[  611.641264] PM: Syncing filesystems ... done.
[  611.658946] PM: Preparing system for mem sleep
[  611.659256] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  611.670501] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  611.681551] PM: Entering mem sleep
[  611.681597] Suspending console(s) (use no_console_suspend to debug)
[  611.849169] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  611.849429] sd 0:0:0:0: [sda] Stopping disk
[  612.140294] i915 0000:00:02.0: power state changed by ACPI to D3hot
[  612.203326] PM: suspend of devices complete after 521.810 msecs
[  612.203430] PM: late suspend of devices complete after 0.102 msecs
[  612.214334] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  612.225174] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3hot
[  612.225483] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[  612.236166] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3hot
[  612.247270] PM: noirq suspend of devices complete after 43.850 msecs
[  612.247941] ACPI: Preparing to enter system sleep state S3
[  612.252329] PM: Saving platform NVS memory
[  612.254660] Disabling non-boot CPUs ...
[  612.255837] smpboot: CPU 1 is now offline
[  612.257396] smpboot: CPU 2 is now offline
[  612.258717] smpboot: CPU 3 is now offline
[  612.259719] ACPI: Low-level resume complete
[  612.259756] PM: Restoring platform NVS memory
[  612.260608] Enabling non-boot CPUs ...
[  612.260640] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  612.270962] Initializing CPU#1
[  612.271759] Disabled fast string operations
[  612.273985] CPU1 is up
[  612.274003] smpboot: Booting Node 0 Processor 2 APIC 0x2
[  612.284315] Initializing CPU#2
[  612.285120] Disabled fast string operations
[  612.287329] CPU2 is up
[  612.287344] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  612.297656] Initializing CPU#3
[  612.298461] Disabled fast string operations
[  612.300707] CPU3 is up
[  612.303443] ACPI: Waking up from system sleep state S3
[  612.826593] i915 0000:00:02.0: power state changed by ACPI to D0
[  612.858723] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[  612.869720] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[  612.881037] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[  612.891711] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  612.924803] PM: noirq resume of devices complete after 98.323 msecs
[  612.924883] PM: early resume of devices complete after 0.060 msecs
[  612.924907] i915 0000:00:02.0: setting latency timer to 64
[  612.924923] e1000e 0000:00:19.0: setting latency timer to 64
[  612.924950] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[  612.924991] ahci 0000:00:1f.2: setting latency timer to 64
[  612.925003] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[  612.925078] ehci-pci 0000:00:1a.0: setting latency timer to 64
[  612.925305] ehci-pci 0000:00:1d.0: setting latency timer to 64
[  612.937171] [drm] Wrong MCH_SSKPD value: 0x16040307
[  612.937172] [drm] This can cause pipe underruns and display issues.
[  612.937172] [drm] Please upgrade your BIOS to fix this.
[  613.131760] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
[  613.232592] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  613.232632] ata5: SATA link down (SStatus 0 SControl 300)
[  613.234612] ata4: SATA link down (SStatus 0 SControl 300)
[  613.236142] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[  613.236462] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[  613.236468] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[  613.243078] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[  613.243322] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[  613.243328] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[  613.245999] ata2.00: configured for UDMA/33
[  613.289707] usb 2-1.5: reset full-speed USB device number 4 using ehci-pci
[  613.447682] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[  614.653177] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[  614.815314] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
[  615.123001] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  615.124468] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[  615.124475] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[  615.124479] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[  615.127032] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[  615.127039] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[  615.127043] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[  615.128082] ata1.00: configured for UDMA/100
[  615.139081] sd 0:0:0:0: [sda] Starting disk
[  615.162458] PM: resume of devices complete after 2238.303 msecs
[  615.162559] PM: Finishing wakeup.
[  615.162560] Restarting tasks ... done.
[  615.167653] video LNXVIDEO:00: Restoring backlight state