer [ 0.007159] Initializing cgroup subsys blkio [ 0.007161] Initializing cgroup subsys perf_event [ 0.007163] Initializing cgroup subsys hugetlb [ 0.007184] CPU: Physical Processor ID: 0 [ 0.007185] CPU: Processor Core ID: 0 [ 0.007190] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.007190] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.007563] mce: CPU supports 9 MCE banks [ 0.007576] CPU0: Thermal monitoring enabled (TM1) [ 0.007584] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.007584] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.007584] tlb_flushall_shift: 1 [ 0.007709] Freeing SMP alternatives memory: 28K (ffffffff81e66000 - ffffffff81e6d000) [ 0.008877] ACPI: Core revision 20130725 [ 0.014451] ACPI: All ACPI Tables successfully acquired [ 0.032907] ftrace: allocating 30865 entries in 121 pages [ 0.048473] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088193] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09) [ 0.088201] TSC deadline timer enabled [ 0.090362] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.090370] ... version: 3 [ 0.090371] ... bit width: 48 [ 0.090372] ... generic registers: 4 [ 0.090373] ... value mask: 0000ffffffffffff [ 0.090374] ... max period: 0000ffffffffffff [ 0.090375] ... fixed-purpose events: 3 [ 0.090376] ... event mask: 000000070000000f [ 0.105658] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.092051] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK [ 0.187373] Brought up 8 CPUs [ 0.187377] smpboot: Total of 8 processors activated (38314.84 BogoMIPS) [ 0.195146] devtmpfs: initialized [ 0.200184] EVM: security.selinux [ 0.200185] EVM: security.SMACK64 [ 0.200186] EVM: security.capability [ 0.200229] PM: Registering ACPI NVS region [mem 0x96ebf000-0x96fbefff] (1048576 bytes) [ 0.200967] pinctrl core: initialized pinctrl subsystem [ 0.201027] regulator-dummy: no parameters [ 0.201058] RTC time: 19:28:45, date: 10/28/13 [ 0.201090] NET: Registered protocol family 16 [ 0.201188] cpuidle: using governor ladder [ 0.201189] cpuidle: using governor menu [ 0.201223] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.201225] ACPI: bus type PCI registered [ 0.201227] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.201284] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.201286] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.207475] PCI: Using configuration type 1 for base access [ 0.208423] bio: create slab at 0 [ 0.208577] ACPI: Added _OSI(Module Device) [ 0.208579] ACPI: Added _OSI(Processor Device) [ 0.208580] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.208582] ACPI: Added _OSI(Processor Aggregator Device) [ 0.210285] ACPI: EC: Look up EC in DSDT [ 0.212009] ACPI: Executed 1 blocks of module-level executable AML code [ 0.219087] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.219448] ACPI: SSDT 0000000096df7018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.219884] ACPI: Dynamic OEM Table Load: [ 0.219886] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.227191] ACPI: SSDT 0000000096df8a98 00303 (v01 PmRef ApIst 00003000 INTL 20120913) [ 0.227651] ACPI: Dynamic OEM Table Load: [ 0.227653] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20120913) [ 0.235078] ACPI: SSDT 0000000096df6d98 00119 (v01 PmRef ApCst 00003000 INTL 20120913) [ 0.235508] ACPI: Dynamic OEM Table Load: [ 0.235510] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120913) [ 0.248233] ACPI: Interpreter enabled [ 0.248239] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.248244] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.248257] ACPI: (supports S0 S3 S4 S5) [ 0.248259] ACPI: Using IOAPIC for interrupt routing [ 0.248286] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.248439] ACPI: No dock devices found. [ 0.459858] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.459954] \_SB_.PCI0:_OSC invalid UUID [ 0.459955] _OSC request data:1 8 0 [ 0.460000] \_SB_.PCI0:_OSC invalid UUID [ 0.460001] _OSC request data:1 1f 0 [ 0.460004] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.460006] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.460548] ACPI: \_SB_.PCI0.WMID: can't evaluate _ADR (0x5) [ 0.460550] ACPI: \_SB_.PCI0.CWMI: can't evaluate _ADR (0x5) [ 0.460552] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5) [ 0.460657] PCI host bridge to bus 0000:00 [ 0.460659] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.460661] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.460663] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.460665] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.460666] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.460674] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.460758] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.460789] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.460833] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.460866] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.460877] pci 0000:00:02.0: reg 0x10: [mem 0xb3000000-0xb33fffff 64bit] [ 0.460884] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.460889] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.460989] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.461012] pci 0000:00:14.0: reg 0x10: [mem 0xb3600000-0xb360ffff 64bit] [ 0.461087] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.461130] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.461164] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.461188] pci 0000:00:16.0: reg 0x10: [mem 0xb3614000-0xb361400f 64bit] [ 0.461267] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.461349] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.461372] pci 0000:00:1a.0: reg 0x10: [mem 0xb3619000-0xb36193ff] [ 0.461466] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.461525] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.461559] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.461575] pci 0000:00:1b.0: reg 0x10: [mem 0xb3610000-0xb3613fff 64bit] [ 0.461645] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.461693] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.461723] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.461805] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.461854] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.461883] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.461964] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.462012] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.462052] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.462075] pci 0000:00:1d.0: reg 0x10: [mem 0xb3618000-0xb36183ff] [ 0.462168] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.462224] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.462256] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 [ 0.462429] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.462450] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.462458] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.462467] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.462475] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.462483] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.462491] pci 0000:00:1f.2: reg 0x24: [mem 0xb3617000-0xb36177ff] [ 0.462539] pci 0000:00:1f.2: PME# supported from D3hot [ 0.462607] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.462624] pci 0000:00:1f.3: reg 0x10: [mem 0xb3615000-0xb36150ff 64bit] [ 0.462646] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f] [ 0.462766] pci 0000:01:00.0: [10de:0fe1] type 00 class 0x030000 [ 0.462774] pci 0000:01:00.0: reg 0x10: [mem 0xb2000000-0xb2ffffff] [ 0.462782] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.462789] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.462795] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.462800] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.462838] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.471306] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.471312] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.471316] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb2ffffff] [ 0.471323] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.471482] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000 [ 0.471520] pci 0000:02:00.0: reg 0x10: [mem 0xb3430000-0xb343ffff 64bit pref] [ 0.471550] pci 0000:02:00.0: reg 0x18: [mem 0xb3440000-0xb344ffff 64bit pref] [ 0.471607] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref] [ 0.471718] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.471767] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.471847] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501 [ 0.471886] pci 0000:02:00.1: reg 0x10: [mem 0xb3400000-0xb340ffff 64bit pref] [ 0.472073] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.472186] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000 [ 0.472220] pci 0000:02:00.2: reg 0x10: [mem 0xb3410000-0xb341ffff 64bit pref] [ 0.472410] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold [ 0.472525] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000 [ 0.472563] pci 0000:02:00.3: reg 0x10: [mem 0xb3420000-0xb342ffff 64bit pref] [ 0.472748] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold [ 0.483434] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.483445] pci 0000:00:1c.0: bridge window [mem 0xb3400000-0xb34fffff 64bit pref] [ 0.483536] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000 [ 0.483563] pci 0000:03:00.0: reg 0x10: [mem 0xb3500000-0xb357ffff 64bit] [ 0.483628] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.483697] pci 0000:03:00.0: supports D1 D2 [ 0.483699] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.483731] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.495350] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.495361] pci 0000:00:1c.1: bridge window [mem 0xb3500000-0xb35fffff] [ 0.563822] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.563874] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.563923] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.563975] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.564024] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.564073] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.564122] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.564170] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.564421] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.564427] ACPI: \_SB_.PCI0: notify handler is installed [ 0.564487] Found 1 acpi root devices [ 0.564516] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.564596] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.564601] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.564603] vgaarb: loaded [ 0.564603] vgaarb: bridge control possible 0000:01:00.0 [ 0.564604] vgaarb: no bridge control possible 0000:00:02.0 [ 0.564740] SCSI subsystem initialized [ 0.564779] libata version 3.00 loaded. [ 0.564794] ACPI: bus type USB registered [ 0.564806] usbcore: registered new interface driver usbfs [ 0.564812] usbcore: registered new interface driver hub [ 0.564832] usbcore: registered new device driver usb [ 0.564939] PCI: Using ACPI for IRQ routing [ 0.566489] PCI: pci_cache_line_size set to 64 bytes [ 0.566609] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.566611] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.566612] e820: reserve RAM buffer [mem 0x90db0000-0x93ffffff] [ 0.566613] e820: reserve RAM buffer [mem 0x96abf000-0x97ffffff] [ 0.566615] e820: reserve RAM buffer [mem 0x97000000-0x97ffffff] [ 0.566616] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff] [ 0.566688] NetLabel: Initializing [ 0.566690] NetLabel: domain hash size = 128 [ 0.566690] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.566702] NetLabel: unlabeled traffic allowed by default [ 0.566754] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.566759] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.568789] Switched to clocksource hpet [ 0.573139] AppArmor: AppArmor Filesystem Enabled [ 0.573155] pnp: PnP ACPI init [ 0.573164] ACPI: bus type PNP registered [ 0.573227] pnp 00:00: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active) [ 0.573276] pnp 00:01: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.573329] pnp 00:02: [dma 4] [ 0.573343] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.573359] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.573433] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.573455] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.573494] system 00:06: [io 0x0680-0x069f] has been reserved [ 0.573496] system 00:06: [io 0xfd60-0xfd63] has been reserved [ 0.573498] system 00:06: [io 0x1000-0x100f] has been reserved [ 0.573500] system 00:06: [io 0xffff] has been reserved [ 0.573501] system 00:06: [io 0xffff] has been reserved [ 0.573503] system 00:06: [io 0x0400-0x0453] could not be reserved [ 0.573505] system 00:06: [io 0x0458-0x047f] has been reserved [ 0.573507] system 00:06: [io 0x0500-0x057f] has been reserved [ 0.573508] system 00:06: [io 0x164e-0x164f] has been reserved [ 0.573511] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.573532] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.573572] system 00:08: [io 0x0454-0x0457] has been reserved [ 0.573574] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.633014] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.633016] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.633018] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.633020] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.633022] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.633024] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.633025] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.633027] system 00:09: [mem 0xff000000-0xff000fff] has been reserved [ 0.633029] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved [ 0.633031] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.633033] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.633035] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.633256] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved [ 0.633258] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved [ 0.633260] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.633277] pnp: PnP ACPI: found 11 devices [ 0.633278] ACPI: bus type PNP unregistered [ 0.639450] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.639452] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref] [ 0.639454] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.639481] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff] [ 0.639483] pci 0000:00:1c.1: BAR 15: assigned [mem 0x9fc00000-0x9fcfffff pref] [ 0.639486] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000) [ 0.639488] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.639491] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.639494] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb2ffffff] [ 0.639496] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.639500] pci 0000:02:00.0: BAR 6: assigned [mem 0xb3450000-0xb34507ff pref] [ 0.639502] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.639508] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff] [ 0.639512] pci 0000:00:1c.0: bridge window [mem 0xb3400000-0xb34fffff 64bit pref] [ 0.639519] pci 0000:03:00.0: BAR 6: assigned [mem 0x9fc00000-0x9fc0ffff pref] [ 0.639521] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.639526] pci 0000:00:1c.1: bridge window [mem 0xb3500000-0xb35fffff] [ 0.639531] pci 0000:00:1c.1: bridge window [mem 0x9fc00000-0x9fcfffff pref] [ 0.639538] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.639539] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.639541] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.639543] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.639544] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.639546] pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb2ffffff] [ 0.639548] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.639549] pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fbfffff] [ 0.639551] pci_bus 0000:02: resource 2 [mem 0xb3400000-0xb34fffff 64bit pref] [ 0.639553] pci_bus 0000:03: resource 1 [mem 0xb3500000-0xb35fffff] [ 0.639555] pci_bus 0000:03: resource 2 [mem 0x9fc00000-0x9fcfffff pref] [ 0.639580] NET: Registered protocol family 2 [ 0.639812] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.640111] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.640221] TCP: Hash tables configured (established 131072 bind 65536) [ 0.640237] TCP: reno registered [ 0.640256] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.640309] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.640391] NET: Registered protocol family 1 [ 0.640402] pci 0000:00:02.0: Boot video device [ 0.673058] PCI: CLS 64 bytes, default 64 [ 0.673097] Trying to unpack rootfs image as initramfs... [ 0.932301] Freeing initrd memory: 15812K (ffff88003610e000 - ffff88003707f000) [ 0.932306] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.932308] software IO TLB [mem 0x92abf000-0x96abf000] (64MB) mapped at [ffff880092abf000-ffff880096abefff] [ 0.932346] Simple Boot Flag at 0x44 set to 0x1 [ 0.932601] Scanning for low memory corruption every 60 seconds [ 0.932851] Initialise module verification [ 0.932886] audit: initializing netlink socket (disabled) [ 0.932896] type=2000 audit(1382988525.896:1): initialized [ 0.960346] bounce pool size: 64 pages [ 0.960355] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.961638] zbud: loaded [ 0.961771] VFS: Disk quotas dquot_6.5.2 [ 0.961801] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.962174] fuse init (API version 7.22) [ 0.962235] msgmni has been set to 31733 [ 0.962693] Key type asymmetric registered [ 0.962695] Asymmetric key parser 'x509' registered [ 0.962720] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.962761] io scheduler noop registered [ 0.962762] io scheduler deadline registered (default) [ 0.962782] io scheduler cfq registered [ 0.962957] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.963234] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.963246] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.963297] intel_idle: MWAIT substates: 0x21120 [ 0.963299] intel_idle: v0.4 model 0x3A [ 0.963300] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.963533] ACPI: AC Adapter [ACAD] (on-line) [ 0.963630] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0 [ 0.963634] ACPI: Power Button [PWRB] [ 0.963663] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1 [ 0.963679] ACPI: Lid Switch [LID0] [ 0.963706] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2 [ 0.963708] ACPI: Sleep Button [SLPB] [ 0.963740] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.963742] ACPI: Power Button [PWRF] [ 0.963802] ACPI: Requesting acpi_cpufreq [ 0.964285] GHES: HEST is not enabled! [ 0.964351] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.021189] ACPI: Battery Slot [BAT1] (battery absent) [ 1.021278] Linux agpgart interface v0.103 [ 1.022522] brd: module loaded [ 1.023134] loop: module loaded [ 1.023408] libphy: Fixed MDIO Bus: probed [ 1.023472] tun: Universal TUN/TAP device driver, 1.6 [ 1.023473] tun: (C) 1999-2004 Max Krasnyansky [ 1.023510] PPP generic driver version 2.4.2 [ 1.023549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.023553] ehci-pci: EHCI PCI platform driver [ 1.023660] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1.023669] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.023674] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.023687] ehci-pci 0000:00:1a.0: debug port 2 [ 1.027610] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.027627] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb3619000 [ 1.037202] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.037245] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.037247] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.037249] usb usb1: Product: EHCI Host Controller [ 1.037250] usb usb1: Manufacturer: Linux 3.12.0-031200rc7-generic ehci_hcd [ 1.037252] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.037381] hub 1-0:1.0: USB hub found [ 1.037388] hub 1-0:1.0: 2 ports detected [ 1.037554] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1.037561] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.037565] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.037578] ehci-pci 0000:00:1d.0: debug port 2 [ 1.041477] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.041490] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb3618000 [ 1.053215] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.053252] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.053253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.053255] usb usb2: Product: EHCI Host Controller [ 1.053257] usb usb2: Manufacturer: Linux 3.12.0-031200rc7-generic ehci_hcd [ 1.053258] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.053375] hub 2-0:1.0: USB hub found [ 1.053380] hub 2-0:1.0: 2 ports detected [ 1.053454] ehci-platform: EHCI generic platform driver [ 1.053461] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.053463] ohci-platform: OHCI generic platform driver [ 1.053468] uhci_hcd: USB Universal Host Controller Interface driver [ 1.053574] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.053578] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.053581] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.053676] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.053697] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X [ 1.053754] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.053756] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.053758] usb usb3: Product: xHCI Host Controller [ 1.053759] usb usb3: Manufacturer: Linux 3.12.0-031200rc7-generic xhci_hcd [ 1.053761] usb usb3: SerialNumber: 0000:00:14.0 [ 1.053875] hub 3-0:1.0: USB hub found [ 1.053885] hub 3-0:1.0: 4 ports detected [ 1.054178] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.054181] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.054216] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.054217] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.054219] usb usb4: Product: xHCI Host Controller [ 1.054220] usb usb4: Manufacturer: Linux 3.12.0-031200rc7-generic xhci_hcd [ 1.054222] usb usb4: SerialNumber: 0000:00:14.0 [ 1.054335] hub 4-0:1.0: USB hub found [ 1.054344] hub 4-0:1.0: 4 ports detected [ 1.065345] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.087453] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.087457] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.087682] mousedev: PS/2 mouse device common for all mice [ 1.089415] rtc_cmos 00:07: RTC can wake from S4 [ 1.089565] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.089594] rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.089642] device-mapper: uevent: version 1.0.3 [ 1.089721] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 1.089726] Intel P-state driver initializing. [ 1.089737] Intel pstate controlling: cpu 0 [ 1.089749] Intel pstate controlling: cpu 1 [ 1.089764] Intel pstate controlling: cpu 2 [ 1.089775] Intel pstate controlling: cpu 3 [ 1.089784] Intel pstate controlling: cpu 4 [ 1.089797] Intel pstate controlling: cpu 5 [ 1.089807] Intel pstate controlling: cpu 6 [ 1.089818] Intel pstate controlling: cpu 7 [ 1.089840] ledtrig-cpu: registered to indicate activity on CPUs [ 1.089911] TCP: cubic registered [ 1.089983] NET: Registered protocol family 10 [ 1.090138] NET: Registered protocol family 17 [ 1.090144] Key type dns_resolver registered [ 1.090503] Loading module verification certificates [ 1.091308] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a7f035f509ed436d94ce2d388af172b507a85bc7' [ 1.091316] registered taskstats version 1 [ 1.093597] Key type trusted registered [ 1.095362] Key type encrypted registered [ 1.097273] AppArmor: AppArmor sha1 policy hashing enabled [ 1.097905] Magic number: 1:73:497 [ 1.098029] rtc_cmos 00:07: setting system clock to 2013-10-28 19:28:46 UTC (1382988526) [ 1.098162] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.098165] EDD information not available. [ 1.098216] PM: Hibernation image not present or could not be loaded. [ 1.099285] Freeing unused kernel memory: 1336K (ffffffff81d18000 - ffffffff81e66000) [ 1.099287] Write protecting the kernel read-only data: 12288k [ 1.100834] Freeing unused kernel memory: 676K (ffff880001757000 - ffff880001800000) [ 1.103031] Freeing unused kernel memory: 640K (ffff880001b60000 - ffff880001c00000) [ 1.117904] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.125191] udevd[145]: starting version 175 [ 1.151691] pps_core: LinuxPPS API ver. 1 registered [ 1.151694] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.151907] sdhci: Secure Digital Host Controller Interface driver [ 1.151909] sdhci: Copyright(c) Pierre Ossman [ 1.152615] PTP clock support registered [ 1.153053] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 1.153094] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it! [ 1.153203] mmc0: no vqmmc regulator found [ 1.153204] mmc0: no vmmc regulator found [ 1.153266] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA [ 1.154837] tg3.c:v3.133 (Jul 29, 2013) [ 1.155297] ahci 0000:00:1f.2: version 3.0 [ 1.155422] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.155450] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.169348] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.169357] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 1.169365] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.177971] scsi0 : ahci [ 1.178042] scsi1 : ahci [ 1.178089] scsi2 : ahci [ 1.178137] scsi3 : ahci [ 1.178181] scsi4 : ahci [ 1.178227] scsi5 : ahci [ 1.178256] ata1: SATA max UDMA/133 abar m2048@0xb3617000 port 0xb3617100 irq 42 [ 1.178257] ata2: DUMMY [ 1.178260] ata3: SATA max UDMA/133 abar m2048@0xb3617000 port 0xb3617200 irq 42 [ 1.178261] ata4: DUMMY [ 1.178262] ata5: DUMMY [ 1.178262] ata6: DUMMY [ 1.193218] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:b4:d0:14 [ 1.193220] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.193222] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.193223] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.349602] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.481986] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.481991] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.482354] hub 1-1:1.0: USB hub found [ 1.482440] hub 1-1:1.0: 6 ports detected [ 1.497650] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.504138] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/133 [ 1.504143] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.510653] ata1.00: configured for UDMA/133 [ 1.510918] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5 [ 1.511129] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.511147] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.511180] sd 0:0:0:0: [sda] Write Protect is off [ 1.511182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.511191] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.511241] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.575445] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 1.576606] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.649829] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 1.668458] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b [ 1.668462] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.668465] usb 3-2: Product: USB Receiver [ 1.668467] usb 3-2: Manufacturer: Logitech [ 1.672308] hidraw: raw HID events driver (C) Jiri Kosina [ 1.677240] usbcore: registered new interface driver usbhid [ 1.677242] usbhid: USB HID core driver [ 1.680069] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 1.777953] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.829935] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.831569] ata3.00: ATAPI: MATSHITABD-CMB UJ160, 1.00, max UDMA/133 [ 1.832999] ata3.00: configured for UDMA/133 [ 1.834273] scsi 2:0:0:0: CD-ROM MATSHITA BD-CMB UJ160 1.00 PQ: 0 ANSI: 5 [ 1.836563] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.836567] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.836828] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.836899] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.910336] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.910342] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.910705] hub 2-1:1.0: USB hub found [ 1.910800] hub 2-1:1.0: 8 ports detected [ 1.929996] tsc: Refined TSC clocksource calibration: 2394.560 MHz [ 1.982155] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 2.128532] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b374 [ 2.128538] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.128541] usb 1-1.3: Product: HD WebCam [ 2.128544] usb 1-1.3: Manufacturer: SunplusIT INC. [ 2.931132] Switched to clocksource tsc [ 3.564279] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 5.567574] init: ureadahead main process (345) terminated with status 5 [ 7.330900] Adding 15625212k swap on /dev/sda5. Priority:-1 extents:1 across:15625212k FS [ 8.452500] udevd[429]: starting version 175 [ 9.517911] lp: driver loaded but no devices found [ 10.710631] wmi: Mapper loaded [ 10.744247] [drm] Initialized drm 1.1.0 20060810 [ 10.900865] cfg80211: Calling CRDA to update world regulatory domain [ 10.956537] mei_me 0000:00:16.0: setting latency timer to 64 [ 10.956570] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 10.992038] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 10.992043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.992047] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 10.992049] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251) [ 10.992051] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.992052] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 10.992054] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251) [ 10.992056] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.992057] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 11.178907] acer_wmi: Acer Laptop ACPI-WMI Extras [ 11.178916] acer_wmi: Function bitmap for Communication Button: 0x801 [ 11.179003] acer_wmi: Brightness must be controlled by acpi video driver [ 11.203985] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0 [ 11.204051] input: Acer WMI hotkeys as /devices/virtual/input/input5 [ 11.204297] input: Acer BMA150 accelerometer as /devices/virtual/input/input6 [ 11.287898] [drm] Memory usable by graphics device = 2048M [ 11.287904] i915 0000:00:02.0: setting latency timer to 64 [ 11.308973] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 11.308979] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 11.308980] [drm] Driver supports precise vblank timestamp query. [ 11.309080] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none [ 11.392272] fbcon: inteldrmfb (fb0) is primary device [ 11.478112] usb 1-1.1: new full-speed USB device number 4 using ehci-pci [ 11.571817] usb 1-1.1: string descriptor 0 read error: -22 [ 11.571823] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e [ 11.571826] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.796914] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130725/nsarguments-95) [ 11.796944] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95) [ 11.796957] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130725/nsarguments-95) [ 11.796971] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95) [ 11.797003] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95) [ 11.797093] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported [ 11.797095] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle [ 11.854877] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f01) [ 11.881192] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x18, 0x0b. [ 12.013028] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7 [ 12.220930] Bluetooth: Core ver 2.16 [ 12.220952] NET: Registered protocol family 31 [ 12.220952] Bluetooth: HCI device and connection manager initialized [ 12.220958] Bluetooth: HCI socket layer initialized [ 12.220959] Bluetooth: L2CAP socket layer initialized [ 12.220963] Bluetooth: SCO socket layer initialized [ 12.257732] cfg80211: World regulatory domain updated: [ 12.257733] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.257734] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.257735] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.257735] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.257736] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.257736] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.296619] usbcore: registered new interface driver btusb [ 12.370452] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it! [ 12.380181] ath: phy0: ASPM enabled: 0x42 [ 12.380182] ath: EEPROM regdomain: 0x6c [ 12.380182] ath: EEPROM indicates we should expect a direct regpair map [ 12.380183] ath: Country alpha2 being used: 00 [ 12.380184] ath: Regpair used: 0x6c [ 12.420139] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 12.420347] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90016f80000, irq=17 [ 12.443606] usbcore: registered new interface driver ath3k [ 12.577706] Linux video capture interface: v2.00 [ 12.718101] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b374) [ 12.727289] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8 [ 12.727423] usbcore: registered new interface driver uvcvideo [ 12.727423] USB Video Class driver (1.1.1) [ 12.835683] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 13.275683] Console: switching to colour frame buffer device 240x67 [ 13.278603] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 13.278604] i915 0000:00:02.0: registered panic notifier [ 13.278612] nouveau 0000:01:00.0: enabling device (0006 -> 0007) [ 13.278815] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 13.456524] type=1400 audit(1382984938.844:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=905 comm="apparmor_parser" [ 13.456529] type=1400 audit(1382984938.844:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=905 comm="apparmor_parser" [ 13.456532] type=1400 audit(1382984938.844:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=905 comm="apparmor_parser" [ 13.456733] type=1400 audit(1382984938.844:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=907 comm="apparmor_parser" [ 13.456739] type=1400 audit(1382984938.844:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=907 comm="apparmor_parser" [ 13.456743] type=1400 audit(1382984938.844:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=907 comm="apparmor_parser" [ 13.456749] type=1400 audit(1382984938.844:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=851 comm="apparmor_parser" [ 13.456753] type=1400 audit(1382984938.844:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=851 comm="apparmor_parser" [ 13.456757] type=1400 audit(1382984938.844:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=851 comm="apparmor_parser" [ 13.456876] type=1400 audit(1382984938.844:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=905 comm="apparmor_parser" [ 13.575923] acpi device:39: registered as cooling_device8 [ 13.576034] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 13.576072] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input9 [ 13.876301] acpi device:45: registered as cooling_device9 [ 13.876495] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.876542] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10 [ 13.876696] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 13.876879] [drm] hdmi device not found 1 0 1 [ 13.876924] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 13.877000] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7210a2 [ 13.877002] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7) [ 13.877003] nouveau [ DEVICE][0000:01:00.0] Family : NVE0 [ 13.878402] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 13.926574] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 13.926577] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 13.926631] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 13.926633] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... [ 14.009552] hda_codec: ALC269VB: SKU not ready 0x598301f0 [ 14.010156] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 14.010158] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.010159] hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 14.010159] mono: mono_out=0x0 [ 14.010160] inputs: [ 14.010161] Internal Mic=0x1b [ 14.010162] Mic=0x18 [ 14.010163] realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d [ 14.010164] realtek: Enable default setup for auto mode as fallback [ 14.036388] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 14.036446] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 14.036482] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 15.185541] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 15.185545] nouveau [ VBIOS][0000:01:00.0] using image from ACPI [ 15.185651] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 15.185653] nouveau [ VBIOS][0000:01:00.0] version 80.07.67.00.09 [ 15.186125] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised [ 15.438230] nouveau [ PFB][0000:01:00.0] RAM type: DDR3 [ 15.438232] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB [ 15.438233] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 15.463327] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 15.463332] nouveau [ PTHERM][0000:01:00.0] fan management: disabled [ 15.463335] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 15.489106] vga_switcheroo: enabled [ 15.489219] [TTM] Zone kernel: Available graphics memory: 8125082 kiB [ 15.489221] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 15.489222] [TTM] Initializing pool allocator [ 15.489225] [TTM] Initializing DMA pool allocator [ 15.489234] nouveau [ DRM] VRAM: 2048 MiB [ 15.489235] nouveau [ DRM] GART: 1048576 MiB [ 15.489238] nouveau [ DRM] TMDS table version 2.0 [ 15.489240] nouveau [ DRM] DCB version 4.0 [ 15.489255] nouveau [ DRM] ACPI backlight interface available, not registering our own [ 15.489257] nouveau W[ DRM] voltage table 0x50 unknown [ 15.489261] nouveau [ DRM] 2 available performance level(s) [ 15.489264] nouveau [ DRM] 1: core 202MHz shader 405MHz memory 405MHz voltage 490mV [ 15.489265] nouveau [ DRM] 3: core 450MHz shader 900MHz memory 1080MHz voltage 560mV [ 15.489266] nouveau [ DRM] c: [ 15.499154] nouveau [ DRM] MM: using COPY for buffer copies [ 15.499159] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1 [ 18.169301] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 19.894931] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 20.035441] init: failsafe main process (1047) killed by TERM signal [ 20.245141] usb 1-1.1: USB disconnect, device number 4 [ 20.830129] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95) [ 20.830241] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95) [ 21.127015] audit_printk_skb: 24 callbacks suppressed [ 21.127018] type=1400 audit(1382984946.508:20): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1125 comm="apparmor_parser" [ 21.127023] type=1400 audit(1382984946.508:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1125 comm="apparmor_parser" [ 21.127026] type=1400 audit(1382984946.508:22): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1125 comm="apparmor_parser" [ 21.127346] type=1400 audit(1382984946.508:23): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1125 comm="apparmor_parser" [ 21.127349] type=1400 audit(1382984946.508:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1125 comm="apparmor_parser" [ 21.127518] type=1400 audit(1382984946.508:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1125 comm="apparmor_parser" [ 21.217995] type=1400 audit(1382984946.596:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1131 comm="apparmor_parser" [ 21.250976] type=1400 audit(1382984946.632:27): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1128 comm="apparmor_parser" [ 21.250990] type=1400 audit(1382984946.632:28): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1128 comm="apparmor_parser" [ 21.251183] type=1400 audit(1382984946.632:29): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1129 comm="apparmor_parser" [ 21.852025] ppdev: user-space parallel port driver [ 22.636799] Bluetooth: RFCOMM TTY layer initialized [ 22.636811] Bluetooth: RFCOMM socket layer initialized [ 22.636812] Bluetooth: RFCOMM ver 1.11 [ 22.842712] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.842716] Bluetooth: BNEP filters: protocol multicast [ 22.842724] Bluetooth: BNEP socket layer initialized [ 26.597307] tg3 0000:02:00.0: irq 46 for MSI/MSI-X [ 26.597313] tg3 0000:02:00.0: irq 47 for MSI/MSI-X [ 26.597317] tg3 0000:02:00.0: irq 48 for MSI/MSI-X [ 26.597321] tg3 0000:02:00.0: irq 49 for MSI/MSI-X [ 26.597325] tg3 0000:02:00.0: irq 50 for MSI/MSI-X [ 27.162583] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.172630] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.661187] init: plymouth-stop pre-start process (1516) terminated with status 1 [ 33.861174] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95) [ 33.861281] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95) [ 34.958498] wlan0: authenticate with 24:65:11:52:a7:1f [ 34.973927] wlan0: send auth to 24:65:11:52:a7:1f (try 1/3) [ 34.976260] wlan0: authenticated [ 34.978086] wlan0: associate with 24:65:11:52:a7:1f (try 1/3) [ 34.981947] wlan0: RX AssocResp from 24:65:11:52:a7:1f (capab=0x431 status=0 aid=1) [ 34.982001] wlan0: associated [ 34.982011] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 51.955017] audit_printk_skb: 135 callbacks suppressed [ 51.955021] type=1400 audit(1382984977.311:75): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1165 comm="cupsd" pid=1165 comm="cupsd" capability=36 capname="block_suspend" [ 85.873756] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock [ 85.873788] mmc0: new ultra high speed SDR104 SDHC card at address aaaa [ 85.935787] mmcblk0: mmc0:aaaa SU32G 29.7 GiB [ 85.945835] mmc0: Controller never released inhibit bit(s). [ 95.957305] mmc0: Timeout waiting for hardware interrupt. [ 95.957435] mmcblk0: error -110 sending status command, retrying [ 95.958836] mmcblk0: unknown error -5 sending read/write command, card status 0x900 [ 95.958844] end_request: I/O error, dev mmcblk0, sector 0 [ 95.958847] Buffer I/O error on device mmcblk0, logical block 0 [ 95.970849] ldm_validate_partition_table(): Disk read failed. [ 95.970855] Dev mmcblk0: unable to read RDB block 0 [ 95.972162] mmcblk0: unable to read partition table [ 353.171489] type=1400 audit(1382985278.422:76): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1165 comm="cupsd" pid=1165 comm="cupsd" capability=36 capname="block_suspend" lspci -vvnn: 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: mei_me Kernel modules: mei-me 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- [disabled] Capabilities: Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: tg3 Kernel modules: tg3 02:00.1 SD Host controller [0805]: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader [14e4:16bc] (rev 10) (prog-if 01) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 02:00.2 System peripheral [0880]: Broadcom Corporation BCM57765/57785 MS Card Reader [14e4:16be] (rev 10) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 02:00.3 System peripheral [0880]: Broadcom Corporation BCM57765/57785 xD-Picture Card Reader [14e4:16bf] (rev 10) Subsystem: Acer Incorporated [ALI] Device [1025:0647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 03:00.0 Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network Adapter [168c:0034] (rev 01) Subsystem: Foxconn International, Inc. Device [105b:e052] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: ath9k Kernel modules: ath9k cat /proc/interrupts : CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 18 0 0 0 0 0 0 0 IO-APIC-edge timer 1: 1561 130 0 0 2 0 1 5 IO-APIC-edge i8042 8: 0 0 0 0 1 0 0 0 IO-APIC-edge rtc0 9: 48 26 0 0 8 2 3 11 IO-APIC-fasteoi acpi 12: 162438 15 3899 101982 1371 38382 113 5598 IO-APIC-edge i8042 16: 227 23 18 11 9 4 5 4 IO-APIC-fasteoi ehci_hcd:usb1, nouveau 17: 40145 6 4 1 3 36 3 5 IO-APIC-fasteoi mmc0, ath9k 23: 916 41 2 3 2 4 3 2 IO-APIC-fasteoi ehci_hcd:usb2 41: 26 8 0 0 0 2 0 1 PCI-MSI-edge xhci_hcd 42: 41329 2261 408 172 102 552 58 51 PCI-MSI-edge ahci 43: 9 0 0 4 0 0 0 0 PCI-MSI-edge mei_me 44: 104472 6088 5279 73813 0 0 1 0 PCI-MSI-edge i915 45: 113 196 0 96 0 1 0 0 PCI-MSI-edge snd_hda_intel 46: 0 0 0 1 0 0 0 0 PCI-MSI-edge eth0-0 47: 1 0 0 0 0 0 0 0 PCI-MSI-edge eth0-1 48: 0 0 0 1 0 0 0 0 PCI-MSI-edge eth0-2 49: 0 0 0 0 0 0 0 1 PCI-MSI-edge eth0-3 50: 0 0 0 1 0 0 0 0 PCI-MSI-edge eth0-4 NMI: 9 2 6 4 6 2 5 1 Non-maskable interrupts LOC: 116423 29723 69191 25194 76262 17622 87281 21445 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 9 2 6 4 6 2 5 1 Performance monitoring interrupts IWI: 6829 2214 4764 1947 4398 2429 4575 2227 IRQ work interrupts RTR: 5 0 0 0 0 0 0 0 APIC ICR read retries RES: 368357 118102 316951 214858 306551 252018 311955 118278 Rescheduling interrupts CAL: 573 1210 1245 1292 1233 1331 1335 1301 Function call interrupts TLB: 7088 5527 6469 6414 6502 6019 5735 6023 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 9 9 9 9 9 9 9 9 Machine check polls ERR: 0 MIS: 0 dmidecode: # dmidecode 2.11 SMBIOS 2.7 present. 39 structures occupying 2027 bytes. Table at 0x000E6DF0. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Insyde Corp. Version: V2.15 Release Date: 03/11/2013 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 3584 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported Japanese floppy for NEC 9800 1.2 MB is supported (int 13h) Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) 8042 keyboard services are supported (int 9h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 2.15 Firmware Revision: 0.0 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Acer Product Name: Aspire V3-571G Version: V2.15 Serial Number: NXM6AEG005303040323400 UUID: 6D20CE11-1556-E211-84CF-B888E3B4D014 Wake-up Type: Power Switch SKU Number: Aspire V3-571G_0648_V2.15 Family: Type1Family Handle 0x0002, DMI type 2, 16 bytes Base Board Information Manufacturer: Acer Product Name: VA50_HC_CR Version: Type2 - Board Version Serial Number: NBM6A1100130334B713400 Asset Tag: Type2 - Board Asset Tag Features: Board is a hosting board Board is replaceable Location In Chassis: Type2 - Board Chassis Location Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 23 bytes Chassis Information Manufacturer: Insyde Corp. Type: Notebook Lock: Not Present Version: V2.15 Serial Number: NXM6AEG005303040323400 Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 SKU Number: Not Specified Handle 0x0004, DMI type 4, 42 bytes Processor Information Socket Designation: U3E1 Type: Central Processor Family: Core i7 Manufacturer: Intel(R) Corporation ID: A9 06 03 00 FF FB EB BF Signature: Type 0, Family 6, Model 58, Stepping 9 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz Voltage: 0.9 V External Clock: 100 MHz Max Speed: 4000 MHz Current Speed: 2400 MHz Status: Populated, Enabled Upgrade: Socket rPGA988B L1 Cache Handle: 0x000B L2 Cache Handle: 0x000C L3 Cache Handle: 0x000D Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 4 Core Enabled: 4 Thread Count: 8 Characteristics: 64-bit capable Multi-Core Hardware Thread Execute Protection Enhanced Virtualization Power/Performance Control Handle 0x0005, DMI type 5, 24 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 8192 MB Maximum Total Memory Size: 32768 MB Supported Speeds: Other Supported Memory Types: Other Memory Module Voltage: Unknown Associated Memory Slots: 4 0x0006 0x0007 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM0 Bank Connections: None Current Speed: Unknown Type: DIMM Installed Size: 8192 MB (Single-bank Connection) Enabled Size: 8192 MB (Single-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM1 Bank Connections: None Current Speed: Unknown Type: DIMM Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM1 Bank Connections: None Current Speed: Unknown Type: DIMM Installed Size: 8192 MB (Single-bank Connection) Enabled Size: 8192 MB (Single-bank Connection) Error Status: OK Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM3 Bank Connections: None Current Speed: Unknown Type: DIMM Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x000A, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Through Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Parity System Type: Data Associativity: 8-way Set-associative Handle 0x000B, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Through Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Parity System Type: Instruction Associativity: 8-way Set-associative Handle 0x000C, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Through Location: Internal Installed Size: 256 kB Maximum Size: 256 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x000D, DMI type 7, 19 bytes Cache Information Socket Designation: L3 Cache Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Write Back Location: Internal Installed Size: 6144 kB Maximum Size: 6144 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 12-way Set-associative Handle 0x000E, DMI type 9, 17 bytes System Slot Information Designation: J5C1 Type: x16 PCI Express x16 Current Usage: Available Length: Other ID: 1 Characteristics: PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:01.0 Handle 0x000F, DMI type 9, 17 bytes System Slot Information Designation: J6C1 Type: x1 PCI Express x1 Current Usage: Available Length: Other ID: 2 Characteristics: PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1c.0 Handle 0x0010, DMI type 9, 17 bytes System Slot Information Designation: J6C2 Type: x1 PCI Express x1 Current Usage: Available Length: Other ID: 3 Characteristics: PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1c.1 Handle 0x0011, DMI type 9, 17 bytes System Slot Information Designation: J6D2 Type: x1 PCI Express x1 Current Usage: Available Length: Other ID: 4 Characteristics: PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1c.2 Handle 0x0012, DMI type 9, 17 bytes System Slot Information Designation: J7C1 Type: x1 PCI Express x1 Current Usage: Available Length: Other ID: 5 Characteristics: PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1c.3 Handle 0x0013, DMI type 9, 17 bytes System Slot Information Designation: J7D2 Type: x1 PCI Express x1 Current Usage: Available Length: Other ID: 6 Characteristics: PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1c.4 Handle 0x0014, DMI type 9, 17 bytes System Slot Information Designation: J8C1 Type: x1 PCI Express x1 Current Usage: Available Length: Other ID: 7 Characteristics: PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1c.5 Handle 0x0015, DMI type 9, 17 bytes System Slot Information Designation: J8C2 Type: x16 PCI Express x16 Current Usage: Available Length: Other ID: 8 Characteristics: PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1c.7 Handle 0x0016, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Enabled Description: Video Graphics Controller Handle 0x0017, DMI type 10, 6 bytes On Board Device Information Type: Ethernet Status: Enabled Description: Lan Controller Handle 0x0018, DMI type 11, 5 bytes OEM Strings String 1: String1 for Original Equipment Manufacturer String 2: String2 for Original Equipment Manufacturer String 3: String3 for Original Equipment Manufacturer String 4: String4 for Original Equipment Manufacturer String 5: String5 for Original Equipment Manufacturer Handle 0x0019, DMI type 12, 5 bytes System Configuration Options Option 1: Option 2: String2 for Type12 Equipment Manufacturer Option 3: String3 for Type12 Equipment Manufacturer Option 4: String4 for Type12 Equipment Manufacturer Handle 0x001A, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x001B, DMI type 17, 34 bytes Memory Device Array Handle: 0x001A Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: SODIMM Set: None Locator: DIMM0 Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Speed: 1600 MHz Manufacturer: Kingston Serial Number: C00221BF Asset Tag: Unknown Part Number: ACR16D3LS1KBG/8G Rank: 2 Configured Clock Speed: 1600 MHz Handle 0x001C, DMI type 17, 34 bytes Memory Device Array Handle: 0x001A Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK 1 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Empty Serial Number: Empty Asset Tag: Unknown Part Number: Empty Rank: Unknown Configured Clock Speed: Unknown Handle 0x001D, DMI type 17, 34 bytes Memory Device Array Handle: 0x001A Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: SODIMM Set: None Locator: DIMM1 Bank Locator: BANK 2 Type: DDR3 Type Detail: Synchronous Speed: 1600 MHz Manufacturer: Kingston Serial Number: C5026493 Asset Tag: Unknown Part Number: ACR16D3LS1KBG/8G Rank: 2 Configured Clock Speed: 1600 MHz Handle 0x001E, DMI type 17, 34 bytes Memory Device Array Handle: 0x001A Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM3 Bank Locator: BANK 3 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Empty Serial Number: Empty Asset Tag: Unknown Part Number: Empty Rank: Unknown Configured Clock Speed: Unknown Handle 0x001F, DMI type 19, 31 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x003FFFFFFFF Range Size: 16 GB Physical Array Handle: 0x001A Partition Width: 4 Handle 0x0020, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x001FFFFFFFF Range Size: 8 GB Physical Device Handle: 0x001B Memory Array Mapped Address Handle: 0x001F Partition Row Position: Unknown Interleave Position: 1 Interleaved Data Depth: 1 Handle 0x0021, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x001FFFFFFFF Range Size: 8 GB Physical Device Handle: 0x001D Memory Array Mapped Address Handle: 0x001F Partition Row Position: Unknown Interleave Position: 2 Interleaved Data Depth: 1 Handle 0x0022, DMI type 170, 82 bytes OEM-specific Type Header and Data: AA 52 22 00 01 08 29 00 7F 00 0F 00 06 00 03 02 01 08 21 02 00 00 23 02 00 00 25 02 00 00 41 02 04 00 48 02 01 00 49 02 02 00 42 02 20 00 43 02 40 00 44 02 08 00 45 02 10 00 61 02 08 00 64 02 04 00 62 02 01 00 63 02 02 00 81 02 04 00 83 02 02 00 Handle 0x0023, DMI type 171, 39 bytes OEM-specific Type Header and Data: AB 27 23 00 01 86 80 66 01 01 DE 10 E1 0F 02 E4 14 B5 16 04 F2 04 74 B3 05 86 80 20 1E 07 8C 16 34 00 08 89 04 4E E0 Handle 0x0024, DMI type 172, 21 bytes OEM-specific Type Header and Data: AC 15 24 00 02 13 01 FF 00 02 03 00 03 FF 00 04 01 00 05 0F 00 Handle 0x0025, DMI type 173, 9 bytes OEM-specific Type Header and Data: AD 09 25 00 00 00 00 00 00 Handle 0x0026, DMI type 127, 4 bytes End Of Table