Distribution: Slackware 10.0 Hardware Environment: AMD nForce2 and Pentium 4 Brookdale Software Environment: cdrecord - latest version. Problem Description: When recording Audio CD's with cdrecord the output produced is of an alien sound. The best way to describe it would be like the sound that a modem makes. The tracks are recorded at the correct length, and cd play programs show the correct artist/album. This has been reproduced on 2 separate machine types: AMD XP with nForce2 chipset Intel P4 with the 82845G/GL Brookdale-G/GE/PE chipset. Both machines are nearly mechanically identical. Both have a single ATA 100 IDE disk on ide0 Primary. Both have 2 CD's on ide1. The ide1 primaries are a CD-ROm/16X DVD Player and the secondarys are CD-RW 52x52x52. I can boot into the Slackware stock 2.4.27 kernel and re-run the cdrecord command and it will burn correctly. I have applied the 2.6.8.1 patch for audio memory leak (see item 8.0 for specifics). Steps to reproduce: cdrecord -v speed=8 dev=ATAPI:0,1,0 -audio track* [3.] Applies to: CD/RW, kernel, ATAPI [4.] Kernel version (from /proc/version): AMD System; Linux version 2.6.8.1 (root@desktop) (gcc version 3.3.4) #4 Sat Aug 21 09:47:27 CDT 2004 Intel System: Linux version 2.6.8.1 (root@ottnlee) (gcc version 3.3.4) #1 Fri Aug 20 14:16:55 CDT 2004 [5.] No oops. [6.] cdrecord -v speed=8 dev=ATAPI:0,1,0 -audio track* [7.] Environment: AMD machine: Slackware 10.0 Cdrecord 2.00.3 (i686-pc-linux-gnu) i Copyright (C) 1995-2002 Jorg Schilling Intel machine: Slackware 10.0 Cdrecord 2.00.3 (i686-pc-linux-gnu) i Copyright (C) 1995-2002 Jorg Schilling [7.1.] Software: AMD Machine: Linux desktop 2.6.8.1 #4 Sat Aug 21 09:47:27 CDT 2004 i686 unknown unknown GNU/Linux Gnu C 3.3.4 Gnu make 3.80 binutils 2.15.90.0.3 util-linux 2.12a mount 2.12a module-init-tools 3.0 e2fsprogs 1.35 PPP 2.4.2 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Linux C++ Library 5.0.6 Procps 3.2.1 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 Modules Loaded uhci_hcd ohci_hcd ehci_hcd usbcore shpchp pciehp pci_hotplug nvidia evdev ide_scsi scsi_mod gen rtc Intel machine: Linux ottnlee 2.6.8.1 #1 Fri Aug 20 14:16:55 CDT 2004 i686 unknown unknown GNU/Linux Gnu C 3.3.4 Gnu make 3.80 binutils 2.15.90.0.3 util-linux 2.12a mount 2.12a module-init-tools 3.0 e2fsprogs 1.35 PPP 2.4.2 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Linux C++ Library 5.0.6 Procps 3.2.1 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 Modules Loaded snd_pcm_oss snd_mixer_oss ohci_hcd i intel_agp uhci_hcd ehci_hcd usbcore i shpchp pciehp pci_hotplug i8xx_tco i snd_intel8x0 snd_ac97_codec snd_pcm i snd_timer snd_page_alloc gameport i snd_mpu401_uart snd_rawmidi snd_seq_device snd nvidia 8139too ide_scsi genrtc [7.2.] Processor information AMD machine: processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 8 model name : AMD Athlon(tm) XP 2600+ stepping : 1 cpu MHz : 2079.578 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 4120.57 Intel machine: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.80GHz stepping : 9 cpu MHz : 2793.242 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 5537.79 [7.3.] Module information (from /proc/modules): AMD Machine: uhci_hcd 32784 0 - Live 0xf8ad8000 ohci_hcd 21636 0 - Live 0xf8a9f000 ehci_hcd 31364 0 - Live 0xf8a96000 usbcore 119268 5 uhci_hcd,ohci_hcd,ehci_hcd, Live 0xf8ab9000 shpchp 101292 0 - Live 0xf8a5e000 pciehp 97836 0 - Live 0xf8a7d000 pci_hotplug 12164 2 shpchp,pciehp, Live 0xf8a3a000 nvidia 4821268 0 - Live 0xf8f52000 evdev 9536 0 - Live 0xf8a2d000 ide_scsi 17476 0 - Live 0xf8a34000 scsi_mod 84032 1 ide_scsi, Live 0xf8a48000 genrtc 9844 0 - Live 0xf8a29000snd_pcm_oss 53928 0 - Live 0xf8a79000 Intel Machine: snd_mixer_oss 20352 1 snd_pcm_oss, Live 0xf8a62000 ohci_hcd 21508 0 - Live 0xf899c000 intel_agp 22432 1 - Live 0xf8a22000 uhci_hcd 32272 0 - Live 0xf8a19000 ehci_hcd 31108 0 - Live 0xf8a10000 usbcore 116836 5 ohci_hcd,uhci_hcd,ehci_hcd, Live 0xf8a33000 shpchp 100204 0 - Live 0xf89d8000 pciehp 96876 0 - Live 0xf89f7000 pci_hotplug 34096 2 shpchp,pciehp, Live 0xf89a3000 i8xx_tco 7440 0 - Live 0xf8994000 snd_intel8x0 35884 0 - Live 0xf896f000 snd_ac97_codec 68484 1 snd_intel8x0, Live 0xf89c6000 snd_pcm 96392 2 snd_pcm_oss,snd_intel8x0, Live 0xf89ad000 snd_timer 25860 1 snd_pcm, Live 0xf8988000 snd_page_alloc 11912 2 snd_intel8x0,snd_pcm, Live 0xf8959000 gameport 4864 1 snd_intel8x0, Live 0xf8956000 snd_mpu401_uart 8064 1 snd_intel8x0, Live 0xf894d000 snd_rawmidi 25380 1 snd_mpu401_uart, Live 0xf8967000 snd_seq_device 8712 1 snd_rawmidi, Live 0xf8949000 snd 55140 9 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm, snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xf8979000 nvidia 4821716 0 - Live 0xf8e5b000 8139too 25344 0 - Live 0xf895f000 ide_scsi 17284 0 - Live 0xf8950000 genrtc 9972 0 - Live 0xf8945000 [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) AMD Machine: IO-PORTS: 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0cf8-0cff : PCI conf1 5000-5007 : nForce2 SMBus 5040-5047 : nForce2 SMBus c000-dfff : PCI Bus #01 c000-c007 : 0000:01:07.0 c000-c007 : ide2 c400-c403 : 0000:01:07.0 c402-c402 : ide2 c800-c807 : 0000:01:07.0 cc00-cc03 : 0000:01:07.0 d000-d00f : 0000:01:07.0 d000-d007 : ide2 d008-d00f : ide3 e000-e007 : 0000:00:04.0 e000-e007 : forcedeth e400-e4ff : 0000:00:06.0 e800-e87f : 0000:00:06.0 e800-e83f : NVidia nForce2 - Controller ec00-ec1f : 0000:00:01.1 f000-f00f : 0000:00:09.0 f000-f007 : ide0 f008-f00f : ide1 IOMEM: 00000000-0009f7ff : System RAM 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cefff : Video ROM 000d0000-000d17ff : Adapter ROM 000d2000-000d3fff : Adapter ROM 000f0000-000fffff : System ROM 00100000-4ffeffff : System RAM 00100000-0030e92e : Kernel code 0030e92f-003f393f : Kernel data 4fff0000-4fff2fff : ACPI Non-volatile Storage 4fff3000-4fffffff : ACPI Tables e0000000-e3ffffff : 0000:00:00.0 e4000000-e7ffffff : PCI Bus #02 e4000000-e7ffffff : 0000:02:00.0 e8000000-e9ffffff : PCI Bus #02 e8000000-e8ffffff : 0000:02:00.0 e8000000-e8ffffff : nvidia ea000000-eaffffff : PCI Bus #01 eb000000-eb000fff : 0000:00:04.0 eb000000-eb000fff : forcedeth eb001000-eb001fff : 0000:00:06.0 eb001000-eb0011ff : NVidia nForce2 - AC'97 eb002000-eb002fff : 0000:00:02.0 eb002000-eb002fff : ohci_hcd eb003000-eb003fff : 0000:00:02.1 eb003000-eb003fff : ohci_hcd eb004000-eb0040ff : 0000:00:02.2 eb004000-eb0040ff : ehci_hcd Intel machine: IOPORTS: 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0cf8-0cff : PCI conf1 4000-407f : 0000:00:1f.0 4060-406f : i8xx TCO 4080-40bf : 0000:00:1f.0 5000-501f : 0000:00:1f.3 c000-c0ff : 0000:02:04.0 c000-c0ff : 8139too d000-d01f : 0000:00:1d.1 d000-d01f : uhci_hcd d400-d41f : 0000:00:1d.2 d400-d41f : uhci_hcd d800-d81f : 0000:00:1d.0 d800-d81f : uhci_hcd e000-e0ff : 0000:00:1f.5 e400-e43f : 0000:00:1f.5 f000-f00f : 0000:00:1f.1 f000-f007 : ide0 f008-f00f : ide1 IOMEM: 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000ca7ff : Video ROM 000f0000-000fffff : System ROM 00100000-3ffeffff : System RAM 00100000-002b8bef : Kernel code 002b8bf0-003c257f : Kernel data 3fff0000-3fff2fff : ACPI Non-volatile Storage 3fff3000-3fffffff : ACPI Tables 40000000-400003ff : 0000:00:1f.1 e0000000-e7ffffff : PCI Bus #01 e0000000-e7ffffff : 0000:01:00.0 e8000000-ebffffff : 0000:00:00.0 ec000000-edffffff : PCI Bus #01 ec000000-ecffffff : 0000:01:00.0 ec000000-ecffffff : nvidia ee000000-ee0000ff : 0000:02:04.0 ee000000-ee0000ff : 8139too ee100000-ee1003ff : 0000:00:1d.7 ee100000-ee1003ff : ehci_hcd ee101000-ee1011ff : 0000:00:1f.5 ee101000-ee1011ff : Intel 82801DB-ICH4 - AC'97 ee102000-ee1020ff : 0000:00:1f.5 ee102000-ee1020ff : Intel 82801DB-ICH4 - Controller fec00000-ffffffff : reserved [7.5.] PCI information ('lspci -vvv' as root) AMD Machine:------------------------------------------------------------------------- 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [40] AGP version 3.0 Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Capabilities: [60] #08 [2001] 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [48] #08 [01e1] 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 169 Region 0: I/O ports at ec00 [size=32] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 177 Region 0: Memory at eb002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 185 Region 0: Memory at eb003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 193 Region 0: Memory at eb004000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2080] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 570c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 177 Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at e000 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 185 Region 0: I/O ports at e400 [size=256] Region 1: I/O ports at e800 [size=128] Region 2: Memory at eb001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000dfff Memory behind bridge: ea000000-eaffffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 4: I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e8000000-e9ffffff Prefetchable memory behind bridge: e4000000-e7ffffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 01:07.0 SCSI storage controller: Artop Electronic Corp ATP865 (rev 02) Subsystem: Artop Electronic Corp ATP865 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 254 (2750ns min, 1000ns max) Interrupt: pin A routed to IRQ 201 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at c400 [size=4] Region 2: I/O ports at c800 [size=8] Region 3: I/O ports at cc00 [size=4] Region 4: I/O ports at d000 [size=16] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [58] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 209 Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e4000000 (32-bit, prefetchable) [size=64M] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Intel machine PCI: ------------------------------------------------------------------------- 00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) Subsystem: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] #09 [6105] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: e0000000-e7ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: AOPEN Inc.: Unknown device 02c8 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 169 Region 4: I/O ports at d800 [size=32] 00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: AOPEN Inc.: Unknown device 02c8 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 177 Region 4: I/O ports at d000 [size=32] 00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: AOPEN Inc.: Unknown device 02c8 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 185 Region 4: I/O ports at d400 [size=32] 00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: AOPEN Inc.: Unknown device 040a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 193 Region 0: Memory at ee100000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 82) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ee000000-ee0fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801DB (ICH4) LPC Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corp. 82801DB (ICH4) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: AOPEN Inc.: Unknown device 02c8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 185 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at f000 [size=16] Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 02) Subsystem: AOPEN Inc.: Unknown device 02c8 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 201 Region 4: I/O ports at 5000 [size=32] 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 02) Subsystem: AOPEN Inc.: Unknown device 0225 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 201 Region 0: I/O ports at e000 [size=256] Region 1: I/O ports at e400 [size=64] Region 2: Memory at ee101000 (32-bit, non-prefetchable) [size=512] Region 3: Memory at ee102000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA]) Subsystem: VISIONTEK: Unknown device 002c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 169 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 02:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: AOPEN Inc.: Unknown device 0180 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 209 Region 0: I/O ports at c000 [size=256] Region 1: Memory at ee000000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- [7.6.] SCSI information (from /proc/scsi/scsi) AMD and Intel both show no attached devices. [7.7.] Other information that might be relevant to the problem AMD machine Cd Burner on ide1 secondary settings: name value min max mode ---- ----- --- --- ---- acoustic 0 0 254 rw address 0 0 2 rw bios_cyl 25038 0 65535 rw bios_head 16 0 255 rw bios_sect 63 0 63 rw bswap 0 0 1 r current_speed 66 0 70 rw failures 0 0 65535 rw init_speed 66 0 70 rw io_32bit 0 0 3 rw keepsettings 0 0 1 rw lun 0 0 7 rw max_failures 1 0 65535 rw multcount 16 0 16 rw nice1 1 0 1 rw nowerr 0 0 1 rw number 0 0 3 rw pio_mode write-only 0 255 w unmaskirq 0 0 1 rw using_dma 1 0 1 rw wcache 0 0 1 rw Intel machine Cd Burner on ide1 secondary settings: name value min max mode ---- ----- --- --- ---- current_speed 66 0 70 rw dsc_overlap 1 0 1 rw ide-scsi 0 0 1 rw init_speed 66 0 70 rw io_32bit 0 0 3 rw keepsettings 0 0 1 rw nice1 1 0 1 rw number 3 0 3 rw pio_mode write-only 0 255 w unmaskirq 0 0 1 rw using_dma 1 0 1 rw [8.] Other notes, patches, fixes, workarounds: Very Important: I have applied the patch from this link: http://kerneltrap.org/node/view/3659 This was to BOTH the AMD and the Intel Computers. It did not make any difference. Creating audio still produces the "modem" sounds instead of the correct format. Neither machine experienced the "slow" down as reported here, either before or after applying the patch.
Can you try 2.6.9-rc1? It has some fixes (not just the memory leak fix)
I tried with 2.6.9-rc1-bk3 (2.6.9-rc1 would not boot). I popped a cd in and did - cdda2wav -D ATAPI:0,0,0 , the resulting wav file was garbled. I used dev=/dev/hda and wav file was okay. I burned the track with cdrecord dev=/dev/hda,the cd played "staticy and screechy", when using dev=ATAPI:0,0,0 to burn, CD came out fine. I will try bk4 later, and do a sanity check. Thanks!
what about 2.6.15?
D, Using Fedora Linux fed4 2.6.14-1.1653_FC4smp #1 SMP Tue Dec 13 21:46:01 EST 2005 i686 i686 i386 GNU/Linux I did: cdda2wav -D ATAPI:0,0,0 -t 1 Then burned: cdrecord -pad -audio -v speed=8 dev=/dev/hdc audio.wav All worked well. Using: cdda2wav -D /dev/hda -t 1 The resulting wave file played/burned fine with XMMS. T! ----- Original Message ---- From: bugme-daemon@bugzilla.kernel.org To: tspinillo@yahoo.com Sent: Thu 05 Jan 2006 12:13:21 PM EST Subject: [Bug 3263] Recording Audio CDs with kernel 2.6.8.1 still does not work http://bugzilla.kernel.org/show_bug.cgi?id=3263 DiegoCG@teleline.es changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |diegocg@teleline.es ------- Additional Comments From DiegoCG@teleline.es 2006-01-05 09:02 ------- what about 2.6.15? ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
ok, so I'm closing this