Most recent kernel where this bug did not occur: 2.4.33.3 Distribution: Slackware 11.0 Hardware Environment: MB: FoxConn 975XAA, CPU: Pentium D 930 ( 3.oo GHz) Output of lspci -vv will come as atachment Software Environment: Problem Description: When ACPI is enabled and build into the kernel, the system hangs on boot. You can see the whole procedure in the file 1M.txt that will be attached. Kernel config is in the file config-with-acpi.txt. If acpi is not build, then everything "seems" normal - file Correct.txt. kernel config differs only in acpi section - acpi is not build. There is VMWare Server on this machine, but the module was removed from laoding, so any binary part does not exists when making this outputs. The problem also occured when giving pci=noacpi optio nat boot - pci-noacpi.txt Steps to reproduce: Every time acpi is build for this system. ATI driver is not presented on the system. Short output of lspci: 00:00.0 Host bridge: Intel Corporation 975X Express Memory Controller Hub (rev c0) 00:01.0 PCI bridge: Intel Corporation 975X Express PCI Express Root Port (rev c0) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] 01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22) 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22) 04:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
Created attachment 11871 [details] All promised files in the zip
*** Bug 8675 has been marked as a duplicate of this bug. ***
irq 218: nobody cared (try booting with the "irqpoll" option) [<c014022a>] __report_bad_irq+0x36/0x75 [<c01402f6>] note_interrupt+0x71/0xa4 [<c0140a50>] handle_edge_irq+0xd4/0xfb [<c01041c0>] do_IRQ+0x7b/0x93 [<c0102f2b>] common_interrupt+0x23/0x28 [<c0100a84>] mwait_idle_with_hints+0x34/0x38 [<c0100951>] cpu_idle+0x63/0x7d [<c055dbbb>] start_kernel+0x1eb/0x1ef [<c055d587>] unknown_bootoption+0x0/0x181 ======================= handlers: [<c02fa23c>] (ahci_interrupt+0x0/0xc8) Disabling IRQ #218 please confirm that the kernel you built with ACPI support works properly when booted with "acpi=off". If it does not, then you may have other differences between the working and failing configs besides ACPI.
Created attachment 12013 [details] Boot proccess with acpi=off. Also the actual kernel config! With acpi=off the boot is successfull. Excuse me for my mistake in the first attachment!
Created attachment 12015 [details] Boot proccess with acpi enabled! The same kernel! Boot proccess with acpi enabled! The same kernel!
Can the kernel boot successfully if you enable acpi and boot with pci=nomsi? Please attach the content of /proc/interrupts if it works for you.
Please try the latest kernel, say 2.6.23 Please attach the output of acpidump and lspci -vvxxx. Please try to boot with pnpacpi=off and attach the dmesg output.
Ok, but just give me some time, because I will be not near the PC and not near any Internet access in the next couple of days.
(In reply to comment #6) > Can the kernel boot successfully if you enable acpi and boot with pci=nomsi? > Please attach the content of /proc/interrupts if it works for you. > Sorry, no success on this. Outputs will come later.
(In reply to comment #7) > Please try the latest kernel, say 2.6.23 > Please attach the output of acpidump and lspci -vvxxx. > Please try to boot with pnpacpi=off and attach the dmesg output. > No success also
Will you please try it with boot option of pci=nommconf besides the tests in comment #7? Thanks.
Hi, Sorry, but my english is not s ogood. COuld you clarify for me should I run the kernel like this: pnpacpi=off pci=nommconf or just like this: pci=nommconf Or should I try both?
Both.
Created attachment 14022 [details] Bzip2 archive of bootup proccess with various kernel boot options as requested
Again no success. I can make for you an access to the machine. There is serial console attached to it and you can connect trough another PC that is located here.
The output of acpidump is also required. Will you please attach it? The acpidump tool can be found http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.gz Thanks.
Created attachment 14097 [details] The requested acpidump The acpidump output as requested
Please try to boot with the three paramters "pci=nomsi irqpoll pci=routeirq" altogether.
Created attachment 14120 [details] tools to get bios prt table Would you please run this tool and attach the result?
Created attachment 14121 [details] pirq result The kernel runned is the working one with acpi=off
Created attachment 14122 [details] Boot proccess with pci=nomsi irqpoll pci=routeirq kernel options Booting with requested options: nomsi_irqpoll_routeirq
Will you please test the option of "acpi=noirq pci=nomsi" and attach the output of dmesg?
Ok, but I will be able to make it on 30th or 31fs of December, so until then there will be no feedback. Sorry, I am just in a middle of LAB reconfiguration. I wish you Merry Christmas and Happy New Year! Best Regards Ivo Sabev
Created attachment 14244 [details] Boot proccess with acpi=noirq pci=nomsi kernel options Happy New Year! I wish you exponential drop in the number of bugs :) As of today I would like to inform you that I will not have serial console access to the machine very regularly so please be patient waiting for new debugs. I am so sorry I really want this bug to be fixed and I will do everything to minimize this period of "no console access". Best Regards
Hi, Ivo Will you please try to boot the system with the option of "pci=nommconf acpi=noirq pci=nomsi" and attach the output of dmesg? Thanks.
Created attachment 14458 [details] Boot proccess with requested options
Hi, Ivo Will you please try the latest kernel and see whether the problem still exists? Thanks.
No response, reject it.
Hi all, Sorry to bring you this news, but the system was disasmbeled due to the bug and new wil lbe build, using the same chipset - 975X. If there is the same problem , I will inform you bugme-daemon@bugzilla.kernel.org wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=8674 > > > shaohua.li@intel.com changed: > > What |Removed |Added > ---------------------------------------------------------------------------- > Status|NEEDINFO |REJECTED > Resolution| |INSUFFICIENT_DATA > > > > > ------- Comment #28 from shaohua.li@intel.com 2008-07-15 19:33 ------- > No response, reject it. > > > <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=UTF-8" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> <font face="serif">Hi all,<br> Sorry to bring you this news, but the system was disasmbeled due to the bug and new wil lbe build, using the same chipset - 975X. If there is the same problem , I will inform you<br> </font><br> <a class="moz-txt-link-abbreviated" href="mailto:bugme-daemon@bugzilla.kernel.org">bugme-daemon@bugzilla.kernel.org</a> wrote: <blockquote cite="mid:20080716023300.68F93108035@picon.linux-foundation.org" type="cite"> <pre wrap=""><a class="moz-txt-link-freetext" href="http://bugzilla.kernel.org/show_bug.cgi?id=8674">http://bugzilla.kernel.org/show_bug.cgi?id=8674</a> <a class="moz-txt-link-abbreviated" href="mailto:shaohua.li@intel.com">shaohua.li@intel.com</a> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |REJECTED Resolution| |INSUFFICIENT_DATA ------- Comment #28 from <a class="moz-txt-link-abbreviated" href="mailto:shaohua.li@intel.com">shaohua.li@intel.com</a> 2008-07-15 19:33 ------- No response, reject it. </pre> </blockquote> </body> </html>
Motherboard changed to one with Intel P45 chipset. No problems. Old motherboard can be tested around Cristmass unfortenately. Decide for the status of this bug.