Distribution: Debian Kernels tested: 2.6.17, 2.6.18, Debian 2.6.18-1-686 Hardware: Satellite Pro M70 + Pinnacle PCTV Hybrid Pro Card dmesg (I will attach full output in next message): BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005fee0000 (usable) BIOS-e820: 000000005fee0000 - 000000005feea000 (ACPI data) BIOS-e820: 000000005feea000 - 000000005ff00000 (ACPI NVS) BIOS-e820: 000000005ff00000 - 0000000060000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 638MB HIGHMEM available. 896MB LOWMEM available. ... pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved pnp: 00:01: ioport range 0xff00-0xff7f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: b8100000-b81fffff PREFETCH window: c8000000-cfffffff PCI: Bridge: 0000:00:1c.0 IO window: 4000-4fff MEM window: bc000000-bfffffff PREFETCH window: d0000000-d3ffffff PCI: Bridge: 0000:00:1c.1 IO window: 5000-5fff MEM window: c0000000-c3ffffff PREFETCH window: d4000000-d7ffffff PCI: Bus 7, cardbus bridge: 0000:06:04.0 IO window: 00006400-000064ff IO window: 00006800-000068ff PREFETCH window: 68000000-69ffffff MEM window: 6a000000-6bffffff PCI: Bridge: 0000:00:1e.0 IO window: 6000-6fff MEM window: c4000000-c40fffff PREFETCH window: 68000000-69ffffff ... pccard: CardBus card inserted into slot 0 PCI: Failed to allocate mem resource #0:1000000@6c000000 for 0000:07:00.2 Linux video capture interface: v2.00 ... cat /proc/iomem (after card insert): 00000000-0009f7ff : System RAM 00000000-00000000 : Crash kernel 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cffff : Video ROM 000d0000-000d0fff : Adapter ROM 000d2000-000d3fff : reserved 000f0000-000fffff : System ROM 00100000-5fedffff : System RAM 00100000-0027f97d : Kernel code 0027f97e-0030f7b3 : Kernel data 5fee0000-5fee9fff : ACPI Tables 5feea000-5fefffff : ACPI Non-volatile Storage 5ff00000-5fffffff : reserved 68000000-69ffffff : PCI Bus #06 68000000-69ffffff : PCI CardBus #07 6a000000-6bffffff : PCI CardBus #07 b8000000-b80003ff : 0000:00:1d.7 b8000000-b80003ff : ehci_hcd b8000400-b80004ff : 0000:00:1e.2 b8000400-b80004ff : Intel ICH6 b8000800-b80009ff : 0000:00:1e.2 b8000800-b80009ff : Intel ICH6 b8000c00-b8000fff : 0000:00:1f.2 b8000c00-b8000fff : ahci b8100000-b81fffff : PCI Bus #01 b8100000-b810ffff : 0000:01:00.0 b8120000-b813ffff : 0000:01:00.0 bc000000-bfffffff : PCI Bus #02 c0000000-c3ffffff : PCI Bus #03 c4000000-c40fffff : PCI Bus #06 c4000000-c4003fff : 0000:06:04.2 c4004000-c4005fff : 0000:06:04.3 c4006000-c40060ff : 0000:06:01.0 c4006000-c40060ff : 8139too c4006400-c40064ff : 0000:06:04.4 c4006400-c40064ff : sdhci:slot2 c4006800-c4006fff : 0000:06:04.2 c4006800-c4006fff : ohci1394 c4007000-c4007fff : 0000:06:02.0 c4007000-c4007fff : ipw2200 c4008000-c4008fff : 0000:06:04.0 c4008000-c4008fff : yenta_socket c4009000-c40090ff : 0000:06:04.4 c4009000-c40090ff : sdhci:slot1 c4009400-c40094ff : 0000:06:04.4 c4009400-c40094ff : sdhci:slot0 c8000000-cfffffff : PCI Bus #01 c8000000-cfffffff : 0000:01:00.0 d0000000-d3ffffff : PCI Bus #02 d4000000-d7ffffff : PCI Bus #03 e0000000-f0005fff : reserved f0008000-f000bfff : reserved fed20000-fed8ffff : reserved ff000000-ffffffff : reserved lspci -vvxx (I will attach full output in next message): ... 06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 169 Region 0: Memory at c4008000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 68000000-69fff000 (prefetchable) Memory window 1: 6a000000-6bfff000 I/O window 0: 00006400-000064ff I/O window 1: 00006800-000068ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 00: 4c 10 31 80 07 00 10 02 00 00 07 06 08 a8 82 00 10: 00 80 00 c4 a0 00 00 22 06 07 0a b0 00 00 00 68 20: 00 f0 ff 69 00 00 00 6a 00 f0 ff 6b 00 64 00 00 30: fc 64 00 00 00 68 00 00 fc 68 00 00 0a 01 00 05 40: 79 11 00 ff 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... 07:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: Yuan Yuan Enterprise Co., Ltd. Unknown device 1788 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (5000ns min, 13750ns max) Interrupt: pin A routed to IRQ 169 Region 0: Memory at 6a000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: f1 14 00 88 06 00 90 02 05 00 00 04 00 40 80 00 10: 00 00 00 6a 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 ab 12 88 17 30: 00 00 00 00 44 00 00 00 00 00 00 00 a9 01 14 37 07:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) Subsystem: Yuan Yuan Enterprise Co., Ltd. Unknown device 1788 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 169 Region 0: Memory at 6b000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: f1 14 01 88 06 00 90 02 05 00 80 04 00 40 80 00 10: 00 00 00 6b 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 ab 12 88 17 30: 00 00 00 00 4c 00 00 00 00 00 00 00 a9 01 04 ff 07:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) Subsystem: Yuan Yuan Enterprise Co., Ltd. Unknown device 1788 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 169 Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: f1 14 02 88 00 00 90 02 05 00 80 04 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 ab 12 88 17 30: 00 00 00 00 4c 00 00 00 00 00 00 00 a9 01 06 58
Created attachment 9299 [details] full dmesg output
Created attachment 9300 [details] full output of "lspci -vvxx"
oops, correct cat /proc/iomem output (with card inserted): 00000000-0009f7ff : System RAM 00000000-00000000 : Crash kernel 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cffff : Video ROM 000d0000-000d0fff : Adapter ROM 000d2000-000d3fff : reserved 000f0000-000fffff : System ROM 00100000-5fedffff : System RAM 00100000-0027f97d : Kernel code 0027f97e-0030f7b3 : Kernel data 5fee0000-5fee9fff : ACPI Tables 5feea000-5fefffff : ACPI Non-volatile Storage 5ff00000-5fffffff : reserved 68000000-69ffffff : PCI Bus #06 68000000-69ffffff : PCI CardBus #07 6a000000-6bffffff : PCI CardBus #07 6a000000-6affffff : 0000:07:00.0 6a000000-6affffff : cx88[0] 6b000000-6bffffff : 0000:07:00.1 6b000000-6bffffff : cx88[0] b8000000-b80003ff : 0000:00:1d.7 b8000000-b80003ff : ehci_hcd b8000400-b80004ff : 0000:00:1e.2 b8000400-b80004ff : Intel ICH6 b8000800-b80009ff : 0000:00:1e.2 b8000800-b80009ff : Intel ICH6 b8000c00-b8000fff : 0000:00:1f.2 b8000c00-b8000fff : ahci b8100000-b81fffff : PCI Bus #01 b8100000-b810ffff : 0000:01:00.0 b8120000-b813ffff : 0000:01:00.0 bc000000-bfffffff : PCI Bus #02 c0000000-c3ffffff : PCI Bus #03 c4000000-c40fffff : PCI Bus #06 c4000000-c4003fff : 0000:06:04.2 c4004000-c4005fff : 0000:06:04.3 c4006000-c40060ff : 0000:06:01.0 c4006000-c40060ff : 8139too c4006400-c40064ff : 0000:06:04.4 c4006400-c40064ff : sdhci:slot2 c4006800-c4006fff : 0000:06:04.2 c4006800-c4006fff : ohci1394 c4007000-c4007fff : 0000:06:02.0 c4007000-c4007fff : ipw2200 c4008000-c4008fff : 0000:06:04.0 c4008000-c4008fff : yenta_socket c4009000-c40090ff : 0000:06:04.4 c4009000-c40090ff : sdhci:slot1 c4009400-c40094ff : 0000:06:04.4 c4009400-c40094ff : sdhci:slot0 c8000000-cfffffff : PCI Bus #01 c8000000-cfffffff : 0000:01:00.0 d0000000-d3ffffff : PCI Bus #02 d4000000-d7ffffff : PCI Bus #03 e0000000-f0005fff : reserved f0008000-f000bfff : reserved fed20000-fed8ffff : reserved ff000000-ffffffff : reserved
Can you retry with the latest kernel? http://lkml.org/lkml/2006/12/18/266 that issue has been solved a while ago.
Some more information about getting your device work: http://linuxtv.org/v4lwiki/index.php/Pinnacle/310c I played around with it a while ago and got radio and analogue TV work, due the lack of a DVB-T signal I didn't work on DVB-T The actual issue is resolved already.
Thank you :). I don't have to much time, but I will try to test the driver from your git repository :). Thank you again :)