[ 0.000000] Linux version 2.6.20 (rddunlap@unicorn) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #3 SMP Wed Mar 7 08:12:23 PST 2007 [ 0.000000] Command line: auto BOOT_IMAGE=lin2620 ro root=308 resume=/dev/hda2 splash=silent showopts psmouse.proto=imps console=ttyS0,115200n8 console=tty0 debug [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 262080) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f87c0 [ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x09000528 MSFT 0x00000097) @ 0x000000003ffc0000 [ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x09000528 MSFT 0x00000097) @ 0x000000003ffc0200 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x09000528 MSFT 0x00000097) @ 0x000000003ffc0390 [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x09000528 MSFT 0x00000097) @ 0x000000003ffc0400 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x09000528 MSFT 0x00000097) @ 0x000000003ffce040 [ 0.000000] ACPI: DSDT (v001 12345 12345123 0x00000123 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 262080) 1 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 262080 [ 0.000000] On node 0 totalpages: 261983 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1501 pages reserved [ 0.000000] DMA zone: 2434 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4031 pages used for memmap [ 0.000000] DMA32 zone: 253953 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e8000 [ 0.000000] Nosave address range: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 35200 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 256387 [ 0.000000] Kernel command line: auto BOOT_IMAGE=lin2620 ro root=308 resume=/dev/hda2 splash=silent showopts psmouse.proto=imps console=ttyS0,115200n8 console=tty0 debug [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 16.625803] Console: colour dummy device 80x25 [ 17.042727] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.050607] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 17.066603] Memory: 1023752k/1048320k available (3301k kernel code, 24088k reserved, 1738k data, 220k init) [ 17.155296] Calibrating delay using timer specific routine.. 4405.41 BogoMIPS (lpj=8810838) [ 17.163719] Mount-cache hash table entries: 256 [ 17.168353] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.175483] CPU: L2 Cache: 512K (64 bytes/line) [ 17.180029] SMP alternatives: switching to UP code [ 17.184968] ACPI: Core revision 20060707 [ 17.232179] Using local APIC timer interrupts. [ 17.282033] result 12500819 [ 17.284824] Detected 12.500 MHz APIC timer. [ 17.291228] Brought up 1 CPUs [ 17.294387] testing NMI watchdog ... OK. [ 17.338344] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 17.344516] time.c: Detected 2200.144 MHz processor. [ 17.349733] NET: Registered protocol family 16 [ 17.354238] No dock devices found. [ 17.357701] ACPI: bus type pci registered [ 17.364369] PCI: Using MMCONFIG at e0000000 [ 17.368586] PCI: No mmconfig possible on device 00:18 [ 17.380875] ACPI: Interpreter enabled [ 17.384546] ACPI: Using IOAPIC for interrupt routing [ 17.390149] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.394938] PCI: Probing PCI hardware (bus 00) [ 17.400200] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON [ 17.406307] PCI: MSI-K8T-Neo2Fir, soundcard on [ 17.411026] Boot video device is 0000:02:00.0 [ 17.415783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.441632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 17.448106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] [ 17.454583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] [ 17.461059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT] [ 17.467532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT] [ 17.473990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT] [ 17.488742] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 17.496239] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 17.503725] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 17.511176] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.519855] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.528480] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.537097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.545718] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 17.553190] SCSI subsystem initialized [ 17.557005] usbcore: registered new interface driver usbfs [ 17.562515] usbcore: registered new interface driver hub [ 17.567856] usbcore: registered new device driver usb [ 17.572959] PCI: Using ACPI for IRQ routing [ 17.577146] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.585526] agpgart: Detected AGP bridge 0 [ 17.592220] agpgart: AGP aperture is 64M @ 0xcc000000 [ 17.598381] PCI: Bridge: 0000:00:01.0 [ 17.602049] IO window: disabled. [ 17.605449] MEM window: disabled. [ 17.608940] PREFETCH window: disabled. [ 17.612862] PCI: Bridge: 0000:00:02.0 [ 17.616526] IO window: c000-cfff [ 17.619928] MEM window: fea00000-feafffff [ 17.624108] PREFETCH window: b7f00000-c7efffff [ 17.628724] PCI: Bridge: 0000:00:03.0 [ 17.632385] IO window: disabled. [ 17.635788] MEM window: disabled. [ 17.639279] PREFETCH window: disabled. [ 17.643199] PCI: Bridge: 0000:00:03.1 [ 17.646862] IO window: disabled. [ 17.650265] MEM window: disabled. [ 17.653755] PREFETCH window: disabled. [ 17.657678] PCI: Bridge: 0000:00:03.2 [ 17.661340] IO window: disabled. [ 17.664744] MEM window: disabled. [ 17.668232] PREFETCH window: disabled. [ 17.672155] PCI: Bridge: 0000:00:03.3 [ 17.675817] IO window: disabled. [ 17.679219] MEM window: disabled. [ 17.682708] PREFETCH window: disabled. [ 17.686641] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 17.692913] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 [ 17.700322] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 17.706591] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 [ 17.714002] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 17.720339] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 31 (level, low) -> IRQ 31 [ 17.727752] PCI: Setting latency timer of device 0000:00:03.1 to 64 [ 17.734021] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39 [ 17.741433] PCI: Setting latency timer of device 0000:00:03.2 to 64 [ 17.747701] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 31 (level, low) -> IRQ 31 [ 17.755113] PCI: Setting latency timer of device 0000:00:03.3 to 64 [ 17.761394] NET: Registered protocol family 2 [ 17.802754] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 17.810102] TCP established hash table entries: 131072 (order: 10, 4194304 bytes) [ 17.819336] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 17.826933] TCP: Hash tables configured (established 131072 bind 65536) [ 17.833542] TCP reno registered [ 17.847135] microcode: CPU0 not a capable Intel processor [ 17.852533] IA-32 Microcode Update Driver: v1.14a [ 17.860181] audit: initializing netlink socket (disabled) [ 17.865587] audit(1173478321.700:1): initialized [ 17.870259] Total HugeTLB memory allocated, 0 [ 17.874791] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 17.881307] io scheduler noop registered [ 17.885248] io scheduler anticipatory registered [ 17.889880] io scheduler deadline registered [ 17.894172] io scheduler cfq registered (default) [ 17.899175] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 17.905467] assign_interrupt_mode Found MSI capability [ 17.910642] Allocate Port Service[0000:00:02.0:pcie00] [ 17.915819] Allocate Port Service[0000:00:02.0:pcie01] [ 17.920981] Allocate Port Service[0000:00:02.0:pcie02] [ 17.926150] Allocate Port Service[0000:00:02.0:pcie03] [ 17.931381] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 17.937675] assign_interrupt_mode Found MSI capability [ 17.942842] Allocate Port Service[0000:00:03.0:pcie00] [ 17.947998] Allocate Port Service[0000:00:03.0:pcie01] [ 17.953160] Allocate Port Service[0000:00:03.0:pcie02] [ 17.958322] Allocate Port Service[0000:00:03.0:pcie03] [ 17.963453] Losing some ticks... checking if CPU frequency changed. [ 17.969801] PCI: Setting latency timer of device 0000:00:03.1 to 64 [ 17.976092] assign_interrupt_mode Found MSI capability [ 17.981258] Allocate Port Service[0000:00:03.1:pcie00] [ 17.986415] Allocate Port Service[0000:00:03.1:pcie01] [ 17.991576] Allocate Port Service[0000:00:03.1:pcie02] [ 17.996739] Allocate Port Service[0000:00:03.1:pcie03] [ 18.001954] PCI: Setting latency timer of device 0000:00:03.2 to 64 [ 18.008243] assign_interrupt_mode Found MSI capability [ 18.013407] Allocate Port Service[0000:00:03.2:pcie00] [ 18.018568] Allocate Port Service[0000:00:03.2:pcie01] [ 18.023727] Allocate Port Service[0000:00:03.2:pcie02] [ 18.028888] Allocate Port Service[0000:00:03.2:pcie03] [ 18.034106] PCI: Setting latency timer of device 0000:00:03.3 to 64 [ 18.040399] assign_interrupt_mode Found MSI capability [ 18.045565] Allocate Port Service[0000:00:03.3:pcie00] [ 18.050722] Allocate Port Service[0000:00:03.3:pcie01] [ 18.055886] Allocate Port Service[0000:00:03.3:pcie02] [ 18.061045] Allocate Port Service[0000:00:03.3:pcie03] [ 18.066312] Evaluate _OSC Set fails. Status = 0x0005 [ 18.071273] Evaluate _OSC Set fails. Status = 0x0005 [ 18.076230] aer_init: AER service init fails - Run ACPI _OSC fails [ 18.082406] aer: probe of 0000:00:02.0:pcie01 failed with error 2 [ 18.088499] Evaluate _OSC Set fails. Status = 0x0005 [ 18.093463] Evaluate _OSC Set fails. Status = 0x0005 [ 18.098422] aer_init: AER service init fails - Run ACPI _OSC fails [ 18.104599] aer: probe of 0000:00:03.0:pcie01 failed with error 2 [ 18.110690] Evaluate _OSC Set fails. Status = 0x0005 [ 18.115655] Evaluate _OSC Set fails. Status = 0x0005 [ 18.120613] aer_init: AER service init fails - Run ACPI _OSC fails [ 18.126788] aer: probe of 0000:00:03.1:pcie01 failed with error 2 [ 18.132881] Evaluate _OSC Set fails. Status = 0x0005 [ 18.137845] Evaluate _OSC Set fails. Status = 0x0005 [ 18.142806] aer_init: AER service init fails - Run ACPI _OSC fails [ 18.148979] aer: probe of 0000:00:03.2:pcie01 failed with error 2 [ 18.155074] Evaluate _OSC Set fails. Status = 0x0005 [ 18.160038] Evaluate _OSC Set fails. Status = 0x0005 [ 18.164996] aer_init: AER service init fails - Run ACPI _OSC fails [ 18.171172] aer: probe of 0000:00:03.3:pcie01 failed with error 2 [ 18.177348] vesafb: framebuffer at 0xb8000000, mapped to 0xffffc20010100000, using 3072k, total 16384k [ 18.186644] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 18.192732] vesafb: scrolling: redraw [ 18.196394] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 18.215096] Console: switching to colour frame buffer device 128x48 [ 18.234516] fb0: VESA VGA frame buffer device [ 18.239067] input: Power Button (FF) as /class/input/input0 [ 18.244768] ACPI: Power Button (FF) [PWRF] [ 18.249027] input: Sleep Button (CM) as /class/input/input1 [ 18.254730] ACPI: Sleep Button (CM) [SLPB] [ 18.258986] input: Power Button (CM) as /class/input/input2 [ 18.264685] ACPI: Power Button (CM) [PWRB] [ 18.268949] Using specific hotkey driver [ 18.273054] ACPI: Processor [CPU1] (supports 16 throttling states) [ 18.279430] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 18.300741] Real Time Clock Driver v1.12ac [ 18.305025] Non-volatile memory driver v1.2 [ 18.309377] ppdev: user-space parallel port driver [ 18.314331] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) [ 18.323780] Linux agpgart interface v0.101 (c) Dave Jones [ 18.329329] [drm] Initialized drm 1.1.0 20060810 [ 18.334076] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 18.343254] Hangcheck: Using monotonic_clock(). [ 18.347940] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 18.356080] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.362656] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] [ 18.504893] parport0: irq 7 detected [ 21.627214] floppy0: no floppy controllers found [ 21.635611] RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize [ 21.646717] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2 [ 21.656313] Copyright (c) 1999-2006 Intel Corporation. [ 21.665173] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI [ 21.675082] e100: Copyright(c) 1999-2006 Intel Corporation [ 21.684574] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker [ 21.695629] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 21.711269] eth0: VIA Rhine II at 0xfebdf800, 00:14:2a:c9:24:d3, IRQ 23. [ 21.723176] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 21.735815] tun: Universal TUN/TAP device driver, 1.6 [ 21.745485] tun: (C) 1999-2004 Max Krasnyansky [ 21.756445] netconsole: not configured, aborting [ 21.765900] Linux video capture interface: v2.00 [ 21.775447] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 21.786881] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 21.800258] Probing IDE interface ide0... [ 22.234817] hda: MAXTOR STM3200820A, ATA DISK drive [ 22.918028] Probing IDE interface ide1... [ 23.801384] hdc: TSSTcorpCD/DVDW SH-W162C, ATAPI CD/DVD-ROM drive [ 24.484614] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 24.494978] ide1 at 0x170-0x177,0x376 on irq 15 [ 24.505445] hda: max request size: 512KiB [ 24.563921] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63 [ 24.588310] hda: cache flushes supported [ 24.598266] hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > [ 24.687806] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 24.700391] Uniform CD-ROM driver Revision: 3.20 [ 24.713868] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 24.727433] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 24.738829] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 24.752420] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebdfc00 [ 24.764188] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.777948] usb usb1: configuration #1 chosen from 1 choice [ 24.789715] hub 1-0:1.0: USB hub found [ 24.799504] hub 1-0:1.0: 8 ports detected [ 24.916276] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 24.930378] USB Universal Host Controller Interface driver v3.0 [ 24.942435] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 24.955952] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 24.967204] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 24.980651] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ec00 [ 24.992425] usb usb2: configuration #1 chosen from 1 choice [ 25.003915] hub 2-0:1.0: USB hub found [ 25.013455] hub 2-0:1.0: 2 ports detected [ 25.128084] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 25.141294] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 25.152339] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 25.165592] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800 [ 25.177198] usb usb3: configuration #1 chosen from 1 choice [ 25.188492] usb 1-7: new high speed USB device using ehci_hcd and address 2 [ 25.201209] hub 3-0:1.0: USB hub found [ 25.210651] hub 3-0:1.0: 2 ports detected [ 25.327910] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 25.341036] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 25.351957] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 25.365024] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400 [ 25.376458] usb usb4: configuration #1 chosen from 1 choice [ 25.387576] hub 4-0:1.0: USB hub found [ 25.396793] hub 4-0:1.0: 2 ports detected [ 25.408507] usb 1-7: configuration #1 chosen from 1 choice [ 25.511741] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 25.524658] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 25.535349] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 25.548173] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e000 [ 25.559414] usb usb5: configuration #1 chosen from 1 choice [ 25.570418] hub 5-0:1.0: USB hub found [ 25.579500] hub 5-0:1.0: 2 ports detected [ 26.466780] usbcore: registered new interface driver libusual [ 26.477948] usbcore: registered new interface driver hiddev [ 26.488871] usbcore: registered new interface driver usbhid [ 26.499647] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 26.511293] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.521474] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.531777] mice: PS/2 mouse device common for all mice [ 26.561548] input: AT Translated Set 2 keyboard as /class/input/input3 [ 26.578611] input: PC Speaker as /class/input/input4 [ 26.706565] input: ImPS/2 Generic Wheel Mouse as /class/input/input5 [ 26.721765] i2c /dev entries driver [ 26.730352] IPv4 over IPv4 tunneling driver [ 26.739627] GRE over IPv4 tunneling driver [ 26.748761] TCP cubic registered [ 26.756905] NET: Registered protocol family 1 [ 26.766233] NET: Registered protocol family 17 [ 26.775498] NET: Registered protocol family 15 [ 26.784648] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 26.795966] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 26.809068] ieee80211_crypt: registered algorithm 'NULL' [ 26.819121] ieee80211_crypt: registered algorithm 'WEP' [ 26.829008] ieee80211_crypt: registered algorithm 'CCMP' [ 26.838941] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version 2.00.00) [ 26.852401] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 [ 26.862743] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8 [ 26.872959] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa [ 26.883054] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 26.914061] ACPI: (supports S0 S1 S3 S4 S5) [ 26.922861] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 26.969867] kjournald starting. Commit interval 5 seconds [ 26.979812] EXT3-fs: mounted filesystem with ordered data mode. [ 26.990207] VFS: Mounted root (ext3 filesystem) readonly. [ 27.000148] Freeing unused kernel memory: 220k freed [ 27.009712] Write protecting the kernel read-only data: 1280k [ 30.213967] lp0: using parport0 (polling). [ 30.222260] lp0: console ready [ 32.549621] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 [ 32.561496] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 33.758529] Adding 2097136k swap on /dev/hda2. Priority:-1 extents:1 across:2097136k [ 33.855596] EXT3 (no)acl options not supported [ 34.548706] EXT3 (no)acl options not supported [ 34.559391] EXT3 FS on hda8, internal journal [ 37.661383] loop: loaded (max 8 devices) [ 37.689064] EXT3 (no)acl options not supported [ 37.748413] kjournald starting. Commit interval 5 seconds [ 37.774325] EXT3 FS on hda1, internal journal [ 37.783576] EXT3-fs: mounted filesystem with ordered data mode. [ 37.816060] EXT3 (no)acl options not supported [ 37.844840] kjournald starting. Commit interval 5 seconds [ 37.865669] EXT3 FS on hda5, internal journal [ 37.874759] EXT3-fs: mounted filesystem with ordered data mode. [ 37.904615] EXT3 (no)acl options not supported [ 37.933765] kjournald starting. Commit interval 5 seconds [ 37.953654] EXT3 FS on hda6, internal journal [ 37.962765] EXT3-fs: mounted filesystem with ordered data mode. [ 55.260171] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1