Distribution: Slackware Hardware Environment: # lspci -vvv 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=32M] Capabilities: [e4] #09 [1105] 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) (prog-if 00 [VGA]) Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ea100000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 169 Region 4: I/O ports at d400 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation: Unknown device 24c2 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 193 Region 4: I/O ports at d000 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 9 Region 0: Memory at ea180000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ea000000-ea0fffff Prefetchable memory behind bridge: 1f800000-1f8fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation: Unknown device 24c2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 185 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at f000 [size=16] Region 5: Memory at 1f900000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) Subsystem: Intel Corporation: Unknown device 24c2 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 3 Region 4: I/O ports at 0500 [size=32] 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) Subsystem: Albatron Corp.: Unknown device 2402 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 3 Region 0: I/O ports at dc00 [size=256] Region 1: I/O ports at e000 [size=64] Region 2: Memory at ea181000 (32-bit, non-prefetchable) [size=512] Region 3: Memory at ea182000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 Ethernet controller: 3Com Corporation 3CSOHO100B-TX 910-A01 [tulip] (rev 31) Subsystem: 3Com Corporation: Unknown device 1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (16000ns min, 32000ns max), cache line size 08 Interrupt: pin A routed to IRQ 177 Region 0: I/O ports at c000 [size=256] Region 1: Memory at ea024000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 1f800000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:04.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 10) Subsystem: 3Com Corporation 3C941 Gigabit LOM Ethernet Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (5750ns min, 7750ns max), cache line size 08 Interrupt: pin A routed to IRQ 169 Region 0: Memory at ea020000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at c400 [size=256] Expansion ROM at 1f820000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 1 model name : Intel(R) Celeron(R) CPU 1.70GHz stepping : 3 cpu MHz : 1697.545 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3398.33 # cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0400-047f : 0000:00:1f.0 0400-0403 : PM1a_EVT_BLK 0404-0405 : PM1a_CNT_BLK 0408-040b : PM_TMR 0428-042f : GPE0_BLK 0480-04bf : 0000:00:1f.0 0500-051f : 0000:00:1f.3 0cf8-0cff : PCI conf1 c000-cfff : PCI Bus #01 c000-c0ff : 0000:01:00.0 c000-c0ff : tulip c400-c4ff : 0000:01:04.0 c400-c4ff : skge d000-d01f : 0000:00:1d.1 d000-d01f : uhci_hcd d400-d41f : 0000:00:1d.0 d400-d41f : uhci_hcd dc00-dcff : 0000:00:1f.5 e000-e03f : 0000:00:1f.5 f000-f00f : 0000:00:1f.1 f000-f007 : ide0 f008-f00f : ide1 # cat /proc/iomem 00000000-0009fbff : System RAM 00000000-00000000 : Crash kernel 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000d0000-000d1fff : Adapter ROM 000d2000-000d27ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-1f7effff : System RAM 00100000-0044f079 : Kernel code 0044f07a-00597da7 : Kernel data 1f7f0000-1f7f2fff : ACPI Non-volatile Storage 1f7f3000-1f7fffff : ACPI Tables 1f800000-1f8fffff : PCI Bus #01 1f800000-1f81ffff : 0000:01:00.0 1f820000-1f83ffff : 0000:01:04.0 1f900000-1f9003ff : 0000:00:1f.1 e0000000-e7ffffff : 0000:00:02.0 e8000000-e9ffffff : 0000:00:00.0 ea000000-ea0fffff : PCI Bus #01 ea020000-ea023fff : 0000:01:04.0 ea020000-ea023fff : skge ea024000-ea0243ff : 0000:01:00.0 ea024000-ea0243ff : tulip ea100000-ea17ffff : 0000:00:02.0 ea180000-ea1803ff : 0000:00:1d.7 ea181000-ea1811ff : 0000:00:1f.5 ea182000-ea1820ff : 0000:00:1f.5 fec00000-ffffffff : reserved Software Environment: Linux space 2.6.13.1 #1 SMP Sat Sep 17 13:53:24 CEST 2005 i686 unknown unknown GNU/Linux Gnu C 3.3.6 Gnu make 3.80 binutils 2.15.92.0.2 util-linux 2.12p mount 2.12p module-init-tools 3.1 e2fsprogs 1.38 reiserfsprogs line reiser4progs line quota-tools 3.12. Linux C Library 2.3.5 Dynamic linker (ldd) 2.3.5 Linux C++ Library 5.0.7 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 Modules Loaded bonding Problem Description: Kernel logs BUG and hangs or oopses. Two logs: BUG & Oops, from two different kernel boots. ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:1014! invalid operand: 0000 [#1] PREEMPT SMP Modules linked in: bonding CPU: 0 EIP: 0060:[<c0150594>] Not tainted VLI EFLAGS: 00010256 (2.6.13.1) EIP is at __free_pages+0x44/0x50 eax: 00000000 ebx: df752000 ecx: c139e500 edx: 00000003 esi: 00000000 edi: c1555620 ebp: 00000000 esp: da2bfdac ds: 007b es: 007b ss: 0068 Process ifenslave (pid: 765, threadinfo=da2be000 task=da211a60) Stack: df752000 00000000 c0308678 df752044 00005000 dcf28000 1cf28000 00000001 c1555400 da2bfe44 c1555620 c0309f34 c1555400 00000046 00000000 da2bfe44 c1555400 da2bfe4c da2bfe46 c03998b0 c1555400 da2bfe44 c0124ad7 dcd3de00 Call Trace: [<c0308678>] skge_down+0x188/0x1e0 [<c0309f34>] skge_set_mac_address+0x74/0x100 [<c03998b0>] dev_set_mac_address+0x40/0x80 [<c0124ad7>] printk+0x17/0x20 [<e01c1560>] bond_enslave+0x180/0x860 [bonding] [<c0129e17>] local_bh_enable+0x37/0xb0 [<c0411265>] fib6_walk+0x85/0x90 [<e01c44be>] bond_do_ioctl+0x10e/0x310 [bonding] [<c044e01e>] _read_lock+0xe/0xa0 [<c044e36d>] _read_unlock+0xd/0x30 [<c044a38a>] vlan_device_event+0x1a/0x1c0 [<e01c43b0>] bond_do_ioctl+0x0/0x310 [bonding] [<c0399c24>] dev_ifsioc+0x334/0x3a0 [<c0399e87>] dev_ioctl+0x1f7/0x270 [<c03d7edc>] inet_ioctl+0x9c/0xb0 [<c038eb59>] sock_ioctl+0xc9/0x1e0 [<c017f53e>] do_ioctl+0x8e/0xa0 [<c017f735>] vfs_ioctl+0x65/0x1f0 [<c017f905>] sys_ioctl+0x45/0x70 [<c010345b>] sysenter_past_esp+0x54/0x75 Code: c0 84 c0 74 22 85 d2 75 0a 89 c8 83 c4 08 e9 a4 f7 ff ff 89 54 24 04 89 0c 24 e8 88 f1 ff ff 90 8d b4 26 00 00 00 00 83 c4 08 c3 <0f> 0b f6 03 40 f4 47 c0 eb c4 89 f6 85 c0 74 2c 05 00 00 00 40 bonding: Warning : no link monitoring support for eth0 skge eth0: disabling interface Unable to handle kernel NULL pointer dereference at virtual address 00000004 printing eip: c03060a0 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: bonding CPU: 0 EIP: 0060:[<c03060a0>] Not tainted VLI EFLAGS: 00010282 (2.6.13.1) EIP is at skge_rx_clean+0x10/0x60 eax: 00000000 ebx: 00000000 ecx: 00000001 edx: 00000001 esi: c155564c edi: c1555620 ebp: 00000000 esp: d9f4bda8 ds: 007b es: 007b ss: 0068 Process ifenslave (pid: 680, threadinfo=d9f4a000 task=d9f63a60) Stack: 00000000 c158bd80 00000000 c030862f c1555620 00000000 df43d600 da2f6bf8 00000001 c1555400 d9f4be44 c1555620 c0309f34 c1555400 00000046 00000000 d9f4be44 c1555400 d9f4be4c d9f4be46 c03998b0 c1555400 d9f4be44 c0124ad7 Call Trace: [<c030862f>] skge_down+0x13f/0x1e0 [<c0309f34>] skge_set_mac_address+0x74/0x100 [<c03998b0>] dev_set_mac_address+0x40/0x80 [<c0124ad7>] printk+0x17/0x20 [<e01bf560>] bond_enslave+0x180/0x860 [bonding] [<c011fa37>] __wake_up_locked+0x27/0x30 [<c044e39f>] _spin_unlock_irqrestore+0xf/0x30 [<c010244a>] __down_trylock+0x3a/0x60 [<e01c24be>] bond_do_ioctl+0x10e/0x310 [bonding] [<c044e39f>] _spin_unlock_irqrestore+0xf/0x30 [<c010244a>] __down_trylock+0x3a/0x60 [<c03d51c3>] inet_insert_ifa+0x113/0x150 [<e01c23b0>] bond_do_ioctl+0x0/0x310 [bonding] [<c0399c24>] dev_ifsioc+0x334/0x3a0 [<c0399e87>] dev_ioctl+0x1f7/0x270 [<c03d7edc>] inet_ioctl+0x9c/0xb0 [<c038eb59>] sock_ioctl+0xc9/0x1e0 [<c017f53e>] do_ioctl+0x8e/0xa0 [<c017f735>] vfs_ioctl+0x65/0x1f0 [<c017f905>] sys_ioctl+0x45/0x70 [<c010345b>] sysenter_past_esp+0x54/0x75 Code: 44 24 08 8b 52 04 66 c7 42 18 00 00 66 c7 42 1c 0e 00 0d 00 00 56 c8 89 02 c3 90 56 53 83 ec 04 8b 74 24 10 83 c6 2c 8b 5e 08 90 <8b> 43 04 c7 00 00 00 00 00 8b 53 08 85 d2 74 1e 8b 82 90 00 00 Steps to reproduce: Call "ifenslave bond0 eth0", where eth0 is Yukon rev 1, driven by skge.
Who maintains sk98lin/skge? Begin forwarded message: Date: Sat, 17 Sep 2005 06:57:25 -0700 From: bugme-daemon@kernel-bugs.osdl.org To: bugme-new@lists.osdl.org Subject: [Bugme-new] [Bug 5271] New: kernel BUG at mm/page_alloc.c:1014! (skge & bonding releated) http://bugzilla.kernel.org/show_bug.cgi?id=5271 Summary: kernel BUG at mm/page_alloc.c:1014! (skge & bonding releated) Kernel Version: 2.6.13.1 Status: NEW Severity: blocking Owner: acme@conectiva.com.br Submitter: olel@ans.pl Distribution: Slackware Hardware Environment: # lspci -vvv 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=32M] Capabilities: [e4] #09 [1105] 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) (prog-if 00 [VGA]) Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ea100000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 169 Region 4: I/O ports at d400 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation: Unknown device 24c2 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 193 Region 4: I/O ports at d000 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 9 Region 0: Memory at ea180000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ea000000-ea0fffff Prefetchable memory behind bridge: 1f800000-1f8fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation: Unknown device 24c2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 185 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at f000 [size=16] Region 5: Memory at 1f900000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) Subsystem: Intel Corporation: Unknown device 24c2 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 3 Region 4: I/O ports at 0500 [size=32] 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) Subsystem: Albatron Corp.: Unknown device 2402 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 3 Region 0: I/O ports at dc00 [size=256] Region 1: I/O ports at e000 [size=64] Region 2: Memory at ea181000 (32-bit, non-prefetchable) [size=512] Region 3: Memory at ea182000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 Ethernet controller: 3Com Corporation 3CSOHO100B-TX 910-A01 [tulip] (rev 31) Subsystem: 3Com Corporation: Unknown device 1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (16000ns min, 32000ns max), cache line size 08 Interrupt: pin A routed to IRQ 177 Region 0: I/O ports at c000 [size=256] Region 1: Memory at ea024000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 1f800000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:04.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 10) Subsystem: 3Com Corporation 3C941 Gigabit LOM Ethernet Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (5750ns min, 7750ns max), cache line size 08 Interrupt: pin A routed to IRQ 169 Region 0: Memory at ea020000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at c400 [size=256] Expansion ROM at 1f820000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 1 model name : Intel(R) Celeron(R) CPU 1.70GHz stepping : 3 cpu MHz : 1697.545 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3398.33 # cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0400-047f : 0000:00:1f.0 0400-0403 : PM1a_EVT_BLK 0404-0405 : PM1a_CNT_BLK 0408-040b : PM_TMR 0428-042f : GPE0_BLK 0480-04bf : 0000:00:1f.0 0500-051f : 0000:00:1f.3 0cf8-0cff : PCI conf1 c000-cfff : PCI Bus #01 c000-c0ff : 0000:01:00.0 c000-c0ff : tulip c400-c4ff : 0000:01:04.0 c400-c4ff : skge d000-d01f : 0000:00:1d.1 d000-d01f : uhci_hcd d400-d41f : 0000:00:1d.0 d400-d41f : uhci_hcd dc00-dcff : 0000:00:1f.5 e000-e03f : 0000:00:1f.5 f000-f00f : 0000:00:1f.1 f000-f007 : ide0 f008-f00f : ide1 # cat /proc/iomem 00000000-0009fbff : System RAM 00000000-00000000 : Crash kernel 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000d0000-000d1fff : Adapter ROM 000d2000-000d27ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-1f7effff : System RAM 00100000-0044f079 : Kernel code 0044f07a-00597da7 : Kernel data 1f7f0000-1f7f2fff : ACPI Non-volatile Storage 1f7f3000-1f7fffff : ACPI Tables 1f800000-1f8fffff : PCI Bus #01 1f800000-1f81ffff : 0000:01:00.0 1f820000-1f83ffff : 0000:01:04.0 1f900000-1f9003ff : 0000:00:1f.1 e0000000-e7ffffff : 0000:00:02.0 e8000000-e9ffffff : 0000:00:00.0 ea000000-ea0fffff : PCI Bus #01 ea020000-ea023fff : 0000:01:04.0 ea020000-ea023fff : skge ea024000-ea0243ff : 0000:01:00.0 ea024000-ea0243ff : tulip ea100000-ea17ffff : 0000:00:02.0 ea180000-ea1803ff : 0000:00:1d.7 ea181000-ea1811ff : 0000:00:1f.5 ea182000-ea1820ff : 0000:00:1f.5 fec00000-ffffffff : reserved Software Environment: Linux space 2.6.13.1 #1 SMP Sat Sep 17 13:53:24 CEST 2005 i686 unknown unknown GNU/Linux Gnu C 3.3.6 Gnu make 3.80 binutils 2.15.92.0.2 util-linux 2.12p mount 2.12p module-init-tools 3.1 e2fsprogs 1.38 reiserfsprogs line reiser4progs line quota-tools 3.12. Linux C Library 2.3.5 Dynamic linker (ldd) 2.3.5 Linux C++ Library 5.0.7 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 Modules Loaded bonding Problem Description: Kernel logs BUG and hangs or oopses. Two logs: BUG & Oops, from two different kernel boots. ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:1014! invalid operand: 0000 [#1] PREEMPT SMP Modules linked in: bonding CPU: 0 EIP: 0060:[<c0150594>] Not tainted VLI EFLAGS: 00010256 (2.6.13.1) EIP is at __free_pages+0x44/0x50 eax: 00000000 ebx: df752000 ecx: c139e500 edx: 00000003 esi: 00000000 edi: c1555620 ebp: 00000000 esp: da2bfdac ds: 007b es: 007b ss: 0068 Process ifenslave (pid: 765, threadinfo=da2be000 task=da211a60) Stack: df752000 00000000 c0308678 df752044 00005000 dcf28000 1cf28000 00000001 c1555400 da2bfe44 c1555620 c0309f34 c1555400 00000046 00000000 da2bfe44 c1555400 da2bfe4c da2bfe46 c03998b0 c1555400 da2bfe44 c0124ad7 dcd3de00 Call Trace: [<c0308678>] skge_down+0x188/0x1e0 [<c0309f34>] skge_set_mac_address+0x74/0x100 [<c03998b0>] dev_set_mac_address+0x40/0x80 [<c0124ad7>] printk+0x17/0x20 [<e01c1560>] bond_enslave+0x180/0x860 [bonding] [<c0129e17>] local_bh_enable+0x37/0xb0 [<c0411265>] fib6_walk+0x85/0x90 [<e01c44be>] bond_do_ioctl+0x10e/0x310 [bonding] [<c044e01e>] _read_lock+0xe/0xa0 [<c044e36d>] _read_unlock+0xd/0x30 [<c044a38a>] vlan_device_event+0x1a/0x1c0 [<e01c43b0>] bond_do_ioctl+0x0/0x310 [bonding] [<c0399c24>] dev_ifsioc+0x334/0x3a0 [<c0399e87>] dev_ioctl+0x1f7/0x270 [<c03d7edc>] inet_ioctl+0x9c/0xb0 [<c038eb59>] sock_ioctl+0xc9/0x1e0 [<c017f53e>] do_ioctl+0x8e/0xa0 [<c017f735>] vfs_ioctl+0x65/0x1f0 [<c017f905>] sys_ioctl+0x45/0x70 [<c010345b>] sysenter_past_esp+0x54/0x75 Code: c0 84 c0 74 22 85 d2 75 0a 89 c8 83 c4 08 e9 a4 f7 ff ff 89 54 24 04 89 0c 24 e8 88 f1 ff ff 90 8d b4 26 00 00 00 00 83 c4 08 c3 <0f> 0b f6 03 40 f4 47 c0 eb c4 89 f6 85 c0 74 2c 05 00 00 00 40 bonding: Warning : no link monitoring support for eth0 skge eth0: disabling interface Unable to handle kernel NULL pointer dereference at virtual address 00000004 printing eip: c03060a0 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: bonding CPU: 0 EIP: 0060:[<c03060a0>] Not tainted VLI EFLAGS: 00010282 (2.6.13.1) EIP is at skge_rx_clean+0x10/0x60 eax: 00000000 ebx: 00000000 ecx: 00000001 edx: 00000001 esi: c155564c edi: c1555620 ebp: 00000000 esp: d9f4bda8 ds: 007b es: 007b ss: 0068 Process ifenslave (pid: 680, threadinfo=d9f4a000 task=d9f63a60) Stack: 00000000 c158bd80 00000000 c030862f c1555620 00000000 df43d600 da2f6bf8 00000001 c1555400 d9f4be44 c1555620 c0309f34 c1555400 00000046 00000000 d9f4be44 c1555400 d9f4be4c d9f4be46 c03998b0 c1555400 d9f4be44 c0124ad7 Call Trace: [<c030862f>] skge_down+0x13f/0x1e0 [<c0309f34>] skge_set_mac_address+0x74/0x100 [<c03998b0>] dev_set_mac_address+0x40/0x80 [<c0124ad7>] printk+0x17/0x20 [<e01bf560>] bond_enslave+0x180/0x860 [bonding] [<c011fa37>] __wake_up_locked+0x27/0x30 [<c044e39f>] _spin_unlock_irqrestore+0xf/0x30 [<c010244a>] __down_trylock+0x3a/0x60 [<e01c24be>] bond_do_ioctl+0x10e/0x310 [bonding] [<c044e39f>] _spin_unlock_irqrestore+0xf/0x30 [<c010244a>] __down_trylock+0x3a/0x60 [<c03d51c3>] inet_insert_ifa+0x113/0x150 [<e01c23b0>] bond_do_ioctl+0x0/0x310 [bonding] [<c0399c24>] dev_ifsioc+0x334/0x3a0 [<c0399e87>] dev_ioctl+0x1f7/0x270 [<c03d7edc>] inet_ioctl+0x9c/0xb0 [<c038eb59>] sock_ioctl+0xc9/0x1e0 [<c017f53e>] do_ioctl+0x8e/0xa0 [<c017f735>] vfs_ioctl+0x65/0x1f0 [<c017f905>] sys_ioctl+0x45/0x70 [<c010345b>] sysenter_past_esp+0x54/0x75 Code: 44 24 08 8b 52 04 66 c7 42 18 00 00 66 c7 42 1c 0e 00 0d 00 00 56 c8 89 02 c3 90 56 53 83 ec 04 8b 74 24 10 83 c6 2c 8b 5e 08 90 <8b> 43 04 c7 00 00 00 00 00 8b 53 08 85 d2 74 1e 8b 82 90 00 00 Steps to reproduce: Call "ifenslave bond0 eth0", where eth0 is Yukon rev 1, driven by skge. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
Fixed in 2.6.14-rc2 and scheduled for 2.6.13.3