Most recent kernel where this bug did not occur: None that I'm aware of. Distribution: Gentoo Base System version 1.6.13 Hardware Environment: IBM xSeries 225 Type 8647-52X LSI Login Corp. MPT IME BIOS MPTBIOS-IME-5.04.06 I Build lspci 0000:00:00.0 Host bridge: Intel Corporation E7505 Memory Controller Hub (rev 03) 0000:00:00.1 Class ff00: Intel Corporation E7505/E7205 Series RAS Controller (rev 03) 0000:00:01.0 PCI bridge: Intel Corporation E7505/E7205 PCI-to-AGP Bridge (rev 03) 0000:00:02.0 PCI bridge: Intel Corporation E7505 Hub Interface B PCI-to-PCI Bridge (rev 03) 0000:00:02.1 Class ff00: Intel Corporation E7505 Hub Interface B PCI-to-PCI Bridge RAS Controller (rev 03) 0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) 0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) 0000:00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) 0000:02:1c.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 04) 0000:02:1d.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge (rev 04) 0000:02:1e.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 04) 0000:02:1f.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge (rev 04) 0000:03:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02) 0000:04:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:04:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) 0000:04:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) 0000:05:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) Additional info for the controller: 0000:04:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) Subsystem: IBM: Unknown device 1000 Flags: bus master, 66Mhz, medium devsel, latency 72, IRQ 18 I/O ports at 9400 [size=256] Memory at f5010000 (64-bit, non-prefetchable) [size=64K] Memory at f5000000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at 50000000 [disabled] [size=1M] Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [68] 0000:04:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) Subsystem: IBM: Unknown device 1000 Flags: bus master, 66Mhz, medium devsel, latency 72, IRQ 19 I/O ports at 9800 [size=256] Memory at f5020000 (64-bit, non-prefetchable) [size=64K] Memory at f5030000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at 50100000 [disabled] [size=1M] Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [68] Software Environment: emerge --info Portage 2.0.51.22-r3 (default-linux/x86/2005.1, gcc-3.3.6, glibc-2.3.5-r2, 2.6.14.3 i686) ================================================================= System uname: 2.6.14.3 i686 Intel(R) Xeon(TM) CPU 2.80GHz Gentoo Base System version 1.6.13 dev-lang/python: 2.3.5, 2.4.2 sys-apps/sandbox: 1.2.12 sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1 sys-devel/binutils: 2.15.92.0.2-r10 sys-devel/libtool: 1.5.20 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-O2 -march=pentium4 -pipe -fomit-frame-pointer -mmmx -msse2 -mfpmath=sse" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/share/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" CXXFLAGS="-O2 -march=pentium4 -pipe -fomit-frame-pointer -mmmx -msse2 -mfpmath=sse" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks sandbox sfperms strict" GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/Linux/distributions/gentoo" MAKEOPTS="-j3" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 bitmap-fonts bzip2 crypt expat ldap mhash motif ncurses nls nptl nptlonly pam pcre pdflib perl python readline spell ssl tcpd truetype truetype-fonts type1-fonts udev xml2 zlib userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY Problem Description: With CONFIG_PREEMPT_VOLUNTARY set the system will boot normally, setting CONFIG_PREEMPT_NONE the system boots with lots of mptscsih: ioc0 messages. This behaviour seems indicative of an error or kernel bug to me. Steps to reproduce: Compile the kernel with the following options: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.14.3 # Wed Dec 7 16:37:43 2005 # CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_HPET_TIMER=y CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_SCHED_SMT=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set CONFIG_DCDBAS=m # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_IRQBALANCE=y # CONFIG_REGPARM is not set CONFIG_SECCOMP=y CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 CONFIG_PHYSICAL_START=0x100000 # CONFIG_KEXEC is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set # CONFIG_ACPI_CONTAINER is not set # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY_PROC is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y CONFIG_EISA=y # CONFIG_EISA_VLB_PRIMING is not set CONFIG_EISA_PCI_EISA=y CONFIG_EISA_VIRTUAL_ROOT=y CONFIG_EISA_NAMES=y # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_HOTPLUG_CPU is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_NOT_PC=y # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_ISAPNP=y # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=m CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y CONFIG_BLK_DEV_OPTI621=m CONFIG_BLK_DEV_RZ1000=m CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_AEC62XX=m CONFIG_BLK_DEV_ALI15X3=m # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=m CONFIG_BLK_DEV_ATIIXP=m CONFIG_BLK_DEV_CMD64X=m CONFIG_BLK_DEV_TRIFLEX=m CONFIG_BLK_DEV_CY82C693=m CONFIG_BLK_DEV_CS5520=m CONFIG_BLK_DEV_CS5530=m CONFIG_BLK_DEV_HPT34X=m # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=m CONFIG_BLK_DEV_SC1200=m CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_IT821X=m CONFIG_BLK_DEV_NS87415=m CONFIG_BLK_DEV_PDC202XX_OLD=m # CONFIG_PDC202XX_BURST is not set CONFIG_BLK_DEV_PDC202XX_NEW=m # CONFIG_PDC202XX_FORCE is not set CONFIG_BLK_DEV_SVWKS=m CONFIG_BLK_DEV_SIIMAGE=m CONFIG_BLK_DEV_SIS5513=m CONFIG_BLK_DEV_SLC90E66=m CONFIG_BLK_DEV_TRM290=m CONFIG_BLK_DEV_VIA82CXXX=m # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_7000FASST=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AHA152X=m CONFIG_SCSI_AHA1542=m CONFIG_SCSI_AHA1740=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_PROBE_EISA_VL is not set CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_ENABLE_RD_STRM is not set CONFIG_AIC79XX_DEBUG_ENABLE=y CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_IN2000=m # CONFIG_MEGARAID_NEWGEN is not set CONFIG_MEGARAID_LEGACY=m # CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=m CONFIG_SCSI_SATA_AHCI=m CONFIG_SCSI_SATA_SVW=m CONFIG_SCSI_ATA_PIIX=m # CONFIG_SCSI_SATA_MV is not set CONFIG_SCSI_SATA_NV=m CONFIG_SCSI_SATA_PROMISE=m CONFIG_SCSI_SATA_QSTOR=m CONFIG_SCSI_SATA_SX4=m CONFIG_SCSI_SATA_SIL=m CONFIG_SCSI_SATA_SIS=m CONFIG_SCSI_SATA_ULI=m CONFIG_SCSI_SATA_VIA=m CONFIG_SCSI_SATA_VITESSE=m CONFIG_SCSI_SATA_INTEL_COMBINED=y CONFIG_SCSI_BUSLOGIC=m # CONFIG_SCSI_OMIT_FLASHPOINT is not set CONFIG_SCSI_DMX3191D=m CONFIG_SCSI_DTC3280=m CONFIG_SCSI_EATA=m # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_GENERIC_NCR5380=m CONFIG_SCSI_GENERIC_NCR5380_MMIO=m # CONFIG_SCSI_GENERIC_NCR53C400 is not set CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m CONFIG_SCSI_INIA100=m CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_NCR53C406A=m CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set CONFIG_SCSI_IPR=m # CONFIG_SCSI_IPR_TRACE is not set # CONFIG_SCSI_IPR_DUMP is not set CONFIG_SCSI_PAS16=m CONFIG_SCSI_PSI240I=m CONFIG_SCSI_QLOGIC_FAS=m CONFIG_SCSI_QLOGIC_FC=m # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=m # CONFIG_SCSI_QLOGIC_1280_1040 is not set CONFIG_SCSI_QLA2XXX=y CONFIG_SCSI_QLA21XX=m CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m CONFIG_SCSI_QLA24XX=m CONFIG_SCSI_LPFC=m CONFIG_SCSI_SIM710=m CONFIG_53C700_IO_MAPPED=y CONFIG_SCSI_SYM53C416=m CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=m CONFIG_SCSI_T128=m CONFIG_SCSI_U14_34F=m # CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set CONFIG_SCSI_U14_34F_MAX_TAGS=8 CONFIG_SCSI_ULTRASTOR=m CONFIG_SCSI_NSP32=m # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID5=m CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support # CONFIG_FUSION=y CONFIG_FUSION_SPI=y # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=16 CONFIG_FUSION_CTL=y # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_EL1=m CONFIG_EL2=m CONFIG_ELPLUS=m CONFIG_EL16=m CONFIG_EL3=m CONFIG_3C515=m CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_LANCE=m CONFIG_NET_VENDOR_SMC=y CONFIG_WD80x3=m CONFIG_ULTRA=m CONFIG_ULTRA32=m CONFIG_SMC9194=m CONFIG_NET_VENDOR_RACAL=y CONFIG_NI52=m CONFIG_NI65=m # # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_NAPI is not set CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m # CONFIG_ULI526X is not set CONFIG_AT1700=m CONFIG_DEPCA=m CONFIG_HP100=m # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m # CONFIG_AMD8111E_NAPI is not set CONFIG_ADAPTEC_STARFIRE=m # CONFIG_ADAPTEC_STARFIRE_NAPI is not set CONFIG_AC3200=m CONFIG_APRICOT=m CONFIG_B44=m CONFIG_FORCEDETH=m CONFIG_CS89x0=m CONFIG_DGRS=m CONFIG_EEPRO100=m CONFIG_E100=m CONFIG_LNE390=m CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_NE3210=m CONFIG_ES3210=m # CONFIG_8139CP is not set CONFIG_8139TOO=m CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=m CONFIG_EPIC100=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=m CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m # CONFIG_E1000_NAPI is not set CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m # CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set CONFIG_SKGE=m CONFIG_SK98LIN=m CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=y CONFIG_BNX2=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set # CONFIG_2BUFF_MODE is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # CONFIG_AGP=m CONFIG_AGP_ALI=m CONFIG_AGP_ATI=m CONFIG_AGP_AMD=m CONFIG_AGP_AMD64=m CONFIG_AGP_INTEL=m CONFIG_AGP_NVIDIA=m CONFIG_AGP_SIS=m CONFIG_AGP_SWORKS=m CONFIG_AGP_VIA=m CONFIG_AGP_EFFICEON=m CONFIG_DRM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_I915=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m # CONFIG_DRM_SAVAGE is not set CONFIG_MWAVE=m CONFIG_RAW_DRIVER=m # CONFIG_HPET is not set CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # # I2C support # CONFIG_I2C=y # CONFIG_I2C_CHARDEV is not set # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # CONFIG_IBM_ASM=m # # Multimedia Capabilities Port drivers # # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # # # Video Adapters # # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # # Radio Adapters # # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_SF16FMR2 is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_CIRRUS=m CONFIG_FB_PM2=m # CONFIG_FB_PM2_FIFO_DISCONNECT is not set CONFIG_FB_CYBER2000=m CONFIG_FB_ARC=m # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y CONFIG_FB_HGA=m # CONFIG_FB_HGA_ACCEL is not set CONFIG_FB_NVIDIA=m # CONFIG_FB_NVIDIA_I2C is not set CONFIG_FB_RIVA=m # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_I810=m # CONFIG_FB_I810_GTF is not set CONFIG_FB_INTEL=m # CONFIG_FB_INTEL_DEBUG is not set CONFIG_FB_MATROX=m # CONFIG_FB_MATROX_MILLENIUM is not set # CONFIG_FB_MATROX_MYSTIQUE is not set # CONFIG_FB_MATROX_G is not set # CONFIG_FB_MATROX_I2C is not set # CONFIG_FB_MATROX_MULTIHEAD is not set CONFIG_FB_RADEON_OLD=m CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=m CONFIG_FB_ATY=m CONFIG_FB_ATY_CT=y CONFIG_FB_ATY_GENERIC_LCD=y CONFIG_FB_ATY_XL_INIT=y CONFIG_FB_ATY_GX=y CONFIG_FB_SAVAGE=m # CONFIG_FB_SAVAGE_I2C is not set # CONFIG_FB_SAVAGE_ACCEL is not set CONFIG_FB_SIS=m # CONFIG_FB_SIS_300 is not set # CONFIG_FB_SIS_315 is not set CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m # CONFIG_FB_3DFX_ACCEL is not set CONFIG_FB_VOODOO1=m # CONFIG_FB_CYBLA is not set CONFIG_FB_TRIDENT=m # CONFIG_FB_TRIDENT_ACCEL is not set # CONFIG_FB_GEODE is not set CONFIG_FB_S1D13XXX=m # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # # Logo configuration # CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set CONFIG_LOGO_LINUX_VGA16=y # CONFIG_LOGO_LINUX_CLUT224 is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_OPL4_LIB=m CONFIG_SND_VX_LIB=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m # # ISA devices # CONFIG_SND_AD1848_LIB=m CONFIG_SND_CS4231_LIB=m # CONFIG_SND_AD1816A is not set CONFIG_SND_AD1848=m CONFIG_SND_CS4231=m CONFIG_SND_CS4232=m CONFIG_SND_CS4236=m # CONFIG_SND_ES968 is not set CONFIG_SND_ES1688=m CONFIG_SND_ES18XX=m CONFIG_SND_GUS_SYNTH=m CONFIG_SND_GUSCLASSIC=m CONFIG_SND_GUSEXTREME=m CONFIG_SND_GUSMAX=m CONFIG_SND_INTERWAVE=m CONFIG_SND_INTERWAVE_STB=m CONFIG_SND_OPTI92X_AD1848=m CONFIG_SND_OPTI92X_CS4231=m CONFIG_SND_OPTI93X=m CONFIG_SND_SB8=m CONFIG_SND_SB16=m CONFIG_SND_SBAWE=m # CONFIG_SND_SB16_CSP is not set CONFIG_SND_WAVEFRONT=m CONFIG_SND_ALS100=m CONFIG_SND_AZT2320=m CONFIG_SND_CMI8330=m CONFIG_SND_DT019X=m CONFIG_SND_OPL3SA2=m CONFIG_SND_SGALAXY=m CONFIG_SND_SSCAPE=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_AC97_BUS=m # # PCI devices # CONFIG_SND_ALI5451=m CONFIG_SND_ATIIXP=m CONFIG_SND_ATIIXP_MODEM=m CONFIG_SND_AU8810=m CONFIG_SND_AU8820=m CONFIG_SND_AU8830=m CONFIG_SND_AZT3328=m CONFIG_SND_BT87X=m # CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CS46XX=m # CONFIG_SND_CS46XX_NEW_DSP is not set CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m CONFIG_SND_EMU10K1X=m CONFIG_SND_CA0106=m CONFIG_SND_KORG1212=m CONFIG_SND_MIXART=m CONFIG_SND_NM256=m CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m CONFIG_SND_HDSP=m CONFIG_SND_HDSPM=m CONFIG_SND_TRIDENT=m CONFIG_SND_YMFPCI=m CONFIG_SND_AD1889=m CONFIG_SND_ALS4000=m CONFIG_SND_CMIPCI=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m CONFIG_SND_MAESTRO3=m CONFIG_SND_FM801=m CONFIG_SND_FM801_TEA575X=m CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_SONICVIBES=m CONFIG_SND_VIA82XX=m CONFIG_SND_VIA82XX_MODEM=m CONFIG_SND_VX222=m CONFIG_SND_HDA_INTEL=m # # USB devices # # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set CONFIG_USB_AIPTEK=m CONFIG_USB_WACOM=m CONFIG_USB_ACECAD=m CONFIG_USB_KBTAB=m CONFIG_USB_POWERMATE=m CONFIG_USB_MTOUCH=m CONFIG_USB_ITMTOUCH=m CONFIG_USB_EGALAX=m CONFIG_USB_YEALINK=m CONFIG_USB_XPAD=m CONFIG_USB_ATI_REMOTE=m CONFIG_USB_KEYSPAN_REMOTE=m CONFIG_USB_APPLETOUCH=m # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # # USB Multimedia devices # CONFIG_USB_DABUSB=m CONFIG_USB_VICAM=m CONFIG_USB_DSBR=m CONFIG_USB_IBMCAM=m CONFIG_USB_KONICAWC=m CONFIG_USB_OV511=m CONFIG_USB_SE401=m CONFIG_USB_SN9C102=m CONFIG_USB_STV680=m CONFIG_USB_PWC=m # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_AUERSWALD=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_LED=m CONFIG_USB_CYTHERM=m CONFIG_USB_PHIDGETKIT=m CONFIG_USB_PHIDGETSERVO=m CONFIG_USB_IDMOUSE=m CONFIG_USB_SISUSBVGA=m # CONFIG_USB_SISUSBVGA_CON is not set CONFIG_USB_LD=m CONFIG_USB_TEST=m # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # InfiniBand support # # CONFIG_INFINIBAND is not set # # SN Devices # # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m CONFIG_NTFS_DEBUG=y CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 CONFIG_DEBUG_BUGVERBOSE=y CONFIG_EARLY_PRINTK=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES_586 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # CONFIG_CRYPTO_DEV_PADLOCK is not set # # Library routines # CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_PC=y Then boot (kernel /kernel-2.6.14.3 root=/dev/sda3) boot up messages: ... Using IPI Shortcut mode input: PS/2 Generic Mouse on isa0060/serio1 mptscsih: ioc0: attempting task abort! (sc=f7d3a080) scsi0 : destination target 0, lun 0 command: cdb[0]=0x28: 28 00 00 3c 8c 47 00 00 01 00 mptscsih: ioc0: task abort: SUCCESS (sc=f7d3a080) mptscsih: ioc0: attempting task abort! (sc=f7d3a080) scsi0 : destination target 0, lun 0 command: cdb[0]=0x0: 00 00 00 00 00 00 mptscsih: ioc0: task abort: SUCCESS (sc=f7d3a080) mptscsih: ioc0: attempting target reset! (sc=f7d3a080) scsi0 : destination target 0, lun 0 command: cdb[0]=0x28: 28 00 00 3c 8c 47 00 00 01 00 mptbase: ioc0: IOCStatus(0x0048): SCSI Task Terminated mptbase: ioc0: IOCStatus(0x0048): SCSI Task Terminated mptscsih: ioc0: target reset: SUCCESS (sc=f7d3a080) mptscsih: ioc0: attempting task abort! (sc=f7d3a080) scsi0 : destination target 0, lun 0 command: cdb[0]=0x0: 00 00 00 00 00 00 mptscsih: ioc0: task abort: SUCCESS (sc=f7d3a080) mptscsih: ioc0: attempting bus reset! (sc=f7d3a080) scsi0 : destination target 0, lun 0 command: cdb[0]=0x28: 28 00 00 3c 8c 47 00 00 01 00 mptbase: ioc0: IOCStatus(0x0048): SCSI Task Terminated mptscsih: ioc0: bus reset: SUCCESS (sc=f7d3a080) mptscsih: ioc0: attempting task abort! (sc=f7d3a080) scsi0 : destination target 0, lun 0 command: cdb[0]=0x0: 00 00 00 00 00 00 mptscsih: ioc0: task abort: SUCCESS (sc=f7d3a080) mptscsih: ioc0: Attempting host reset! (sc=f7d3a080) mptbase: Initiating ioc0 recovery ReiserFS: sda3: found reiserfs format "3.6" with standard journal ... re-compile the kernel same options but change to CONFIG_PREEMPT_VOLUNTARY=y Reboot and no messages appear at boot time: ... Using IPI Shortcut mode input: PS/2 Generic Mouse on isa0060/serio1 ReiserFS: sda3: found reiserfs format "3.6" with standard journal ... Regards, Warren.
Begin forwarded message: Date: Thu, 8 Dec 2005 05:57:42 -0800 From: bugme-daemon@bugzilla.kernel.org To: bugme-new@lists.osdl.org Subject: [Bugme-new] [Bug 5712] New: mptscsih: ioc0: task abort messages at boot. http://bugzilla.kernel.org/show_bug.cgi?id=5712 Summary: mptscsih: ioc0: task abort messages at boot. Kernel Version: 2.6.14.3
Is it possible to send me the entire dmesg boot log. Thanks, Eric Moore
I have same kind of problem: [3715614.463289] mptbase: ioc1: IOCStatus(0x0003): Invalid SGL [3715614.463304] mptbase: ioc1: LogInfo(0x11070000): F/W: DMA Error [3715614.725935] mptbase: ioc1: LogInfo(0x11070000): F/W: DMA Error [3715614.725941] mptbase: ioc1: IOCStatus(0x004b): SCSI IOC Terminated [3715614.725955] mptbase: ioc1: LogInfo(0x11070000): F/W: DMA Error [3715614.725959] mptbase: ioc1: IOCStatus(0x004b): SCSI IOC Terminated [3715614.725969] mptbase: ioc1: LogInfo(0x11070000): F/W: DMA Error [3715614.725973] mptbase: ioc1: IOCStatus(0x004b): SCSI IOC Terminated [3715614.725983] mptbase: ioc1: LogInfo(0x11070000): F/W: DMA Error ... I got these errors when I copied ("cp -a") large (==2500 subdirecories, 12520 files) directory to disk-array (raid6) which is behind 2-channel LSI21320. LSI21320 isn't primary HBA so it has no effect to boot stage. ---------------------- #uname -a Linux unknown 2.6.13-rc5-noide-mpt #1 SMP Fri Aug 5 18:03:54 EEST 2005 ppc64 POWER5 (gr) CHRP IBM,9123-710 GNU/Linux #btw. (kernel is pristine 2.6.13-rc5)
Created attachment 7080 [details] jd: additional info
Created attachment 7081 [details] jd: additional info(2) btw. target filesystem is normal ext2: #mount ... /dev/md/2 on /ahost/archive type ext2 (rw,noatime)
Created attachment 7082 [details] jd: additional info(3) /proc/config.gz
Humm, your having ppc. There have been several endian fix's since the 3.03.02 driver (which is the driver version in the 2.6.13-rc5 kernel). Wondering if you've the latest kernel yet; e.g. 2.6.15? Eric Moore
You're rigth; I didn't notice version change until yesterday, so I definitely have to try newer kernel first...
Dear Eric, I've tried to reproduce this bug using the 2.6.15.1 kernel and I can't. The system is booting normally with the same kernel options that were producing errors with the 2.6.14.3 kernel. Except for some problems with framebuffer (my framebuffer choices from 2.6.14.3 are not producing the desired results with 2.6.15.1), the system is booting and working smoothly with the 2.6.15.1 kernel. Please let me know if you would like me to provide anymore informations. Regards, Warren.
Most likely the endianess issue was the problem. If you diff the 3.02.02 with 3.02.05 driver, then grep the diff looking for cpu, you will find alot of cpu's. Perhaps you could take the 3.02.05 driver and compile/test it in the older kernel. I suggest that you disable the CONFIG_FUSION_SAS driver, as I doubt it would compile. ERic Moore
Created attachment 7121 [details] jd: additional info; 2.6.16-rc1/fusionmpt ver. 3.03.06 Still whining same; although only "once" and it appeared only about 0.3 seconds.
Still whining with 2.6.16-rc1/fusionmpt ver. 3.03.06. It is now about 100% sure that some messages will come if machine is acting as NFS-server and big enough file (about >=2GB?) is dumped over NFS to disk (raid6 group). Machine has 4GB physical mem.
It seems to be so that machine's load must be atleast >= 3...4 before error messages appear; it doesn't matter whether write target is raid0/raid6/whatnot. Also write speed to disk has no effect; if load is high enough (caused by nfsd for example) then errors will appear even if write speed is <= 10MB/s ... Single file dump (/dev/zero -> tst.dmp file)speed is now about >= 400MB/s to raid0-group (4 disks) and about 110MB/s to raid6-group (10 disks) when there is no other load than dd/cat "dumper".
Created attachment 7428 [details] jd: kernel/mpt-driver hangs (2.6.16-rc1/fusionmpt ver. 3.03.06) 2.6.16-rc1 hangs now under "medium load" 3-4 (see attachment) If I use one of machines internal disks, which are behind machine build-in adapter, then everything works ok, even though load is some where between 7-10. System seems to be more stable when I use only one disk which is behind LSI22320. When using only one disk then there is about 100-400 interrupts per second (50-200 /channel/s), but with raid6/6xdisks there is about 2500-3500 irq/s before it hangs. If I use separate disks for every (4x)NFS-client then system seems to be quite stable too; with 4 disks there is 100-400 irq/s also So there seems to be some correlation with irq/s value; if value is >=2000 then it is almost certain that kernel will hang eventually
Any updates on this problem? Thanks.
Since the problem appears to be resolved, closing the bug.