Most recent kernel where this bug did not occur: Distribution:Gentoo (2006.0) Hardware Environment:Acer Aspire 5002WLMI (sis760gx chipset) Software Environment:Linux Problem Description:suspend to ram does not work at all (cat /var/log/messages is empty beyond hibernate-ram command) normally have to use vbetool which works fine. The computer goes down for s3 and powers down normally, it then attempts to wake up but never does (blank screen empty log files no lights exept for power). (possibly DMA problem, hd not waking up). kernel sources less than 2.6.17 work flawlessly, same configuration with 2.6.17 fails. Steps to reproduce: use hibernate-ram with hibernate-script (not suspend2 sources, doesn't matter if in or not) with sis760gx chipset. I will post more information ( log files ) if requested. (I have no Idea even where to start)
*** Bug 6913 has been marked as a duplicate of this bug. ***
Same problem here. It used to work in 2.6.14 laptop: Acer Aspire 5022 WMLi distro: Gentoo arch: amd64 kernel: gentoo patched 2.6.17-r4 and acer_acpi 0.3 module
Unload as many driver modules as possible, and try if there is any difference please.
Here's what I did this time: - stop X - rmmod ndiswrapper and fglrx (keeping only acer_acpi module, as I think I need it) - hibernate-ram Actual results: Completely the same happenes as before. Further observations: - I noticed that the HDD led only shines for a very short time when resuming from suspend and then turning off, while the DVD/CD drive is still probing. It seems as if on resume it doesn't wake up the hard disk as it should or doesn't maount it or something in that direction... But, as I'm using the gentoo kernel and not straight vanilla, it could be in my case a problem from the gentoo patches.
currently using hibernate-ram /etc/hibernate/common.conf unload all modules hmmm, will attempt to duplicate from x86
Thought this may be of use: Aug 1 19:06:28 koepke syslog-ng[10148]: syslog-ng version 1.6.9 starting Aug 1 19:06:28 koepke syslog-ng[10148]: Changing permissions on special file /dev/tty12 Aug 1 19:06:28 koepke Bootdata ok (command line is real_root=/dev/hda4 resume2=swap:/dev/hda3 udev) Aug 1 19:06:28 koepke Linux version 2.6.17-suspend2-r3 (root@koepke) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #1 Mon Jul 31 15:58:47 GMT 2006 Aug 1 19:06:28 koepke BIOS-provided physical RAM map: Aug 1 19:06:28 koepke BIOS-e820: 0000000000000000 - 000000000009f400 (usable) Aug 1 19:06:28 koepke BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) Aug 1 19:06:28 koepke BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) Aug 1 19:06:28 koepke BIOS-e820: 0000000000100000 - 000000004bef0000 (usable) Aug 1 19:06:28 koepke BIOS-e820: 000000004bef0000 - 000000004befa000 (ACPI data) Aug 1 19:06:28 koepke BIOS-e820: 000000004befa000 - 000000004bf00000 (ACPI NVS) Aug 1 19:06:28 koepke BIOS-e820: 000000004bf00000 - 0000000050000000 (reserved) Aug 1 19:06:28 koepke BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Aug 1 19:06:28 koepke DMI present. Aug 1 19:06:28 koepke ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7f60 Aug 1 19:06:28 koepke ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000004bef61be Aug 1 19:06:28 koepke ACPI: FADT (v001 SiS 755F 0x06040000 PTL 0x000f4240) @ 0x000000004bef9e5f Aug 1 19:06:28 koepke ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000004bef9ed3 Aug 1 19:06:28 koepke ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000004bef9f88 Aug 1 19:06:28 koepke ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000004bef9fd8 Aug 1 19:06:28 koepke ACPI: DSDT (v001 PTLTD 755 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 Aug 1 19:06:28 koepke On node 0 totalpages: 305086 Aug 1 19:06:28 koepke DMA zone: 2354 pages, LIFO batch:0 Aug 1 19:06:28 koepke DMA32 zone: 302732 pages, LIFO batch:31 Aug 1 19:06:28 koepke ACPI: PM-Timer IO Port: 0x8008 Aug 1 19:06:28 koepke ACPI: Local APIC address 0xfee00000 Aug 1 19:06:28 koepke ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Aug 1 19:06:28 koepke Processor #0 15:4 APIC version 16 Aug 1 19:06:28 koepke ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Aug 1 19:06:28 koepke ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Aug 1 19:06:28 koepke IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 Aug 1 19:06:28 koepke ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Aug 1 19:06:28 koepke ACPI: IRQ0 used by override. Aug 1 19:06:28 koepke ACPI: IRQ2 used by override. Aug 1 19:06:28 koepke ACPI: IRQ11 used by override. Aug 1 19:06:28 koepke Setting APIC routing to flat Aug 1 19:06:28 koepke Using ACPI (MADT) for SMP configuration information Aug 1 19:06:28 koepke Allocating PCI resources starting at 60000000 (gap: 50000000:aff00000) Aug 1 19:06:28 koepke Checking aperture... Aug 1 19:06:28 koepke CPU 0: aperture @ e0000000 size 32 MB Aug 1 19:06:28 koepke Aperture from northbridge cpu 0 too small (32 MB) Aug 1 19:06:28 koepke AGP bridge at 00:00:00 Aug 1 19:06:28 koepke Aperture from AGP @ e0000000 size 32 MB (APSIZE f38) Aug 1 19:06:28 koepke Aperture from AGP bridge too small (32 MB) Aug 1 19:06:28 koepke Your BIOS doesn't leave a aperture memory hole Aug 1 19:06:28 koepke Please enable the IOMMU option in the BIOS setup Aug 1 19:06:28 koepke This costs you 64 MB of RAM Aug 1 19:06:28 koepke Mapping aperture over 65536 KB of RAM @ 4000000 Aug 1 19:06:28 koepke Built 1 zonelists Aug 1 19:06:28 koepke Kernel command line: real_root=/dev/hda4 resume2=swap:/dev/hda3 udev Aug 1 19:06:28 koepke Initializing CPU#0 Aug 1 19:06:28 koepke PID hash table entries: 4096 (order: 12, 32768 bytes) Aug 1 19:06:28 koepke time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. Aug 1 19:06:28 koepke time.c: Detected 1600.079 MHz processor. Aug 1 19:06:28 koepke Console: colour VGA+ 80x25 Aug 1 19:06:28 koepke Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Aug 1 19:06:28 koepke Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Aug 1 19:06:28 koepke Memory: 1149612k/1244096k available (3421k kernel code, 93536k reserved, 1224k data, 220k init) Aug 1 19:06:28 koepke Calibrating delay using timer specific routine.. 3201.73 BogoMIPS (lpj=6403474) Aug 1 19:06:28 koepke Mount-cache hash table entries: 256 Aug 1 19:06:28 koepke CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Aug 1 19:06:28 koepke CPU: L2 Cache: 1024K (64 bytes/line) Aug 1 19:06:28 koepke CPU: AMD Turion(tm) 64 Mobile Technology ML-30 stepping 02 Aug 1 19:06:28 koepke Using local APIC timer interrupts. Aug 1 19:06:28 koepke result 12500631 Aug 1 19:06:28 koepke Detected 12.500 MHz APIC timer. Aug 1 19:06:28 koepke testing NMI watchdog ... OK. Aug 1 19:06:28 koepke checking if image is initramfs... it is Aug 1 19:06:28 koepke Freeing initrd memory: 1464k freed Aug 1 19:06:28 koepke NET: Registered protocol family 16 Aug 1 19:06:28 koepke ACPI: bus type pci registered Aug 1 19:06:28 koepke PCI: Using configuration type 1 Aug 1 19:06:28 koepke ACPI: Subsystem revision 20060127 Aug 1 19:06:28 koepke ACPI: Interpreter enabled Aug 1 19:06:28 koepke ACPI: Using IOAPIC for interrupt routing Aug 1 19:06:28 koepke ACPI: PCI Root Bridge [PCI0] (0000:00) Aug 1 19:06:28 koepke PCI: Probing PCI hardware (bus 00) Aug 1 19:06:28 koepke Uncovering SIS963 that hid as a SIS503 (compatible=0) Aug 1 19:06:28 koepke PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 Aug 1 19:06:28 koepke Boot video device is 0000:01:00.0 Aug 1 19:06:28 koepke ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Aug 1 19:06:28 koepke ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. Aug 1 19:06:28 koepke ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11) Aug 1 19:06:28 koepke ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11) Aug 1 19:06:28 koepke ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11) Aug 1 19:06:28 koepke ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11) Aug 1 19:06:28 koepke ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) Aug 1 19:06:28 koepke ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) Aug 1 19:06:28 koepke ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. Aug 1 19:06:28 koepke ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11) Aug 1 19:06:28 koepke SCSI subsystem initialized Aug 1 19:06:28 koepke usbcore: registered new driver usbfs Aug 1 19:06:28 koepke usbcore: registered new driver hub Aug 1 19:06:28 koepke PCI: Using ACPI for IRQ routing Aug 1 19:06:28 koepke PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Aug 1 19:06:28 koepke TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) Aug 1 19:06:28 koepke agpgart: Detected AGP bridge 0 Aug 1 19:06:28 koepke agpgart: Aperture conflicts with PCI mapping. Aug 1 19:06:28 koepke agpgart: Aperture from AGP @ e0000000 size 32 MB Aug 1 19:06:28 koepke agpgart: AGP aperture is 32M @ 0xe0000000 Aug 1 19:06:28 koepke PCI-DMA: Disabling IOMMU. Aug 1 19:06:28 koepke PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 Aug 1 19:06:28 koepke PCI: Bridge: 0000:00:01.0 Aug 1 19:06:28 koepke IO window: a000-afff Aug 1 19:06:28 koepke MEM window: e2100000-e21fffff Aug 1 19:06:28 koepke PREFETCH window: e8000000-efffffff Aug 1 19:06:28 koepke PCI: Bus 2, cardbus bridge: 0000:00:06.0 Aug 1 19:06:28 koepke IO window: 00002400-000024ff Aug 1 19:06:28 koepke IO window: 00002800-000028ff Aug 1 19:06:28 koepke PREFETCH window: 60000000-61ffffff Aug 1 19:06:28 koepke MEM window: 62000000-63ffffff Aug 1 19:06:28 koepke PCI: Enabling device 0000:00:06.0 (0000 -> 0003) Aug 1 19:06:28 koepke GSI 16 sharing vector 0xA9 and IRQ 16 Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 16 Aug 1 19:06:28 koepke NET: Registered protocol family 2 Aug 1 19:06:28 koepke IP route cache hash table entries: 65536 (order: 7, 524288 bytes) Aug 1 19:06:28 koepke TCP established hash table entries: 262144 (order: 9, 2097152 bytes) Aug 1 19:06:28 koepke TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Aug 1 19:06:28 koepke TCP: Hash tables configured (established 262144 bind 65536) Aug 1 19:06:28 koepke TCP reno registered Aug 1 19:06:28 koepke Simple Boot Flag at 0x38 set to 0x1 Aug 1 19:06:28 koepke IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Aug 1 19:06:28 koepke Total HugeTLB memory allocated, 0 Aug 1 19:06:28 koepke squashfs: version 3.0 (2006/03/15) Phillip Lougher Aug 1 19:06:28 koepke JFS: nTxBlock = 8192, nTxLock = 65536 Aug 1 19:06:28 koepke SGI XFS with ACLs, large block/inode numbers, no debug enabled Aug 1 19:06:28 koepke Initializing Cryptographic API Aug 1 19:06:28 koepke io scheduler noop registered Aug 1 19:06:28 koepke io scheduler anticipatory registered (default) Aug 1 19:06:28 koepke io scheduler deadline registered Aug 1 19:06:28 koepke io scheduler cfq registered Aug 1 19:06:28 koepke pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Aug 1 19:06:28 koepke acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Aug 1 19:06:28 koepke Real Time Clock Driver v1.12ac Aug 1 19:06:28 koepke Non-volatile memory driver v1.2 Aug 1 19:06:28 koepke Linux agpgart interface v0.101 (c) Dave Jones Aug 1 19:06:28 koepke [drm] Initialized drm 1.0.1 20051102 Aug 1 19:06:28 koepke sisfb: Video ROM found Aug 1 19:06:28 koepke sisfb: Video RAM at 0xe8000000, mapped to 0xffffc20000680000, size 65536k Aug 1 19:06:28 koepke sisfb: MMIO at 0xe2100000, mapped to 0xffffc20000640000, size 128k Aug 1 19:06:28 koepke sisfb: Memory heap starting at 64928K, size 32K Aug 1 19:06:28 koepke sisfb: Detected SiS302LV video bridge Aug 1 19:06:28 koepke sisfb: Detected 1280x800 flat panel Aug 1 19:06:28 koepke sisfb: Detected LCD PDC1 0x04 (for LCD=CRT1) Aug 1 19:06:28 koepke sisfb: Default mode is 1280x800x8 (60Hz) Aug 1 19:06:28 koepke sisfb: Initial vbflags 0x8000012 Aug 1 19:06:28 koepke Console: switching to colour frame buffer device 160x50 Aug 1 19:06:28 koepke sisfb: 2D acceleration is enabled, y-panning enabled (auto-max) Aug 1 19:06:28 koepke fb0: SiS 760 frame buffer device version 1.8.9 Aug 1 19:06:28 koepke sisfb: Copyright (C) 2001-2005 Thomas Winischhofer Aug 1 19:06:28 koepke ACPI: AC Adapter [ACAD] (on-line) Aug 1 19:06:28 koepke ACPI: Battery Slot [BAT1] (battery absent) Aug 1 19:06:28 koepke ACPI: Power Button (FF) [PWRF] Aug 1 19:06:28 koepke ACPI: Lid Switch [LID] Aug 1 19:06:28 koepke ACPI: Power Button (CM) [PWRB] Aug 1 19:06:28 koepke ACPI: Sleep Button (CM) [SLPB] Aug 1 19:06:28 koepke ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Aug 1 19:06:28 koepke ACPI: Thermal Zone [THRM] (60 C) Aug 1 19:06:28 koepke Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Aug 1 19:06:28 koepke GSI 17 sharing vector 0xB1 and IRQ 17 Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17 Aug 1 19:06:28 koepke ACPI: PCI interrupt for device 0000:00:02.6 disabled Aug 1 19:06:28 koepke serio: i8042 AUX port at 0x60,0x64 irq 12 Aug 1 19:06:28 koepke serio: i8042 KBD port at 0x60,0x64 irq 1 Aug 1 19:06:28 koepke mice: PS/2 mouse device common for all mice Aug 1 19:06:28 koepke input: PC Speaker as /class/input/input0 Aug 1 19:06:28 koepke input: AT Translated Set 2 keyboard as /class/input/input1 Aug 1 19:06:28 koepke Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 Aug 1 19:06:28 koepke input: SynPS/2 Synaptics TouchPad as /class/input/input2 Aug 1 19:06:28 koepke RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Aug 1 19:06:28 koepke loop: loaded (max 8 devices) Aug 1 19:06:28 koepke Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Aug 1 19:06:28 koepke ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Aug 1 19:06:28 koepke SIS5513: IDE controller at PCI slot 0000:00:02.5 Aug 1 19:06:28 koepke GSI 18 sharing vector 0xB9 and IRQ 18 Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 18 Aug 1 19:06:28 koepke SIS5513: chipset revision 0 Aug 1 19:06:28 koepke SIS5513: not 100% native mode: will probe irqs later Aug 1 19:06:28 koepke SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Aug 1 19:06:28 koepke ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio Aug 1 19:06:28 koepke ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio Aug 1 19:06:28 koepke Probing IDE interface ide0... Aug 1 19:06:28 koepke hda: IC25N080ATMR04-0, ATA DISK drive Aug 1 19:06:28 koepke ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Aug 1 19:06:28 koepke Probing IDE interface ide1... Aug 1 19:06:28 koepke hdc: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive Aug 1 19:06:28 koepke ide1 at 0x170-0x177,0x376 on irq 15 Aug 1 19:06:28 koepke hda: max request size: 512KiB Aug 1 19:06:28 koepke hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) Aug 1 19:06:28 koepke hda: cache flushes supported Aug 1 19:06:28 koepke hda: hda1 hda2 hda3 hda4 Aug 1 19:06:28 koepke hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Aug 1 19:06:28 koepke Uniform CD-ROM driver Revision: 3.20 Aug 1 19:06:28 koepke usbmon: debugfs is not available Aug 1 19:06:28 koepke md: linear personality registered for level -1 Aug 1 19:06:28 koepke md: raid0 personality registered for level 0 Aug 1 19:06:28 koepke md: raid1 personality registered for level 1 Aug 1 19:06:28 koepke md: raid5 personality registered for level 5 Aug 1 19:06:28 koepke md: raid4 personality registered for level 4 Aug 1 19:06:28 koepke raid5: automatically using best checksumming function: generic_sse Aug 1 19:06:28 koepke generic_sse: 4904.000 MB/sec Aug 1 19:06:28 koepke raid5: using function: generic_sse (4904.000 MB/sec) Aug 1 19:06:28 koepke raid6: int64x1 1468 MB/s Aug 1 19:06:28 koepke raid6: int64x2 2125 MB/s Aug 1 19:06:28 koepke raid6: int64x4 2132 MB/s Aug 1 19:06:28 koepke raid6: int64x8 1389 MB/s Aug 1 19:06:28 koepke raid6: sse2x1 630 MB/s Aug 1 19:06:28 koepke raid6: sse2x2 1108 MB/s Aug 1 19:06:28 koepke raid6: sse2x4 1828 MB/s Aug 1 19:06:28 koepke raid6: using algorithm sse2x4 (1828 MB/s) Aug 1 19:06:28 koepke md: raid6 personality registered for level 6 Aug 1 19:06:28 koepke md: multipath personality registered for level -4 Aug 1 19:06:28 koepke md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Aug 1 19:06:28 koepke md: bitmap version 4.39 Aug 1 19:06:28 koepke device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com Aug 1 19:06:28 koepke TCP bic registered Aug 1 19:06:28 koepke NET: Registered protocol family 1 Aug 1 19:06:28 koepke NET: Registered protocol family 10 Aug 1 19:06:28 koepke lo: Disabled Privacy Extensions Aug 1 19:06:28 koepke IPv6 over IPv4 tunneling driver Aug 1 19:06:28 koepke NET: Registered protocol family 17 Aug 1 19:06:28 koepke NET: Registered protocol family 15 Aug 1 19:06:28 koepke powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) Aug 1 19:06:28 koepke powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4 (1450 mV) Aug 1 19:06:28 koepke powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16 (1000 mV) Aug 1 19:06:28 koepke cpu_init done, current fid 0x8, vid 0x4 Aug 1 19:06:28 koepke Suspend2 Core. Aug 1 19:06:28 koepke Suspend2 Compression Driver loading. Aug 1 19:06:28 koepke Suspend2 Encryption Driver loading. Aug 1 19:06:28 koepke Suspend2 Swap Writer loading. Aug 1 19:06:28 koepke ACPI wakeup devices: Aug 1 19:06:28 koepke PCI0 LAN MODM USB0 USB1 USB2 USB3 Aug 1 19:06:28 koepke ACPI: (supports S0 S3 S4 S5) Aug 1 19:06:28 koepke BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Aug 1 19:06:28 koepke Freeing unused kernel memory: 220k freed Aug 1 19:06:28 koepke Suspend2 2.2.7: Swapwriter: Signature found. Aug 1 19:06:28 koepke Suspend2 2.2.7: Resuming enabled. Aug 1 19:06:28 koepke GSI 19 sharing vector 0xC1 and IRQ 19 Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 19 Aug 1 19:06:28 koepke ehci_hcd 0000:00:03.2: EHCI Host Controller Aug 1 19:06:28 koepke ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 Aug 1 19:06:28 koepke PCI: cache line size of 64 is not supported by device 0000:00:03.2 Aug 1 19:06:28 koepke ehci_hcd 0000:00:03.2: irq 19, io mem 0xe2004000 Aug 1 19:06:28 koepke ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Aug 1 19:06:28 koepke usb usb1: configuration #1 chosen from 1 choice Aug 1 19:06:28 koepke hub 1-0:1.0: USB hub found Aug 1 19:06:28 koepke hub 1-0:1.0: 6 ports detected Aug 1 19:06:28 koepke usbcore: registered new driver hiddev Aug 1 19:06:28 koepke usbcore: registered new driver usbhid Aug 1 19:06:28 koepke drivers/usb/input/hid-core.c: v2.6:USB HID core driver Aug 1 19:06:28 koepke Initializing USB Mass Storage driver... Aug 1 19:06:28 koepke usbcore: registered new driver usb-storage Aug 1 19:06:28 koepke USB Mass Storage support registered. Aug 1 19:06:28 koepke USB Universal Host Controller Interface driver v3.0 Aug 1 19:06:28 koepke ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Aug 1 19:06:28 koepke GSI 20 sharing vector 0xC9 and IRQ 20 Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 Aug 1 19:06:28 koepke ohci_hcd 0000:00:03.0: OHCI Host Controller Aug 1 19:06:28 koepke ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Aug 1 19:06:28 koepke ohci_hcd 0000:00:03.0: irq 20, io mem 0xe2002000 Aug 1 19:06:28 koepke usb usb2: configuration #1 chosen from 1 choice Aug 1 19:06:28 koepke hub 2-0:1.0: USB hub found Aug 1 19:06:28 koepke hub 2-0:1.0: 3 ports detected Aug 1 19:06:28 koepke GSI 21 sharing vector 0xD1 and IRQ 21 Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 Aug 1 19:06:28 koepke ohci_hcd 0000:00:03.1: OHCI Host Controller Aug 1 19:06:28 koepke ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Aug 1 19:06:28 koepke ohci_hcd 0000:00:03.1: irq 21, io mem 0xe2003000 Aug 1 19:06:28 koepke usb usb3: configuration #1 chosen from 1 choice Aug 1 19:06:28 koepke hub 3-0:1.0: USB hub found Aug 1 19:06:28 koepke hub 3-0:1.0: 3 ports detected Aug 1 19:06:28 koepke ieee1394: Initialized config rom entry `ip1394' Aug 1 19:06:28 koepke ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) Aug 1 19:06:28 koepke ieee1394: sbp2: Try serialize_io=0 for better performance Aug 1 19:06:28 koepke libata version 1.20 loaded. Aug 1 19:06:28 koepke ReiserFS: hda4: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda4 Aug 1 19:06:28 koepke kjournald starting. Commit interval 5 seconds Aug 1 19:06:28 koepke EXT3-fs: hda4: orphan cleanup on readonly fs Aug 1 19:06:28 koepke ext3_orphan_cleanup: deleting unreferenced inode 1769705 Aug 1 19:06:28 koepke EXT3-fs: hda4: 1 orphan inode deleted Aug 1 19:06:28 koepke EXT3-fs: recovery complete. Aug 1 19:06:28 koepke EXT3-fs: mounted filesystem with ordered data mode. Aug 1 19:06:28 koepke Adding 1943856k swap on /dev/hda3. Priority:-1 extents:1 across:1943856k Aug 1 19:06:28 koepke EXT3 FS on hda4, internal journal Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17 Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17 Aug 1 19:06:28 koepke intel8x0_measure_ac97_clock: measured 55445 usecs Aug 1 19:06:28 koepke intel8x0: clocking to 48000 Aug 1 19:06:28 koepke sis900.c: v1.08.09 Sep. 19 2005 Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16 Aug 1 19:06:28 koepke 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. Aug 1 19:06:28 koepke 0000:00:04.0: Using transceiver found at address 13 as default Aug 1 19:06:28 koepke eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 16, 00:c0:9f:e4:9e:8e. Aug 1 19:06:28 koepke ieee80211_crypt: registered algorithm 'NULL' Aug 1 19:06:28 koepke ieee80211: 802.11 data/management/control stack, git-1.1.7 Aug 1 19:06:28 koepke ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> Aug 1 19:06:28 koepke bcm43xx driver Aug 1 19:06:28 koepke GSI 22 sharing vector 0xD9 and IRQ 22 Aug 1 19:06:28 koepke ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 22 Aug 1 19:06:28 koepke bcm43xx: Chip ID 0x4318, rev 0x2 Aug 1 19:06:28 koepke bcm43xx: Number of cores: 4 Aug 1 19:06:28 koepke bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled Aug 1 19:06:28 koepke bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled Aug 1 19:06:28 koepke bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled Aug 1 19:06:28 koepke bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled Aug 1 19:06:28 koepke bcm43xx: PHY connected Aug 1 19:06:28 koepke bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7 Aug 1 19:06:28 koepke bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) Aug 1 19:06:28 koepke bcm43xx: Radio turned off Aug 1 19:06:28 koepke bcm43xx: Radio turned off Aug 1 19:06:28 koepke ip_tables: (C) 2000-2006 Netfilter Core Team Aug 1 19:06:28 koepke ip_conntrack version 2.4 (8192 buckets, 65536 max) - 240 bytes per conntrack Aug 1 19:06:30 koepke nmbd[10404]: [2006/08/01 19:06:30, 0] nmbd/asyncdns.c:start_async_dns(151) Aug 1 19:06:30 koepke nmbd[10404]: started asyncdns process 10405 Aug 1 19:06:30 koepke nmbd[10404]: [2006/08/01 19:06:30, 0] nmbd/nmbd_subnetdb.c:create_subnets(217) Aug 1 19:06:30 koepke nmbd[10404]: create_subnets: No local interfaces ! Aug 1 19:06:30 koepke nmbd[10404]: [2006/08/01 19:06:30, 0] nmbd/nmbd_subnetdb.c:create_subnets(218) Aug 1 19:06:30 koepke nmbd[10404]: create_subnets: Waiting for an interface to appear ... Aug 1 19:06:30 koepke sshd[10453]: Server listening on :: port 22. Aug 1 19:06:30 koepke sshd[10453]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use. Aug 1 19:06:31 koepke cron[10489]: (CRON) STARTUP (V5.0) #### starting suspend to ram Aug 1 19:08:50 koepke ACPI: PCI interrupt for device 0000:00:0b.0 disabled Aug 1 19:08:50 koepke ACPI: PCI interrupt for device 0000:00:02.6 disabled Aug 1 19:08:50 koepke ohci_hcd 0000:00:03.1: remove, state 4 Aug 1 19:08:50 koepke usb usb3: USB disconnect, address 1 Aug 1 19:08:50 koepke ohci_hcd 0000:00:03.1: USB bus 3 deregistered Aug 1 19:08:50 koepke ACPI: PCI interrupt for device 0000:00:03.1 disabled Aug 1 19:08:50 koepke ohci_hcd 0000:00:03.0: remove, state 4 Aug 1 19:08:50 koepke usb usb2: USB disconnect, address 1 Aug 1 19:08:50 koepke ohci_hcd 0000:00:03.0: USB bus 2 deregistered Aug 1 19:08:50 koepke ACPI: PCI interrupt for device 0000:00:03.0 disabled Aug 1 19:08:50 koepke usbcore: deregistering driver usb-storage Aug 1 19:08:51 koepke usbcore: deregistering driver usbhid Aug 1 19:08:51 koepke usbcore: deregistering driver hiddev Aug 1 19:08:51 koepke ehci_hcd 0000:00:03.2: remove, state 1 Aug 1 19:08:51 koepke usb usb1: USB disconnect, address 1 Aug 1 19:08:51 koepke ehci_hcd 0000:00:03.2: USB bus 1 deregistered Aug 1 19:08:51 koepke ACPI: PCI interrupt for device 0000:00:03.2 disabled Aug 1 19:08:52 koepke ieee80211_crypt: unregistered algorithm 'NULL' #### end of suspend
This is duplicateable with a "fresh" gentoo install with basic xorg-x11 in a x86 environment.
please confirm that 2.6.16 worked properly.
I can confirm that 2.6.14 with gentoo patches worked. I haven't tried 2.6.16 though.
2.6.16 indefinetly works, same gentoo installation with different kernel, EXACT SAME KERNEL CONFIG. diff /usr/src/linux-2.6.17 /usr/src/linux-2.6.16 returns only the name and non compiled options. also, could Matija Suklje specify laptop type (exact same as mine?) and try and duplicate this error.
here is my kernel config, also I have tried suspending without the softmac and bcm43xx driver in the kernel. (compiled about 20 kernels trying to fix this myself) # # Automatically generated make config: don't edit # Linux kernel version: 2.6.17-suspend2-r3 # Wed Aug 2 20:39:28 2006 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_VM86=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Block layer # CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set CONFIG_MK8=y # CONFIG_MPSC is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y # CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_REORDER is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y # # Power management options # CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # CONFIG_SOFTWARE_SUSPEND is not set CONFIG_SUSPEND2_CRYPTO=y CONFIG_SUSPEND2=y # # Image Storage (you need at least one writer) # # CONFIG_SUSPEND2_FILEWRITER is not set CONFIG_SUSPEND2_SWAPWRITER=y # # General Options # CONFIG_SUSPEND2_DEFAULT_RESUME2="" # CONFIG_SUSPEND2_KEEP_IMAGE is not set CONFIG_SUSPEND_SHARED=y # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_ACPI_HOTPLUG_MEMORY is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y CONFIG_X86_ACPI_CPUFREQ=y # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set CONFIG_HOTPLUG_PCI_ACPI=y # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m CONFIG_NET_KEY=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y # CONFIG_IPV6_ROUTER_PREF is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m # CONFIG_IP_NF_CT_ACCT is not set # CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_CONNTRACK_EVENTS is not set # CONFIG_IP_NF_CT_PROTO_SCTP is not set CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m # CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m # CONFIG_IP_NF_MATCH_TOS is not set # CONFIG_IP_NF_MATCH_RECENT is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_DSCP is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set # CONFIG_IP_NF_MATCH_OWNER is not set # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_HASHLIMIT is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_TARGET_TCPMSS is not set # CONFIG_IP_NF_NAT is not set # CONFIG_IP_NF_MANGLE is not set # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_ARPTABLES is not set # # IPv6: Netfilter Configuration (EXPERIMENTAL) # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m # # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=m # CONFIG_NET_ACT_GACT is not set # CONFIG_NET_ACT_MIRRED is not set # CONFIG_NET_ACT_IPT is not set # CONFIG_NET_ACT_PEDIT is not set # CONFIG_NET_ACT_SIMP is not set CONFIG_NET_CLS_IND=y CONFIG_NET_ESTIMATOR=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m # CONFIG_BT_RFCOMM is not set # CONFIG_BT_BNEP is not set # CONFIG_BT_CMTP is not set CONFIG_BT_HIDP=m # # Bluetooth device drivers # CONFIG_BT_HCIUSB=m # CONFIG_BT_HCIUSB_SCO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set CONFIG_IEEE80211=m CONFIG_IEEE80211_DEBUG=y CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IEEE80211_SOFTMAC=m CONFIG_IEEE80211_SOFTMAC_DEBUG=y CONFIG_WIRELESS_EXT=y # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_PC_SUPERIO=y CONFIG_PARPORT_NOT_PC=y # CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_1284=y # # Plug and Play support # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=m CONFIG_PARIDE=m CONFIG_PARIDE_PARPORT=m # # Parallel IDE high-level drivers # CONFIG_PARIDE_PD=m CONFIG_PARIDE_PCD=m CONFIG_PARIDE_PF=m CONFIG_PARIDE_PT=m CONFIG_PARIDE_PG=m # # Parallel IDE protocol modules # CONFIG_PARIDE_ATEN=m CONFIG_PARIDE_BPCK=m CONFIG_PARIDE_COMM=m CONFIG_PARIDE_DSTR=m CONFIG_PARIDE_FIT2=m CONFIG_PARIDE_FIT3=m CONFIG_PARIDE_EPAT=m CONFIG_PARIDE_EPATC8=y CONFIG_PARIDE_EPIA=m CONFIG_PARIDE_FRIQ=m CONFIG_PARIDE_FRPW=m CONFIG_PARIDE_KBIC=m CONFIG_PARIDE_KTTI=m CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m # CONFIG_CISS_SCSI_TAPE is not set CONFIG_BLK_DEV_DAC960=m CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_SX8=m # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_BLK_DEV_IDESCSI=m # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_IDEDMA_FORCED=y CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set CONFIG_BLK_DEV_ALI15X3=m # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set CONFIG_BLK_DEV_CMD64X=m CONFIG_BLK_DEV_TRIFLEX=m CONFIG_BLK_DEV_CY82C693=m CONFIG_BLK_DEV_CS5520=m CONFIG_BLK_DEV_CS5530=m CONFIG_BLK_DEV_HPT34X=m # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=m CONFIG_BLK_DEV_SC1200=m CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=m CONFIG_BLK_DEV_PDC202XX_OLD=m CONFIG_PDC202XX_BURST=y CONFIG_BLK_DEV_PDC202XX_NEW=m CONFIG_BLK_DEV_SVWKS=m # CONFIG_BLK_DEV_SIIMAGE is not set CONFIG_BLK_DEV_SIS5513=y CONFIG_BLK_DEV_SLC90E66=m CONFIG_BLK_DEV_TRM290=m CONFIG_BLK_DEV_VIA82CXXX=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_AIC7XXX_OLD is not set CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_ENABLE_RD_STRM is not set # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set CONFIG_SCSI_SATA_SVW=m CONFIG_SCSI_ATA_PIIX=m # CONFIG_SCSI_SATA_MV is not set CONFIG_SCSI_SATA_NV=m # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set CONFIG_SCSI_SATA_PROMISE=m CONFIG_SCSI_SATA_SX4=m CONFIG_SCSI_SATA_SIL=m # CONFIG_SCSI_SATA_SIL24 is not set CONFIG_SCSI_SATA_SIS=m # CONFIG_SCSI_SATA_ULI is not set CONFIG_SCSI_SATA_VIA=m CONFIG_SCSI_SATA_VITESSE=m CONFIG_SCSI_SATA_INTEL_COMBINED=y CONFIG_SCSI_BUSLOGIC=m # CONFIG_SCSI_OMIT_FLASHPOINT is not set CONFIG_SCSI_DMX3191D=m CONFIG_SCSI_EATA=m # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_IPS=m # CONFIG_SCSI_INITIO is not set CONFIG_SCSI_INIA100=m CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m CONFIG_SCSI_IZIP_EPP16=y # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_IPR=m # CONFIG_SCSI_IPR_TRACE is not set # CONFIG_SCSI_IPR_DUMP is not set CONFIG_SCSI_QLOGIC_1280=m # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=m # CONFIG_SCSI_DEBUG is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y # CONFIG_MD_RAID5_RESHAPE is not set CONFIG_MD_RAID6=y CONFIG_MD_MULTIPATH=y # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_BLK_DEV_DM_BBR is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y CONFIG_IEEE1394_CONFIG_ROM_IP1394=y # CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers # # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=m # # Protocol Drivers # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y # CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m # CONFIG_TYPHOON is not set # # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_NAPI is not set CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m # CONFIG_ULI526X is not set CONFIG_HP100=m CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m # CONFIG_AMD8111E_NAPI is not set CONFIG_ADAPTEC_STARFIRE=m # CONFIG_ADAPTEC_STARFIRE_NAPI is not set CONFIG_B44=m CONFIG_FORCEDETH=m CONFIG_DGRS=m # CONFIG_EEPRO100 is not set CONFIG_E100=m CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_8139CP=m CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=m CONFIG_EPIC100=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m # CONFIG_R8169_NAPI is not set # CONFIG_R8169_VLAN is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set CONFIG_SK98LIN=m # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set # CONFIG_S2IO is not set # # Token Ring devices # CONFIG_TR=y # CONFIG_IBMOL is not set CONFIG_3C359=m # CONFIG_TMS380TR is not set # # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y # CONFIG_NET_WIRELESS_RTNETLINK is not set # # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set # # Wireless 802.11b ISA/PCI cards support # # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_AIRO is not set CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m # CONFIG_NORTEL_HERMES is not set # CONFIG_PCI_HERMES is not set # CONFIG_ATMEL is not set # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=m # CONFIG_HOSTAP is not set CONFIG_BCM43XX=m CONFIG_BCM43XX_DEBUG=y CONFIG_BCM43XX_DMA=y CONFIG_BCM43XX_PIO=y CONFIG_BCM43XX_DMA_AND_PIO_MODE=y # CONFIG_BCM43XX_DMA_MODE is not set # CONFIG_BCM43XX_PIO_MODE is not set CONFIG_NET_WIRELESS=y # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PLIP=m CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set CONFIG_NET_FC=y # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=m CONFIG_NETPOLL=y # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem # CONFIG_ISDN=m # # Old ISDN4Linux # # CONFIG_ISDN_I4L is not set # # CAPI subsystem # CONFIG_ISDN_CAPI=m # CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set # CONFIG_ISDN_CAPI_MIDDLEWARE is not set CONFIG_ISDN_CAPI_CAPI20=m # # CAPI hardware drivers # # # Active AVM cards # # CONFIG_CAPI_AVM is not set # # Active Eicon DIVA Server cards # # CONFIG_CAPI_EICON is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set CONFIG_GAMEPORT=m # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set # CONFIG_GAMEPORT_FM801 is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set CONFIG_ROCKETPORT=m # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set CONFIG_SYNCLINK=m CONFIG_SYNCLINKMP=m # CONFIG_SYNCLINK_GT is not set CONFIG_N_HDLC=m # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set # CONFIG_I8XX_TCO is not set # CONFIG_SC1200_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y CONFIG_AGP_AMD64=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_DRM=y CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m # CONFIG_DRM_MGA is not set CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # CONFIG_I2C=y CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set CONFIG_I2C_AMD8111=m # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_ISA=m CONFIG_I2C_NFORCE2=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set CONFIG_I2C_VIAPRO=m # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y CONFIG_HWMON_VID=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m # CONFIG_SENSORS_ADM1026 is not set CONFIG_SENSORS_ADM1031=m # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set CONFIG_SENSORS_DS1621=m # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_IT87=m # CONFIG_SENSORS_LM63 is not set CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set CONFIG_SENSORS_MAX1619=m # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT8231 is not set CONFIG_SENSORS_W83781D=m # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set CONFIG_SENSORS_W83627HF=m # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=m # # Video Capture Adapters # # # Video Capture Adapters # # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_VIVI is not set CONFIG_VIDEO_BT848=m # CONFIG_VIDEO_SAA6588 is not set CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_W9966=m CONFIG_VIDEO_CPIA=m CONFIG_VIDEO_CPIA_PP=m CONFIG_VIDEO_CPIA_USB=m # CONFIG_VIDEO_CPIA2 is not set CONFIG_VIDEO_SAA5246A=m CONFIG_VIDEO_SAA5249=m CONFIG_TUNER_3036=m CONFIG_VIDEO_STRADIS=m CONFIG_VIDEO_ZORAN=m CONFIG_VIDEO_ZORAN_BUZ=m CONFIG_VIDEO_ZORAN_DC10=m CONFIG_VIDEO_ZORAN_DC30=m CONFIG_VIDEO_ZORAN_LML33=m CONFIG_VIDEO_ZORAN_LML33R10=m CONFIG_VIDEO_SAA7134=m # CONFIG_VIDEO_SAA7134_ALSA is not set CONFIG_VIDEO_MXB=m CONFIG_VIDEO_DPC=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_CX88=m # CONFIG_VIDEO_CX88_ALSA is not set CONFIG_VIDEO_OVCAMCHIP=m # # Encoders and Decoders # CONFIG_VIDEO_MSP3400=m # CONFIG_VIDEO_CS53L32A is not set # CONFIG_VIDEO_WM8775 is not set # CONFIG_VIDEO_WM8739 is not set # CONFIG_VIDEO_CX25840 is not set # CONFIG_VIDEO_SAA711X is not set # CONFIG_VIDEO_SAA7127 is not set # CONFIG_VIDEO_UPD64031A is not set # CONFIG_VIDEO_UPD64083 is not set # # V4L USB devices # # CONFIG_VIDEO_EM28XX is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_ET61X251 is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_W9968CF is not set # CONFIG_USB_ZC0301 is not set # CONFIG_USB_PWC is not set # # Radio Adapters # CONFIG_RADIO_GEMTEK_PCI=m CONFIG_RADIO_MAXIRADIO=m CONFIG_RADIO_MAESTRO=m # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_VIDEO_VIDEOBUF=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_BUF=m CONFIG_VIDEO_BTCX=m CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y CONFIG_FB_VESA_STD=y # CONFIG_FB_VESA_TNG is not set CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SAVAGE is not set CONFIG_FB_SIS=y # CONFIG_FB_SIS_300 is not set CONFIG_FB_SIS_315=y # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set CONFIG_FB_SPLASH=y # # Speakup console speech # # CONFIG_SPEAKUP is not set CONFIG_SPEAKUP_DEFAULT="none" # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y # CONFIG_SND_SEQUENCER_OSS is not set CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_AC97_CODEC=m CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Network Adapters # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_GL620A is not set CONFIG_USB_NET_NET1080=m # CONFIG_USB_NET_PLUSB is not set # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_USB_NET_ZAURUS=m # CONFIG_USB_ZD1201 is not set CONFIG_USB_MON=y # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set CONFIG_USB_AUERSWALD=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set # # Real Time Clock # # CONFIG_RTC_CLASS is not set # # Firmware Drivers # CONFIG_EDD=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_REISERFS_FS_SECURITY is not set CONFIG_JFS_FS=y CONFIG_JFS_POSIX_ACL=y # CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_SQUASHFS=y # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_SQUASHFS_VMALLOC is not set # CONFIG_VXFS_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # # Instrumentation Support # # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set # CONFIG_UNWIND_INFO is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set CONFIG_SECURITY_CAPABILITIES=m # CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_SECLVL is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=y # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZF=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # # Library routines # CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_DYN_PAGEFLAGS=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m
hmm, this may be a problem more specific to vbetool.(Fist Thing usually logged before state is fully restored). Have there been problems with vbetool in 2.6.17?
Hmm, 2.6.18 works again, weird.