7427 – yenta_socket error -12

Bug 7427 - yenta_socket error -12

Summary: yenta_socket error -12

Status:	CLOSED PATCH_ALREADY_AVAILABLE

Alias:	None

Product:	Drivers
Classification:	Unclassified
Component:	PCMCIA (show other bugs)
Hardware:	i386 Linux

Importance:	P2 normal
Assignee:	Dominik Brodowski

URL:
Keywords:

Depends on:
Blocks:

Reported:	2006-10-27 11:30 UTC by Frederik Mattelaere
Modified:	2006-11-07 18:55 UTC (History)
CC List:	4 users (show)

See Also:
Kernel Version:	2.6.16.21-0.25-default
Subsystem:
Regression:	---
Bisected commit-id:

Attachments
Add an attachment (proposed patch, testcase, etc.)

Description Frederik Mattelaere 2006-10-27 11:30:04 UTC

Hi,
I hope this post is correctly here at this page! The problem I have with the 
new version of the kernel updated by the suse linux 10.1 operating system is 
that I have errors with the yenta_socket (PCMCIA). Below this mail I did copy 
the entire page that I did get with the bash commando dmesg:
The kernel version I use = 2.6.16.21-0.25-default
The PCMCIA-autils version =012-11
The specific error I get with this kernel = yenta_cardbus: probe of 
0000:00:0a.0 failed with error -12
The notebook I use = Aspire 1300 serie (1302XC aspire)

I do also have a problem on this computer with the DMA support of mine 
Hard-Disk. It seems when I start up the computer it complete freeze the 
operating system! I did put off the DMA from mine hard-disk and know it seems 
that he is not hanging annymore! If you need more information about mine 
system, please feel free to contact me, and give me the commando's I need to 
use to get the specific information. I hope this mail will be send to the 
correct place, because I'm a newbie on linux...
Thanx for te help,
Best Regards,
Frederik

---------------------
Computer information:
---------------------
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 80)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, medium devsel, latency 8
        Memory at a0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 2.0
        Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 
(prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000c000-0000dfff
        Memory behind bridge: e0000000-efffffff
        Prefetchable memory behind bridge: 90000000-9fffffff
        Capabilities: [80] Power Management version 2

00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus 
Controller
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: stepping, slow devsel, IRQ 11
        Memory at 0c000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 10000000-11fff000 (prefetchable)
        Memory window 1: 12000000-13fff000
        I/O window 0: 00001400-000014ff
        I/O window 1: 00001800-000018ff
        16-bit legacy interface ports at 0001

00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: [c0] Power Management version 2

00:11.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a 
[Master SecP PriP])
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, medium devsel, latency 64
        I/O ports at 1100 [size=16]
        Capabilities: [c0] Power Management version 2

00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 1e) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, medium devsel, latency 22, IRQ 11
        I/O ports at 1200 [size=32]
        Capabilities: [80] Power Management version 2

00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: medium devsel
        Capabilities: [68] Power Management version 2

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio 
Controller (rev 40)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: medium devsel, IRQ 10
        I/O ports at e000 [size=256]
        I/O ports at e100 [size=4]
        I/O ports at e104 [size=4]
        Capabilities: [c0] Power Management version 2

00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller 
(rev 20)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: medium devsel, IRQ 10
        I/O ports at e200 [size=256]
        Capabilities: [d0] Power Management version 2

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, medium devsel, latency 16, IRQ 11
        I/O ports at e800 [size=256]
        Memory at f0000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2

01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA 
Controller (TwisterK) (rev 01) (prog-if 00 [VGA])
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
        Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
        Memory at 90000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at 98000000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
        Capabilities: [80] AGP version 2.0




Linux version 2.6.16.21-0.25-default (geeko@buildhost) (gcc version 4.1.0 (SUSE 
Linux)) #1 Tue Sep 19 07:26:15 UTC 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
 BIOS-e820: 000000000eff0000 - 000000000effffc0 (ACPI data)
 BIOS-e820: 000000000effffc0 - 000000000f000000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
239MB LOWMEM available.
No mptable found.
On node 0 totalpages: 61424
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 57328 pages, LIFO batch:15
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 OID_00                                ) @ 0x000e4010
ACPI: RSDT (v001 OID_00 RSDT_000 0x30303030 & 0x00010007) @ 0x0efffbc0
ACPI: FADT (v002 INSYDE FACP_000 0x00000100 & 0x00010007) @ 0x0efffac0
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 & 0x00010007) @ 0x0efffb50
ACPI: DBGP (v001 INSYDE SYS_DBGP 0x00000100 & 0x00010007) @ 0x0efffb80
ACPI: DSDT (v001 INSYDE   VT8362 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 10000000 (gap: 0f000000:f0f80000)
Built 1 zonelists
Kernel command line: root=/dev/hda7 vga=0x314    resume=/dev/hda6  
splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1400.331 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 237992k/245696k available (1490k kernel code, 7116k reserved, 608k 
data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2804.35 BogoMIPS (lpj=5608703)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 
00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 
00000000 00000000
Enabling disabled K7/SSE Support.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP 1600+  stepping 00
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2323k freed
 not found!
ACPI: setting ELCR to 0200 (from 0c00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe8a64, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PCI: setting IRQ 13 as level-triggered
pnp: PnP ACPI: found 11 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
Setting up standard PCI resources
pnp: 00:07: ioport range 0x1600-0x167f has been reserved
pnp: 00:07: ioport range 0x2c8-0x2cf has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:07: ioport range 0x1000-0x105f could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-dfff
  MEM window: e0000000-efffffff
  PREFETCH window: 90000000-9fffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001400-000014ff
  IO window: 00001800-000018ff
  PREFETCH window: 10000000-11ffffff
  MEM window: 12000000-13ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1161976651.600:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Applying VIA southbridge workaround.
vesafb: framebuffer at 0x90000000, mapped to 0xcf880000, using 3750k, total 
15296k
vesafb: mode is 800x600x16, linelength=1600, pages=14
vesafb: protected mode interface info at c000:7926
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 50686 
bytes,<6>...found (800x600, 28094 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
input: PC Speaker as /class/input/input3
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
 LID BAT0 PBTN AUDI MODM USB0 USB1 LAN0
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 156k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N080ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (79 C)
Attempting manual resume
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, 
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
Adding 481908k swap on /dev/hda6.  Priority:-1 extents:1 across:481908k
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO 
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
lp0: using parport0 (interrupt-driven).
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> 
IRQ 11
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 11, io base 0x00001200
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.21-0.25-default uhci_hcd
usb usb1: SerialNumber: 0000:00:11.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xa0000000
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Enabling device 0000:00:12.0 (0001 -> 0003)
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11
eth0: VIA Rhine II at 0x1e800, 00:c0:9f:1c:a1:f8, IRQ 11.
eth0: MII PHY found at address 1, status 0x782d advertising 01e1 Link 45e1.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> 
IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
hwmon: module not supported by Novell, setting U taint flag.
vt8231: module not supported by Novell, setting U taint flag.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11
yenta_cardbus: probe of 0000:00:0a.0 failed with error -12
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hda: DMA disabled
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
dm-netlink version 0.0.2 loaded
loop: loaded (max 8 devices)
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, 
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
NTFS driver 2.1.26 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1161976680.693:2): AppArmor (version 2.0-19.43r6320) initialized

NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (1919 buckets, 15352 max) - 232 bytes per conntrack
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
audit(1161969500.889:3): audit_backlog_limit=256 old=64 by auid=4294967295
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
powernow-k8: Processor cpuid 680 not supported
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
Detected 1400.331 MHz processor.
powernow: SGTC: 10000
powernow: Minimum speed 500 MHz. Maximum speed 1400 MHz.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
mtrr: no more MTRRs available
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 
PREC=0x00 TTL=64 ID=31606 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK 
FIN URGP=0 OPT (0101080AFFFFC5ACB46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= 
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=49 ID=0 DF PROTO=TCP SPT=80 
DPT=5824 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 
PREC=0x00 TTL=64 ID=31607 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK 
FIN URGP=0 OPT (0101080AFFFFC5E4B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= 
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3807 PROTO=TCP SPT=80 
DPT=5824 WINDOW=0 RES=0x24 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 
PREC=0x00 TTL=64 ID=31608 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK 
FIN URGP=0 OPT (0101080AFFFFC65AB46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= 
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3809 PROTO=TCP SPT=80 
DPT=5824 WINDOW=0 RES=0x24 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 
PREC=0x00 TTL=64 ID=31609 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK 
FIN URGP=0 OPT (0101080AFFFFC741B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= 
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3811 PROTO=TCP SPT=80 
DPT=5824 WINDOW=0 RES=0x24 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 
PREC=0x00 TTL=64 ID=31610 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK 
FIN URGP=0 OPT (0101080AFFFFC906B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= 
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3813 PROTO=TCP SPT=80 
DPT=5824 WINDOW=0 RES=0x24 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 
PREC=0x00 TTL=64 ID=31613 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK 
FIN URGP=0 OPT (0101080AFFFFE189B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= 
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3819 PROTO=TCP SPT=80 
DPT=5824 WINDOW=0 RES=0x04 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 
PREC=0x00 TTL=64 ID=31614 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK 
FIN URGP=0 OPT (0101080AFFFFFD89B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= 
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3821 PROTO=TCP SPT=80 
DPT=5824 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
SCSI subsystem initialized
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
st: Version 20050830, fixed bufsize 32768, s/g segs 256
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO 
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
lp0: using parport0 (interrupt-driven).
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2

Comment 1 Daniel Ritz 2006-10-29 08:12:59 UTC

yenta_socket fails to ioremap() the iomem of the cardbus bridge. the system has
256MB ram (240 + 16 for graphics) but the cardbus bridge has it's resources
assigned at 192MB which can't be right.

Comment 2 Daniel Ritz 2006-10-30 12:24:03 UTC

[ please keep bugzilla in the loop ]

On Sunday 29 October 2006 19.19, Frederik Mattelaere wrote:
> Hi,
> 
> I did read your reply from that error from me! Thanx for the help. What do I 
> need to do to fix it? I did test a bootCD from Pnoppix and there it was 
> working perfect? I did print the log from the knoppix OS. I even can use here 

a full dmesg, lspci -vvv and cat /proc/iomem (from suse as well) please

the latest knoppix has a 2.6.17 based kernel as far as i know. this
suggests that the bug is already fixed after 2.6.16 or that only suse
kernels are affected. it would be good to have an unpatched 2.6.18
tested on the suse system...

> mine wireless card! Can I fix this trouble with some bash commando's??
>

nope

> 
> 
> 
> ------- Additional Comments From daniel.ritz@gmx.ch

Comment 3 Frederik Mattelaere 2006-10-31 00:39:22 UTC

Hi, 
 
Here you got the requested infomation! 
 
Thanx for the help, 
Best Regards, 
Frederik 
 
  
aspire1300:~ # dmesg 
Linux version 2.6.16.21-0.25-default (geeko@buildhost) (gcc version 4.1.0 (SUSE 
Linux)) #1 Tue Sep 19 07:26:15 UTC 2006 
BIOS-provided physical RAM map: 
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) 
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) 
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) 
 BIOS-e820: 0000000000100000 - 000000000eff0000 (usable) 
 BIOS-e820: 000000000eff0000 - 000000000effffc0 (ACPI data) 
 BIOS-e820: 000000000effffc0 - 000000000f000000 (ACPI NVS) 
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 
0MB HIGHMEM available. 
239MB LOWMEM available. 
No mptable found. 
On node 0 totalpages: 61424 
  DMA zone: 4096 pages, LIFO batch:0 
  DMA32 zone: 0 pages, LIFO batch:0 
  Normal zone: 57328 pages, LIFO batch:15 
  HighMem zone: 0 pages, LIFO batch:0 
DMI 2.3 present. 
IO/L-APIC allowed because system is MP or new enough 
ACPI: RSDP (v000 OID_00                                ) @ 0x000e4010 
ACPI: RSDT (v001 OID_00 RSDT_000 0x30303030 & 0x00010007) @ 0x0efffbc0 
ACPI: FADT (v002 INSYDE FACP_000 0x00000100 & 0x00010007) @ 0x0efffac0 
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 & 0x00010007) @ 0x0efffb50 
ACPI: DBGP (v001 INSYDE SYS_DBGP 0x00000100 & 0x00010007) @ 0x0efffb80 
ACPI: DSDT (v001 INSYDE   VT8362 0x00001000 MSFT 0x0100000d) @ 0x00000000 
ACPI: PM-Timer IO Port: 0x1008 
Allocating PCI resources starting at 10000000 (gap: 0f000000:f0f80000) 
Built 1 zonelists 
Kernel command line: root=/dev/hda7 vga=0x314    resume=/dev/hda6  
splash=silent 
bootsplash: silent mode. 
Local APIC disabled by BIOS -- you can enable it with "lapic" 
Enabling fast FPU save and restore... done. 
Initializing CPU#0 
PID hash table entries: 1024 (order: 10, 16384 bytes) 
Detected 1400.331 MHz processor. 
Using tsc for high-res timesource 
Console: colour dummy device 80x25 
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) 
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) 
Memory: 237992k/245696k available (1490k kernel code, 7116k reserved, 608k 
data, 156k init, 0k highmem) 
Checking if this processor honours the WP bit even in supervisor mode... Ok. 
Calibrating delay using timer specific routine.. 2804.35 BogoMIPS (lpj=5608711) 
Security Framework v1.0.0 initialized 
Mount-cache hash table entries: 512 
CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 
00000000 00000000 
CPU: After vendor identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 
00000000 00000000 
Enabling disabled K7/SSE Support. 
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) 
CPU: L2 Cache: 256K (64 bytes/line) 
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 
00000000 00000000 
Intel machine check architecture supported. 
Intel machine check reporting enabled on CPU#0. 
CPU: AMD mobile AMD Athlon(tm) XP 1600+  stepping 00 
Checking 'hlt' instruction... OK. 
checking if image is initramfs... it is 
Freeing initrd memory: 2323k freed 
 not found! 
ACPI: setting ELCR to 0200 (from 0c00) 
NET: Registered protocol family 16 
ACPI: bus type pci registered 
PCI: PCI BIOS revision 2.10 entry at 0xe8a64, last bus=1 
PCI: Using configuration type 1 
ACPI: Subsystem revision 20060127 
ACPI: Interpreter enabled 
ACPI: Using PIC for interrupt routing 
ACPI: PCI Root Bridge [PCI0] (0000:00) 
PCI: Probing PCI hardware (bus 00) 
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 
Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c 
Boot video device is 0000:01:00.0 
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 
ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode. 
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) 
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. 
ACPI: PCI Interrupt Link [LNKC] (IRQs *10) 
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11) 
Linux Plug and Play Support v0.97 (c) Adam Belay 
pnp: PnP ACPI init 
PCI: setting IRQ 13 as level-triggered 
pnp: PnP ACPI: found 11 devices 
PCI: Using ACPI for IRQ routing 
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report 
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) 
Setting up standard PCI resources 
pnp: 00:07: ioport range 0x1600-0x167f has been reserved 
pnp: 00:07: ioport range 0x2c8-0x2cf has been reserved 
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved 
pnp: 00:07: ioport range 0x1000-0x105f could not be reserved 
PCI: Bridge: 0000:00:01.0 
  IO window: c000-dfff 
  MEM window: e0000000-efffffff 
  PREFETCH window: 90000000-9fffffff 
PCI: Bus 2, cardbus bridge: 0000:00:0a.0 
  IO window: 00001400-000014ff 
  IO window: 00001800-000018ff 
  PREFETCH window: 10000000-11ffffff 
  MEM window: 12000000-13ffffff 
PCI: Setting latency timer of device 0000:00:01.0 to 64 
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 
PCI: setting IRQ 11 as level-triggered 
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11 
Simple Boot Flag at 0x37 set to 0x1 
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) 
apm: overridden by ACPI. 
audit: initializing netlink socket (disabled) 
audit(1162288821.596:1): initialized 
Total HugeTLB memory allocated, 0 
VFS: Disk quotas dquot_6.5.1 
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 
Initializing Cryptographic API 
io scheduler noop registered 
io scheduler anticipatory registered 
io scheduler deadline registered 
io scheduler cfq registered (default) 
Applying VIA southbridge workaround. 
vesafb: framebuffer at 0x90000000, mapped to 0xcf880000, using 3750k, total 
15296k 
vesafb: mode is 800x600x16, linelength=1600, pages=14 
vesafb: protected mode interface info at c000:7926 
vesafb: scrolling: redraw 
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 50686 
bytes,<6>...found (800x600, 28094 bytes, v3). 
Console: switching to colour frame buffer device 96x33 
fb0: VESA VGA frame buffer device 
isapnp: Scanning for PnP cards... 
isapnp: No Plug & Play device found 
Real Time Clock Driver v1.12ac 
PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 
i8042.c: Detected active multiplexing controller, rev 1.1. 
serio: i8042 AUX0 port at 0x60,0x64 irq 12 
serio: i8042 AUX1 port at 0x60,0x64 irq 12 
serio: i8042 AUX2 port at 0x60,0x64 irq 12 
serio: i8042 AUX3 port at 0x60,0x64 irq 12 
serio: i8042 KBD port at 0x60,0x64 irq 1 
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 
Floppy drive(s): fd0 is 1.44M 
FDC 0 is a post-1991 82077 
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize 
mice: PS/2 mouse device common for all mice 
input: AT Translated Set 2 keyboard as /class/input/input0 
input: PS/2 Mouse as /class/input/input1 
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 
input: PC Speaker as /class/input/input3 
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 
md: bitmap version 4.39 
NET: Registered protocol family 2 
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) 
TCP established hash table entries: 8192 (order: 3, 32768 bytes) 
TCP bind hash table entries: 8192 (order: 3, 32768 bytes) 
TCP: Hash tables configured (established 8192 bind 8192) 
TCP reno registered 
NET: Registered protocol family 1 
Using IPI Shortcut mode 
ACPI wakeup devices: 
 LID BAT0 PBTN AUDI MODM USB0 USB1 LAN0 
ACPI: (supports S0 S3 S4 S5) 
Freeing unused kernel memory: 156k freed 
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 
VP_IDE: IDE controller at PCI slot 0000:00:11.1 
VP_IDE: chipset revision 6 
VP_IDE: not 100% native mode: will probe irqs later 
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1 
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio 
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio 
Probing IDE interface ide0... 
hda: IC25N080ATMR04-0, ATA DISK drive 
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
hda: max request size: 512KiB 
hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) 
hda: cache flushes supported 
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 > 
Probing IDE interface ide1... 
hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive 
ide1 at 0x170-0x177,0x376 on irq 15 
ACPI: CPU0 (power states: C1[C1] C2[C2]) 
ACPI: Thermal Zone [THRM] (39 C) 
Attempting manual resume 
ReiserFS: hda7: found reiserfs format "3.6" with standard journal 
ReiserFS: hda7: using ordered data mode 
reiserfs: using flush barriers 
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, 
max trans len 1024, max batch 900, max commit age 30, max trans age 30 
ReiserFS: hda7: checking transaction log (hda7) 
ReiserFS: hda7: Using r5 hash to sort names 
Adding 481908k swap on /dev/hda6.  Priority:-1 extents:1 across:481908k 
parport_pc: VIA 686A/8231 detected 
parport_pc: probing current configuration 
parport_pc: Current parallel port base: 0x378 
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO 
[PCSPP,TRISTATE,COMPAT,ECP] 
parport_pc: VIA parallel port: io=0x378, irq=7 
lp0: using parport0 (interrupt-driven). 
usbcore: registered new driver usbfs 
usbcore: registered new driver hub 
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 
PCI: setting IRQ 10 as level-triggered 
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> 
IRQ 10 
PCI: Setting latency timer of device 0000:00:11.5 to 64 
hwmon: module not supported by Novell, setting U taint flag. 
vt8231: module not supported by Novell, setting U taint flag. 
pci_hotplug: PCI Hot Plug PCI Core version: 0.5 
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker 
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11 
yenta_cardbus: probe of 0000:00:0a.0 failed with error -12 
PCI: Enabling device 0000:00:12.0 (0001 -> 0003) 
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11 
eth0: VIA Rhine II at 0x1e800, 00:c0:9f:1c:a1:f8, IRQ 11. 
eth0: MII PHY found at address 1, status 0x7829 advertising 01e1 Link 45e1. 
USB Universal Host Controller Interface driver v2.3 
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> 
IRQ 11 
uhci_hcd 0000:00:11.2: UHCI Host Controller 
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 
uhci_hcd 0000:00:11.2: irq 11, io base 0x00001200 
usb usb1: new device found, idVendor=0000, idProduct=0000 
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 
usb usb1: Product: UHCI Host Controller 
usb usb1: Manufacturer: Linux 2.6.16.21-0.25-default uhci_hcd 
usb usb1: SerialNumber: 0000:00:11.2 
usb usb1: configuration #1 chosen from 1 choice 
hub 1-0:1.0: USB hub found 
hub 1-0:1.0: 2 ports detected 
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) 
Uniform CD-ROM driver Revision: 3.20 
Linux agpgart interface v0.101 (c) Dave Jones 
hda: DMA disabled 
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset 
agpgart: AGP aperture is 64M @ 0xa0000000 
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com 
dm-netlink version 0.0.2 loaded 
loop: loaded (max 8 devices) 
ReiserFS: hda8: found reiserfs format "3.6" with standard journal 
ReiserFS: hda8: using ordered data mode 
reiserfs: using flush barriers 
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, 
max trans len 1024, max batch 900, max commit age 30, max trans age 30 
ReiserFS: hda8: checking transaction log (hda8) 
ReiserFS: hda8: Using r5 hash to sort names 
NTFS driver 2.1.26 [Flags: R/W MODULE]. 
NTFS volume version 3.1. 
NTFS volume version 3.1. 
AppArmor: AppArmor (version 2.0-19.43r6320) initialized 
audit(1162288849.441:2): AppArmor (version 2.0-19.43r6320) initialized 
 
NET: Registered protocol family 10 
lo: Disabled Privacy Extensions 
IPv6 over IPv4 tunneling driver 
ip6_tables: (C) 2000-2006 Netfilter Core Team 
ip_tables: (C) 2000-2006 Netfilter Core Team 
Netfilter messages via NETLINK v0.30. 
ip_conntrack version 2.4 (1919 buckets, 15352 max) - 232 bytes per conntrack 
ACPI: AC Adapter [ADP0] (on-line) 
ACPI: Battery Slot [BAT0] (battery present) 
ACPI: Power Button (FF) [PWRF] 
ACPI: Lid Switch [LID] 
ACPI: Power Button (CM) [PBTN] 
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found 
powernow-k8: Processor cpuid 680 not supported 
powernow: PowerNOW! Technology present. Can scale: frequency and voltage. 
Detected 1400.171 MHz processor. 
powernow: SGTC: 10000 
powernow: Minimum speed 500 MHz. Maximum speed 1400 MHz. 
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 
NET: Registered protocol family 17 
bootsplash: status on console 0 changed to on 
mtrr: no more MTRRs available 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=78 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=58 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=78 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=58 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=78 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=58 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
eth0: no IPv6 routers present 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=110 
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:fb:00:0c:6e:00:f1:0f:08:00 SRC=192.168.1.4 DST=224.0.0.251 
LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:fb:00:0c:6e:00:f1:0f:08:00 SRC=192.168.1.4 DST=224.0.0.251 
LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:fb:00:0c:6e:00:f1:0f:08:00 SRC=192.168.1.4 DST=224.0.0.251 
LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:fb:00:0c:6e:00:f1:0f:08:00 SRC=192.168.1.4 DST=224.0.0.251 
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:fb:00:0c:6e:00:f1:0f:08:00 SRC=192.168.1.4 DST=224.0.0.251 
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:fb:00:0c:6e:00:f1:0f:08:00 SRC=192.168.1.4 DST=224.0.0.251 
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:fb:00:0c:6e:00:f1:0f:08:00 SRC=192.168.1.4 DST=224.0.0.251 
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= 
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=224.0.0.1 
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 
 
 
aspire1300:~ # lspci -vvv 
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 80) 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- 
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR+ 
        Latency: 8 
        Region 0: Memory at a0000000 (32-bit, prefetchable) [size=64M] 
        Capabilities: [a0] AGP version 2.0 
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 
64bit- FW- AGP3- Rate=x1,x2,x4 
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- 
Rate=<none> 
        Capabilities: [c0] Power Management version 2 
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
 
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 
(prog-if 00 [Normal decode]) 
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- 
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR+ 
        Latency: 0 
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 
        I/O behind bridge: 0000c000-0000dfff 
        Memory behind bridge: e0000000-efffffff 
        Prefetchable memory behind bridge: 90000000-9fffffff 
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR- 
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- 
        Capabilities: [80] Power Management version 2 
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
 
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus 
Controller 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B- 
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- 
        Interrupt: pin A routed to IRQ 11 
        Region 0: Memory at 0c000000 (32-bit, non-prefetchable) [size=4K] 
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 
        Memory window 0: 10000000-11fff000 (prefetchable) 
        Memory window 1: 12000000-13fff000 
        I/O window 0: 00001400-000014ff 
        I/O window 1: 00001800-000018ff 
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite- 
        16-bit legacy interface ports at 0001 
 
00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B- 
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- 
        Latency: 0 
        Capabilities: [c0] Power Management version 2 
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
 
00:11.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a 
[Master SecP PriP]) 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- 
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- 
        Latency: 64 
        Region 4: I/O ports at 1100 [size=16] 
        Capabilities: [c0] Power Management version 2 
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
 
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 1e) (prog-if 00 [UHCI]) 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- 
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- 
        Latency: 22 
        Interrupt: pin D routed to IRQ 11 
        Region 4: I/O ports at 1200 [size=32] 
        Capabilities: [80] Power Management version 2 
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
 
00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- 
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- 
        Capabilities: [68] Power Management version 2 
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
 
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio 
Controller (rev 40) 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- 
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- 
        Interrupt: pin C routed to IRQ 10 
        Region 0: I/O ports at e000 [size=256] 
        Region 1: I/O ports at e100 [size=4] 
        Region 2: I/O ports at e104 [size=4] 
        Capabilities: [c0] Power Management version 2 
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
 
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller 
(rev 20) 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- 
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- 
        Interrupt: pin C routed to IRQ 10 
        Region 0: I/O ports at e200 [size=256] 
        Capabilities: [d0] Power Management version 2 
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
 
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- 
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- 
        Latency: 16 (750ns min, 2000ns max), Cache Line Size 04 
        Interrupt: pin A routed to IRQ 11 
        Region 0: I/O ports at e800 [size=256] 
        Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=256] 
        Capabilities: [40] Power Management version 2 
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
 
01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA 
Controller (TwisterK) (rev 01) (prog-if 00 [VGA]) 
        Subsystem: Acer Incorporated [ALI] Unknown device 001d 
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- 
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- 
        Latency: 64 (1000ns min, 63750ns max), Cache Line Size 04 
        Interrupt: pin A routed to IRQ 11 
        Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=512K] 
        Region 1: Memory at 90000000 (32-bit, prefetchable) [size=128M] 
        Expansion ROM at 98000000 [disabled] [size=64K] 
        Capabilities: [dc] Power Management version 2 
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-) 
                Status: D0 PME-Enable- DSel=0 DScale=0 PME- 
        Capabilities: [80] AGP version 2.0 
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 
64bit- FW- AGP3- Rate=x4 
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- 
Rate=x4 
 
 
aspire1300:~ # cat /proc/iomem 
00000000-0009fbff : System RAM 
  00000000-00000000 : Crash kernel 
0009fc00-0009ffff : reserved 
000a0000-000bffff : Video RAM area 
000c0000-000cbfff : Video ROM 
000e0000-000effff : Extension ROM 
000f0000-000fffff : System ROM 
0c000000-0c000fff : 0000:00:0a.0 
0eff0000-0effffbf : ACPI Tables 
0effffc0-0effffff : ACPI Non-volatile Storage 
10000000-11ffffff : PCI CardBus #02 
12000000-13ffffff : PCI CardBus #02 
90000000-9fffffff : PCI Bus #01 
  90000000-97ffffff : 0000:01:00.0 
    90000000-90eeffff : vesafb 
  98000000-9800ffff : 0000:01:00.0 
a0000000-a3ffffff : 0000:00:00.0 
e0000000-efffffff : PCI Bus #01 
  e0000000-e007ffff : 0000:01:00.0 
f0000000-f00000ff : 0000:00:12.0 
  f0000000-f00000ff : via-rhine 
fff80000-ffffffff : reserved

Comment 4 Anonymous Emailer 2006-11-01 13:08:34 UTC

Reply-To: daniel.ritz-ml@swissonline.ch

On Tuesday 31 October 2006 09.53, bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7427
> 
> ------- Additional Comments From frederik.mattelaere@telenet.be  2006-10-31 00:39 -------
> Hi, 
>  
> Here you got the requested infomation! 
>  
errm.. i meant dmesg and /proc/iomem, lspci -vvv from knoppix.
just the iomem additional from suse too..anyway..

>  
>   
> aspire1300:~ # dmesg 
> Linux version 2.6.16.21-0.25-default (geeko@buildhost) (gcc version 4.1.0 (SUSE 
> Linux)) #1 Tue Sep 19 07:26:15 UTC 2006 
> BIOS-provided physical RAM map: 
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) 
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) 
>  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) 
>  BIOS-e820: 0000000000100000 - 000000000eff0000 (usable) 
>  BIOS-e820: 000000000eff0000 - 000000000effffc0 (ACPI data) 
>  BIOS-e820: 000000000effffc0 - 000000000f000000 (ACPI NVS) 
>  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 
> 0MB HIGHMEM available. 
> 239MB LOWMEM available. 

the e820 memory map looks sane...
> aspire1300:~ # cat /proc/iomem 
> 00000000-0009fbff : System RAM 
>   00000000-00000000 : Crash kernel 
> 0009fc00-0009ffff : reserved 
> 000a0000-000bffff : Video RAM area 
> 000c0000-000cbfff : Video ROM 
> 000e0000-000effff : Extension ROM 
> 000f0000-000fffff : System ROM
all ok

but here the second "(usable)" from the e820 map is missing
> 0c000000-0c000fff : 0000:00:0a.0 
and we have the cardbus bridge here instead

the rest looks ok

i would bet that /proc/iomem from knoppix and a vanilla
2.6.16/17/18 kernel would look sane...
please file a bug report at suse

Comment 5 Frederik Mattelaere 2006-11-02 04:31:51 UTC

Hi,

Here is the information from that knoppix Live CD where the yenta socket not 
fails!

Best Regards,
Frederik

aded.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio4
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  1928.000 MB/sec
raid5: using function: pIII_sse (1928.000 MB/sec)
raid6: int32x1    531 MB/s
raid6: int32x2    675 MB/s
raid6: int32x4    402 MB/s
raid6: int32x8    402 MB/s
raid6: mmxx1     1175 MB/s
raid6: mmxx2     2015 MB/s
raid6: sse1x1     562 MB/s
raid6: sse1x2    1136 MB/s
raid6: using algorithm sse1x2 (1136 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
ACPI wakeup devices:
 LID BAT0 PBTN AUDI MODM USB0 USB1 LAN0
ACPI: (supports S0 S3 S4 S4bios S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
ntfs: version magic '2.6.11-kanotix-7 preempt 586 gcc-3.3' should be 
'2.6.11-auditor-10 preempt 586 gcc-3.3'
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 288k freed
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (69 C)
ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.0 [1025:001d]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000821
acx100: It looks like you've been coaxed into buying a wireless network card
acx100: that uses the mysterious ACX100/ACX111 chip from Texas Instruments.
acx100: You should better have bought e.g. a PRISM(R) chipset based card,
acx100: since that would mean REAL vendor Linux support.
acx100: Given this info, it's evident that this driver is still EXPERIMENTAL,
acx100: thus your mileage may vary. Reading README file and/or Craig's HOWTO is
recommended, visit http://acx100.sf.net in case of further 
questions/discussion.
acx100: Compiled to use 32bit I/O access (faster, however I/O timing issues 
might occur, such as firmware upload failure!) instead of 16bit access
Running on a little-endian CPU
acx_init_module: dev_info is: TI acx_pci
acx_init_module: TI acx_pci.o: Ver 0.2.0pre8 driver initialized, waiting for 
cards to probe...
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
acx_probe_pci: WARNING: ACX111 support is quite experimental!
Found ACX111-based wireless network card at 0000:02:00.0, irq:11, 
phymem1:0xf820000, phymem2:0xf800000, mem1:0xcf84c000, mem1_size:8192, 
mem2:0xcff00000, mem2_size:131072
initial debug setting is 0x001b
acx_select_io_register_set: using ACX111 io resource addresses (size: 56)
hw_unavailable = 1
acx_probe_pci: TI acx_pci: Using IRQ 11
reset hw_unavailable++
acx_reset_mac: enable soft reset...
acx_reset_mac: disable soft reset and go to init mode...
cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x3000-0x7fff:<4>Requesting firmware image 'TIACX111.BIN'
 clean.
No firmware image was provided. Check your hotplug scripts
Attention: no firmware directory specified via module parameter firmware_dir, 
using default firmware directory /usr/share/acx
Reading firmware image '/usr/share/acx/TIACX111.BIN'
cs: IO port probe 0xa00-0xaff: clean.
Allocated 62772 bytes for firmware module loading.
not using auto increment for firmware loading
acx_write_fw: firmware written
acx_write_fw (firmware): 0, acx_validate_fw: 0
acx_reset_dev: boot up eCPU and wait for complete...
acx_reset_dev: Received signal that card is ready to be configured :) (the eCPU 
has woken up)
acx_reset_dev: Clean up cmd mailbox access area
reset hw_unavailable--
acx100: allocated net device wlan0, driver compiled against wireless extensions 
v17 and Linux 2.6.11-auditor-10
******************************************
************* acx_init_mac_1 *************
******************************************
==> Get the mailbox pointers from the scratch pad registers
CmdMailboxOffset = 1dd00
InfoMailboxOffset = 1de86
<== Get the mailbox pointers from the scratch pad registers
CommandParameters = [ 0xcff1dd04 ]
InfoParameters = [ 0xcff1de8a ]
Requesting firmware image 'RADIO16.BIN'
No firmware image was provided. Check your hotplug scripts
Reading firmware image '/usr/share/acx/RADIO16.BIN'
ERROR 2 trying to open firmware image file 'RADIO16.BIN': file not found - make 
sure this EXACT filename is in eXaCtLy this directory!
WARNING: no suitable radio module (RADIO16.BIN) found to load. No problem in 
case of a combined firmware, FATAL when using a separated firmware (base 
firmware / radio image).
acx111_init_packet_templates: Init max packet templates
acx111_create_dma_regions: set up acx111 queue memory configuration (queue 
configs + descriptors)
dump queue head (from card):
len: 24
tx_memory_block_address: 17F60
rx_memory_block_address: 11660
rx1_queue address: FA54
tx1_queue address: 100D4
get_mask 0x00004182, set_mask 0x00000000
Don't know how to get sensitivity for radio type 0x16, please try to add that!
Got sensitivity value 0
Got antenna value 0x4A
Got regulatory domain 0x30
get_mask 0x00000000, set_mask 0x00000000 - after update
new ratevector: 82 84 0b 0c 12 16 18 24 2c 30 48 60 6c
setting RXconfig to 2000:0000
Beacon length:69
hw_unavailable--
acx100: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 (Radia), 
EEPROM version 0x05. Uploaded firmware 'Rev 0.1.0.11' (0x03010101).
creating /proc entry driver/acx_wlan0
creating /proc entry driver/acx_wlan0_diag
creating /proc entry driver/acx_wlan0_eeprom
creating /proc entry driver/acx_wlan0_phy
acx_probe_pci: TI acx_pci.o: Ver 0.2.0pre8 loaded successfully
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: irq 11, io base 0x1200
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO 
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Enabling device 0000:00:12.0 (0001 -> 0003)
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xf0000000, 00:c0:9f:1c:a1:f8, IRQ 11.
eth0: MII PHY found at address 1, status 0x7809 advertising 01e1 Link 0000.
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO 
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 189M
agpgart: AGP aperture is 64M @ 0xa0000000
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xf0000000, 00:c0:9f:1c:a1:f8, IRQ 11.
eth0: MII PHY found at address 1, status 0x7809 advertising 01e1 Link 0000.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
input: PC Speaker
Adding 481908k swap on /dev/hda6.  Priority:-1 extents:1
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: SGTC: 10000
powernow: Minimum speed 500 MHz. Maximum speed 1400 MHz.
mtrr: 0x90000000,0x1000000 overlaps existing 0x90000000,0x800000
NET: Registered protocol family 17
module count ++
OPENING DEVICE
acx_set_status: Setting status = 1 (SCANNING)
<acx_set_timer> Elapse = 2500000
attempt to set the timer when the card interface is not up!
ACX100 f/w ver >= 1.9.3.e or ACX111 --> using s/w timer
initial settings update on iface activation.
get_mask 0x00000000, set_mask 0x0037eefc
important setting has been changed --> need to update packet templates, too
Updating Tx fallback to 0 retries
Updating transmit power: 15 dBm
Updating antenna value: 0x4A
Updating Energy Detect (ED) threshold: 0
ACX111 doesn't support ED!
Updating Channel Clear Assessment (CCA) value: 0x00
ACX111 doesn't support CCA!
Updating channel: 6
Updating: enable Tx
Updating: enable Rx on channel: 6
Updating short retry limit: 7, long retry limit: 4
Updating Tx MSDU lifetime: 4096
Updating regulatory domain: 0x30
setting RXconfig to 2010:0fdd
Updating WEP key settings
Setting WEP key 0 as default.
Starting radio scan
acx_set_status: Setting status = 1 (SCANNING)
<acx_set_timer> Elapse = 2500000
attempt to set the timer when the card interface is not up!
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
<acx_sta_list_add> sta=00:04:e2:9b:3b:d2
found and registered station: ESSID "" on channel 6, BSSID 00:04:e2:9b:3b:d2, 
Access Point, caps 0x0421, SIR 13, SNR 0
found and registered station: ESSID "" on channel 6, BSSID 00:04:e2:9b:3b:d2, 
Access Point, caps 0x0421, SIR 13, SNR 0
Got Info IRQ: status 0x0001, type 0xd200: (unknown)
<Scan Table>: SSID="",CH=6,SIR=13,SNR=0
peer_cap 0x0421, needed_cap 0x0001
found station with empty or single-space (hidden) SSID, considering for assoc 
attempt
acx_complete_dot11_scan: matching station found: 00:04:e2:9b:3b:d2, joining
acx_cmd_join_bssid rates_basic 0003, rates_supported 1fff
<acx_cmd_join_bssid> BSS_Type = 2
<acx_cmd_join_bssid> JoinBSSID MAC:00:04:e2:9b:3b:d2
Sending authentication1 request, awaiting response!
acx_set_status: Setting status = 2 (WAIT_AUTH)
<acx_set_timer> Elapse = 1500000
00:c0:49:d6:b6:e1 00:c0:49:d6:b6:e1 00:04:e2:9b:3b:d2 00:04:e2:9b:3b:d2 
00:04:e2:9b:3b:d2
Algorithm is ok
acx_process_authen auth seq step 2
acx_set_status: Setting status = 3 (AUTHENTICATED)
<acx_set_timer> Elapse = 1500000
Sending association request, awaiting response! NOT ASSOCIATED YET.
association: requesting capabilities 0x0020
acx_set_status: Setting status = 4 (ASSOCIATED)
ASSOCIATED!
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
acx_set_status: Setting status = 0 (STOPPED)
module count --
module count ++
OPENING DEVICE
acx_set_status: Setting status = 1 (SCANNING)
<acx_set_timer> Elapse = 2500000
attempt to set the timer when the card interface is not up!
ACX100 f/w ver >= 1.9.3.e or ACX111 --> using s/w timer
initial settings update on iface activation.
get_mask 0x00000000, set_mask 0x0006cebc
important setting has been changed --> need to update packet templates, too
Updating transmit power: 15 dBm
Updating antenna value: 0x4A
Updating Energy Detect (ED) threshold: 0
ACX111 doesn't support ED!
Updating Channel Clear Assessment (CCA) value: 0x00
ACX111 doesn't support CCA!
Updating channel: 6
Updating: enable Tx
Updating: enable Rx on channel: 6
Updating regulatory domain: 0x30
Updating WEP key settings
Setting WEP key 0 as default.
Starting radio scan
acx_set_status: Setting status = 1 (SCANNING)
<acx_set_timer> Elapse = 2500000
attempt to set the timer when the card interface is not up!
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
FIXME: most likely needs refinement, first implementation version only...
get_mask 0x00000000, set_mask 0x00000040
setting RXconfig to 2010:0fdd
get_mask 0x00000000, set_mask 0x00000000 - after update
<acx_sta_list_add> sta=00:04:e2:9b:3b:d2
found and registered station: ESSID "" on channel 6, BSSID 00:04:e2:9b:3b:d2, 
Access Point, caps 0x0021, SIR 13, SNR 0
Got Info IRQ: status 0x0001, type 0xd200: (unknown)
<Scan Table>: SSID="",CH=6,SIR=13,SNR=0
peer_cap 0x0021, needed_cap 0x0001
found station with empty or single-space (hidden) SSID, considering for assoc 
attempt
acx_complete_dot11_scan: matching station found: 00:04:e2:9b:3b:d2, joining
acx_cmd_join_bssid rates_basic 0003, rates_supported 1fff
<acx_cmd_join_bssid> BSS_Type = 2
<acx_cmd_join_bssid> JoinBSSID MAC:00:04:e2:9b:3b:d2
Sending authentication1 request, awaiting response!
acx_set_status: Setting status = 2 (WAIT_AUTH)
<acx_set_timer> Elapse = 1500000
00:c0:49:d6:b6:e1 00:c0:49:d6:b6:e1 00:04:e2:9b:3b:d2 00:04:e2:9b:3b:d2 
00:04:e2:9b:3b:d2
Algorithm is ok
acx_process_authen auth seq step 2
acx_set_status: Setting status = 3 (AUTHENTICATED)
<acx_set_timer> Elapse = 1500000
Sending association request, awaiting response! NOT ASSOCIATED YET.
association: requesting capabilities 0x0020
acx_set_status: Setting status = 4 (ASSOCIATED)
ASSOCIATED!
acx_timer: status = 4

root@1[knoppix]# lspci -vvv
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 
80)
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR+
        Latency: 8
        Region 0: Memory at a0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 
64bit- FW- AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- 
Rate=<none>
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 
(prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR+
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000c000-0000dfff
        Memory behind bridge: e0000000-efffffff
        Prefetchable memory behind bridge: 90000000-9fffffff
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 0f000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 0f400000-0f7ff000 (prefetchable)
        Memory window 1: 0f800000-0fbff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
        16-bit legacy interface ports at 0001

0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 
10)
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:11.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a 
[Master SecP PriP])
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Region 4: I/O ports at 1100 [size=16]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 1e) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 22
        Interrupt: pin D routed to IRQ 11
        Region 4: I/O ports at 1200 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Capabilities: [68] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 
Audio Controller (rev 40)
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 10
        Region 0: I/O ports at e000 [size=256]
        Region 1: I/O ports at e100 [size=4]
        Region 2: I/O ports at e104 [size=4]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 
Modem] (rev 20)
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 10
        Region 0: I/O ports at e200 [size=256]
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 
51)
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 16 (750ns min, 2000ns max), Cache Line Size: 0x04 (16 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at e800 [size=256]
        Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X 
VGA Controller (TwisterK) (rev 01) (prog-if 00 [VGA])
        Subsystem: Acer Incorporated [ALI]: Unknown device 001d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 0x04 (16 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
        Region 1: Memory at 90000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at 000c0000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 
64bit- FW- AGP3- Rate=x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- 
Rate=x4

0000:02:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless 
Interface
        Subsystem: Unknown device 010e:16ec
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 0f820000 (32-bit, non-prefetchable) [size=8K]
        Region 1: Memory at 0f800000 (32-bit, non-prefetchable) [size=128K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		
Commando /proc/iomemI could not ask from console! I did go manualy to the file 
iomem under the
the directory proc/ and opend the file iomem with "vi"!!!!!!!!!!!!
		
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000f0000-000fffff : System ROM
00100000-0efeffff : System RAM
  00100000-003a75df : Kernel code
  003a75e0-004ca37f : Kernel data
0eff0000-0effffbf : ACPI Tables
0effffc0-0effffff : ACPI Non-volatile Storage
0f000000-0f000fff : 0000:00:0a.0
  0f000000-0f000fff : yenta_socket
0f400000-0f7fffff : PCI CardBus #02
0f800000-0fbfffff : PCI CardBus #02
  0f800000-0f81ffff : 0000:02:00.0
    0f800000-0f81ffff : ACX1xx_2
  0f820000-0f821fff : 0000:02:00.0
    0f820000-0f821fff : ACX1xx_1
90000000-9fffffff : PCI Bus #01
  90000000-97ffffff : 0000:01:00.0
    90000000-90eeffff : vesafb
a0000000-a3ffffff : 0000:00:00.0
e0000000-efffffff : PCI Bus #01
"iomem" [readonly] 27L, 901C

Note You need to log in before you can comment on or make changes to this bug.