Most recent kernel where this bug did not occur: Distribution: Slackware Current Hardware Environment: Sony VAIO VGN-FE11S Software Environment: Linux Slackware Current Problem Description: Hotkeys don't work at all. Sonypi module for VAIO and sony_acpi module don't support this model. Steps to reproduce: linux 2.6.15.6 (and all other precedent kernel versions on VAIO VGN-FE11S) ATTACHED OUTPUTS: ################################## DMESG ###################################### Linux version 2.6.15.6 (root@doomsday) (gcc version 3.4.5) #2 SMP PREEMPT Wed Mar 8 22:20:46 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c2000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) BIOS-e820: 000000003fe90000 - 000000003fe9a000 (ACPI data) BIOS-e820: 000000003fe9a000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f7330 On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f7260 ACPI: RSDT (v001 Sony Capell00 0x20060106 PTL 0x00000000) @ 0x3fe931e1 ACPI: FADT (v002 Sony J3 0x20060106 PTL 0x0000005a) @ 0x3fe99e10 ACPI: MADT (v001 Sony J3 0x20060106 PTL 0x0000005a) @ 0x3fe99e94 ACPI: BOOT (v001 Sony J3 0x20060106 PTL 0x00000001) @ 0x3fe99fd8 ACPI: MCFG (v001 Sony J3 0x20060106 PTL 0x0000005a) @ 0x3fe99f34 ACPI: MADT (v001 Sony J3 0x20060106 PTL 0x00000000) @ 0x3fe99f70 ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050228) @ 0x3fe94249 ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050228) @ 0x3fe93bad ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0x3fe93225 ACPI: DSDT (v001 Sony J3 0x20060106 PTL 0x20050228) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: 2 duplicate APIC table ignored. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1 already used, trying 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists Kernel command line: BOOT_IMAGE=Linux ro root=806 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1828.886 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 904356k/917504k available (2251k kernel code, 12724k reserved, 814k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3663.56 BogoMIPS (lpj=1831780) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.07 BogoMIPS (lpj=1828538) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 Total of 2 processors activated (7320.63 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd863, last bus=10 PCI: Using MMCONFIG ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15) ACPI: Embedded Controller [EC] (gpe 23) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d0000000-d1ffffff PREFETCH window: b0000000-bfffffff PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: c8000000-c9ffffff PREFETCH window: c0000000-c1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: ca000000-cbffffff PREFETCH window: c2000000-c3ffffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: cc000000-cdffffff PREFETCH window: c4000000-c5ffffff PCI: Bridge: 0000:00:1c.3 IO window: 5000-5fff MEM window: ce000000-cfffffff PREFETCH window: c6000000-c7ffffff PCI: Bus 11, cardbus bridge: 0000:0a:03.0 IO window: 00006400-000064ff IO window: 00006800-000068ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 6000-6fff MEM window: d2000000-d20fffff PREFETCH window: 50000000-51ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:0a:03.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 16 (level, low) -> IRQ 16 Simple Boot Flag at 0x36 set to 0x1 IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.25 [Flags: R/W]. fuse init (API version 7.3) Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] vesafb: NVIDIA Corporation, G72 Board - sms10 , Chip Rev (OEM: NVIDIA) vesafb: VBE version: 3.0 vesafb: VBIOS/hardware doesn't support DDC transfers vesafb: no monitor limits have been set vesafb: scrolling: redraw Console: switching to colour frame buffer device 128x48 vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 6144k, total 65536k fb0: VESA VGA frame buffer device ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Power Button (CM) [PWRB] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [TZ00] (53 C) ACPI: Thermal Zone [TZ01] (53 C) hw_random: RNG not detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com nbd: registered device at major 43 e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI e100: Copyright(c) 1999-2005 Intel Corporation PCI: Enabling device 0000:0a:08.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 20 e100: eth0: e100_probe: addr 0xd2005000, irq 20, MAC addr 00:13:A9:0E:28:C4 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH7: chipset revision 2 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x18C8 ctl 0x18AE bmdma 0x18B0 irq 21 ata2: SATA max UDMA/133 cmd 0x18C0 ctl 0x18AA bmdma 0x18B8 irq 21 ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:bf09 87:6063 88:203f ata1: dev 0 ATA-7, max UDMA/100, 312581808 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix ATA: abnormal status 0x7F on port 0x18C7 ata2: disabling port scsi1 : ata_piix Vendor: ATA Model: FUJITSU MHV2160B Rev: 0000 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 16 (level, low) -> IRQ 16 Yenta: CardBus bridge found at 0000:0a:03.0 [104d:81ef] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 22, io mem 0xd2304000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 22, io base 0x00001800 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-8: new high speed USB device using ehci_hcd and address 4 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.5 wbsd: Copyright(c) Pierre Ossman NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered ip_conntrack version 2.4 (7168 buckets, 57344 max) - 172 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Suspend2 Core. Suspend2 Compression Driver loading. Suspend2 Encryption Driver loading. Suspend2 Swap Writer loading. Suspend2 FileWriter loading. ACPI wakeup devices: PWRB PXS1 PXS2 PXS4 PXS5 PXS6 USB1 USB2 USB3 USB4 USB7 LANC ACPI: (supports S0 S3 S4 S5) Suspend2 2.2: No matching enabled writer found. Suspending disabled. Suspend2 2.2: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending. usb 3-1: new low speed USB device using uhci_hcd and address 2 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. usb 4-1: new full speed USB device using uhci_hcd and address 2 input: AT Translated Set 2 keyboard as /class/input/input1 input: PS/2 Mouse as /class/input/input2 input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 EXT3-fs: sda6: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 918210 ext3_orphan_cleanup: deleting unreferenced inode 917869 ext3_orphan_cleanup: deleting unreferenced inode 917867 ext3_orphan_cleanup: deleting unreferenced inode 917865 kjournald starting. Commit interval 5 seconds ext3_orphan_cleanup: deleting unreferenced inode 917598 ext3_orphan_cleanup: deleting unreferenced inode 917549 EXT3-fs: sda6: 6 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 196k freed input: PS/2 Mouse as /class/input/input4 input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org> PCI: Enabling device 0000:0a:03.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:0a:03.1[A] -> GSI 16 (level, low) -> IRQ 16 Bluetooth: HCI USB driver ver 2.9 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d2006000-d20067ff] Max Packet=[2048] input: HID 062a:0000 as /class/input/input6 input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.1-1 ieee80211_crypt: registered algorithm 'NULL' usbcore: registered new driver usbhid usbcore: registered new driver hci_usb drivers/usb/input/hid-core.c: v2.6:USB HID core driver ieee80211: 802.11 data/management/control stack, 1.1.12 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 0.0.70 ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:06:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301f9e8aa] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k EXT3 FS on sda6, internal journal NTFS volume version 3.1. NTFS-fs warning (device sda2): load_system_files(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows. NTFS-fs warning (device sda2): load_system_files(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk. Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized ipw3945: Detected geography ABG (13 802.11bg channels, 8 802.11a channels) ieee80211_crypt: registered algorithm 'WEP' Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.6 sony_acpi: method: name: GBRT, args 0 sony_acpi: method: name: SBRT, args 1 sony_acpi: method: name: GPBR, args 0 sony_acpi: method: name: SPBR, args 1 sony_acpi: method: name: PWAK, args 0 sony_acpi: method: name: GWDP, args 0 sony_acpi: method: name: GSNE, args 1 sony_acpi: method: name: SSNE, args 1 sony_acpi: method: name: CSXB, args 1 sony_acpi: method: name: SODV, args 1 sony_acpi: method: name: GDDI, args 0 sony_acpi: method: name: STCS, args 1 sony_acpi: method: name: RBMF, args 1 sony_acpi: method: name: RSBI, args 1 sony_acpi: method: name: CBMF, args 1 sony_acpi: method: name: SN00, args 1 sony_acpi: method: name: SN01, args 0 sony_acpi: method: name: SN02, args 1 sony_acpi: method: name: SN03, args 1 sony_acpi: method: name: SN04, args 0 sony_acpi: method: name: SN05, args 1 sony_acpi: method: name: SN06, args 1 sony_acpi: method: name: SNCM, args 0 sony_acpi: method: name: SN07, args 1 sony_acpi: method: name: SNF0, args 1 sony_acpi: method: name: SNF1, args 1 sony_acpi: method: name: SNF2, args 1 sony_acpi: method: name: SNF3, args 1 sony_acpi: method: name: SNF4, args 1 sony_acpi: method: name: SNFE, args 1 sony_acpi: method: name: SNFF, args 1 sony_acpi: method: name: SNAV, args 0 sony_acpi: method: name: SNGN, args 1 ACPI Sony Notebook Control Driver v0.2 successfully installed ################### DMIDECODE #################################### # dmidecode 2.6 SMBIOS 2.40 present. 20 structures occupying 1053 bytes. Table at 0x000DC010. Handle 0x0000 DMI type 0, 24 bytes. BIOS Information Vendor: Phoenix Technologies LTD Version: R0050J3 Release Date: 01/06/2006 Address: 0xE6DB0 Runtime Size: 102992 bytes ROM Size: 1024 kB Characteristics: PCI is supported PC Card (PCMCIA) is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported 8042 keyboard services are supported (int 9h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported Smart battery is supported BIOS boot specification is supported Function key-initiated network boot is supported Handle 0x0001 DMI type 1, 27 bytes. System Information Manufacturer: Sony Corporation Product Name: VGN-FE11S Version: C3LLYUFR Serial Number: 28240455-5000690 UUID: 0D86FF80-9403-11DA-8132-0013A90E28C4 Wake-up Type: Power Switch Handle 0x0002 DMI type 2, 12 bytes. Base Board Information Manufacturer: Sony Corporation Product Name: VAIO Version: N/A Serial Number: N/A Handle 0x0003 DMI type 3, 17 bytes. Chassis Information Manufacturer: Sony Corporation Type: Notebook Lock: Not Present Version: C3LLYUFR Serial Number: 28240455-5000690 Asset Tag: 7H2M0000000099454e2070702ada Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Handle 0x0004 DMI type 4, 35 bytes. Processor Information Socket Designation: N/A Type: Central Processor Family: Other Manufacturer: GenuineIntel ID: E8 06 00 00 FF FB E9 BF Version: Genuine Intel(R) CPU T2400 @ 1.83GHz Voltage: 1.3 V External Clock: 167 MHz Max Speed: 1833 MHz Current Speed: 1833 MHz Status: Populated, Enabled Upgrade: None L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: N/A Asset Tag: N/A Part Number: N/A Handle 0x0005 DMI type 7, 19 bytes. Cache Information Socket Designation: L1 Cache Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 64 KB Maximum Size: 64 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: None System Type: Other Associativity: 8-way Set-associative Handle 0x0006 DMI type 7, 19 bytes. Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: External Installed Size: 2048 KB Maximum Size: 2048 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Burst Speed: Unknown Error Correction Type: None System Type: Data Associativity: 8-way Set-associative Handle 0x0007 DMI type 7, 19 bytes. Cache Information Socket Designation: L3 Cache Configuration: Disabled, Not Socketed, Level 3 Operational Mode: Unknown Location: Unknown Installed Size: 0 KB Maximum Size: 0 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Burst Speed: Unknown Error Correction Type: None System Type: Data Associativity: 4-way Set-associative Handle 0x0008 DMI type 9, 13 bytes. System Slot Information Designation: PCCARD1 Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 0, Socket 1 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Modem ring resume is supported PME signal is supported Hot-plug devices are supported Handle 0x0009 DMI type 11, 5 bytes. OEM Strings String 1: JPBL-002031 String 2: FNC-EXTBCCIA0he9 String 3: 7H2M0000000099454e2070702ada String 4: Reserved String 5: Reserved Handle 0x000A DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 2048 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x000B DMI type 17, 21 bytes. Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 32 bits Data Width: 32 bits Size: 512 MB Form Factor: SODIMM Set: None Locator: SODIMM1 Bank Locator: Bank 0 Type: <OUT OF SPEC> Type Detail: Unknown Handle 0x000C DMI type 17, 21 bytes. Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 32 bits Data Width: 32 bits Size: 512 MB Form Factor: SODIMM Set: None Locator: SODIMM2 Bank Locator: Bank 1 Type: <OUT OF SPEC> Type Detail: Unknown Handle 0x000D DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Array Handle: 0x000A Partition Width: 0 Handle 0x000E DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x000B Memory Array Mapped Address Handle: 0x000D Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000F DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00020000000 Ending Address: 0x0003FFFFFFF Range Size: 512 MB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000D Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0010 DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x0011 DMI type 129, 16 bytes. OEM-specific Type Header and Data: 81 10 11 00 01 01 02 01 00 00 00 01 06 01 00 01 Strings: Intel_ASF_001 Intel_ASF_001 Handle 0x0012 DMI type 136, 8 bytes. OEM-specific Type Header and Data: 88 08 12 00 5A 5A 00 00 Strings: ... Handle 0x0013 DMI type 127, 4 bytes. End Of Table ############################## INTERRUPTS ################################## CPU0 CPU1 0: 1691804 1 IO-APIC-edge timer 1: 4162 0 IO-APIC-edge i8042 9: 1097 0 IO-APIC-level acpi 12: 231 0 IO-APIC-edge i8042 14: 14955 0 IO-APIC-edge ide0 16: 2 0 IO-APIC-level yenta, uhci_hcd:usb5, ohci1394 17: 99623 0 IO-APIC-level uhci_hcd:usb3 18: 523961 0 IO-APIC-level uhci_hcd:usb4, ipw3945 21: 15515 0 IO-APIC-level libata 22: 16 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 23: 262 0 IO-APIC-level HDA Intel NMI: 0 0 LOC: 1658893 1659447 ERR: 0 MIS: 0 ############################# LSPCI VV ######################################### 00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] #09 [5109] 00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Graphics Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d0000000-d1ffffff Prefetchable memory behind bridge: 00000000b0000000-00000000bff00000 BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [a0] #10 [0141] 00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Interrupt: pin A routed to IRQ 23 Region 0: Memory at d2300000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] #10 [0091] 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c8000000-c9ffffff Prefetchable memory behind bridge: 00000000c0000000-00000000c1f00000 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: ca000000-cbffffff Prefetchable memory behind bridge: 00000000c2000000-00000000c3f00000 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=06, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: cc000000-cdffffff Prefetchable memory behind bridge: 00000000c4000000-00000000c5f00000 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=08, subordinate=09, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: ce000000-cfffffff Prefetchable memory behind bridge: 00000000c6000000-00000000c7f00000 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 4: I/O ports at 1800 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 1820 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1840 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1860 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: Memory at d2304000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [20a0] 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=0a, subordinate=0b, sec-latency=32 I/O behind bridge: 00006000-00006fff Memory behind bridge: d2000000-d20fffff Prefetchable memory behind bridge: 0000000050000000-0000000051f00000 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] #09 [100c] 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at 1880 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 0: I/O ports at 18c8 [size=8] Region 1: I/O ports at 18ac [size=4] Region 2: I/O ports at 18c0 [size=8] Region 3: I/O ports at 18a8 [size=4] Region 4: I/O ports at 18b0 [size=16] Region 5: Memory at d2304400 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 18e0 [size=32] 01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 01d8 (rev a1) (prog-if 00 [VGA]) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Interrupt: pin A routed to IRQ 7 Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=16M] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] #10 [0001] 06:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02) Subsystem: Intel Corporation: Unknown device 1051 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Interrupt: pin A routed to IRQ 18 Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] #10 [0011] 0a:03.0 CardBus bridge: Texas Instruments: Unknown device 8039 Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d2007000 (32-bit, non-prefetchable) [size=4K] Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176 Memory window 0: 50000000-51fff000 (prefetchable) Memory window 1: 52000000-53fff000 I/O window 0: 00006400-000064ff I/O window 1: 00006800-000068ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0a:03.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 803a (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 1000ns max), cache line size 10 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d2006000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at d2000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 0a:03.2 Mass storage controller: Texas Instruments: Unknown device 803b Subsystem: Sony Corporation: Unknown device 81ef Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 3 Region 0: Memory at d2004000 (32-bit, non-prefetchable) [disabled] [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0a:08.0 Ethernet controller: Intel Corporation: Unknown device 1092 (rev 02) Subsystem: Sony Corporation: Unknown device 81ef Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 14000ns max), cache line size 10 Interrupt: pin A routed to IRQ 20 Region 0: Memory at d2005000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 6000 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Please post dmesg and lspci output with attachemnt. It will make things not too big :-). Please try generic hotkey patch filed at http://bugzilla.kernel.org/show_bug.cgi?id=5749 test brightness contrl by echo -n xx > /sys/hotkey/brightness
Acpi hotkey patch didn't work on vaio vgn-fe11s, sys/hotkey devices are correcly created : total 0 -rw-r--r-- 1 root root 0 2006-03-12 16:00 brightness -rw-r--r-- 1 root root 4096 2006-03-12 16:01 output_switch -rw-r--r-- 1 root root 4096 2006-03-12 16:01 output_zoom -rw-r--r-- 1 root root 0 2006-03-12 16:01 volume but no effect resuslts when changing values with echo commands.
Suspend on Disk and on Ram also doesn't work on this notebook. HOTKEYS: I also get no event on xev from pressing special keys
Please post acpidump output.
Please test latest vanilla kernel. --Luming
Created attachment 8285 [details] acpidump for Sony VAIO VGN-FE11M acpidump is from FE11M but it shouldn't really be different from the FE11S, the difference between them is just in the cpu power and hard disk size.
This laptop should work with a kernel >= 2.6.23-rc1
ok, forgot to mention you have to use sony-laptop instead of sonypi
Please reopen this bug if there's still a problem with kernel 2.6.23-rc.