Most recent kernel where this bug did not occur: $ cat /proc/version Linux version 2.6.23-rc5-amd64 (Debian 2.6.23~rc5-1~experimental.1~snapshot.9529) (waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14+1)) #1 SMP Mon Sep 17 01:12:09 UTC 2007 $ sh /usr/src/linux-kbuild-2.6.22/scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux ile 2.6.23-rc5-amd64 #1 SMP Mon Sep 17 01:12:09 UTC 2007 x86_64 GNU/Linux Gnu C 4.2.1 Gnu make 3.81 binutils Binutils util-linux 2.13 mount 2.13 module-init-tools 3.3-pre11 e2fsprogs 1.40.2 Linux C Library 2.6.1 Dynamic linker (ldd) 2.6.1 Procps 3.2.7 Net-tools 1.60 Kbd 1.12 Sh-utils 5.97 udev 114 Modules Loaded xt_multiport binfmt_misc ipt_ULOG ac battery ipv6 cpufreq_stats cpufreq_conservative cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table ipt_REJECT xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nfnetlink iptable_filter ip_tables x_tables fuse it87 hwmon_vid firewire_sbp2 loop snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd k8temp serio_raw button psmouse soundcore snd_page_alloc i2c_nforce2 i2c_core pcspkr evdev joydev tsdev ext3 jbd mbcache dm_mirror dm_snapshot dm_mod sg sr_mod cdrom sd_mod amd74xx usbhid hid firewire_ohci jmicron generic sata_nv ehci_hcd firewire_core crc_itu_t forcedeth ahci ohci_hcd ide_core ata_generic libata scsi_mod thermal processor fan Distribution: $ lsb_release -a LSB Version: core-2.0-noarch:core-3.0-noarch:core-3.1-noarch:core-2.0-amd64:core-3.0-amd64:core-3.1-amd64:desktop-3.1-noarch:desktop-3.1-amd64:graphics-2.0-noarch:graphics-3.0-noarch:graphics-3.1-noarch:graphics-2.0-amd64:graphics-3.0-amd64:graphics-3.1-amd64 Distributor ID: Debian Description: Debian GNU/Linux unstable (sid) Release: unstable Codename: sid Hardware Environment: $ sudo lspci -vvv 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 8222 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 1.0GHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 800MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 8222 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 8222 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 8222 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 8222 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [44] #00 [00fe] Capabilities: [fc] #00 [0000] 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 8222 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 8222 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dfe00000-dfefffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 4149 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 4151 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 4159 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2) (prog-if 00 [VGA]) Subsystem: ASUSTeK Computer Inc. Unknown device 8222 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 0 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at dd000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at dfde0000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 81bc Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) Subsystem: ASUSTeK Computer Inc. Unknown device 81bc Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) Subsystem: ASUSTeK Computer Inc. Unknown device 81bc Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 0600 [size=64] Region 5: I/O ports at 0700 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 81bc Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at dfdde000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 81bc Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 15 Region 0: Memory at dfddfc00 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Unknown device 81bc Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device 81bc Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 7 Region 0: I/O ports at c800 [size=8] Region 1: I/O ports at c480 [size=4] Region 2: I/O ports at c400 [size=8] Region 3: I/O ports at c080 [size=4] Region 4: I/O ports at c000 [size=16] Region 5: Memory at dfddd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device 81bc Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at bc00 [size=8] Region 1: I/O ports at b880 [size=4] Region 2: I/O ports at b800 [size=8] Region 3: I/O ports at b480 [size=4] Region 4: I/O ports at b400 [size=16] Region 5: Memory at dfddc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dff00000-dfffffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [b8] Subsystem: Gammagraphx, Inc. Unknown device 0000 Capabilities: [8c] HyperTransport: MSI Mapping 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 821f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 10 Region 0: Memory at dfdd4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) Subsystem: ASUSTeK Computer Inc. Unknown device 81bc Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 15 Region 0: Memory at dfdd3000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at b080 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [f0] #0f [0010] 01:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Unknown device 81e4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 5: Memory at dfefe000 (32-bit, non-prefetchable) [size=8K] Expansion ROM at dfee0000 [disabled] [size=64K] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Express Legacy Endpoint IRQ 1 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 1 Link: Latency L0s <1us, L1 <16us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 01:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device 81e4 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 04:05.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 2a22 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at dffff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at ec00 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- $ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping : 1 cpu MHz : 2210.076 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy misalignsse bogomips : 4424.05 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping : 1 cpu MHz : 2210.076 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy misalignsse bogomips : 4420.51 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps $ cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:0d.0 01f0-01f7 : 0000:00:0d.0 0376-0376 : 0000:00:0d.0 03c0-03df : vesafb 03f6-03f6 : 0000:00:0d.0 03f8-03ff : serial 0500-0503 : ACPI PM1a_EVT_BLK 0504-0505 : ACPI PM1a_CNT_BLK 0508-050b : ACPI PM_TMR 0520-0527 : ACPI GPE0_BLK 0600-063f : 0000:00:0a.1 0600-063f : nForce2_smbus 0700-073f : 0000:00:0a.1 0700-073f : nForce2_smbus 08a0-08af : ACPI GPE1_BLK 0a00-0a0f : pnp 00:0b 0a10-0a1f : pnp 00:0b 0a10-0a17 : it87 0a10-0a17 : it87 0a20-0a2f : pnp 00:0b 0a30-0a3f : pnp 00:0b 0cf8-0cff : PCI conf1 b080-b087 : 0000:00:14.0 b080-b087 : forcedeth b400-b40f : 0000:00:0f.0 b400-b40f : libata b480-b483 : 0000:00:0f.0 b480-b483 : libata b800-b807 : 0000:00:0f.0 b800-b807 : libata b880-b883 : 0000:00:0f.0 b880-b883 : libata bc00-bc07 : 0000:00:0f.0 bc00-bc07 : libata c000-c00f : 0000:00:0e.0 c000-c00f : libata c080-c083 : 0000:00:0e.0 c080-c083 : libata c400-c407 : 0000:00:0e.0 c400-c407 : libata c480-c483 : 0000:00:0e.0 c480-c483 : libata c800-c807 : 0000:00:0e.0 c800-c807 : libata d000-dfff : PCI Bus #01 d400-d40f : 0000:01:00.1 d400-d407 : ide0 d408-d40f : ide1 d480-d483 : 0000:01:00.1 d800-d807 : 0000:01:00.1 d880-d883 : 0000:01:00.1 dc00-dc07 : 0000:01:00.1 e000-efff : PCI Bus #04 ec00-ec7f : 0000:04:05.0 ffa0-ffaf : 0000:00:0d.0 ffa0-ffa7 : ide2 $ cat /proc/iomem 00000000-0009fbff : System RAM 00000000-00000000 : Crash kernel 0009fc00-0009ffff : reserved 000c0000-000cffff : pnp 00:0d 000e0000-000fffff : reserved 00100000-77fbffff : System RAM 00200000-00403abb : Kernel code 00403abc-004f7d3f : Kernel data 77fc0000-77fcdfff : ACPI Tables 77fce000-77feffff : ACPI Non-volatile Storage 77ff0000-77ffffff : reserved 78000000-7fffffff : pnp 00:06 c0000000-cfffffff : 0000:00:05.0 c0000000-c7ffffff : vesafb dd000000-ddffffff : 0000:00:05.0 de000000-deffffff : 0000:00:05.0 dfd80000-dfdbffff : pnp 00:06 dfdd3000-dfdd3fff : 0000:00:14.0 dfdd3000-dfdd3fff : forcedeth dfdd4000-dfdd7fff : 0000:00:10.1 dfdd4000-dfdd7fff : ICH HD audio dfddc000-dfddcfff : 0000:00:0f.0 dfddc000-dfddcfff : sata_nv dfddd000-dfdddfff : 0000:00:0e.0 dfddd000-dfdddfff : sata_nv dfdde000-dfddefff : 0000:00:0b.0 dfdde000-dfddefff : ohci_hcd dfddfc00-dfddfcff : 0000:00:0b.1 dfddfc00-dfddfcff : ehci_hcd dfde0000-dfdfffff : 0000:00:05.0 dfe00000-dfefffff : PCI Bus #01 dfee0000-dfeeffff : 0000:01:00.0 dfefe000-dfefffff : 0000:01:00.0 dfefe000-dfefffff : ahci dff00000-dfffffff : PCI Bus #04 dffff800-dfffffff : 0000:04:05.0 dffff800-dfffffff : firewire_ohci e0000000-efffffff : pnp 00:0c fec00000-fec00fff : IOAPIC 0 fec00000-fec00fff : reserved fee00000-fee00fff : Local APIC fee01000-feefffff : pnp 00:06 fefe0000-fefe01ff : pnp 00:05 ff780000-ffffffff : reserved $ cat /proc/scsi/scsi Attached devices: Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ST3320620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Host: scsi3 Channel: 00 Id: 00 Lun: 00 Vendor: ASUS Model: DRW-1814BLT Rev: 1.04 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ST3160812AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Software Environment: $ cat /proc/modules xt_multiport 7680 1 - Live 0xffffffff88350000 binfmt_misc 17292 1 - Live 0xffffffff8834a000 ipt_ULOG 15624 1 - Live 0xffffffff88345000 ac 10760 0 - Live 0xffffffff88341000 battery 18064 0 - Live 0xffffffff8833b000 ipv6 303208 26 - Live 0xffffffff882ef000 cpufreq_stats 10400 0 - Live 0xffffffff882eb000 cpufreq_conservative 12424 0 - Live 0xffffffff882e6000 cpufreq_ondemand 13456 0 - Live 0xffffffff882e1000 cpufreq_powersave 6272 0 - Live 0xffffffff882de000 cpufreq_userspace 9604 0 - Live 0xffffffff882da000 freq_table 9728 2 cpufreq_stats,cpufreq_ondemand, Live 0xffffffff882d6000 ipt_REJECT 9344 1 - Live 0xffffffff882d2000 xt_tcpudp 7936 7 - Live 0xffffffff882cf000 xt_state 7040 1 - Live 0xffffffff882cc000 iptable_nat 12036 0 - Live 0xffffffff882c8000 nf_nat 26028 1 iptable_nat, Live 0xffffffff882c0000 nf_conntrack_ipv4 24336 3 iptable_nat, Live 0xffffffff882b9000 nf_conntrack 77696 4 xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4, Live 0xffffffff882a5000 nfnetlink 10952 3 nf_nat,nf_conntrack_ipv4,nf_conntrack, Live 0xffffffff882a1000 iptable_filter 7680 1 - Live 0xffffffff8829e000 ip_tables 25960 2 iptable_nat,iptable_filter, Live 0xffffffff88296000 x_tables 24712 7 xt_multiport,ipt_ULOG,ipt_REJECT,xt_tcpudp,xt_state,iptable_nat,ip_tables, Live 0xffffffff8828e000 fuse 50480 1 - Live 0xffffffff88280000 it87 27664 0 - Live 0xffffffff88278000 hwmon_vid 7296 1 it87, Live 0xffffffff88275000 firewire_sbp2 20624 0 - Live 0xffffffff8826e000 loop 23428 0 - Live 0xffffffff88267000 snd_hda_intel 339364 0 - Live 0xffffffff88213000 snd_pcm_oss 48288 0 - Live 0xffffffff88206000 snd_mixer_oss 21376 1 snd_pcm_oss, Live 0xffffffff881ff000 snd_pcm 89864 2 snd_hda_intel,snd_pcm_oss, Live 0xffffffff881e8000 snd_timer 28552 1 snd_pcm, Live 0xffffffff881e0000 snd 65640 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, Live 0xffffffff881ce000 k8temp 10496 0 - Live 0xffffffff881ca000 serio_raw 11908 0 - Live 0xffffffff881c6000 button 13856 0 - Live 0xffffffff881c1000 psmouse 45596 0 - Live 0xffffffff881b4000 soundcore 13216 1 snd, Live 0xffffffff881af000 snd_page_alloc 14608 2 snd_hda_intel,snd_pcm, Live 0xffffffff881aa000 i2c_nforce2 11008 0 - Live 0xffffffff881a6000 i2c_core 30976 1 i2c_nforce2, Live 0xffffffff8819d000 pcspkr 7808 0 - Live 0xffffffff8819a000 evdev 15360 0 - Live 0xffffffff88195000 joydev 15744 0 - Live 0xffffffff88190000 tsdev 13440 0 - Live 0xffffffff8818b000 ext3 137232 7 - Live 0xffffffff88168000 jbd 68080 1 ext3, Live 0xffffffff88156000 mbcache 13952 1 ext3, Live 0xffffffff88151000 dm_mirror 27008 0 - Live 0xffffffff88149000 dm_snapshot 21960 0 - Live 0xffffffff88142000 dm_mod 64368 15 dm_mirror,dm_snapshot, Live 0xffffffff88131000 sg 40872 0 - Live 0xffffffff88126000 sr_mod 22436 0 - Live 0xffffffff8811f000 cdrom 39592 1 sr_mod, Live 0xffffffff88114000 sd_mod 33408 7 - Live 0xffffffff8810a000 amd74xx 19120 0 [permanent], Live 0xffffffff88104000 usbhid 34144 0 - Live 0xffffffff880fa000 hid 33152 1 usbhid, Live 0xffffffff880f0000 firewire_ohci 22912 0 - Live 0xffffffff880e7000 jmicron 8576 0 [permanent], Live 0xffffffff880e1000 generic 10372 0 [permanent], Live 0xffffffff880db000 sata_nv 25988 7 - Live 0xffffffff880d1000 ehci_hcd 38156 0 - Live 0xffffffff880c6000 firewire_core 49600 2 firewire_sbp2,firewire_ohci, Live 0xffffffff880b8000 crc_itu_t 6656 1 firewire_core, Live 0xffffffff880b5000 forcedeth 53384 0 - Live 0xffffffff880a4000 ahci 29700 0 - Live 0xffffffff88099000 ohci_hcd 26628 0 - Live 0xffffffff8808f000 ide_core 149904 3 amd74xx,jmicron,generic, Live 0xffffffff88067000 ata_generic 13188 0 - Live 0xffffffff88062000 libata 129840 3 sata_nv,ahci,ata_generic, Live 0xffffffff88041000 scsi_mod 164152 5 firewire_sbp2,sg,sr_mod,sd_mod,libata, Live 0xffffffff88017000 thermal 22176 0 - Live 0xffffffff88010000 processor 42984 1 thermal, Live 0xffffffff88004000 fan 10248 0 - Live 0xffffffff88000000 Problem Description: $ dmesg Linux version 2.6.23-rc5-amd64 (Debian 2.6.23~rc5-1~experimental.1~snapshot.9529) (waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14+1)) #1 SMP Mon Sep 17 01:12:09 UTC 2007 Command line: root=/dev/sdb2 ro video=vesafb:ywrap,mtrr vga=791 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000077fc0000 (usable) BIOS-e820: 0000000077fc0000 - 0000000077fce000 (ACPI data) BIOS-e820: 0000000077fce000 - 0000000077ff0000 (ACPI NVS) BIOS-e820: 0000000077ff0000 - 0000000078000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 491456) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000FB5A0, 0014 (r0 ACPIAM) ACPI: RSDT 77FC0000, 0030 (r1 A M I OEMRSDT 8000630 MSFT 97) ACPI: FACP 77FC0200, 0084 (r2 A M I OEMFACP 8000630 MSFT 97) ACPI: DSDT 77FC0440, 6087 (r1 A0588 A0588000 0 INTL 20060113) ACPI: FACS 77FCE000, 0040 ACPI: MCFG 77FC0400, 003C (r1 A M I OEMMCFG 8000630 MSFT 97) ACPI: OEMB 77FCE040, 0060 (r1 A M I AMI_OEM 8000630 MSFT 97) Scanning NUMA topology in Northbridge 24 CPU has 2 num_cores No NUMA configuration found Faking a node at 0000000000000000-0000000077fc0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 491456) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000077fc0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 491456 On node 0 totalpages: 491359 DMA zone: 56 pages used for memmap DMA zone: 1043 pages reserved DMA zone: 2900 pages, LIFO batch:0 DMA32 zone: 6663 pages used for memmap DMA32 zone: 480697 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x508 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: ASUS MPTABLE: Product ID: MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 I/O APIC #2 at 0xFEC00000. Setting APIC routing to flat Processors: 2 swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 78000000:86c00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 35176 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 483597 Policy zone: DMA32 Kernel command line: root=/dev/sdb2 ro video=vesafb:ywrap,mtrr vga=791 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2210.076 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... CPU 0: aperture @ c270000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 1927936k/1965824k available (2062k kernel code, 37500k reserved, 976k data, 304k init) Calibrating delay using timer specific routine.. 4424.05 BogoMIPS (lpj=8848117) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 8ca0) ExtINT not setup in hardware but reported by MP table Using local APIC timer interrupts. result 12557316 Detected 12.557 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4420.51 BogoMIPS (lpj=8841020) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3) ACPI: Using PIC for interrupt routing Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:10.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNEA] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNEB] (IRQs *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 10 11 14 *15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 11 14 *15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LSA0] (IRQs 5 *7 10 11 14 15) ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LATA] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - AF, should be AE [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0F03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:05' and the driver 'system' pnp: 00:05: iomem range 0xfefe0000-0xfefe01ff has been reserved pnp: match found with the PnP device '00:06' and the driver 'system' pnp: 00:06: iomem range 0xdfd80000-0xdfdbffff has been reserved pnp: 00:06: iomem range 0xfee01000-0xfeefffff has been reserved pnp: 00:06: iomem range 0x78000000-0x7fffffff has been reserved pnp: match found with the PnP device '00:07' and the driver 'system' pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved pnp: match found with the PnP device '00:0b' and the driver 'system' pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved pnp: 00:0b: ioport range 0xa10-0xa1f has been reserved pnp: 00:0b: ioport range 0xa20-0xa2f has been reserved pnp: 00:0b: ioport range 0xa30-0xa3f has been reserved pnp: match found with the PnP device '00:0c' and the driver 'system' pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved pnp: match found with the PnP device '00:0d' and the driver 'system' pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved PCI: Bridge: 0000:00:02.0 IO window: d000-dfff MEM window: dfe00000-dfefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:10.0 IO window: e000-efff MEM window: dff00000-dfffffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 6254k freed audit: initializing netlink socket (disabled) audit(1190795172.820:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:05.0 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000b00000, using 3072k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:08' and the driver 'serial' 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize input: Macintosh mouse button emulation as /class/input/input0 pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:0a' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 304k freed input: AT Translated Set 2 keyboard as /class/input/input1 ACPI Exception (processor_core-0797): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0797): AE_NOT_FOUND, Processor Device is not present [20070126] SCSI subsystem initialized libata version 2.21 loaded. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0b.0: irq 5, io mem 0xdfdde000 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 15 PCI: setting IRQ 15 as level-triggered ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 15 (level, low) -> IRQ 15 PCI: Setting latency timer of device 0000:00:14.0 to 64 forcedeth: using HIGHDMA usb 1-1: new full speed USB device using ohci_hcd and address 2 eth0: forcedeth.c: subsystem: 01043:81bc bound to 0000:00:14.0 usb 1-1: configuration #1 chosen from 1 choice ahci 0000:01:00.0: version 2.3 ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 5 net eth2: device_rename: sysfs_create_symlink failed (-17) udev: renamed network interface eth0 to eth2 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 5 (level, low) -> IRQ 5 usb 1-2: new low speed USB device using ohci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice usb 1-7: new full speed USB device using ohci_hcd and address 4 ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:01:00.0: flags: 64bit ncq pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:01:00.0 to 64 scsi0 : ahci usb 1-7: configuration #1 chosen from 1 choice hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected scsi1 : ahci ata1: SATA max UDMA/133 cmd 0xffffc20000ab0100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 5 ata2: SATA max UDMA/133 cmd 0xffffc20000ab0180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 5 usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 15 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 15 (level, low) -> IRQ 15 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 15, io mem 0xdfddfc00 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice usb 1-1: USB disconnect, address 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb 1-2: USB disconnect, address 3 sata_nv 0000:00:0e.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:0e.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001c482 bmdma 0x000000000001c000 irq 7 ata4: SATA max UDMA/133 cmd 0x000000000001c400 ctl 0x000000000001c082 bmdma 0x000000000001c008 irq 7 usb 1-7: USB disconnect, address 4 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 usb 2-7: new high speed USB device using ehci_hcd and address 4 usb 2-7: configuration #1 chosen from 1 choice hub 2-7:1.0: USB hub found hub 2-7:1.0: 4 ports detected ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATAPI: ASUS DRW-1814BLT, 1.04, max UDMA/66 ata4.00: configured for UDMA/66 scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 usb 1-1: new full speed USB device using ohci_hcd and address 5 scsi 3:0:0:0: CD-ROM ASUS DRW-1814BLT 1.04 PQ: 0 ANSI: 5 ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSA1] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:0f.0 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x000000000001bc00 ctl 0x000000000001b882 bmdma 0x000000000001b400 irq 11 ata6: SATA max UDMA/133 cmd 0x000000000001b800 ctl 0x000000000001b482 bmdma 0x000000000001b408 irq 11 usb 1-1: configuration #1 chosen from 1 choice ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) usb 1-2: new low speed USB device using ohci_hcd and address 6 ata5.00: ATA-7: ST3160812AS, 3.AAD, max UDMA/133 ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 usb 1-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2 ata6: SATA link down (SStatus 0 SControl 300) scsi 4:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5 JMB363: IDE controller at PCI slot 0000:01:00.1 PCI: Enabling device 0000:01:00.1 (0000 -> 0001) ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:01:00.1[B] -> Link [LNEC] -> GSI 10 (level, low) -> IRQ 10 JMB363: chipset revision 2 JMB363: 100% native mode on irq 10 PCI: Setting latency timer of device 0000:01:00.1 to 64 ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:0:0: [sda] Attached SCSI disk sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 4:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 sd 4:0:0:0: Attached scsi generic sg2 type 0 Probing IDE interface ide1... NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 161 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller ide2: BM-DMA at 0xffa0-0xffa7, BIOS settings: hde:pio, hdf:pio Probing IDE interface ide2... ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 firewire_ohci: Added fw-ohci device 0000:04:05.0, OHCI version 1.10 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. firewire_core: created new fw device fw0 (0 config rom retries, S400) input: PC Speaker as /class/input/input4 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input6 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:10.1 to 64 hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k Adding 1951856k swap on /dev/sdb1. Priority:-2 extents:1 across:1951856k EXT3 FS on sdb2, internal journal loop: module loaded it87: Found IT8716F chip at 0xa10, revision 1 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) fuse init (API version 7.8) kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (2 cpu cores) (version 2.00.00) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure NET: Registered protocol family 10 lo: Disabled Privacy Extensions Steps to reproduce: the forcedeth driver is broken on Nvidia MCP51 since (at least 2.6.21.6); works perfectly with 2.6.18 see also: 2.6.21.6: http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg182088.html 2.6.22-2, 2.6.22-3, 2.6.23-rc4: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=438663 2.6.22-2: http://lkml.org/lkml/2007/9/1/172 2.6.23-rc4: http://lkml.org/lkml/2007/9/1/174
What is not functioning? - Do you see an interface when you type "ifconfig"? - Are the Rx and Tx counters not incrementing? - Can you check "cat /proc/interrupts"? - Is the ethernet cable link light on?
Linux ile 2.6.23-rc5-amd64 #1 SMP Mon Sep 17 01:12:09 UTC 2007 x86_64 GNU/Linux lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:162 errors:0 dropped:0 overruns:0 frame:0 TX packets:162 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12410 (12.1 KiB) TX bytes:12410 (12.1 KiB) CPU0 CPU1 0: 297 35914 IO-APIC-edge timer 1: 0 83 IO-APIC-edge i8042 2: 0 0 XT-PIC-XT cascade 5: 2 534 IO-APIC-fasteoi ohci_hcd:usb1, ahci 7: 27 37803 IO-APIC-fasteoi sata_nv 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-edge acpi 10: 0 412 IO-APIC-fasteoi HDA Intel 11: 3 5092 IO-APIC-fasteoi firewire_ohci, sata_nv 12: 0 4 IO-APIC-edge i8042 15: 0 28 IO-APIC-fasteoi ehci_hcd:usb2 NMI: 0 0 LOC: 47595 36065 ERR: 0 I use currently: $ uname -a ;/sbin/ifconfig; cat /proc/interrupts Linux ile 2.6.18-5-amd64 #1 SMP Thu Aug 30 01:14:54 UTC 2007 x86_64 GNU/Linux eth1 Link encap:Ethernet HWaddr 26:9E:A6:F3:18:00 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::249e:a6ff:fef3:1800/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1414364 errors:0 dropped:0 overruns:0 frame:0 TX packets:1982183 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:828681731 (790.2 MiB) TX bytes:937220033 (893.8 MiB) Interrupt:15 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:21859 errors:0 dropped:0 overruns:0 frame:0 TX packets:21859 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1309464 (1.2 MiB) TX bytes:1309464 (1.2 MiB) CPU0 CPU1 0: 23891512 0 IO-APIC-level timer 1: 32475 0 IO-APIC-edge i8042 2: 0 0 XT-PIC cascade 5: 239633 0 IO-APIC-level ohci_hcd:usb2 7: 1375701 0 IO-APIC-level libata 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-edge acpi 10: 5876763 0 IO-APIC-level HDA Intel, nvidia 11: 163683 0 IO-APIC-level ohci1394, libata 15: 12942617 0 IO-APIC-level ehci_hcd:usb1, eth1 NMI: 11628 13299 LOC: 23893116 23893147 ERR: 0 MIS: 0
It looks like you received and transmitted quite a few packets. If you perform a ping, do either of the counters increment? Also, does the interrupt count increment for eth1 (i.e. 15)? Once in the failing state, can you send me the output of "ethtool -d eth1"?
as I said first: "the forcedeth driver is broken on Nvidia MCP51 since (at least 2.6.21.6); works perfectly with 2.6.18" this bug report is about 2.6.23-rc5-amd64 $ sudo ethtool -d eth1 Cannot get driver information: No such device Comment #2 gave you a working example on 2.6.18-5-amd64 if you want to compare
Ok, I didn't realize that Comment 2 was on working system. In the dmesg trace I see the following: eth0: forcedeth.c: subsystem: 01043:81bc bound to 0000:00:14.0 net eth2: device_rename: sysfs_create_symlink failed (-17) udev: renamed network interface eth0 to eth2 Not sure what the renaming is all about. What happens if you manually perform "ifconfig eth0 up" or "ifconfig eth2 up".
$ sudo ifconfig eth0 up eth0: ERROR while getting interface flags: No such device $ sudo ifconfig eth2 up $ sudo ifconfig eth2 Link encap:Ethernet HWaddr 00:18:F3:A6:9E:26 inet6 addr: fe80::218:f3ff:fea6:9e26/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:5 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:420 (420.0 b) TX bytes:4294967713 (4.0 GiB) Interrupt:15 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:162 errors:0 dropped:0 overruns:0 frame:0 TX packets:162 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12410 (12.1 KiB) TX bytes:12410 (12.1 KiB) yeah! for a reason I that don't understand, udev now renames eth0 in eth2 in 2.6.18, it renamed it in eth1 on my debian, i changed that in: /etc/network/interfaces thanks a lot Ayaz for showing me the way!