Linux version 2.6.18-std-smp-alt3 (builder@mash.office.altlinux.ru) (gcc version 4.1.1 20061011 (ALT Linux, build 4.1.1-alt10)) #1 SMP Fri Dec 22 22:43:04 MSK 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4060 On node 0 totalpages: 524272 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294896 pages, LIFO batch:31 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f8010 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x7fff9740 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff9980 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff9680 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Detected 2009.356 MHz processor. Built 1 zonelists. Total pages: 524272 Kernel command line: BOOT_IMAGE=2618-std-smp-3 ro root=2106 noapic mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2075020k/2097088k available (1576k kernel code, 20904k reserved, 599k data, 192k init, 1179584k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4021.94 BogoMIPS (lpj=8043899) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 515k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. ACPI: setting ELCR to 0200 (from 0c20) CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4018.80 BogoMIPS (lpj=8037617) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Total of 2 processors activated (8040.75 BogoMIPS). checking TSC synchronization across 2 CPUs: CPU#0 had 241 usecs TSC skew, fixed it up. CPU#1 had -241 usecs TSC skew, fixed it up. Brought up 2 CPUs spurious 8259A interrupt: IRQ7. migration_cost=125 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on 0:18 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:0e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0x1000-0x107f could not be reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved PCI: Bridge: 0000:00:04.0 IO window: a000-afff MEM window: fa000000-fcffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:0e.0 IO window: 8000-9fff MEM window: fde00000-fdefffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:13.0 IO window: 6000-7fff MEM window: fdd00000-fddfffff PREFETCH window: fdc00000-fdcfffff PCI: Bridge: 0000:00:15.0 IO window: 5000-5fff MEM window: fdb00000-fdbfffff PREFETCH window: fda00000-fdafffff PCI: Bridge: 0000:00:16.0 IO window: 4000-4fff MEM window: fd900000-fd9fffff PREFETCH window: fd800000-fd8fffff PCI: Bridge: 0000:00:17.0 IO window: 3000-3fff MEM window: fd700000-fd7fffff PREFETCH window: fd600000-fd6fffff PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:15.0 to 64 PCI: Setting latency timer of device 0000:00:16.0 to 64 PCI: Setting latency timer of device 0000:00:17.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1170983832.780:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) 0000:00:0a.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 PCI: Setting latency timer of device 0000:00:04.0 to 64 pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie03] PCI: Setting latency timer of device 0000:00:13.0 to 64 pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:13.0:pcie00] Allocate Port Service[0000:00:13.0:pcie03] PCI: Setting latency timer of device 0000:00:15.0 to 64 pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:15.0:pcie00] Allocate Port Service[0000:00:15.0:pcie03] PCI: Setting latency timer of device 0000:00:16.0 to 64 pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:16.0:pcie00] Allocate Port Service[0000:00:16.0:pcie03] PCI: Setting latency timer of device 0000:00:17.0 to 64 pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:17.0:pcie00] Allocate Port Service[0000:00:17.0:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5 0000:02:05.0: ttyS1 at I/O 0x9c00 (irq = 5) is a 16550A 0000:02:05.0: ttyS2 at I/O 0x9800 (irq = 5) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 Time: acpi_pm clocksource has been installed. VFS: Mounted root (romfs filesystem) readonly. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx JMB363: IDE controller at PCI slot 0000:03:00.1 PCI: Enabling device 0000:03:00.1 (0000 -> 0001) ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:03:00.1[B] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11 JMB363: chipset revision 2 JMB363: 100% native mode on irq 11 PCI: Setting latency timer of device 0000:03:00.1 to 64 ide0: BM-DMA at 0x6c00-0x6c07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x6c08-0x6c0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input0 Probing IDE interface ide1... NFORCE-MCP55: IDE controller at PCI slot 0000:00:0c.0 NFORCE-MCP55: chipset revision 161 NFORCE-MCP55: not 100% native mode: will probe irqs later NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-MCP55: 0000:00:0c.0 (rev a1) UDMA133 controller ide2: BM-DMA at 0xf400-0xf407, BIOS settings: hde:DMA, hdf:DMA Probing IDE interface ide2... hde: MAXTOR 6L040J2, ATA DISK drive hdf: _NEC CD-RW NR-9100A, ATAPI CD/DVD-ROM drive ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide0... Probing IDE interface ide1... hde: max request size: 128KiB hde: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133) hde: cache flushes supported hde: hde1 hde2 < hde5 hde6 > SCSI subsystem initialized libata version 2.00 loaded. sata_nv 0000:00:0d.0: version 2.0 ACPI: PCI Interrupt Link [LSID] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LSID] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:0d.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 10 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 10 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x977 Vendor: ATA Model: ST3320620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [LFID] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:0d.1 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 11 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 11 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x9E7 scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x967 ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LSA2] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:0d.2 to 64 ata5: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 5 ata6: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 5 scsi4 : sata_nv ata5: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC807 scsi5 : sata_nv ata6: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC007 ahci 0000:03:00.0: version 2.0 ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 11 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK6] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:03:00.0 to 64 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part ata7: SATA max UDMA/133 cmd 0xF8858100 ctl 0x0 bmdma 0x0 irq 11 ata8: SATA max UDMA/133 cmd 0xF8858180 ctl 0x0 bmdma 0x0 irq 11 scsi6 : ahci ata7: SATA link down (SStatus 0 SControl 300) scsi7 : ahci ata8: SATA link down (SStatus 0 SControl 300) SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hde6 Ending clean XFS mount for filesystem: hde6 VFS: Mounted root (xfs filesystem) readonly. Trying to move old root to /initrd ... /initrd does not exist. Ignored. Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 192k freed Executing init=/sbin/init Real Time Clock Driver v1.12ac Adding 1044184k swap on /dev/hde5. Priority:-1 extents:1 across:1044184k hde: dma_intr: status=0x51 { DriveReady SeekComplete Error } hde: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hde: dma_intr: status=0x51 { DriveReady SeekComplete Error } hde: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hde: dma_intr: status=0x51 { DriveReady SeekComplete Error } hde: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hde: dma_intr: status=0x51 { DriveReady SeekComplete Error } hde: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdf: DMA disabled ide2: reset: success device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com XFS mounting filesystem hde1 Ending clean XFS mount for filesystem: hde1 sd 0:0:0:0: Attached scsi generic sg0 type 0 i2c_adapter i2c-0: nForce2 SMBus adapter at 0xfc00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0xf800 usbcore: registered new driver usbfs usbcore: registered new driver hub forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LMAC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:10.0 to 64 forcedeth: using HIGHDMA ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] eth0: forcedeth.c: subsystem: 01695:1026 bound to 0000:00:10.0 ACPI: PCI Interrupt Link [LMC1] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LMC1] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:11.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 01695:1026 bound to 0000:00:11.0 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LUB2] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:0a.1 to 64 ehci_hcd 0000:00:0a.1: EHCI Host Controller ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0a.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0a.1 ehci_hcd 0000:00:0a.1: irq 11, io mem 0xfe02e000 ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LUBA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ohci_hcd 0000:00:0a.0: OHCI Host Controller ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0a.0: irq 10, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected NET: Registered protocol family 17 input: PC Speaker as /class/input/input1 FDC 0 is a post-1991 82077 input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2 ts: Compaq touchscreen protocol output hdf: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (35 C) usb 1-5: new high speed USB device using ehci_hcd and address 2 usb 1-5: configuration #1 chosen from 1 choice usbcore: registered new driver libusual Initializing USB Mass Storage driver... scsi8 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 494592 512-byte hdwr sectors (253 MB) sdb: Write Protect is off sdb: Mode Sense: 0b 00 00 08 sdb: assuming drive cache: write through SCSI device sdb: 494592 512-byte hdwr sectors (253 MB) sdb: Write Protect is off sdb: Mode Sense: 0b 00 00 08 sdb: assuming drive cache: write through sdb: sdb1 sd 8:0:0:0: Attached scsi removable disk sdb sd 8:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete
Created attachment 10365 [details] lspci -v
Is this still a problem with 2.6.25-rc2?
Looks like a clone of the other disabling DMA ont he