Distribution:ubuntu Hardware Environment: Tyan S2875 Tiger K8w Rev 1.02 motherboard dual opteron 246 PCI nvidia graphics card on agp prodigy 7.1 sound card noname pci tv card Software Environment: Latest motherboard bios, ubuntu distribution, kernel from kernel.org mirror But problem occurs on ubuntu kernels 2.6.10, 2.6.11 also. Problem occurs on all versions I have tried. Problem Description: Poweroff from linux, either shutdown -h now, or press powerbutton, shuts system down but doesnt stop fans or poweroff the motherboard. The value FF is left in LEDS on motherboard. Pressing reset or power button will not restart the computer. Poweroff in bios setup works. Steps to reproduce: Shutdown and see if it stops. A lot of debugging info was suggested at acpi4linux site. Unfortunately it comes in at 117K and there is a 65 K limit on bug descriptions. So some information is selectively deleted. kernel has acpi debug enabled. dmesg output Linux version 2.6.12.2 (root@athena) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #2 SMP Thu Jul 7 21:12:57 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) BIOS-e820: 00000000bfff0000 - 00000000bffff000 (ACPI data) BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) 4224MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 NX (Execute Disable) protection: active On node 0 totalpages: 1310720 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 1081344 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000f6cf0 ACPI: XSDT (v001 A M I OEMXSDT 0x06000514 MSFT 0x00000097) @ 0xbfff0100 ACPI: FADT (v001 A M I OEMFACP 0x06000514 MSFT 0x00000097) @ 0xbfff0281 ACPI: MADT (v001 A M I OEMAPIC 0x06000514 MSFT 0x00000097) @ 0xbfff0380 ACPI: OEMB (v001 A M I OEMBIOS 0x06000514 MSFT 0x00000097) @ 0xbffff040 ACPI: HPET (v001 A M I OEMHPET 0x06000514 MSFT 0x00000097) @ 0xbfff3990 ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0xbfff39d0 ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x102282a0 base: 0xfec01000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c0000000 (gap: c0000000:3f780000) Built 1 zonelists Kernel command line: root=/dev/hda5 ro quiet splash mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 4143200k/5242880k available (1794k kernel code, 49752k reserved, 839k data, 212k init, 3276736k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfec01000, IRQs 2, 8, 0 hpet0: 0ns tick, 3 32-bit timers Using HPET for base-timer Using HPET for gettimeofday Detected 1991.685 MHz processor. Using hpet for high-res timesource Calibrating delay loop... 3932.16 BogoMIPS (lpj=1966080) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:........................................................................................................................................... Table [DSDT](id F004) - 463 Objects with 41 Devices 139 Methods 12 Regions ACPI Namespace successfully loaded at root c03f3dc0 evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful CPU0: AMD Opteron(tm) Processor 246 stepping 0a Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay loop... 3997.69 BogoMIPS (lpj=1998848) CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Opteron(tm) Processor 246 stepping 0a Total of 2 processors activated (7929.85 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 4680k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 evgpeblk-0987 [06] ev_create_gpe_block : Found 5 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-0979 [06] ev_create_gpe_block : GPE 10 to 2F [_GPE] 4 regs on int 0x9 evgpeblk-0987 [06] ev_create_gpe_block : Found 0 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:.............................................................................................................. Initialized 11/12 Regions 26/26 Fields 52/52 Buffers 21/21 Packages (472 nodes) Executing all Device _STA and_INI methods:............................................... 47 Devices found containing: 47 _STA, 0 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x680-0x6ff has been reserved pnp: 00:0a: ioport range 0x295-0x296 has been reserved pnp: 00:0a: ioport range 0x778-0x77f has been reserved pnp: 00:0a: ioport range 0xb78-0xb7f has been reserved pnp: 00:0a: ioport range 0xf78-0xf7f has been reserved audit: initializing netlink socket (disabled) audit(1120740234.257:0): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_acpi_add: no address or irqs in _CRS PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize NET: Registered protocol family 2 IP: routing cache hash table of 32768 buckets, 512Kbytes TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 PM: Checking swsusp image. PM: Resume from disk failed. ACPI wakeup devices: PCI1 USB0 USB1 PS2K PS2M UAR1 UAR2 SMBC AC97 MODM PWRB ACPI: (supports S0 S1 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4680KiB [1 disk] into ram disk... <snipped binary> done. VFS: Mounted root (cramfs filesystem) readonly. input: AT Translated Set 2 keyboard on isa0060/serio0 Freeing unused kernel memory: 212k freed ACPI: Processor [CPU1] (supports 8 throttling states) acpi_processor-0484 [06] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x3 acpi_processor-0484 [06] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x4 NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST340810A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > Attempting manual resume PM: Checking swsusp image. swsusp: Resume From Partition 3:3 swsusp: Suspend partition has wrong signature? swsusp: Error -22 check for resume file PM: Resume from disk failed. ext3: No journal on filesystem on hda5 Adding 4096564k swap on /dev/hda3. Priority:-1 extents:1 hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 lp: driver loaded but no devices found mice: PS/2 mouse device common for all mice logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse on isa0060/serio1 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 ts: Compaq touchscreen protocol output cdrom: open failed. device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP] lp0: using parport0 (interrupt-driven). Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AMD 8151 AGP Bridge rev B3 agpgart: AGP aperture is 32M @ 0xe0000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: HPC vendor_id 1022 device_id 7455 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hw_random: AMD768 system management I/O registers at 0x1000. hw_random hardware driver 1.0.0 loaded ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 17 intel8x0_measure_ac97_clock: measured 49625 usecs intel8x0: clocking to 48000 usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:02:00.0[D] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:02:00.0: Advanced Micro Devices [AMD] AMD-8111 USB ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:02:00.0: irq 19, io mem 0xfeafd000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:02:00.1[D] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:02:00.1: Advanced Micro Devices [AMD] AMD-8111 USB (#2) ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:02:00.1: irq 19, io mem 0xfeafe000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected Intel(R) PRO/1000 Network Driver - version 6.0.54-k2 Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 18 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection SCSI subsystem initialized libata version 1.11 loaded. sata_sil version 0.9 ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 19 (level, low) -> IRQ 19 ata1: SATA max UDMA/100 cmd 0xF8C5AC80 ctl 0xF8C5AC8A bmdma 0xF8C5AC00 irq 19 ata2: SATA max UDMA/100 cmd 0xF8C5ACC0 ctl 0xF8C5ACCA bmdma 0xF8C5AC08 irq 19 ata3: SATA max UDMA/100 cmd 0xF8C5AE80 ctl 0xF8C5AE8A bmdma 0xF8C5AE00 irq 19 ata4: SATA max UDMA/100 cmd 0xF8C5AEC0 ctl 0xF8C5AECA bmdma 0xF8C5AE08 irq 19 ata1: no device found (phy stat 00000000) scsi0 : sata_sil ata2: no device found (phy stat 00000000) scsi1 : sata_sil ata3: no device found (phy stat 00000000) scsi2 : sata_sil ata4: no device found (phy stat 00000000) scsi3 : sata_sil ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19 ice1724: Using board model Audiotrak Prodigy 7.1 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org> ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Via IRQ fixup for 0000:02:0a.0, from 9 to 1 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[feaff000-feaff7ff] Max Packet=[2048] USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Via IRQ fixup for 0000:02:0b.0, from 9 to 1 uhci_hcd 0000:02:0b.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:02:0b.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:02:0b.0: irq 17, io base 0x0000b000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:02:0b.1[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:02:0b.1, from 5 to 2 uhci_hcd 0000:02:0b.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:02:0b.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:02:0b.1: irq 18, io base 0x0000b080 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:02:0b.2[C] -> GSI 19 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:02:0b.2, from 10 to 3 ehci_hcd 0000:02:0b.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:02:0b.2: new USB bus registered, assigned bus number 5 ehci_hcd 0000:02:0b.2: irq 19, io mem 0xfeaff800 ehci_hcd 0000:02:0b.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 5-0:1.0: USB hub found hub 5-0:1.0: 4 ports detected usb 5-4: new high speed USB device using ehci_hcd and address 2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0810000306a3a] ttyS3: LSR safety check engaged! ttyS3: LSR safety check engaged! ACPI: Power Button (FF) [PWRF] NET: Registered protocol family 10 Disabled Privacy Extensions on device c0362080(lo) IPv6 over IPv4 tunneling driver dmidecode # dmidecode 2.5 SMBIOS 2.3 present. 55 structures occupying 2171 bytes. Table at 0x000F9A00. Handle 0x0000 DMI type 0, 20 bytes. BIOS Information Vendor: American Megatrends Inc. Version: 080010 Release Date: 06/14/2005 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Function key-initiated network boot is supported Handle 0x0001 DMI type 1, 25 bytes. System Information Manufacturer: To Be Filled By O.E.M. Product Name: To Be Filled By O.E.M. Version: To Be Filled By O.E.M. Serial Number: To Be Filled By O.E.M. UUID: 00020003-0004-0005-0006-000700080009 Wake-up Type: PCI PME# Handle 0x0002 DMI type 2, 8 bytes. Base Board Information Manufacturer: TYAN Product Name: TYAN Tiger K8W Dual AMD Opteron, S2875 Version: To be filled by O.E.M. Serial Number: To be filled by O.E.M. Handle 0x0004 DMI type 4, 35 bytes. Processor Information Socket Designation: CPU 1 Type: Central Processor Family: Opteron Manufacturer: AMD ID: 5A 0F 00 00 FF FB 8B 07 Signature: Extended Family 0, Model 5, Stepping A Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) Version: AMD Opteron(tm) Processor 246 Voltage: 3.3 V 2.9 V External Clock: 200 MHz Max Speed: 2000 MHz Current Speed: 2000 MHz Status: Populated, Enabled Upgrade: Socket 940 L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Handle 0x0017 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J6J1 - SEC IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0018 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J4J1 - FLOPPY Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0019 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J9H1 - FRONT PNL Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001A DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J1B1 - CHASSIS REAR FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001B DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J2F1 - CPU FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001C DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J8B4 - FRONT FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001D DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J9G2 - FNT USB Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001E DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J6C3 - FP AUD Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001F DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J9G1 - CONFIG Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0020 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J8C1 - SCSI LED Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other . . Handle 0x0023 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J2H1 - MAIN POWER Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0024 DMI type 9, 13 bytes. System Slot Information Designation: AGP Type: 32-bit AGP 4x Current Usage: Available Length: Short ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0025 DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0026 DMI type 9, 13 bytes. System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: In Use Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0027 DMI type 9, 13 bytes. System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: Available Length: Short ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0028 DMI type 9, 13 bytes. System Slot Information Designation: PCI4 Type: 32-bit PCI Current Usage: Available Length: Short ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0029 DMI type 10, 6 bytes. On Board Device Information Type: Video Status: Enabled Description: To Be Filled By O.E.M. Handle 0x002A DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x002B DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Single-bit ECC Maximum Capacity: 12 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x002C DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0013FFFFFFF Range Size: 5 GB Physical Array Handle: 0x002B Partition Width: 0 Handle 0x002D DMI type 17, 27 bytes. Memory Device Array Handle: 0x002B Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: SDRAM Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer0 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: PartNum0 Handle 0x002E DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x002D Memory Array Mapped Address Handle: 0x002C Partition Row Position: 1 Handle 0x002F DMI type 17, 27 bytes. Memory Device Array Handle: 0x002B Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK1 Type: SDRAM Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer1 Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: PartNum1 Handle 0x0035 DMI type 32, 20 bytes. System Boot Information Status: No errors detected Handle 0x0036 DMI type 127, 4 bytes. End Of Table acpidmp output RSDP "ACPIAM" @ 0x000f6cf0 0000: 52 53 44 20 50 54 52 20 76 41 43 50 49 41 4d 02 RSD PTR vACPIAM. 0010: 00 00 ff bf .... RSDT @ 0xbfff0000 0000: 52 53 44 54 38 00 00 00 01 e8 41 20 4d 20 49 20 RSDT8.....A M I 0010: 4f 45 4d 52 53 44 54 20 14 05 00 06 4d 53 46 54 OEMRSDT ....MSFT 0020: 97 00 00 00 00 02 ff bf 80 03 ff bf 40 f0 ff bf ............@... 0030: 90 39 ff bf d0 39 ff bf .9...9.. FACP @ 0xbfff0200 0000: 46 41 43 50 81 00 00 00 01 b5 41 20 4d 20 49 20 FACP......A M I 0010: 4f 45 4d 46 41 43 50 20 14 05 00 06 4d 53 46 54 OEMFACP ....MSFT 0020: 97 00 00 00 00 f0 ff bf f0 03 ff bf 01 00 09 00 ................ 0030: 2f 10 00 00 e1 1e 00 e2 00 10 00 00 00 00 00 00 /............... 0040: 04 10 00 00 00 00 00 00 00 00 00 00 08 10 00 00 ................ 0050: 20 10 00 00 b0 10 00 00 04 02 00 04 04 08 10 e3 ............... 0060: 65 00 e9 03 00 04 10 00 01 03 7d 7e 7f 03 00 00 e.........}~.... 0070: a5 10 00 00 01 08 00 00 f9 0c 00 00 00 00 00 00 ................ 0080: 06 . DSDT @ 0xbfff03f0 0000: 44 53 44 54 9d 35 00 00 01 82 30 41 41 41 41 00 DSDT.5....0AAAA. 0010: 30 41 41 41 41 30 30 30 00 00 00 00 49 4e 54 4c 0AAAA000....INTL 0020: 26 20 00 02 5b 80 42 49 4f 53 00 0c 64 f0 ff bf & ..[.BIOS..d... 0030: 0a ff 5b 81 45 04 42 49 4f 53 01 53 53 31 5f 01 ..[.E.BIOS.SS1_. 0040: 53 53 32 5f 01 53 53 33 5f 01 53 53 34 5f 01 00 SS2_.SS3_.SS4_.. 0050: 04 49 4f 53 54 10 54 4f 50 4d 20 52 4f 4d 53 20 .IOST.TOPM ROMS 0060: 4d 47 31 42 20 4d 47 31 4c 20 4d 47 32 42 20 4d MG1B MG1L MG2B M 0070: 47 32 4c 20 53 4d 32 42 10 08 53 50 49 4f 0a 2e G2L SM2B..SPIO.. 0080: 08 49 4f 31 42 0b 80 06 08 49 4f 31 4c 0a 80 08 .IO1B....IO1L... 0090: 49 4f 32 42 0b 95 02 08 49 4f 32 4c 0a 02 08 50 IO2B....IO2L...P 00a0: 4d 42 53 0b 00 10 08 50 4d 4c 4e 0a c0 08 47 50 MBS....PMLN...GP 00b0: 42 53 0b c0 10 08 47 50 4c 4e 0a 20 08 53 4d 42 BS....GPLN. .SMB 00c0: 53 0b e0 10 08 53 4d 42 4c 0a 20 08 41 50 43 42 S....SMBL. .APCB 00d0: 0c 00 00 c0 fe 08 41 50 43 4c 0b 00 10 14 0f 52 ......APCL.....R 00e0: 52 49 4f 04 70 0d 52 52 49 4f 00 5b 31 14 0f 52 RIO.p.RRIO.[1..R 00f0: 44 4d 41 03 70 0d 72 44 4d 41 00 5b 31 08 50 49 DMA.p.rDMA.[1.PI snipped a lot 32e0: 08 5b 80 50 52 53 54 01 0b f9 0c 0a 01 5b 81 0b .[.PRST......[.. 32f0: 50 52 53 54 01 42 43 46 39 08 14 4d 0c 5f 50 54 PRST.BCF9..M._PT 3300: 53 01 70 68 44 42 47 38 50 54 53 5f 68 70 0a ff S.phDBG8PTS_hp.. 3570: 04 5f 53 42 5f 50 43 49 30 53 42 52 47 53 49 4f ._SB_PCI0SBRGSIO 3580: 53 68 14 1a 57 41 4b 5f 01 5c 2f 04 5f 53 42 5f Sh..WAK_.\/._SB_ 3590: 50 43 49 30 53 42 52 47 53 49 4f 57 68 PCI0SBRGSIOWh FACS @ 0xbffff000 0000: 46 41 43 53 40 00 00 00 00 00 00 00 00 00 00 00 FACS@........... 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ APIC @ 0xbfff0380 0000: 41 50 49 43 6c 00 00 00 01 37 41 20 4d 20 49 20 APICl....7A M I 0010: 4f 45 4d 41 50 49 43 20 14 05 00 06 4d 53 46 54 OEMAPIC ....MSFT 0020: 97 00 00 00 00 00 e0 fe 01 00 00 00 00 08 01 00 ................ 0030: 01 00 00 00 00 08 02 01 01 00 00 00 00 08 03 82 ................ 0040: 00 00 00 00 00 08 04 83 00 00 00 00 01 0c 02 00 ................ 0050: 00 00 c0 fe 00 00 00 00 02 0a 00 00 02 00 00 00 ................ 0060: 00 00 02 0a 00 00 02 00 00 00 00 00 ............ OEMB @ 0xbffff040 0000: 4f 45 4d 42 41 00 00 00 01 27 41 20 4d 20 49 20 OEMBA....'A M I 0010: 4f 45 4d 42 49 4f 53 20 14 05 00 06 4d 53 46 54 OEMBIOS ....MSFT 0020: 97 00 00 00 01 0f 14 00 00 00 c0 00 00 f8 ff 00 ................ 0030: 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 40 80 ..............@. 0040: c4 . HPET @ 0xbfff3990 0000: 48 50 45 54 38 00 00 00 01 12 41 20 4d 20 49 20 HPET8.....A M I 0010: 4f 45 4d 48 50 45 54 20 14 05 00 06 4d 53 46 54 OEMHPET ....MSFT 0020: 97 00 00 00 a0 82 22 10 00 08 00 00 00 10 c0 fe ......"......... 0030: 00 00 00 00 00 01 00 00 ........ ASF! @ 0xbfff39d0 0000: 41 53 46 21 86 00 00 00 01 6b 41 4d 49 41 53 46 ASF!.....kAMIASF 0010: 41 4d 44 53 54 52 45 54 01 00 00 00 49 4e 54 4c AMDSTRET....INTL 0020: 26 20 00 02 00 00 10 00 63 03 3b 00 00 00 12 34 & ......c.;....4 0030: 00 00 00 00 01 00 20 00 00 00 02 0c 01 02 03 04 ...... ......... 0040: 05 06 07 08 09 0a 0b 0c 0c 0b 0a 09 08 07 06 05 ................ 0050: 04 03 02 01 02 00 10 00 02 0c 00 00 01 02 03 04 ................ 0060: 04 03 02 01 03 00 17 00 00 00 00 00 00 00 00 00 ................ 0070: 00 00 00 00 00 00 00 00 00 00 00 84 00 0b 00 00 ................ 0080: 05 c0 c2 c4 c8 cc ...... lspci output 0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System Controller (rev 14) Subsystem: Advanced Micro Devices [AMD] AMD-8151 System Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Capabilities: [a0] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh+ GART64- HTrans- 64bit+ FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [c0] #08 [0060] 0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev 14) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: fc800000-fe8fffff Prefetchable memory behind bridge: cc700000-dc6fffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- 0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000a000-0000bfff Memory behind bridge: fe900000-feafffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [c0] #08 [0086] Capabilities: [f0] #08 [8000] 0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) Subsystem: Advanced Micro Devices [AMD] AMD-8111 LPC Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices [AMD] AMD-8111 IDE Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at ffa0 [size=16] 0000:00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) Subsystem: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D routed to IRQ 10 Region 0: I/O ports at c480 [size=32] 0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) Subsystem: Advanced Micro Devices [AMD] AMD-8111 ACPI Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-8111 AC97 Audio (rev 03) Subsystem: Tyan Computer: Unknown device 746d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at c800 [size=256] Region 1: I/O ports at cc00 [size=64] 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] #08 [2101] Capabilities: [a0] #08 [2101] Capabilities: [c0] #08 [2101] 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] #08 [2101] Capabilities: [a0] #08 [2101] Capabilities: [c0] #08 [2101] 0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 0000:02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max) Interrupt: pin D routed to IRQ 19 Region 0: Memory at feafd000 (32-bit, non-prefetchable) [size=4K] 0000:02:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max) Interrupt: pin D routed to IRQ 19 Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K] 0000:02:03.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller Subsystem: Intel Corp. PRO/1000 MT Desktop Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (63750ns min), Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 18 Region 0: Memory at feac0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at feaa0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at a480 [size=64] Expansion ROM at fea80000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device. Command: DPERE- ERO+ RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=0, RSCEM- 0000:02:05.0 Unknown mass storage controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3114 [SATALink/SATARaid] Serial ATA Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at bc00 [size=8] Region 1: I/O ports at b880 [size=4] Region 2: I/O ports at b800 [size=8] Region 3: I/O ports at b480 [size=4] Region 4: I/O ports at b400 [size=16] Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K] Expansion ROM at fea00000 [disabled] [size=512K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 0000:02:07.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) Subsystem: Unknown device 4933:4553 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at a880 [size=32] Region 1: I/O ports at a800 [size=128] Capabilities: [80] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:02:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI]) Subsystem: Tyan Computer: Unknown device 3044 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max), Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 17 Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at ac00 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:02:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 17 Region 4: I/O ports at b000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:02:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x10 (64 bytes) Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at b080 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:02:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x10 (64 bytes) Interrupt: pin C routed to IRQ 19 Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- /proc/interrupts CPU0 CPU1 0: 752 513035 IO-APIC-edge timer 1: 0 2188 IO-APIC-edge i8042 7: 0 0 IO-APIC-edge parport0 9: 0 0 IO-APIC-level acpi 12: 0 101 IO-APIC-edge i8042 14: 55 4144 IO-APIC-edge ide0 15: 0 4395 IO-APIC-edge ide1 17: 0 3 IO-APIC-level AMD AMD8111, ohci1394, uhci_hcd:usb3 18: 0 0 IO-APIC-level uhci_hcd:usb4 19: 43 53437 IO-APIC-level ohci_hcd:usb1, ohci_hcd:usb2, libata, ICE1724, ehci_hcd:usb5 NMI: 0 0 LOC: 513652 513651 ERR: 0 MIS: 0
Pressing reset does restart the system. Takes a little time. The linux poweroff function appears to do everything it is supposed to, right up to the point of writing SLP_TYPx and SLP_EN to the PM1A_CNT register, where the hardware locks up. The SLP_TYPx value appears to be the correct value from the \_S5_ object. So I would say this isnt a linux problem. Sorry. ~
please test with 2.6.13-rc6
Peter, there was a lot of changes to the shutdown/reboot during 2.6.13-rcX series. The -rc1 broke some things and it got fixed in 2.6.13. Len, I observe also ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1]) ACPI: Processor [CPU1] (supports 8 throttling states) acpi_processor-0521 [06] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x2 acpi_processor-0521 [06] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x3 for MSI dual-xeon motherboard on 2.6.13.2, should I open a new bug? I have no problems, just the message in "dmesg".
No response from submitter. Please reopen if problem is still present.
On Wed, Sep 21, 2005 at 04:06:28PM -0700, bugme-daemon@kernel-bugs.osdl.org wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=4859 > > mmokrejs@ribosome.natur.cuni.cz changed: > > What |Removed |Added > ---------------------------------------------------------------------------- > CC| |mmokrejs@ribosome.natur.cuni > | |.cz > > > > ------- Additional Comments From mmokrejs@ribosome.natur.cuni.cz 2005-09-21 > 16:06 ------- > Peter, there was a lot of changes to the shutdown/reboot during 2.6.13-rcX > series. > The -rc1 broke some things and it got fixed in 2.6.13. > > Len, I observe also > > ACPI: Power Button (FF) [PWRF] > ACPI: Power Button (CM) [PWRB] > ACPI: CPU0 (power states: C1[C1]) > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: CPU1 (power states: C1[C1]) > ACPI: Processor [CPU1] (supports 8 throttling states) > acpi_processor-0521 [06] acpi_processor_get_inf: Error getting cpuindex for > acpiid 0x2 > acpi_processor-0521 [06] acpi_processor_get_inf: Error getting cpuindex for > acpiid 0x3 > > > for MSI dual-xeon motherboard on 2.6.13.2, should I open a new bug? I have no > problems, just the message in "dmesg". > > ------- You are receiving this mail because: ------- > You reported the bug, or are watching the reporter. Sorry about long silence. I did track the problem in the 2.6.12 kernel, writing to the mainboard LED and concluding that the kernel was indeed halting where it was supposed to in drivers/acpi/hardware/hwsleep.c, function acpi_enter_sleep_state, calling acpi_hw_register_write, but leaving fans and power on. This was about 12 months ago. I concluded it was a board problem, because the kernel software seemed to be doing everything according to spec. I loaded up debian 2.6.8, and the board shut down correctly. Then I loaded up debian 2.6.16,17 and board no longer shut down. Then I wrote to /proc/acpi/alarm, and board shuts down correctly. I believe it is a buggy-bios-firmware problem.