Bug 6544 - sky2 does not see DGE-560T NIC in 2.6.17-rc3/4
Summary: sky2 does not see DGE-560T NIC in 2.6.17-rc3/4
Status: RESOLVED CODE_FIX
Alias: None
Product: Drivers
Classification: Unclassified
Component: Network (show other bugs)
Hardware: i386 Linux
: P2 normal
Assignee: Stephen Hemminger
URL:
Keywords:
Depends on:
Blocks:
 
Reported: 2006-05-13 13:04 UTC by Brian Hall
Modified: 2006-05-19 07:31 UTC (History)
1 user (show)

See Also:
Kernel Version: 2.6.17-rc4
Subsystem:
Regression: ---
Bisected commit-id:

Attachments
Move dge-560t to correct driver (1.42 KB, patch)
2006-05-16 13:59 UTC, Stephen Hemminger 		Details | Diff
Add an attachment (proposed patch, testcase, etc.)

Description Brian Hall 2006-05-13 13:04:12 UTC 
Most recent kernel where this bug did not occur: 2.6.16.9
Distribution: Gentoo 2006.0
Hardware Environment: DGE-560T 88EE8052 / Opteron 165 / Asrock 939Dual-Sata2
Software Environment: Linux
Problem Description:

sky2 driver does not see my DGE-560T NIC in 2.6.17-rc3 or -rc4 (sky v1.3). An
earlier version of the sky2 driver (v 0.15) in 2.6.16.9 it does see the device
and it operates properly. After booting 2.6.17-rc3/4, "dmesg|grep -i sky2" shows
nothing. "modprobe -r sky2; modprobe sky2 debug=16" also shows nothing, although
the module does load OK (shown by lsmod).

DGE-560T uses the Marvel 88EE8052 chip.

Steps to reproduce:
modprobe sky2

lspci:

00:00.0 Host bridge: ALi Corporation M1695 K8 Northbridge [PCI Express and HyperTra
nsport]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-
        Latency: 0
        Capabilities: [40] HyperTransport: Slave or Primary Interface
                Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir- DUL-
                Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 
IsocEn- LSEn- ExtCTL- 64b-
                Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwF
cInEn- LWO=16bit DwFcOutEn-
                Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 
IsocEn- LSEn- ExtCTL- 64b-
                Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFc
InEn- LWO=16bit DwFcOutEn-
                Revision ID: 1.05
                Link Frequency 0: 800MHz
                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz
+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
                Link Frequency 1: 200MHz
                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 1: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz
+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
                Error Handling: PFlE+ OFlE+ PFE+ OFE+ EOCFE+ RFE+ CRCFE+ SERRFE- CF
+ RE- PNFE+ ONFE+ EOCNFE+ RNFE- CRCNFE+ SERRNFE-
                Prefetchable memory behind bridge Upper: 00-00
                Bus Number: 00
        Capabilities: [5c] HyperTransport: MSI Mapping
        Capabilities: [68] HyperTransport: UnitID Clumping
        Capabilities: [74] HyperTransport: Interrupt Discovery and Configuration
        Capabilities: [7c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
                Address: 00000000fee00000  Data: 0000

00:01.0 PCI bridge: ALi Corporation Unknown device 524b (prog-if 00 [Normal decode]
)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-
        Latency: 0, Cache Line Size 10
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: ff200000-ff2fffff
        Prefetchable memory behind bridge: fff00000-000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D
3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
                Address: 00000000fee00000  Data: 40c1

        Capabilities: [58] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
                Link: Latency L0s <2us, L1 <32us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
                Slot: Number 0, PowerLimit 0.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Off, PwrInd Off, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [7c] HyperTransport: MSI Mapping
        Capabilities: [88] HyperTransport: Revision ID: 1.05
        Capabilities: [100] Virtual Channel
        Capabilities: [11c] Advanced Error Reporting

00:02.0 PCI bridge: ALi Corporation Unknown device 524c (prog-if 00 [Normal decode]
)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR+ <PERR-
        Latency: 0, Cache Line Size 10
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: ff300000-ff3fffff
        Prefetchable memory behind bridge: 50000000-500fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D
3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
                Address: 00000000fee00000  Data: 40c9
        Capabilities: [58] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x2, ASPM L0s L1, Port 0
                Link: Latency L0s <2us, L1 <32us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x2
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
                Slot: Number 0, PowerLimit 0.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Off, PwrInd Off, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [7c] HyperTransport: MSI Mapping
        Capabilities: [88] HyperTransport: Revision ID: 1.05

        Capabilities: [100] Virtual Channel
        Capabilities: [11c] Advanced Error Reporting

00:04.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: [40] HyperTransport: Slave or Primary Interface
                Command: BaseUnitID=4 UnitCnt=1 MastHost- DefDir- DUL-
                Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 
IsocEn- LSEn- ExtCTL- 64b-
                Link Config 0: MLWI=16bit DwFcIn- MLWO=8bit DwFcOut- LWI=16bit DwFc
InEn- LWO=8bit DwFcOutEn-
                Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 
IsocEn- LSEn- ExtCTL- 64b-
                Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcIn
En- LWO=8bit DwFcOutEn-
                Revision ID: 1.04
                Link Frequency 0: 800MHz
                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz
+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
                Link Frequency 1: 200MHz
                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz
- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF
- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
                Prefetchable memory behind bridge Upper: 00-00
                Bus Number: 00
        Capabilities: [60] HyperTransport: Interrupt Discovery and Configuration
        Capabilities: [80] AGP version 3.0
                Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit
- FW- AGP3+ Rate=x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4

00:05.0 PCI bridge: ALi Corporation AGP8X Controller (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
        I/O behind bridge: 0000a000-0000cfff
        Memory behind bridge: ff400000-ff4fffff
        Prefetchable memory behind bridge: 9ff00000-bfefffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge (prog-if 01 [Subtractiv
e decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: ff500000-ff5fffff
        Prefetchable memory behind bridge: fff00000-000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
        Subsystem: ASRock Incorporation Unknown device 1563
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 0 (250ns min, 6000ns max)

00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
        Subsystem: ASRock Incorporation Unknown device 7101
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-

00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7) (prog-if 8a [Master SecP 
PriP])
        Subsystem: ASRock Incorporation Unknown device 5229
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin A routed to IRQ 209
        Region 4: I/O ports at ff00 [size=16]

00:12.1 IDE interface: ALi Corporation ULi 5289 SATA (rev 10) (prog-if 8f [Master S
ecP SecO PriP PriO])
        Subsystem: ASRock Incorporation Unknown device 5289
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size 10
        Interrupt: pin A routed to IRQ 209
        Region 0: I/O ports at ec00 [size=8]
        Region 1: I/O ports at e880 [size=4]
        Region 2: I/O ports at e800 [size=8]
        Region 3: I/O ports at e480 [size=4]
        Region 4: I/O ports at e400 [size=16]

00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OH
CI])
        Subsystem: ASRock Incorporation Unknown device 5237
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), Cache Line Size 10
        Interrupt: pin A routed to IRQ 233
        Region 0: Memory at ff6ff000 (32-bit, non-prefetchable) [size=4K]

00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OH
CI])
        Subsystem: ASRock Incorporation Unknown device 5237
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), Cache Line Size 10
        Interrupt: pin B routed to IRQ 50
        Region 0: Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]

00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OH
CI])
        Subsystem: ASRock Incorporation Unknown device 5237
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), Cache Line Size 10
        Interrupt: pin C routed to IRQ 217
        Region 0: Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K]

00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) (prog-if 20 [EH
CI])
        Subsystem: ASRock Incorporation Unknown device 5239
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32 (4000ns min, 8000ns max), Cache Line Size 10
        Interrupt: pin D routed to IRQ 58
        Region 0: Memory at ff6fcc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D
3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransp
ort Technology Configuration
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-
        Capabilities: [80] HyperTransport: Host or Secondary Interface
                !!! Possibly incomplete decoding
                Command: WarmRst+ DblEnd-
                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
                Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
                Revision ID: 1.02
  00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Contro
ller
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneo
us Control
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-

02:00.0 Ethernet controller: D-Link System Inc Unknown device 4b00 (rev 11)
        Subsystem: D-Link System Inc Unknown device 4b00
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MA
bort- >SERR- <PERR-
        Latency: 0, Cache Line Size 10
        Interrupt: pin A routed to IRQ 225
        Region 0: Memory at ff3fc000 (64-bit, non-prefetchable) [size=16K]
        Region 2: I/O ports at 9800 [size=256]
        Expansion ROM at 50000000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D
3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [50] Vital Product Data
        Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express Legacy Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 214
                Link: Latency L0s <256ns, L1 unlimited
                Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [100] Advanced Error Reporting

03:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev
 01) (prog-if 00 [VGA])
        Subsystem: PC Partner Limited Unknown device 7c26
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
             Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min), Cache Line Size 10
        Interrupt: pin A routed to IRQ 66
        Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at c000 [size=256]
        Region 2: Memory at ff4f0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at ff4c0000 [disabled] [size=128K]
        Capabilities: [58] AGP version 3.0
                Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bi
t- FW+ AGP3+ Rate=x4,x8
                Command: RQ=28 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D
3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

03:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary)
 (rev 01)
        Subsystem: PC Partner Limited Unknown device 7c27
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min), Cache Line Size 10
        Region 0: Memory at a8000000 (32-bit, prefetchable) [size=128M]
        Region 1: Memory at ff4e0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D
3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
        Subsystem: Creative Labs CT4831 SBLive! Value
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 217
        Region 0: I/O ports at d880 [size=32]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D
3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
        Subsystem: Creative Labs Gameport Joystick
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32
        Region 0: I/O ports at dc00 [size=8]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D
3cold-)
        Latency: 32 (2000ns min), Cache Line Size 10
        Interrupt: pin A routed to IRQ 66
        Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at c000 [size=256]
        Region 2: Memory at ff4f0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at ff4c0000 [disabled] [size=128K]
        Capabilities: [58] AGP version 3.0
                Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bi
t- FW+ AGP3+ Rate=x4,x8
                Command: RQ=28 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D
3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

03:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary)
 (rev 01)
        Subsystem: PC Partner Limited Unknown device 7c27
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min), Cache Line Size 10
        Region 0: Memory at a8000000 (32-bit, prefetchable) [size=128M]
        Region 1: Memory at ff4e0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D
3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
        Subsystem: Creative Labs CT4831 SBLive! Value
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 217
        Region 0: I/O ports at d880 [size=32]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D
3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
        Subsystem: Creative Labs Gameport Joystick
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppin
g- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <
MAbort- >SERR- <PERR-
        Latency: 32
        Region 0: I/O ports at dc00 [size=8]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D
3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Comment 1 Stephen Hemminger 2006-05-16 13:59:47 UTC 
Created attachment 8121 [details]
Move dge-560t to correct driver

There was confusion about which driver the dge-560t belonged to.
Comment 2 Adrian Bunk 2006-05-17 17:11:16 UTC 
This patch seems to be 2.6.17 material (it fixes a regression from 2.6.16)?
Comment 3 Stephen Hemminger 2006-05-18 13:45:45 UTC 
Fix submitted for 2.6.17 already.
Comment 4 Brian Hall 2006-05-19 07:31:36 UTC 
I can confirm the patch fixed my "not seeing NIC on boot" problem.

> dmesg|grep sky2
sky2 v1.3 addr 0xff3fc000 irq 23 Yukon-EC (0xb6) rev 1
sky2 eth0: addr 00:00:5a:70:86:49
sky2 eth0: enabling interface
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
Note You need to log in before you can comment on or make changes to this bug.