Susanne,
You had this working with 2.6.11, how is it with newest kernels (as of today 2.6.22+)?
If the problem still there, can you do bisect search for the patch(es) that bloke it?
Thanks.

Subject: Re:  PCMCIA bridge not working

will check it with newest kernel asap and come back to you
could you please explain to me: "...can you do bisect search for the 
patch(es) that bloke it?"
thanks very much!
Susanne




bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
> protasnb@gmail.com changed:
>
>            What    |Removed                     |Added
> ----------------------------------------------------------------------------
>                  CC|                            |protasnb@gmail.com
>
>
>
>
> ------- Comment #1 from protasnb@gmail.com  2007-07-06 11:35 -------
> Susanne,
> You had this working with 2.6.11, how is it with newest kernels (as of today
> 2.6.22+)?
> If the problem still there, can you do bisect search for the patch(es) that
> bloke it?
> Thanks.
>
>
>   

Well, when you have working kernel which stops working with next release, you can find actual patch or change that was incorporated and caused it not work anymore, by excluding new updates and eventually getting the one that broke your working kernel. Here is the procedure:

# install git and cogito on your computer (see kernel.org for information)

# clone Linus' tree:
cg-clone \
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

# start bisecting:
cd linux-2.6
git bisect start
git bisect bad v2.6.18-rc5
git bisect good v2.6.18-rc4

# start round
cp /path/to/.config .
make oldconfig
make
# install kernel, check whether it's good or bad, then:
git bisect [bad|good]
# start next round


After at about 9 reboots, you'll have found the guilty commit
("...  is first bad commit").


More information on git bisecting:
  man git-bisect

It takes multiple reboots and patience... but then you can tell exactly what patch introduced the problem.

Hope you can spend some time doing this - will be greatly appreciated.
Thanks.

Subject: Re:  PCMCIA bridge not working

okidoki.. will try to learn this and execute... will take some time
will come back to you in any case
thanks a lot

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #3 from protasnb@gmail.com  2007-07-06 13:58 -------
> Well, when you have working kernel which stops working with next release, you
> can find actual patch or change that was incorporated and caused it not work
> anymore, by excluding new updates and eventually getting the one that broke
> your working kernel. Here is the procedure:
>
> # install git and cogito on your computer (see kernel.org for information)
>
> # clone Linus' tree:
> cg-clone \
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>
> # start bisecting:
> cd linux-2.6
> git bisect start
> git bisect bad v2.6.18-rc5
> git bisect good v2.6.18-rc4
>
> # start round
> cp /path/to/.config .
> make oldconfig
> make
> # install kernel, check whether it's good or bad, then:
> git bisect [bad|good]
> # start next round
>
>
> After at about 9 reboots, you'll have found the guilty commit
> ("...  is first bad commit").
>
>
> More information on git bisecting:
>   man git-bisect
>
> It takes multiple reboots and patience... but then you can tell exactly what
> patch introduced the problem.
>
> Hope you can spend some time doing this - will be greatly appreciated.
> Thanks.
>
>
>   

hi,
the version that broke my pcmcia is 2.6.13-rc1
2.6.12 still works.
I listed the related protocolls:

protocolls of kernel 2.6.12 :  http://phpfi.com/252251

protocolls of kernel 2.6.13-rc1 :  http://phpfi.com/252253

the compilation was done on Suse 9.3

if I can be of further help please let me know
thank's a lot for your efforts and best regards
Susanne Schneider


bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #3 from protasnb@gmail.com  2007-07-06 13:58 -------
> Well, when you have working kernel which stops working with next release, you
> can find actual patch or change that was incorporated and caused it not work
> anymore, by excluding new updates and eventually getting the one that broke
> your working kernel. Here is the procedure:
>
> # install git and cogito on your computer (see kernel.org for information)
>
> # clone Linus' tree:
> cg-clone \
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>
> # start bisecting:
> cd linux-2.6
> git bisect start
> git bisect bad v2.6.18-rc5
> git bisect good v2.6.18-rc4
>
> # start round
> cp /path/to/.config .
> make oldconfig
> make
> # install kernel, check whether it's good or bad, then:
> git bisect [bad|good]
> # start next round
>
>
> After at about 9 reboots, you'll have found the guilty commit
> ("...  is first bad commit").
>
>
> More information on git bisecting:
>   man git-bisect
>
> It takes multiple reboots and patience... but then you can tell exactly what
> patch introduced the problem.
>
> Hope you can spend some time doing this - will be greatly appreciated.
> Thanks.
>
>
>   

> protocolls of kernel 2.6.12 :  http://phpfi.com/252251
>
> protocolls of kernel 2.6.13-rc1 :  http://phpfi.com/252253

I'd like to compare those but it is hard when they are all
in html.  Could you please make the plain ascii files
available?  Perhaps attach them to this report.

Thanks.

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
> akpm@osdl.org changed:
>
>            What    |Removed                     |Added
> ----------------------------------------------------------------------------
>                  CC|                            |akpm@osdl.org
>
>
>
>
> ------- Comment #6 from akpm@osdl.org  2007-07-25 13:50 -------
>   
>> protocolls of kernel 2.6.12 :  http://phpfi.com/252251
>>
>> protocolls of kernel 2.6.13-rc1 :  http://phpfi.com/252253
>>     
>
> I'd like to compare those but it is hard when they are all
> in html.  Could you please make the plain ascii files
> available?  Perhaps attach them to this report.
>
> Thanks.
>
>   

voila:


----------------------boot.msg--------------------

Cannot find map file.
No module symbols loaded - kernel modules not enabled.

Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.12-default (susanne@linux) (gcc version 3.3.5 
20050117 (prerelease) (SUSE Linux)) #1 Mon Jul 23 22:38:52 CEST 2007
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
<4> BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
<4> BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<6>found SMP MP-table at 000ff780
<7>On node 0 totalpages: 130880
<7>  DMA zone: 4096 pages, LIFO batch:1
<7>  Normal zone: 126784 pages, LIFO batch:31
<7>  HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f7550
<7>ACPI: RSDT (v001 A M I  OEMRSDT  0x11000402 MSFT 0x00000097) @ 0x1ff40000
<7>ACPI: FADT (v001 A M I  OEMFACP  0x11000402 MSFT 0x00000097) @ 0x1ff40200
<7>ACPI: MADT (v001 A M I  OEMAPIC  0x11000402 MSFT 0x00000097) @ 0x1ff40390
<7>ACPI: OEMB (v001 A M I  OEMBIOS  0x11000402 MSFT 0x00000097) @ 0x1ff50040
<7>ACPI: DSDT (v001  A4K-U A4K-U001 0x00000001 INTL 0x02002026) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x4008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<4>Processor #0 15:4 APIC version 16
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<4>ACPI: BIOS IRQ0 pin2 override ignored.
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
<7>ACPI: IRQ9 used by override.
<7>ACPI: IRQ14 used by override.
<7>ACPI: IRQ15 used by override.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hda6 vga=0x317 selinux=0   
resume=/dev/hda5  splash=silent
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order: 11, 32768 bytes)
<4>Detected 1795.229 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 509904k/523520k available (1964k kernel code, 13032k 
reserved, 664k data, 212k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
<4>Calibrating delay using timer specific routine.. 3593.44 BogoMIPS 
(lpj=1796721)
<6>Security Framework v1.0.0 initialized
<6>SELinux:  Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 
00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 
00000000 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 1024K (64 bytes/line)
<7>CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 
00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: AMD Mobile AMD Athlon(tm) 64 Processor 3000+ stepping 0a
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 pin1=0 pin2=-1
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 4901k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20050309
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Embedded Controller [EC0] (gpe 37)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 17) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 19) *10
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *10
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 17) *11
<4>ACPI: PCI Interrupt Link [LUS0] (IRQs 20) *10
<4>ACPI: PCI Interrupt Link [LUS1] (IRQs 20) *11
<4>ACPI: PCI Interrupt Link [LUS2] (IRQs 20) *4
<4>ACPI: PCI Interrupt Link [LKLN] (IRQs 21) *0, disabled.
<4>ACPI: PCI Interrupt Link [LAUI] (IRQs 21) *5
<4>ACPI: PCI Interrupt Link [LKMO] (IRQs 20) *10
<4>ACPI: PCI Interrupt Link [LKSM] (IRQs 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [LTID] (IRQs 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
<6>ACPI: Power Resource [GFAN] (off)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 13 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post 
a report
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<6>pnp: 00:06: ioport range 0xa00-0xa0f has been reserved
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<4>audit(1185231300.408:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 3072k, 
total 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=41
<6>vesafb: protected mode interface info at c000:563b
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ACPI: PCI Interrupt Link [LKMO] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LKMO] -> GSI 20 (level, 
low) -> IRQ 177
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.38
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
<4>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP: Hash tables configured (established 32768 bind 32768)
<6>NET: Registered protocol family 1
<4>ACPI wakeup devices:
<4>USB0  MDM USB1 USB2 P0P1 LAN0 SLPB
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>Freeing unused kernel memory: 212k freed
<5>SCSI subsystem initialized
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with 
idebus=xx
<6>NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
<6>NFORCE3-150: chipset revision 165
<6>NFORCE3-150: not 100% native mode: will probe irqs later
<4>NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
<6>NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
<6>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
<6>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
<7>Probing IDE interface ide0...
<4>hda: ST9120821A, ATA DISK drive
<6>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 
0x904713/0x10008
<6>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<4>hdd: TSSTcorpCD/DVDW SN-S082D, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<7>ieee1394: Initialized config rom entry `ip1394'
<6>sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new driver usb-storage
<6>USB Mass Storage support registered.
<4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, 
low) -> IRQ 177
<7>PCI: Setting latency timer of device 0000:00:02.2 to 64
<6>ehci_hcd 0000:00:02.2: EHCI Host Controller
<6>ehci_hcd 0000:00:02.2: debug port 1
<3>ehci_hcd 0000:00:02.2: BIOS handoff failed (160, 1010001)
<4>ehci_hcd 0000:00:02.2: continuing after BIOS bug...
<6>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:02.2: irq 177, io mem 0xfebfdc00
<7>PCI: cache line size of 64 is not supported by device 0000:00:02.2
<6>ehci_hcd 0000:00:02.2: park 0
<6>ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 6 ports detected
<6>USB Universal Host Controller Interface driver v2.2
<6>hda: max request size: 1024KiB
<6>hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, 
UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
<6>hdd: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>usb 1-5: new high speed USB device using ehci_hcd and address 3
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on hda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding 2731008k swap on /dev/hda5.  Priority:42 extents:1
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on hda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Mon Jul 23 22:55:34 2007

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>checkproc: /sbin/udevd 2434
Starting D-BUS daemon<notice>startproc: execve (/usr/bin/dbus-daemon-1) 
[ /usr/bin/dbus-daemon-1 --system ], [ CONSOLE=/dev/console 
ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 
INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 
COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 
RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 
PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no 
ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon-1 ]
done
Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ 
/sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 
SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 
INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
SPLASHCFG= PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ 
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux 
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
SPLASHCFG= PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/sbin/klogd ]
done
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Stop Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
doneStarting PCMCIA <notice>startproc: execve (/sbin/cardmgr) [ 
/sbin/cardmgr ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux 
SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/sbin/cardmgr ]
done
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ 
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh 
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/sbin/resmgrd ]
Initializing random number generatordone
Starting resource managerdone
Symlinker [SuSE93]: Verlinke find: warning: you have specified the 
-maxdepth option after a non-option argument -type, but options are not 
positional (-maxdepth affects tests specified before it as well as those 
specified after it).  Please specify options before other arguments.

find: warning: you have specified the -mindepth option after a 
non-option argument -type, but options are not positional (-mindepth 
affects tests specified before it as well as those specified after it).  
Please specify options before other arguments.

... fertig.
Setting up network interfaces:
    lo       
    lo        IP address: 127.0.0.1/8  
done    modem0   
    modem0    Startmode is 'manual'
skippedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  
.  .  .  .done
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f 
/etc/rendezvous.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 
TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 
INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
Starting mdnsddone
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ 
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh 
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ 
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh 
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting hardware scan on bootStarting cupsddone
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ 
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh 
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting mail service (Postfix)<notice>startproc: execve 
(/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -x 
/usr/lib/powersave/scripts -a resmgr -v 3 ], [ CONSOLE=/dev/console 
ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 
INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 
COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 
RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 
PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no 
ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
done
loading ACPI modules (ac battery button fan processor thermal ) done
Starting powersaved  (accessing ACPI events over acpid) done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ 
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh 
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes 
], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh 
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ 
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh 
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 
PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N 
LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 
_=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o 
PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console 
ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 
INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 
COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 
RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 
PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no 
ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ 
LC_MONETARY= CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux 
SHELL=/bin/sh ROOTFS_FSCK=0 LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= 
INIT_VERSION=sysvinit-2.85 INIT=/sbin/init KDEROOTHOME=/root/.kdm 
REDIRECT=/dev/tty1 COLUMNS=128 
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin LC_MESSAGES= vga=0x317 
RUNLEVEL=5 LC_COLLATE= PWD=/ SPLASHCFG= LANG=de_DE.ISO-8859-1 
ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 
XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/twm 
LC_CTYPE=de_DE.ISO-8859-1 splash=silent SPLASH=no LC_TIME= 
ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Starting service kdmdone
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: 
ip6tables does not support state matching. Extended IPv6 support disabled.
SuSEfirewall2: Warning: no interface active
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs nfs splash
<notice>killproc: kill(3607,3)

Boot logging started on /dev/tty1(/dev/console) at Mon Jul 23 22:58:36 2007

Master Resource Control: previous runlevel: 5, switching to runlevel: 6
Shutting down the Firewall skipped
<notice>killproc: kill(5016,15)
<notice>killproc: kill(5554,15)
Shutting down cupsddone
<notice>killproc: kill(4916,2)
<notice>killproc: kill(5586,15)
Shutting down mdnsd done
<notice>killproc: kill(5133,15)
Shutting down service kdmdone
Shutting down Name Service Cache Daemondone
/etc/init.d/kbd stopdone
<notice>killproc: kill(5394,15)
Saving random seeddone
Umount SMB/ CIFS File Systems done
<notice>killproc: kill(5574,15)
<notice>killproc: kill(5501,15)
Shutting down HAL daemondone
Shutting down SMPPPDdone
<notice>killproc: kill(5512,15)
Shutting down acpiddone
Shutting down powersaved done
Unloading ACPI modules () done
<notice>killproc: kill(3827,15)
Shutting down CRON daemondone
<notice>killproc: kill(5456,15)
Symlinker [SuSE93]: L

thanks, but they're all wordwrapped now, so they would need a lot
of massaging to be able to be fed into `diff'.

There's a "Create a New Attachment: thingy down the bottom.  That would be
ideal, please.

sorry, I am currently in my company, I will answer you this evening asap!
-------- Original-Nachricht --------
Datum: Wed, 25 Jul 2007 16:12:48 -0700 (PDT)
Von: bugme-daemon@bugzilla.kernel.org
An: susemuse27@gmx.de
Betreff: [Bug 7706] PCMCIA bridge not working

> http://bugzilla.kernel.org/show_bug.cgi?id=7706
> 
> 
> 
> 
> 
> ------- Comment #8 from akpm@osdl.org  2007-07-25 16:18 -------
> thanks, but they're all wordwrapped now, so they would need a lot
> of massaging to be able to be fed into `diff'.
> 
> There's a "Create a New Attachment: thingy down the bottom.  That would be
> ideal, please.
> 
> 
> -- 
> Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
> ------- You are receiving this mail because: -------
> You reported the bug, or are watching the reporter.

hope it's better now! sorry for the delay

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #8 from akpm@osdl.org  2007-07-25 16:18 -------
> thanks, but they're all wordwrapped now, so they would need a lot
> of massaging to be able to be fed into `diff'.
>
> There's a "Create a New Attachment: thingy down the bottom.  That would be
> ideal, please.
>
>
>   
Cannot find map file.
No module symbols loaded - kernel modules not enabled.

Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.12-default (susanne@linux) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Mon Jul 23 22:38:52 CEST 2007
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
<4> BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
<4> BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<6>found SMP MP-table at 000ff780
<7>On node 0 totalpages: 130880
<7>  DMA zone: 4096 pages, LIFO batch:1
<7>  Normal zone: 126784 pages, LIFO batch:31
<7>  HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f7550
<7>ACPI: RSDT (v001 A M I  OEMRSDT  0x11000402 MSFT 0x00000097) @ 0x1ff40000
<7>ACPI: FADT (v001 A M I  OEMFACP  0x11000402 MSFT 0x00000097) @ 0x1ff40200
<7>ACPI: MADT (v001 A M I  OEMAPIC  0x11000402 MSFT 0x00000097) @ 0x1ff40390
<7>ACPI: OEMB (v001 A M I  OEMBIOS  0x11000402 MSFT 0x00000097) @ 0x1ff50040
<7>ACPI: DSDT (v001  A4K-U A4K-U001 0x00000001 INTL 0x02002026) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x4008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<4>Processor #0 15:4 APIC version 16
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<4>ACPI: BIOS IRQ0 pin2 override ignored.
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
<7>ACPI: IRQ9 used by override.
<7>ACPI: IRQ14 used by override.
<7>ACPI: IRQ15 used by override.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hda6 vga=0x317 selinux=0   resume=/dev/hda5  splash=silent
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order: 11, 32768 bytes)
<4>Detected 1795.229 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 509904k/523520k available (1964k kernel code, 13032k reserved, 664k data, 212k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 3593.44 BogoMIPS (lpj=1796721)
<6>Security Framework v1.0.0 initialized
<6>SELinux:  Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 1024K (64 bytes/line)
<7>CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: AMD Mobile AMD Athlon(tm) 64 Processor 3000+ stepping 0a
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 pin1=0 pin2=-1
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 4901k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20050309
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Embedded Controller [EC0] (gpe 37)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 17) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 19) *10
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *10
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 17) *11
<4>ACPI: PCI Interrupt Link [LUS0] (IRQs 20) *10
<4>ACPI: PCI Interrupt Link [LUS1] (IRQs 20) *11
<4>ACPI: PCI Interrupt Link [LUS2] (IRQs 20) *4
<4>ACPI: PCI Interrupt Link [LKLN] (IRQs 21) *0, disabled.
<4>ACPI: PCI Interrupt Link [LAUI] (IRQs 21) *5
<4>ACPI: PCI Interrupt Link [LKMO] (IRQs 20) *10
<4>ACPI: PCI Interrupt Link [LKSM] (IRQs 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [LTID] (IRQs 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
<6>ACPI: Power Resource [GFAN] (off)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 13 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<6>pnp: 00:06: ioport range 0xa00-0xa0f has been reserved
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<4>audit(1185231300.408:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 3072k, total 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=41
<6>vesafb: protected mode interface info at c000:563b
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ACPI: PCI Interrupt Link [LKMO] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LKMO] -> GSI 20 (level, low) -> IRQ 177
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.38
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
<4>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP: Hash tables configured (established 32768 bind 32768)
<6>NET: Registered protocol family 1
<4>ACPI wakeup devices: 
<4>USB0  MDM USB1 USB2 P0P1 LAN0 SLPB 
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>Freeing unused kernel memory: 212k freed
<5>SCSI subsystem initialized
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
<6>NFORCE3-150: chipset revision 165
<6>NFORCE3-150: not 100% native mode: will probe irqs later
<4>NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
<6>NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
<6>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
<6>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
<7>Probing IDE interface ide0...
<4>hda: ST9120821A, ATA DISK drive
<6>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
<6>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<4>hdd: TSSTcorpCD/DVDW SN-S082D, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<7>ieee1394: Initialized config rom entry `ip1394'
<6>sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new driver usb-storage
<6>USB Mass Storage support registered.
<4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 177
<7>PCI: Setting latency timer of device 0000:00:02.2 to 64
<6>ehci_hcd 0000:00:02.2: EHCI Host Controller
<6>ehci_hcd 0000:00:02.2: debug port 1
<3>ehci_hcd 0000:00:02.2: BIOS handoff failed (160, 1010001)
<4>ehci_hcd 0000:00:02.2: continuing after BIOS bug...
<6>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:02.2: irq 177, io mem 0xfebfdc00
<7>PCI: cache line size of 64 is not supported by device 0000:00:02.2
<6>ehci_hcd 0000:00:02.2: park 0
<6>ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 6 ports detected
<6>USB Universal Host Controller Interface driver v2.2
<6>hda: max request size: 1024KiB
<6>hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
<6>hdd: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>usb 1-5: new high speed USB device using ehci_hcd and address 3
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on hda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding 2731008k swap on /dev/hda5.  Priority:42 extents:1
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on hda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Mon Jul 23 22:55:34 2007

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>checkproc: /sbin/udevd 2434
Starting D-BUS daemon<notice>startproc: execve (/usr/bin/dbus-daemon-1) [ /usr/bin/dbus-daemon-1 --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon-1 ]
done
Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Stop Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
doneStarting PCMCIA <notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/cardmgr ]
done
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Initializing random number generatordone
Starting resource managerdone
Symlinker [SuSE93]: Verlinke find: warning: you have specified the -maxdepth option after a non-option argument -type, but options are not positional (-maxdepth affects tests specified before it as well as those specified after it).  Please specify options before other arguments.

find: warning: you have specified the -mindepth option after a non-option argument -type, but options are not positional (-mindepth affects tests specified before it as well as those specified after it).  Please specify options before other arguments.

... fertig.
Setting up network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
done    modem0    
    modem0    Startmode is 'manual'
skippedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/rendezvous.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
Starting mdnsddone
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting hardware scan on bootStarting cupsddone
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting mail service (Postfix)<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -x /usr/lib/powersave/scripts -a resmgr -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
done
loading ACPI modules (ac battery button fan processor thermal ) done
Starting powersaved  (accessing ACPI events over acpid) done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= INIT_VERSION=sysvinit-2.85 INIT=/sbin/init KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE= PWD=/ SPLASHCFG= LANG=de_DE.ISO-8859-1 ROOTFS_REALDEV=/lib/klibc//dev/hda6 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/twm LC_CTYPE=de_DE.ISO-8859-1 splash=silent SPLASH=no LC_TIME= ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Starting service kdmdone
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
SuSEfirewall2: Warning: no interface active
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs nfs splash
<notice>killproc: kill(3607,3)

Boot logging started on /dev/tty1(/dev/console) at Mon Jul 23 22:58:36 2007

Master Resource Control: previous runlevel: 5, switching to runlevel: 6
Shutting down the Firewall skipped
<notice>killproc: kill(5016,15)
<notice>killproc: kill(5554,15)
Shutting down cupsddone
<notice>killproc: kill(4916,2)
<notice>killproc: kill(5586,15)
Shutting down mdnsd done
<notice>killproc: kill(5133,15)
Shutting down service kdmdone
Shutting down Name Service Cache Daemondone
/etc/init.d/kbd stopdone
<notice>killproc: kill(5394,15)
Saving random seeddone
Umount SMB/ CIFS File Systems done
<notice>killproc: kill(5574,15)
<notice>killproc: kill(5501,15)
Shutting down HAL daemondone
Shutting down SMPPPDdone
<notice>killproc: kill(5512,15)
Shutting down acpiddone
Shutting down powersaved done
Unloading ACPI modules () done
<notice>killproc: kill(3827,15)
Shutting down CRON daemondone
<notice>killproc: kill(5456,15)
Symlinker [SuSE93]: L

Reply-To: akpm@linux-foundation.org

Sorry, but that is all wildly wordwrapped.

Please, use attachments.  Go to http://bugzilla.kernel.org/show_bug.cgi?id=7706
and use the "Create a New Attachment" link right at the bottom of the
page, thanks.

I have attached all those files as attachments as you advised now I do 
not know what I should do else...

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #11 from anonymous@kernel-bugs.osdl.org  2007-07-26 13:12
> -------
> Reply-To: akpm@linux-foundation.org
>
> Sorry, but that is all wildly wordwrapped.
>
> Please, use attachments.  Go to
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
> and use the "Create a New Attachment" link right at the bottom of the
> page, thanks.
>
>
>   

Created attachment 12165 [details]
test

hm, it worked for me.  

ho hum,  Perhaps you could email them to me (akpm@linux-foundation.org)
as attachments?

Thanks.

Created attachment 12167 [details]
boot-2-6-12.msg

Created attachment 12168 [details]
boot-2-6-13-rc1.msg

Created attachment 12169 [details]
messages-2-6-12.txt

Created attachment 12170 [details]
messages-2-6-13-rc1.txt

OK, so

 diff -u messages-2-6-12.txt messages-2-6-13-rc1.txt 

has this:

-kernel: cs: IO port probe 0xd400-0xd4ff: clean.
-kernel: cs: IO port probe 0xdc00-0xdcff: clean.
+kernel: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
+kernel: cs: IO port probe 0xc000-0xdfff: clean.
+kernel: pcmcia: parent PCI bridge Memory window: 0xfba00000 - 0xfeafffff
 kernel: cs: IO port probe 0xa00-0xaff: clean.

there were large changes in cs.c between 2.6.12 and 2.6.13-rc1, but they
all look to be fairly tame cleanups.  Perhaps something broke at the PCI
level.

I'll optimistically copy Dominik, but he's been quiet lately.

thank's a lot for your efforts!

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
> akpm@osdl.org changed:
>
>            What    |Removed                     |Added
> ----------------------------------------------------------------------------
>                  CC|                            |linux@brodo.de
>
>
>
>
> ------- Comment #19 from akpm@osdl.org  2007-07-26 14:46 -------
>
> OK, so
>
>  diff -u messages-2-6-12.txt messages-2-6-13-rc1.txt 
>
> has this:
>
> -kernel: cs: IO port probe 0xd400-0xd4ff: clean.
> -kernel: cs: IO port probe 0xdc00-0xdcff: clean.
> +kernel: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
> +kernel: cs: IO port probe 0xc000-0xdfff: clean.
> +kernel: pcmcia: parent PCI bridge Memory window: 0xfba00000 - 0xfeafffff
>  kernel: cs: IO port probe 0xa00-0xaff: clean.
>
> there were large changes in cs.c between 2.6.12 and 2.6.13-rc1, but they
> all look to be fairly tame cleanups.  Perhaps something broke at the PCI
> level.
>
> I'll optimistically copy Dominik, but he's been quiet lately.
>
>
>   

Susanne, thanks for doing such a good job capturing traces, this information was very useful.
Would you mind to try bisecting the two kernels that you've identified as working and non-working now? I will help you with this process, it is not too bad.
Do you have git installed?

yes, please tell me what I have to do :-)
I have git installed

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #21 from protasnb@gmail.com  2007-07-27 02:22 -------
> Susanne, thanks for doing such a good job capturing traces, this information
> was very useful.
> Would you mind to try bisecting the two kernels that you've identified as
> working and non-working now? I will help you with this process, it is not too
> bad.
> Do you have git installed?
>
>
>   

tried with cardmgr on two different laptops, using 2.6.22 and 2.6.23-rc1 kernels.
all works fine. a git bisect might help. please see comment #3 for an example on
how to use it.

do you have pcmciautils installed?  ie. do you have the command pccardctl?
what's the output from 'cardctl ident' or 'pccardctl ident' with the card
installed? please use the non-working 2.6.18 for this.

pccarctl ident says:
linux-s:/home/susanne/video # pccardctl ident
Socket 0:
  product info: "Conceptronic MODEM", "56CLS", "5.41", ""
  manfid: 0x014e, 0x0088
  function: 2 (serial)
(Kernel: Suse10.2-default 2.6.18.2-34)

I will compile a 2.6.23-rc1 and come back to you with feedback asap
thanks a lot


bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #23 from daniel.ritz@gmx.ch  2007-08-02 09:22 -------
> tried with cardmgr on two different laptops, using 2.6.22 and 2.6.23-rc1
> kernels.
> all works fine. a git bisect might help. please see comment #3 for an example
> on
> how to use it.
>
> do you have pcmciautils installed?  ie. do you have the command pccardctl?
> what's the output from 'cardctl ident' or 'pccardctl ident' with the card
> installed? please use the non-working 2.6.18 for this.
>
>
>   

so you have pcmciautils _and_ pcmcia-cs installed then? this could be the
actual problem.

what happens if you boot with 2.6.18, insert the card and then
do a 'modprobe serial_cs'? what does dmesg look after this?

I did
insert the card, then
linux-s:/home/susanne # modprobe serial_cs
linux-s:/home/susanne # dmesg
and dmesg says:
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xfba00000-0xfeafffff: excluding 0xfbd10000-0xfc01ffff 
0xfc330000-0xfd27ffff 0xfdec0000-0xfe1cffff 0xfe7f0000-0xfeafffff
pcmcia: registering new device pcmcia0.0
the complete dmesg if needed is here:   http://phpfi.com/254290

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #25 from daniel.ritz@gmx.ch  2007-08-03 16:44 -------
> so you have pcmciautils _and_ pcmcia-cs installed then? this could be the
> actual problem.
>
> what happens if you boot with 2.6.18, insert the card and then
> do a 'modprobe serial_cs'? what does dmesg look after this?
>
>
>   

so there's no warning about IOCTL usage which means that cardmgr does not do
anything. also it seems that resources are not set up so the PCMCIA layer
does not bind the driver to the device. you could figure by doing a
  cat /sys/class/pcmcia_socket/*/available_resources_setup_done

you could also compile the kernel with CONFIG_PCMCIA_DEBUG=y and put
the line 'options pcmcia pc_debug=4' in your /etc/modprobe.conf so you
get the debug messages. also try to run 'pcmcia-socket-startup' from the
pcmciautils package before you plug the card.

I followed your recommendations:

cat /sys/class/pcmcia_socket/*/available_resources_setup_done
returned "yes"
I compiled 2.6.23-rc1 with CONFIG_PCMCIA_DEBUG=y, added 'options pcmcia pc_debug=4' to /etc/modprobe.conf
and ran 'pcmcia-socket-startup' before plugging the card - no success so far.

...............
pccard: PCMCIA card inserted into slot 0
ds: ds_event(0x000004, 0, 0xc15d8c28)
cs: memory probe 0xfba00000-0xfeafffff: excluding 0xfbd10000-0xfc01ffff 0xfc330000-0xfd27ffff 0xfdec0000-0xfe1cffff 0xfe7f0000-0xfeafffff
ds: adding device to 0, function 0
ds: devname is pcmcia0.0
ds: creating config_t for 0.0
pcmcia: registering new device pcmcia0.0
ds: registering driver serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
..........

the entire dmesg is at http://phpfi.com/254686
best regards
 


bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #27 from daniel.ritz@gmx.ch  2007-08-04 09:32 -------
> so there's no warning about IOCTL usage which means that cardmgr does not do
> anything. also it seems that resources are not set up so the PCMCIA layer
> does not bind the driver to the device. you could figure by doing a
>   cat /sys/class/pcmcia_socket/*/available_resources_setup_done
>
> you could also compile the kernel with CONFIG_PCMCIA_DEBUG=y and put
> the line 'options pcmcia pc_debug=4' in your /etc/modprobe.conf so you
> get the debug messages. also try to run 'pcmcia-socket-startup' from the
> pcmciautils package before you plug the card.
>
>
>   

Reply-To: daniel.ritz-ml@swissonline.ch

> pccard: PCMCIA card inserted into slot 0
> ds: ds_event(0x000004, 0, 0xc15d8c28)
> cs: memory probe 0xfba00000-0xfeafffff: excluding 0xfbd10000-0xfc01ffff
> 0xfc330000-0xfd27ffff 0xfdec0000-0xfe1cffff 0xfe7f0000-0xfeafffff
> ds: adding device to 0, function 0
> ds: devname is pcmcia0.0
> ds: creating config_t for 0.0
> pcmcia: registering new device pcmcia0.0
> ds: registering driver serial_cs
> ds: trying to match 0.0 to serial_cs
> ds: trying to match 0.0 to serial_cs
> ds: trying to match 0.0 to serial_cs
> ds: trying to match 0.0 to serial_cs
> ds: trying to match 0.0 to serial_cs
> ..........
> 
> the entire dmesg is at http://phpfi.com/254686

ok, the things doesn't look to bad. resources are set up and it tries
to bind the card to serial_cs. but here it should go one with either
an error message or a registered serial port. but it doesn't do so.

so it's an unchecked return value somewhere so that pcmcia thinks
everything is ok. looks like uart_configure_port() in serial_core.c
fails silently...i need to so some debug patch for serial_core.c,
serial_cs.c and 8250.c...but no time before saturday i think...

meanwhile you could play with your config.opts and try to include/exclude
some port ranges...mine are:
	include port 0x100-0x3af
	include port 0x3e0-0x4ff
	include port 0x820-0x8ff
	include port 0xc00-0xcf7
also try to exclude the ports initially reported in dmesg like
	cs: IO port probe bla-bla: clean
one at a time. you can also do that via sysfs by just using
	echo -n "0x100-0x3af" > /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
to add a new io range or
	echo -n "- 0x100-0x3af" > /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
to remove an io range. just eject/insert the card to test new settings.
to display the settings just use 'cat' on the file.

for starters try with the ranges reported by the working kernel...

> pccard: PCMCIA card inserted into slot 0
> ds: ds_event(0x000004, 0, 0xc15d8c28)
> cs: memory probe 0xfba00000-0xfeafffff: excluding 0xfbd10000-0xfc01ffff
> 0xfc330000-0xfd27ffff 0xfdec0000-0xfe1cffff 0xfe7f0000-0xfeafffff
> ds: adding device to 0, function 0
> ds: devname is pcmcia0.0
> ds: creating config_t for 0.0
> pcmcia: registering new device pcmcia0.0
> ds: registering driver serial_cs
> ds: trying to match 0.0 to serial_cs
> ds: trying to match 0.0 to serial_cs
> ds: trying to match 0.0 to serial_cs
> ds: trying to match 0.0 to serial_cs
> ds: trying to match 0.0 to serial_cs
> ..........
> 
> the entire dmesg is at http://phpfi.com/254686

ok, the things doesn't look to bad. resources are set up and it tries
to bind the card to serial_cs. but here it should go one with either
an error message or a registered serial port. but it doesn't do so.

so it's an unchecked return value somewhere so that pcmcia thinks
everything is ok. looks like uart_configure_port() in serial_core.c
fails silently...i need to so some debug patch for serial_core.c,
serial_cs.c and 8250.c...but no time before saturday i think...

meanwhile you could play with your config.opts and try to include/exclude
some port ranges...mine are:
	include port 0x100-0x3af
	include port 0x3e0-0x4ff
	include port 0x820-0x8ff
	include port 0xc00-0xcf7
also try to exclude the ports initially reported in dmesg like
	cs: IO port probe bla-bla: clean
one at a time. you can also do that via sysfs by just using
	echo -n "0x100-0x3af" > /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
to add a new io range or
	echo -n "- 0x100-0x3af" > /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
to remove an io range. just eject/insert the card to test new settings.
to display the settings just use 'cat' on the file.

for starters try with the ranges reported by the working kernel...

-------------------------------------------------------

I adjusted config.opts in terms of io-ports and those are clean now, no 
more "excluding...":
........................................
pcmcia: registering new device pcmcia0.0
cs: IO port probe 0x100-0x2f7: clean.
cs: IO port probe 0x300-0x3af: clean.
cs: IO port probe 0x3e0-0x3ff: clean.
cs: IO port probe 0x4d8-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
ds: re-scanning socket 0
ds: update device information for 0.0
ds: re-scanning socket 0
ds: update device information for 0.0
ds: registering driver serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs...
........................................

that job was easy...
but memory probe still returns the usual
..................................................
cs: memory probe 0xfba00000-0xfeafffff: excluding 0xfbd10000-0xfc01ffff 
0xfc330000-0xfd27ffff 0xfdec0000-0xfe1cffff 0xfe7f0000-0xfeafffff
..................................................

changing the memorysettings in config.opts accordingly doesn't have any 
influence...
thanks a lot so far for your efforts!


bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
> ------- Comment #30 from daniel.ritz@gmx.ch  2007-08-07 16:08 -------
>   
>> pccard: PCMCIA card inserted into slot 0
>> ds: ds_event(0x000004, 0, 0xc15d8c28)
>> cs: memory probe 0xfba00000-0xfeafffff: excluding 0xfbd10000-0xfc01ffff
>> 0xfc330000-0xfd27ffff 0xfdec0000-0xfe1cffff 0xfe7f0000-0xfeafffff
>> ds: adding device to 0, function 0
>> ds: devname is pcmcia0.0
>> ds: creating config_t for 0.0
>> pcmcia: registering new device pcmcia0.0
>> ds: registering driver serial_cs
>> ds: trying to match 0.0 to serial_cs
>> ds: trying to match 0.0 to serial_cs
>> ds: trying to match 0.0 to serial_cs
>> ds: trying to match 0.0 to serial_cs
>> ds: trying to match 0.0 to serial_cs
>> ..........
>>
>> the entire dmesg is at http://phpfi.com/254686
>>     
>
> ok, the things doesn't look to bad. resources are set up and it tries
> to bind the card to serial_cs. but here it should go one with either
> an error message or a registered serial port. but it doesn't do so.
>
> so it's an unchecked return value somewhere so that pcmcia thinks
> everything is ok. looks like uart_configure_port() in serial_core.c
> fails silently...i need to so some debug patch for serial_core.c,
> serial_cs.c and 8250.c...but no time before saturday i think...
>
> meanwhile you could play with your config.opts and try to include/exclude
> some port ranges...mine are:
>         include port 0x100-0x3af
>         include port 0x3e0-0x4ff
>         include port 0x820-0x8ff
>         include port 0xc00-0xcf7
> also try to exclude the ports initially reported in dmesg like
>         cs: IO port probe bla-bla: clean
> one at a time. you can also do that via sysfs by just using
>         echo -n "0x100-0x3af" >
> /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
> to add a new io range or
>         echo -n "- 0x100-0x3af" >
> /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
> to remove an io range. just eject/insert the card to test new settings.
> to display the settings just use 'cat' on the file.
>
> for starters try with the ranges reported by the working kernel...
>
> -------------------------------------------------------
>
>
>   

Created attachment 12349 [details]
serial_cs debugging patch

please apply to your current 2.6.23-rcX config and retry.
post full dmesg. thx

here it is..
I started with card inserted
greets and thanks

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #32 from daniel.ritz@gmx.ch  2007-08-11 16:13 -------
> Created an attachment (id=12349)
>  --> (http://bugzilla.kernel.org/attachment.cgi?id=12349&action=view)
> serial_cs debugging patch
>
> please apply to your current 2.6.23-rcX config and retry.
> post full dmesg. thx
>
>
>   
Linux version 2.6.23-rc2-cs-default (susanne@linux-s) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Sun Aug 12 12:57:09 CEST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
 BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
 BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 130880) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   130880
  HighMem    130880 ->   130880
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   130880
On node 0 totalpages: 130880
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 990 pages used for memmap
  Normal zone: 125794 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F7550, 0014 (r0 ACPIAM)
ACPI: RSDT 1FF40000, 0030 (r1 A M I  OEMRSDT  11000402 MSFT       97)
ACPI: FACP 1FF40200, 0081 (r1 A M I  OEMFACP  11000402 MSFT       97)
ACPI: DSDT 1FF40400, 64E7 (r1  A4K-U A4K-U001        1 INTL  2002026)
ACPI: FACS 1FF50000, 0040
ACPI: APIC 1FF40390, 0068 (r1 A M I  OEMAPIC  11000402 MSFT       97)
ACPI: OEMB 1FF50040, 0041 (r1 A M I  OEMBIOS  11000402 MSFT       97)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists in Zone order.  Total pages: 129858
Kernel command line: root=/dev/hda8 vga=0x317 selinux=0   resume=/dev/hda5  splash=silent
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1795.360 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512440k/523520k available (1766k kernel code, 10460k reserved, 769k data, 216k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe14000 - 0xfffff000   (1964 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
    lowmem  : 0xc0000000 - 0xdff40000   ( 511 MB)
      .init : 0xc0382000 - 0xc03b8000   ( 216 kB)
      .data : 0xc02b9bb5 - 0xc037a364   ( 769 kB)
      .text : 0xc0100000 - 0xc02b9bb5   (1766 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3593.29 BogoMIPS (lpj=7186586)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
CPU0: AMD Mobile AMD Athlon(tm) 64 Processor 3000+ stepping 0a
Total of 1 processors activated (3593.29 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Bus #03 (-#06) is hidden behind  bridge #02 (-#03) (try 'pci=assign-busses')
Please report the result to <bk@suse.de> to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 19) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 17) *11
ACPI: PCI Interrupt Link [LUS0] (IRQs 20) *10
ACPI: PCI Interrupt Link [LUS1] (IRQs 20) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 20) *4
ACPI: PCI Interrupt Link [LKLN] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LAUI] (IRQs 21) *5
ACPI: PCI Interrupt Link [LKMO] (IRQs 20) *10
ACPI: PCI Interrupt Link [LKSM] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
pnp: 00:07: ioport range 0xa00-0xa0f has been reserved
pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: 00:09: iomem range 0xff780000-0xff7bffff has been reserved
pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0c: iomem range 0x100000-0x1fffffff could not be reserved
PCI: Failed to allocate mem resource #10:4000000@0 for 0000:02:01.0
PCI: Bus 3, cardbus bridge: 0000:02:01.0
  IO window: 0000c000-0000c0ff
  IO window: 0000c400-0000c4ff
  PREFETCH window: 30000000-33ffffff
PCI: Bridge: 0000:00:0a.0
  IO window: c000-dfff
  MEM window: fba00000-feafffff
  PREFETCH window: 30000000-33ffffff
PCI: Bridge: 0000:00:0b.0
  IO window: 9000-bfff
  MEM window: fb900000-fb9fffff
  PREFETCH window: db800000-eb7fffff
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2772k freed
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1186926083.516:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
0000:00:02.0 OHCI: BIOS handoff failed (BIOS bug ?) 000007b4
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 3072k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:563b
vesafb: pmi: set display start = c00c56a9, set palette = c00c56e3
vesafb: pmi: ports = b010 b016 b054 b038 b03c b05c b000 b004 b0b0 b0b2 b0b4 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0: autoconf (0x03f8, 0x00000000): IER test failed (0f, 0f) type=unknown
ttyS1: autoconf (0x02f8, 0x00000000): iir=3 iir1=6 iir2=6 type=16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2: autoconf (0x03e8, 0x00000000): IER test failed (0f, 0f) type=unknown
ttyS3: autoconf (0x02e8, 0x00000000): IER test failed (0f, 0f) type=unknown
ACPI: PCI Interrupt Link [LKMO] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LKMO] -> GSI 20 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:06.1 disabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input2
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 216k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: Invalid PBLK length [0]
ACPI: Thermal Zone [THRM] (50 C)
NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
NFORCE3-150: chipset revision 165
NFORCE3-150: not 100% native mode: will probe irqs later
NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: ST9120821A, ATA DISK drive
hda: selected mode 0x45
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
Probing IDE interface ide1...
hdd: TSSTcorpCD/DVDW SN-S082D, ATAPI CD/DVD-ROM drive
hdd: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: Fan [FN00] (on)
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
lp0: using parport0 (interrupt-driven).
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver snd-usb-audio
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 17, io mem 0xfebfdc00
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 17, io mem 0xfebfb000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.102
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 20 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 17, io mem 0xfebfc000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hdd: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hub 3-0:1.0: 3 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 128M @ 0xf0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 1-5: configuration #1 chosen from 1 choice
PCI: Enabling device 0000:00:06.0 (0001 -> 0003)
ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:06.0 to 64
usb 3-2: new low speed USB device using ohci_hcd and address 2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usb 3-2: configuration #1 chosen from 1 choice
intel8x0_measure_ac97_clock: measured 55381 usecs
intel8x0: clocking to 47469
Yenta: CardBus bridge found at 0000:02:01.0 [1043:1987]
Yenta: ISA IRQ mask 0x0438, PCI irq 16
Socket status: 30000410
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
cs: IO port probe 0xc000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xfba00000 - 0xfeafffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
sdhci: SDHCI controller found at 0000:02:01.2 [1180:0822] (rev 17)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17
ACPI: PCI Interrupt 0000:02:01.2[C] -> Link [LNKD] -> GSI 17 (level, low) -> IRQ 19
mmc0: SDHCI at 0xfeaff800 irq 19 DMA
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[feaff000-feaff7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.1-2
usbcore: registered new interface driver usbhid
/usr/src/linux-2.6.23-rc2-cs/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
pccard: PCMCIA card inserted into slot 0
ds: ds_event(0x000004, 0, 0xc16b3028)
cs: memory probe 0xfba00000-0xfeafffff: excluding 0xfbd10000-0xfc01ffff 0xfc330000-0xfd27ffff 0xfdec0000-0xfe1cffff 0xfe7f0000-0xfeafffff
ds: adding device to 0, function 0
ds: devname is pcmcia0.0
ds: creating config_t for 0.0
pcmcia: registering new device pcmcia0.0
cs: IO port probe 0x100-0x2f7: clean.
cs: IO port probe 0x300-0x3af: clean.
cs: IO port probe 0x3e0-0x3ff: clean.
cs: IO port probe 0x4d8-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
ds: re-scanning socket 0
ds: update device information for 0.0
ds: re-scanning socket 0
ds: update device information for 0.0
ds: registering driver serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: skipping FUNC_ID match for 0.0 until userspace interaction
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: trying to match 0.0 to serial_cs
ds: skipping FUNC_ID match for 0.0 until userspace interaction
ds: matched 0.0 to serial_cs
ds: trying to bind 0.0 to serial_cs
serial_cs: trying serial8250_register_port() with IO at 0xc3f8, irq 3
ttyS0: autoconf (0xc3f8, 0x00000000): IER test failed (0f, 0f) type=unknown
Adding 2731008k swap on /dev/hda5.  Priority:-1 extents:1 across:2731008k
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000323050e]
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input7
ACPI: Power Button (CM) [PWRB]
powernow-k8: Found 1 Mobile AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.00.00)
powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xa
powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x18
powernow-k8: ph2 null fid transition 0xa
audit(1186918926.732:2): audit_pid=3119 old=0 by auid=4294967295
Marking TSC unstable due to: cpufreq changes.
Time: acpi_pm clocksource has been installed.
Clocksource tsc unstable (delta = -277808361 ns)

Reply-To: pcmcia@arm.linux.org.uk

On Sun, Aug 12, 2007 at 04:53:43AM -0700, bugme-daemon@bugzilla.kernel.org wrote:
> ds: skipping FUNC_ID match for 0.0 until userspace interaction
> ds: matched 0.0 to serial_cs
> ds: trying to bind 0.0 to serial_cs
> serial_cs: trying serial8250_register_port() with IO at 0xc3f8, irq 3
> ttyS0: autoconf (0xc3f8, 0x00000000): IER test failed (0f, 0f) type=unknown

That means "this doesn't respond like a serial port" - the interrupt
enable register appears to be ignoring writes, or something is
interfering with reads from the register.

looks like it's not talking to the hardware at all. i'm a bit lost about it.
please do the 'git bisect' stuff as described in comment #3...

Susanne, let's try doing the bisect. I am preparing "better instructions" on this, so if we go through the process together it might help to make this document really useful for the future. There are some culprits that you might run into but most of the times this is a pretty straightforward process. As soon as you find an obstacle, just update this bugzilla. This will be great for making instructions, because nobody ever report what they went through to get bisecting done :)

okidoki, so I will try to find the culprit bisecting between 2.6.12 and 
2.6.13-rc1 in my Suse 9.3.
If I run into trouble I will post it, be sure *lol*
thanks

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #36 from protasnb@gmail.com  2007-08-12 10:33 -------
> Susanne, let's try doing the bisect. I am preparing "better instructions" on
> this, so if we go through the process together it might help to make this
> document really useful for the future. There are some culprits that you might
> run into but most of the times this is a pretty straightforward process. As
> soon as you find an obstacle, just update this bugzilla. This will be great
> for
> making instructions, because nobody ever report what they went through to get
> bisecting done :)
>
>
>   

hi,
I'm in process bisecting between 2.6.12 and 2.6.13-rc1.
towards the end of compilation of the 3rd trial I get an error message:

................................
  CC      arch/i386/lib/bitops.o
  AS      arch/i386/lib/checksum.o
  CC      arch/i386/lib/delay.o
  AS      arch/i386/lib/getuser.o
  CC      arch/i386/lib/memcpy.o
  AS      arch/i386/lib/putuser.o
  CC      arch/i386/lib/strstr.o
  CC      arch/i386/lib/usercopy.o
  AR      arch/i386/lib/lib.a
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
drivers/built-in.o(.text+0x79dcd): In function `psmouse_attr_set_protocol':
/usr/src/linux-2.6/drivers/input/mouse/psmouse-base.c:1124: undefined 
reference to `serio_unregister_child_port'
make[1]: *** [.tmp_vmlinux1] Fehler 1
make: *** [_all] Fehler 2
susanne@linux:/usr/src/linux-2.6>     
.................................
I noticed during all trials my USB mouse is not working so I have to use 
the touchpad...
another info: I'm using a builddirectory
please advise how I shall go further
thanks
Susanne



bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #36 from protasnb@gmail.com  2007-08-12 10:33 -------
> Susanne, let's try doing the bisect. I am preparing "better instructions" on
> this, so if we go through the process together it might help to make this
> document really useful for the future. There are some culprits that you might
> run into but most of the times this is a pretty straightforward process. As
> soon as you find an obstacle, just update this bugzilla. This will be great
> for
> making instructions, because nobody ever report what they went through to get
> bisecting done :)
>
>
>   

Aha, ok you hit the nasty one, which is talked about here http://www.kernel.org/pub/software/scm/git/docs/v1.0.13/howto/isolate-bugs-with-bisect.txt
Towards the end, read:
It really works wonderfully well, except for the case where there was 
_another_ commit that broke something in between, like introduced some 
stupid compile error. In that case you should not mark that commit good or 
bad: you should try to find another commit close-by, and do a "git reset 
--hard <newcommit>" to try out _that_ commit instead, and then test that 
instead (and mark it good or bad).

You can do "git bisect visualize" while you do all this to see what's 
going on by starting up gitk on the bisection range.

How about that? git-reset --hard <some close commit here>, then git bisect visualize - and see what happens...

got it - continue bisecting...
greets

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #39 from protasnb@gmail.com  2007-08-13 18:18 -------
> Aha, ok you hit the nasty one, which is talked about here
>
> http://www.kernel.org/pub/software/scm/git/docs/v1.0.13/howto/isolate-bugs-with-bisect.txt
> Towards the end, read:
> It really works wonderfully well, except for the case where there was 
> _another_ commit that broke something in between, like introduced some 
> stupid compile error. In that case you should not mark that commit good or 
> bad: you should try to find another commit close-by, and do a "git reset 
> --hard <newcommit>" to try out _that_ commit instead, and then test that 
> instead (and mark it good or bad).
>
> You can do "git bisect visualize" while you do all this to see what's 
> going on by starting up gitk on the bisection range.
>
> How about that? git-reset --hard <some close commit here>, then git bisect
> visualize - and see what happens...
>
>
>   

result of bisecting:

susanne@linux:/usr/src/linux-2.6> git bisect good
3c29976a6469b81a7858812dc2d4b8430d74004a is first bad commit
commit 3c29976a6469b81a7858812dc2d4b8430d74004a
Author: Dominik Brodowski <linux@dominikbrodowski.net>
Date:   Mon Jun 27 16:28:46 2005 -0700

    [PATCH] pcmcia: mark parent bridge windows as resources available 
for PCMCIA devices

    Automatically mark the parent PCI-PCI bridge windows as resources 
available
    for PCMCIA usage.

    Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
    Signed-off-by: Andrew Morton <akpm@osdl.org>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>

:040000 040000 72d9bc4cfe1923eec1f6c2d3a892067109b527c5 
7a80e3fec6bc5eb725fa616ebe35b91d08096498 M      drivers
:040000 040000 a13583e8df7118e216be342af6858a4fc0a56415 
beca2b02218ee57ae14e846be982e0d01bcf50d4 M      include
susanne@linux:/usr/src/linux-2.6>

hope this helps! :-)
greets
Susanne



bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #39 from protasnb@gmail.com  2007-08-13 18:18 -------
> Aha, ok you hit the nasty one, which is talked about here
>
> http://www.kernel.org/pub/software/scm/git/docs/v1.0.13/howto/isolate-bugs-with-bisect.txt
> Towards the end, read:
> It really works wonderfully well, except for the case where there was 
> _another_ commit that broke something in between, like introduced some 
> stupid compile error. In that case you should not mark that commit good or 
> bad: you should try to find another commit close-by, and do a "git reset 
> --hard <newcommit>" to try out _that_ commit instead, and then test that 
> instead (and mark it good or bad).
>
> You can do "git bisect visualize" while you do all this to see what's 
> going on by starting up gitk on the bisection range.
>
> How about that? git-reset --hard <some close commit here>, then git bisect
> visualize - and see what happens...
>
>
>   

Susanne, it was a marvelous job! Thank you!

:-)
thanks a lot

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #42 from protasnb@gmail.com  2007-08-15 07:40 -------
> Susanne, it was a marvelous job! Thank you!
>
>
>   

Dominik, can you give us a hand? Susanne graciously did her part, can you look in this now and advise - We are "losing" the bus and resources all messed up on that laptop.
Thanks.

thanks for bisecting. so it's a resource problem after all. the change you
identified itself looks ok. the problem is that either some other device is
on those i/o addresses, or i/o cycles are not forwarded correctly.
- could you post full 'lspci -vvv' output (all devices)?
- post the output of
    cat /sys/devices/pci*/*/yenta_registers
  with the card inserted
- do those two:
    echo -n "- 0xc000 - 0xdfff" > /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
    echo -n "0xd400 - 0xd4ff" > /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
  before inserting the card

so first item is in attachment "lspci-Asus-A4K"
second one is in "yenta_registers"
and third one, after putting in those two commands:

    echo -n "- 0xc000 - 0xdfff" >
/sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
    echo -n "0xd400 - 0xd4ff" >
/sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io


 dmesg says:
"............
cs: IO port probe 0xd400-0xd4ff: clean.
pccard: PCMCIA card inserted into slot 0
linux-s:/home/susanne #                  "

I did this now in my prod-system Suse 10.2 with Susekernel 2.6.18-2-34 
cause it's just busy, if I should repeat the last two items with that  
specially debugging-patched 2.6.23-rc2 please let me know
greets

bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #45 from daniel.ritz@gmx.ch  2007-08-18 09:19 -------
> thanks for bisecting. so it's a resource problem after all. the change you
> identified itself looks ok. the problem is that either some other device is
> on those i/o addresses, or i/o cycles are not forwarded correctly.
> - could you post full 'lspci -vvv' output (all devices)?
> - post the output of
>     cat /sys/devices/pci*/*/yenta_registers
>   with the card inserted
> - do those two:
>     echo -n "- 0xc000 - 0xdfff" >
> /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
>     echo -n "0xd400 - 0xd4ff" >
> /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
>   before inserting the card
>
>
>   
linux-s:/home/susanne # lspci -vvv
00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [44] HyperTransport: Slave or Primary Interface
                Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
                Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 0: MLWI=16bit DwFcIn- MLWO=8bit DwFcOut- LWI=16bit DwFcInEn- LWO=8bit DwFcOutEn-
                Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
                Revision ID: 1.03
                Link Frequency 0: 400MHz
                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
                Link Frequency 1: 200MHz
                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
                Prefetchable memory behind bridge Upper: 00-00
                Bus Number: 00
        Capabilities: [c0] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x8

00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev f6)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 0
        Region 4: I/O ports at 5000 [size=64]
        Region 5: I/O ports at 5040 [size=64]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 185
        Region 0: Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin B routed to IRQ 185
        Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin C routed to IRQ 185
        Region 0: Memory at febfdc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1983
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (500ns min, 1250ns max)
        Interrupt: pin A routed to IRQ 193
        Region 0: I/O ports at e400 [size=256]
        Region 1: I/O ports at e080 [size=128]
        Region 2: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.1 Modem: nVidia Corporation nForce3 Audio (rev a2) (prog-if 00 [Generic])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1856
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 185
        Region 0: I/O ports at e800 [disabled] [size=256]
        Region 1: I/O ports at ec00 [disabled] [size=128]
        Region 2: Memory at febff000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Region 4: I/O ports at ffa0 [size=16]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=06, sec-latency=128
        I/O behind bridge: 0000c000-0000dfff
        Memory behind bridge: fba00000-feafffff
        Prefetchable memory behind bridge: 30000000-31ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00009000-0000bfff
        Memory behind bridge: fb900000-fb9fffff
        Prefetchable memory behind bridge: db800000-eb7fffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Capabilities: [80] HyperTransport: Host or Secondary Interface
                !!! Possibly incomplete decoding
                Command: WarmRst+ DblEnd-
                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
                Link Config: MLWI=16bit MLWO=16bit LWI=8bit LWO=16bit
                Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1942
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 255 (2000ns min), Cache Line Size: 256 bytes
        Interrupt: pin A routed to IRQ 201
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at b000 [size=256]
        Region 2: Memory at fb9f0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at fb9c0000 [disabled] [size=128K]
        Capabilities: [58] AGP version 3.0
                Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x8
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
        Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 256 bytes
        Interrupt: pin A routed to IRQ 209
        Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K]
        Region 1: I/O ports at d800 [size=256]
        Expansion ROM at feac0000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [50] Vital Product Data

02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
        Subsystem: ASUSTeK Computer Inc. Asus A4K and Z81K notebooks, possibly others ( mid-2005 machines )
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 177
        Region 0: Memory at fd200000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 30000000-31fff000 (prefetchable)
        Memory window 1: fc600000-fd1ff000
        I/O window 0: 0000c000-0000c0ff
        I/O window 1: 0000c400-0000c4ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max)
        Interrupt: pin B routed to IRQ 209
        Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME+

02:01.2 Generic system peripheral [Class 0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin C routed to IRQ 201
        Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1987
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 10
        Region 0: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

linux-s:/home/susanne # cat /sys/devices/pci0000:00/0000:00:0a.0/0000:02:01.0/yenta_registers
CB registers:
00: 00000000 00000006 30000419 00000000
10: 00000422 00000000 00000000 00000000
20: 00000000

ExCA registers:
00: 83 7f d1 40 00 08 01 00 - 00 00 01 00 00 00 01 00
10: 00 0a 00 8a 00 06 00 00 - 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 - 00 00 0f 00 00 00 00 00
40: fb 00 00 00 00
linux-s:/home/susanne #      

not good. the bridge doesn't get configured properly:

> ExCA registers:
> 00: 83 7f d1 40 00 08 01 00 - 00 00 01 00 00 00 01 00
                                            ^^^^^^^^^^^
                                            I/O win 1, not config'd
                                ^^^^^^^^^^^
                                that's I/O window 0, not configured
                        ^^
                        control register: no i/o enabled
> 10: 00 0a 00 8a 00 06 00 00 - 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 - 00 00 0f 00 00 00 00 00
> 40: fb 00 00 00 00
> linux-s:/home/susanne #      
> 

but the serial driver gets a port number back and tries to probe for a
valid device. i'm looking through the code now, but i haven't found
the problem so far...need some time.

-------------------------------------------------------

Has it been any progress with the bug, any updates? - Thanks.

no further messages since comment #47 2007-08-09 (see below):

thanks for asking
greets
Susanne
_____________________________________________________________________________
------- Comment #47 from daniel.ritz@gmx.ch  2007-08-19 14:02 -------
not good. the bridge doesn't get configured properly:

 > > ExCA registers:
 > > 00: 83 7f d1 40 00 08 01 00 - 00 00 01 00 00 00 01 00
                                            ^^^^^^^^^^^
                                            I/O win 1, not config'd
                                ^^^^^^^^^^^
                                that's I/O window 0, not configured
                        ^^
                        control register: no i/o enabled
 > > 10: 00 0a 00 8a 00 06 00 00 - 00 00 00 00 00 00 00 00
 > > 20: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
 > > 30: 00 00 00 00 00 00 00 00 - 00 00 0f 00 00 00 00 00
 > > 40: fb 00 00 00 00
 > > linux-s:/home/susanne #     
 > >

but the serial driver gets a port number back and tries to probe for a
valid device. i'm looking through the code now, but i haven't found
the problem so far...need some time.
____________________________________________________________________________



bugme-daemon@bugzilla.kernel.org schrieb:
> http://bugzilla.kernel.org/show_bug.cgi?id=7706
>
>
>
>
>
> ------- Comment #48 from protasnb@gmail.com  2008-04-15 00:53 -------
> Has it been any progress with the bug, any updates? - Thanks.
>
>
>   

Closing out old stale bugs.

If this bug is still present with a recent kernel please re-open