I cannot load Express cards without getting irq errors such as this one for the Ubiquiti SRX Wireless card: [ 12.429860] ath5k_pci 0000:06:00.0: PCI INT A -> GSI 0 (level, low) -> IRQ 0 [ 12.429868] ath5k_pci 0000:06:00.0: setting latency timer to 64 [ 12.429969] ath5k_pci 0000:06:00.0: registered as 'phy0' [ 12.429972] ath5k phy0: request_irq failed [ 12.429980] ath5k_pci 0000:06:00.0: PCI INT A disabled [ 12.429984] ath5k_pci: probe of 0000:06:00.0 failed with error -16 Ive tried multiple cards, all with similar results. I am dual booting a Macbook Pro 5,2. Ive also had extensive troubleshooting sessions with other experts, and the fault seems not to be in the Modules. I know my express card slot works in OSX, and the cards work in other circumstances. Just to make sure I tried the ubuntu live cd on another comupter and had the express card inserted. It worked fine. I also tried BackTrack, a security suite built on ubuntu, and had injection working without further todo. The problem is tied to this slot in linux. None of the hardware seem to be defective. Heres the response from SIIG FireWire 800 ExpressCard: [ 4.012024] ohci1394 0000:0e:00.0: PCI INT A -> GSI 0 (level, low) -> IRQ 0 [ 4.061725] ohci1394: Failed to allocate interrupt 0 [ 4.063134] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:4b:bb:e7:6c [ 4.063136] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 4.064006] ohci1394: probe of 0000:0e:00.0 failed with error -12 Trying a third card, a card reader, which appears to load, ( I have not mounted any drive though). The key here, seems that cards that enumerated as USB work. So Express Cards in USB Mode work, but Express Cards in PCIE Mode error out on trying to set the device to IRQ 0. After talking to some people on #ubuntu-kernel, I tried the mainline 2.6.31 kernel, producing the same problem. Here's the complete dmesg from that (this also includes another attempt to manually insert the module): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-999-generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #200909011000 SMP Tue Sep 1 09:53:28 UTC 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000ae837000 (usable) [ 0.000000] BIOS-e820: 00000000ae837000 - 00000000ae839000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ae839000 - 00000000ae83a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ae83a000 - 00000000ae83c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ae83c000 - 00000000ae855000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ae855000 - 00000000aea56000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000aea56000 - 00000000afebb000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afebb000 - 00000000afec7000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afec7000 - 00000000afec8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afec8000 - 00000000afeca000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afeca000 - 00000000afecd000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afecd000 - 00000000afed6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afed6000 - 00000000afed7000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afed7000 - 00000000afedf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afedf000 - 00000000afef9000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afef9000 - 00000000afeff000 (reserved) [ 0.000000] BIOS-e820: 00000000afeff000 - 00000000aff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000df500000 - 00000000df501000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xae837 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 disabled [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FE0000000 write-back [ 0.000000] 3 base 0A0000000 mask FF0000000 write-back [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 base 140000000 mask FF0000000 write-back [ 0.000000] 6 base 0AFF00000 mask FFFF00000 uncachable [ 0.000000] 7 disabled [ 0.000000] e820 update range: 00000000aff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000ae837000 (usable) [ 0.000000] modified: 00000000ae837000 - 00000000ae839000 (ACPI NVS) [ 0.000000] modified: 00000000ae839000 - 00000000ae83a000 (ACPI data) [ 0.000000] modified: 00000000ae83a000 - 00000000ae83c000 (ACPI NVS) [ 0.000000] modified: 00000000ae83c000 - 00000000ae855000 (ACPI data) [ 0.000000] modified: 00000000ae855000 - 00000000aea56000 (ACPI NVS) [ 0.000000] modified: 00000000aea56000 - 00000000afebb000 (ACPI data) [ 0.000000] modified: 00000000afebb000 - 00000000afec7000 (ACPI NVS) [ 0.000000] modified: 00000000afec7000 - 00000000afec8000 (ACPI data) [ 0.000000] modified: 00000000afec8000 - 00000000afeca000 (ACPI NVS) [ 0.000000] modified: 00000000afeca000 - 00000000afecd000 (ACPI data) [ 0.000000] modified: 00000000afecd000 - 00000000afed6000 (ACPI NVS) [ 0.000000] modified: 00000000afed6000 - 00000000afed7000 (ACPI data) [ 0.000000] modified: 00000000afed7000 - 00000000afedf000 (ACPI NVS) [ 0.000000] modified: 00000000afedf000 - 00000000afef9000 (ACPI data) [ 0.000000] modified: 00000000afef9000 - 00000000afeff000 (reserved) [ 0.000000] modified: 00000000afeff000 - 00000000aff00000 (ACPI data) [ 0.000000] modified: 00000000df500000 - 00000000df501000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3785c000 - 37fef5a0 [ 0.000000] Allocated new RAMDISK: 008ad000 - 010405a0 [ 0.000000] Move RAMDISK from 000000003785c000 - 0000000037fef59f to 008ad000 - 0104059f [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 APPLE ) [ 0.000000] ACPI: XSDT afeee1c0 00074 (v01 APPLE Apple00 0000008E 01000013) [ 0.000000] ACPI: FACP afeec000 000F4 (v03 APPLE Apple00 0000008E Loki 0000005F) [ 0.000000] ACPI: DSDT afedf000 06473 (v01 APPLE MacBookP 00050002 INTL 20061109) [ 0.000000] ACPI: FACS afecd000 00040 [ 0.000000] ACPI: HPET afeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC afeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: MCFG afee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ASF! afee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SBST afee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ECDT afee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT afec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT afecc000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT afecb000 0009F (v01 SataRe SataSec 00001000 INTL 20061109) [ 0.000000] ACPI: DMI BIOS year==0, assuming ACPI-capable machine [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1904MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a8fe0] TEXT DATA BSS ==> [0000100000 - 00008a8fe0] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac1b1] BRK ==> [00008a9000 - 00008ac1b1] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 00010405a0] NEW RAMDISK ==> [00008ad000 - 00010405a0] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000ae837 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000ae837 [ 0.000000] On node 0 totalpages: 714706 [ 0.000000] free_area_init_node: node 0, pgdat c0780420, node_mem_map c1041000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3809 pages used for memmap [ 0.000000] HighMem zone: 483672 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:2f600000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2623000, static data 35004 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 709121 [ 0.000000] Kernel command line: root=UUID=ec8e2e94-1441-4a2e-9d81-1a138ee21498 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 14296140 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000ae837) [ 0.000000] Memory: 2805032k/2859228k available (4519k kernel code, 52928k reserved, 2170k data, 564k init, 1949924k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0789000 - 0xc0816000 ( 564 kB) [ 0.000000] .data : 0xc0569f25 - 0xc0788ac8 (2170 kB) [ 0.000000] .text : 0xc0100000 - 0xc0569f25 (4519 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2653.005 MHz processor. [ 0.000014] spurious 8259A interrupt: IRQ7. [ 0.003276] Console: colour VGA+ 80x25 [ 0.003279] console [tty0] enabled [ 0.003579] hpet clockevent registered [ 0.003584] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.003591] Calibrating delay loop (skipped), value calculated using timer frequency.. 5306.01 BogoMIPS (lpj=10612020) [ 0.003611] Security Framework initialized [ 0.003618] SELinux: Disabled at boot. [ 0.003627] Mount-cache hash table entries: 512 [ 0.003778] Initializing cgroup subsys ns [ 0.003782] Initializing cgroup subsys cpuacct [ 0.003787] Initializing cgroup subsys memory [ 0.003795] Initializing cgroup subsys freezer [ 0.003798] Initializing cgroup subsys net_cls [ 0.003815] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003818] CPU: L2 cache: 6144K [ 0.003822] CPU: Physical Processor ID: 0 [ 0.003824] CPU: Processor Core ID: 0 [ 0.003828] using mwait in idle threads. [ 0.003836] Performance Counters: Core2 events, Intel PMU driver. [ 0.003846] ... version: 2 [ 0.003848] ... bit width: 40 [ 0.003850] ... generic counters: 2 [ 0.003852] ... value mask: 000000ffffffffff [ 0.003854] ... max period: 000000007fffffff [ 0.003856] ... fixed-purpose counters: 3 [ 0.003858] ... counter mask: 0000000700000003 [ 0.003865] Checking 'hlt' instruction... OK. [ 0.019663] ACPI: Core revision 20090521 [ 0.033027] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072716] CPU0: Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz stepping 0a [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5306.63 BogoMIPS (lpj=10613270) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.161433] CPU1: Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz stepping 0a [ 0.161452] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164025] Brought up 2 CPUs [ 0.164029] Total of 2 processors activated (10612.64 BogoMIPS). [ 0.164098] CPU0 attaching sched-domain: [ 0.164102] domain 0: span 0-1 level MC [ 0.164105] groups: 0 1 [ 0.164112] CPU1 attaching sched-domain: [ 0.164115] domain 0: span 0-1 level MC [ 0.164118] groups: 1 0 [ 0.164209] Apple MacBookPro5 series board detected. Selecting PCI-method for reboots. [ 0.164209] Booting paravirtualized kernel on bare hardware [ 0.164229] regulator: core version 0.5 [ 0.164229] Time: 22:57:35 Date: 09/04/09 [ 0.164229] NET: Registered protocol family 16 [ 0.164229] EISA bus registered [ 0.164229] ACPI: bus type pci registered [ 0.164265] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 [ 0.164270] PCI: MCFG area at f0000000 reserved in E820 [ 0.164274] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.164276] PCI: Using MMCONFIG for extended config space [ 0.164278] PCI: Using configuration type 1 for base access [ 0.172058] bio: create slab <bio-0> at 0 [ 0.173585] ACPI: EC: EC description table is found, configuring boot EC [ 0.173762] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.184487] ACPI: BIOS _OSI(Linux) query ignored [ 0.185284] ACPI: Interpreter enabled [ 0.185292] ACPI: (supports S0 S3 S4 S5) [ 0.185319] ACPI: Using IOAPIC for interrupt routing [ 0.212987] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62 [ 0.212987] ACPI: EC: driver started in interrupt mode [ 0.212987] ACPI: No dock devices found. [ 0.212987] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.212987] pci 0000:00:03.0: reg 10 io port: [0x4000-0x40ff] [ 0.216007] pci 0000:00:03.2: reg 10 io port: [0x4180-0x41bf] [ 0.216024] pci 0000:00:03.2: reg 20 io port: [0x4140-0x417f] [ 0.216031] pci 0000:00:03.2: reg 24 io port: [0x4100-0x413f] [ 0.216058] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.216065] pci 0000:00:03.2: PME# disabled [ 0.216245] pci 0000:00:03.5: reg 10 32bit mmio: [0xdf500000-0xdf57ffff] [ 0.216346] pci 0000:00:04.0: reg 10 32bit mmio: [0xdf588000-0xdf588fff] [ 0.216383] pci 0000:00:04.0: supports D1 D2 [ 0.216386] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216391] pci 0000:00:04.0: PME# disabled [ 0.216425] pci 0000:00:04.1: reg 10 32bit mmio: [0xdf589200-0xdf5892ff] [ 0.216469] pci 0000:00:04.1: supports D1 D2 [ 0.216471] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216476] pci 0000:00:04.1: PME# disabled [ 0.216515] pci 0000:00:06.0: reg 10 32bit mmio: [0xdf587000-0xdf587fff] [ 0.216552] pci 0000:00:06.0: supports D1 D2 [ 0.216555] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216559] pci 0000:00:06.0: PME# disabled [ 0.216594] pci 0000:00:06.1: reg 10 32bit mmio: [0xdf589100-0xdf5891ff] [ 0.216637] pci 0000:00:06.1: supports D1 D2 [ 0.216640] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216644] pci 0000:00:06.1: PME# disabled [ 0.216684] pci 0000:00:08.0: reg 10 32bit mmio: [0xdf580000-0xdf583fff] [ 0.216721] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.216726] pci 0000:00:08.0: PME# disabled [ 0.216800] pci 0000:00:0a.0: reg 10 32bit mmio: [0xdf586000-0xdf586fff] [ 0.216806] pci 0000:00:0a.0: reg 14 io port: [0x41e0-0x41e7] [ 0.216813] pci 0000:00:0a.0: reg 18 32bit mmio: [0xdf589000-0xdf5890ff] [ 0.216819] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xdf589300-0xdf58930f] [ 0.216848] pci 0000:00:0a.0: supports D1 D2 [ 0.216851] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216857] pci 0000:00:0a.0: PME# disabled [ 0.216892] pci 0000:00:0b.0: reg 10 io port: [0x41d8-0x41df] [ 0.216898] pci 0000:00:0b.0: reg 14 io port: [0x41ec-0x41ef] [ 0.216904] pci 0000:00:0b.0: reg 18 io port: [0x41d0-0x41d7] [ 0.216910] pci 0000:00:0b.0: reg 1c io port: [0x41e8-0x41eb] [ 0.216916] pci 0000:00:0b.0: reg 20 io port: [0x41c0-0x41cf] [ 0.216922] pci 0000:00:0b.0: reg 24 32bit mmio: [0xdf584000-0xdf585fff] [ 0.217149] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217158] pci 0000:00:0c.0: PME# disabled [ 0.217404] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217413] pci 0000:00:15.0: PME# disabled [ 0.217647] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217656] pci 0000:00:16.0: PME# disabled [ 0.217890] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217899] pci 0000:00:17.0: PME# disabled [ 0.217996] pci 0000:00:09.0: transparent bridge [ 0.218002] pci 0000:00:09.0: bridge 32bit mmio: [0xdf400000-0xdf4fffff] [ 0.218064] pci 0000:02:00.0: reg 10 32bit mmio: [0xd4000000-0xd4ffffff] [ 0.218083] pci 0000:02:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff] [ 0.218101] pci 0000:02:00.0: reg 1c 64bit mmio: [0xd2000000-0xd3ffffff] [ 0.218115] pci 0000:02:00.0: reg 24 io port: [0x3000-0x307f] [ 0.218129] pci 0000:02:00.0: reg 30 32bit mmio: [0xd5000000-0xd507ffff] [ 0.218240] pci 0000:00:0c.0: bridge io port: [0x3000-0x3fff] [ 0.218249] pci 0000:00:0c.0: bridge 32bit mmio: [0xd2000000-0xd50fffff] [ 0.218265] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.218488] pci 0000:04:00.0: reg 10 64bit mmio: [0xdf300000-0xdf303fff] [ 0.218555] pci 0000:04:00.0: supports D1 D2 [ 0.218558] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.218563] pci 0000:04:00.0: PME# disabled [ 0.218649] pci 0000:00:15.0: bridge 32bit mmio: [0xdf300000-0xdf3fffff] [ 0.218740] pci 0000:05:00.0: reg 10 64bit mmio: [0xdf200000-0xdf200fff] [ 0.218805] pci 0000:05:00.0: supports D1 D2 [ 0.218808] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.218813] pci 0000:05:00.0: PME# disabled [ 0.218895] pci 0000:00:16.0: bridge 32bit mmio: [0xdf200000-0xdf2fffff] [ 0.218966] pci 0000:06:00.0: reg 10 64bit mmio: [0xdb100000-0xdb10ffff] [ 0.219099] pci 0000:00:17.0: bridge io port: [0x1000-0x1fff] [ 0.219108] pci 0000:00:17.0: bridge 32bit mmio: [0xdb100000-0xdf1fffff] [ 0.219124] pci 0000:00:17.0: bridge 64bit mmio pref: [0xd7100000-0xdb0fffff] [ 0.219182] pci_bus 0000:00: on NUMA node 0 [ 0.219189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.219884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.305557] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.305557] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.305557] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.305557] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.305579] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *11 [ 0.308063] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.308391] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.308718] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.309044] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.309370] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.309694] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.310020] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.310345] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.310671] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.310997] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.311323] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.311649] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10 [ 0.311974] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.312317] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.312643] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.312969] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *7 [ 0.313295] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.313621] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.313947] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.314273] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *5 [ 0.314598] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.314924] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.315250] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.315576] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.315903] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.316246] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.316573] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.316899] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15 [ 0.317225] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11 [ 0.317549] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10 [ 0.317876] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14 [ 0.318198] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15 [ 0.318526] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.318851] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.319176] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11 [ 0.319504] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.319832] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7 [ 0.320177] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5 [ 0.320507] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14 [ 0.320608] SCSI subsystem initialized [ 0.320608] libata version 3.00 loaded. [ 0.320608] usbcore: registered new interface driver usbfs [ 0.320608] usbcore: registered new interface driver hub [ 0.320608] usbcore: registered new device driver usb [ 0.320608] ACPI: WMI: Mapper loaded [ 0.320608] PCI: Using ACPI for IRQ routing [ 0.336031] Bluetooth: Core ver 2.15 [ 0.336048] NET: Registered protocol family 31 [ 0.336048] Bluetooth: HCI device and connection manager initialized [ 0.336048] Bluetooth: HCI socket layer initialized [ 0.336048] NetLabel: Initializing [ 0.336048] NetLabel: domain hash size = 128 [ 0.336048] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.336048] NetLabel: unlabeled traffic allowed by default [ 0.336059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.336059] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.360012] pnp: PnP ACPI init [ 0.360022] ACPI: bus type pnp registered [ 0.373921] pnp: PnP ACPI: found 9 devices [ 0.373924] ACPI: ACPI bus type pnp unregistered [ 0.373928] PnPBIOS: Disabled by ACPI PNP [ 0.373941] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.373950] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.373958] system 00:06: ioport range 0x400-0x47f has been reserved [ 0.373962] system 00:06: ioport range 0x480-0x4ff has been reserved [ 0.373965] system 00:06: ioport range 0x500-0x57f has been reserved [ 0.373969] system 00:06: ioport range 0x580-0x5ff has been reserved [ 0.373972] system 00:06: ioport range 0x800-0x87f has been reserved [ 0.373976] system 00:06: ioport range 0x880-0x8ff has been reserved [ 0.373980] system 00:06: ioport range 0x4140-0x417f has been reserved [ 0.373984] system 00:06: ioport range 0x4100-0x413f has been reserved [ 0.373988] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.373992] system 00:06: ioport range 0x295-0x296 has been reserved [ 0.409138] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.409142] pci 0000:00:09.0: IO window: disabled [ 0.409147] pci 0000:00:09.0: MEM window: 0xdf400000-0xdf4fffff [ 0.409152] pci 0000:00:09.0: PREFETCH window: disabled [ 0.409156] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02 [ 0.409162] pci 0000:00:0c.0: IO window: 0x3000-0x3fff [ 0.409174] pci 0000:00:0c.0: MEM window: 0xd2000000-0xd50fffff [ 0.409183] pci 0000:00:0c.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff [ 0.409198] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04 [ 0.409200] pci 0000:00:15.0: IO window: disabled [ 0.409212] pci 0000:00:15.0: MEM window: 0xdf300000-0xdf3fffff [ 0.409220] pci 0000:00:15.0: PREFETCH window: disabled [ 0.409229] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05 [ 0.409231] pci 0000:00:16.0: IO window: disabled [ 0.409242] pci 0000:00:16.0: MEM window: 0xdf200000-0xdf2fffff [ 0.409251] pci 0000:00:16.0: PREFETCH window: disabled [ 0.409259] pci 0000:00:17.0: PCI bridge, secondary bus 0000:06 [ 0.409265] pci 0000:00:17.0: IO window: 0x1000-0x1fff [ 0.409277] pci 0000:00:17.0: MEM window: 0xdb100000-0xdf1fffff [ 0.409285] pci 0000:00:17.0: PREFETCH window: 0x000000d7100000-0x000000db0fffff [ 0.409302] pci 0000:00:09.0: enabling device (0000 -> 0002) [ 0.409309] pci 0000:00:09.0: setting latency timer to 64 [ 0.409789] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 23 [ 0.409793] alloc irq_desc for 23 on node -1 [ 0.409796] alloc kstat_irqs on node -1 [ 0.409802] pci 0000:00:0c.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23 [ 0.409812] pci 0000:00:0c.0: setting latency timer to 64 [ 0.410280] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 22 [ 0.410284] alloc irq_desc for 22 on node -1 [ 0.410286] alloc kstat_irqs on node -1 [ 0.410291] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22 [ 0.410301] pci 0000:00:15.0: setting latency timer to 64 [ 0.410775] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 21 [ 0.410779] alloc irq_desc for 21 on node -1 [ 0.410781] alloc kstat_irqs on node -1 [ 0.410787] pci 0000:00:16.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21 [ 0.410797] pci 0000:00:16.0: setting latency timer to 64 [ 0.411261] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 20 [ 0.411265] alloc irq_desc for 20 on node -1 [ 0.411267] alloc kstat_irqs on node -1 [ 0.411273] pci 0000:00:17.0: PCI INT A -> Link[Z00N] -> GSI 20 (level, low) -> IRQ 20 [ 0.411282] pci 0000:00:17.0: setting latency timer to 64 [ 0.411289] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.411293] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.411296] pci_bus 0000:01: resource 1 mem: [0xdf400000-0xdf4fffff] [ 0.411299] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.411303] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.411306] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.411309] pci_bus 0000:02: resource 1 mem: [0xd2000000-0xd50fffff] [ 0.411313] pci_bus 0000:02: resource 2 pref mem [0xb0000000-0xbfffffff] [ 0.411316] pci_bus 0000:04: resource 1 mem: [0xdf300000-0xdf3fffff] [ 0.411320] pci_bus 0000:05: resource 1 mem: [0xdf200000-0xdf2fffff] [ 0.411323] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff] [ 0.411326] pci_bus 0000:06: resource 1 mem: [0xdb100000-0xdf1fffff] [ 0.411329] pci_bus 0000:06: resource 2 pref mem [0xd7100000-0xdb0fffff] [ 0.411367] NET: Registered protocol family 2 [ 0.411480] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.411831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.412241] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.412437] TCP: Hash tables configured (established 131072 bind 65536) [ 0.412440] TCP reno registered [ 0.412512] NET: Registered protocol family 1 [ 0.412566] Trying to unpack rootfs image as initramfs... [ 0.501501] Switched to high resolution mode on CPU 1 [ 0.504025] Switched to high resolution mode on CPU 0 [ 0.679985] Freeing initrd memory: 7757k freed [ 0.683970] cpufreq-nforce2: No nForce2 chipset. [ 0.684111] Scanning for low memory corruption every 60 seconds [ 0.684413] audit: initializing netlink socket (disabled) [ 0.684430] type=2000 audit(1252105054.681:1): initialized [ 0.697978] highmem bounce pool size: 64 pages [ 0.697985] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.701527] VFS: Disk quotas dquot_6.5.2 [ 0.701641] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.702730] fuse init (API version 7.12) [ 0.702938] msgmni has been set to 1686 [ 0.703217] alg: No test for stdrng (krng) [ 0.703230] io scheduler noop registered [ 0.703232] io scheduler anticipatory registered [ 0.703235] io scheduler deadline registered [ 0.703325] io scheduler cfq registered (default) [ 0.720232] pci 0000:02:00.0: Boot video device [ 0.720585] alloc irq_desc for 24 on node -1 [ 0.720588] alloc kstat_irqs on node -1 [ 0.720610] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X [ 0.720633] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.721043] alloc irq_desc for 25 on node -1 [ 0.721046] alloc kstat_irqs on node -1 [ 0.721064] pcieport-driver 0000:00:15.0: irq 25 for MSI/MSI-X [ 0.721086] pcieport-driver 0000:00:15.0: setting latency timer to 64 [ 0.721494] alloc irq_desc for 26 on node -1 [ 0.721496] alloc kstat_irqs on node -1 [ 0.721515] pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X [ 0.721537] pcieport-driver 0000:00:16.0: setting latency timer to 64 [ 0.721942] alloc irq_desc for 27 on node -1 [ 0.721944] alloc kstat_irqs on node -1 [ 0.721963] pcieport-driver 0000:00:17.0: irq 27 for MSI/MSI-X [ 0.721985] pcieport-driver 0000:00:17.0: setting latency timer to 64 [ 0.722255] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.722375] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.722735] ACPI: AC Adapter [ADP1] (off-line) [ 0.722907] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.722911] ACPI: Power Button [PWRF] [ 0.723008] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.723082] ACPI: Lid Switch [LID0] [ 0.723174] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.723177] ACPI: Power Button [PWRB] [ 0.723268] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 0.723272] ACPI: Sleep Button [SLPB] [ 0.724440] ACPI: SSDT afec9c18 0027A (v01 APPLE Cpu0Ist 00003000 INTL 20061109) [ 0.725016] ACPI: SSDT afec9918 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) [ 0.725603] Monitor-Mwait will be used to enter C-1 state [ 0.725632] Monitor-Mwait will be used to enter C-2 state [ 0.725658] Monitor-Mwait will be used to enter C-3 state [ 0.725665] Marking TSC unstable due to TSC halts in idle [ 0.725720] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.725783] processor LNXCPU:00: registered as cooling_device0 [ 0.725788] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.726219] ACPI: SSDT afec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) [ 0.726710] ACPI: SSDT afec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) [ 0.727490] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.727553] processor LNXCPU:01: registered as cooling_device1 [ 0.727558] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.741730] isapnp: Scanning for PnP cards... [ 1.096593] isapnp: No Plug & Play device found [ 1.105120] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.108720] brd: module loaded [ 1.111691] loop: module loaded [ 1.111901] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.112672] ahci 0000:00:0b.0: version 3.0 [ 1.113145] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 19 [ 1.113150] alloc irq_desc for 19 on node -1 [ 1.113153] alloc kstat_irqs on node -1 [ 1.113160] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19 [ 1.113193] alloc irq_desc for 28 on node -1 [ 1.113195] alloc kstat_irqs on node -1 [ 1.113203] ahci 0000:00:0b.0: irq 28 for MSI/MSI-X [ 1.113265] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode [ 1.113269] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part [ 1.113274] ahci 0000:00:0b.0: setting latency timer to 64 [ 1.113414] scsi0 : ahci [ 1.113635] scsi1 : ahci [ 1.113775] scsi2 : ahci [ 1.113916] scsi3 : ahci [ 1.114166] scsi4 : ahci [ 1.114573] scsi5 : ahci [ 1.114956] ata1: SATA max UDMA/133 abar m8192@0xdf584000 port 0xdf584100 irq 28 [ 1.114960] ata2: SATA max UDMA/133 abar m8192@0xdf584000 port 0xdf584180 irq 28 [ 1.114963] ata3: DUMMY [ 1.114965] ata4: DUMMY [ 1.114967] ata5: DUMMY [ 1.114969] ata6: DUMMY [ 1.118597] Fixed MDIO Bus: probed [ 1.118605] PPP generic driver version 2.4.2 [ 1.118973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.119467] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 18 [ 1.119471] alloc irq_desc for 18 on node -1 [ 1.119474] alloc kstat_irqs on node -1 [ 1.119480] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 18 (level, low) -> IRQ 18 [ 1.119495] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1.119500] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.119575] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 1.119603] ehci_hcd 0000:00:04.1: debug port 1 [ 1.119608] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 1.119625] ehci_hcd 0000:00:04.1: irq 18, io mem 0xdf589200 [ 1.129013] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 1.129138] usb usb1: configuration #1 chosen from 1 choice [ 1.129207] hub 1-0:1.0: USB hub found [ 1.129216] hub 1-0:1.0: 7 ports detected [ 1.129739] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 17 [ 1.129743] alloc irq_desc for 17 on node -1 [ 1.129746] alloc kstat_irqs on node -1 [ 1.129752] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 17 (level, low) -> IRQ 17 [ 1.129762] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 1.129766] ehci_hcd 0000:00:06.1: EHCI Host Controller [ 1.129841] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2 [ 1.129876] ehci_hcd 0000:00:06.1: debug port 1 [ 1.129882] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported [ 1.129898] ehci_hcd 0000:00:06.1: irq 17, io mem 0xdf589100 [ 1.141050] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 1.141162] usb usb2: configuration #1 chosen from 1 choice [ 1.141231] hub 2-0:1.0: USB hub found [ 1.141238] hub 2-0:1.0: 5 ports detected [ 1.141335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.141819] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 16 [ 1.141822] alloc irq_desc for 16 on node -1 [ 1.141825] alloc kstat_irqs on node -1 [ 1.141831] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 16 (level, low) -> IRQ 16 [ 1.141841] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.141845] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.141922] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 [ 1.141948] ohci_hcd 0000:00:04.0: irq 16, io mem 0xdf588000 [ 1.198123] usb usb3: configuration #1 chosen from 1 choice [ 1.198190] hub 3-0:1.0: USB hub found [ 1.198202] hub 3-0:1.0: 7 ports detected [ 1.198738] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 23 [ 1.198744] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 23 (level, low) -> IRQ 23 [ 1.198754] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 1.198757] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 1.198833] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4 [ 1.198855] ohci_hcd 0000:00:06.0: irq 23, io mem 0xdf587000 [ 1.255107] usb usb4: configuration #1 chosen from 1 choice [ 1.255177] hub 4-0:1.0: USB hub found [ 1.255186] hub 4-0:1.0: 5 ports detected [ 1.255283] uhci_hcd: USB Universal Host Controller Interface driver [ 1.255915] PNP: No PS/2 controller found. Probing ports directly. [ 1.256812] i8042.c: No controller found. [ 1.257149] mice: PS/2 mouse device common for all mice [ 1.257891] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.257958] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.258178] device-mapper: uevent: version 1.0.3 [ 1.258337] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.258450] device-mapper: multipath: version 1.1.0 loaded [ 1.258453] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.258717] EISA: Probing bus 0 at eisa.0 [ 1.258724] Cannot allocate resource for EISA slot 1 [ 1.258730] Cannot allocate resource for EISA slot 3 [ 1.258732] Cannot allocate resource for EISA slot 4 [ 1.258752] EISA: Detected 0 cards. [ 1.259372] cpuidle: using governor ladder [ 1.260326] cpuidle: using governor menu [ 1.261271] TCP cubic registered [ 1.261989] NET: Registered protocol family 10 [ 1.262539] lo: Disabled Privacy Extensions [ 1.262969] NET: Registered protocol family 17 [ 1.263027] Bluetooth: L2CAP ver 2.13 [ 1.263030] Bluetooth: L2CAP socket layer initialized [ 1.263033] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.263035] Bluetooth: SCO socket layer initialized [ 1.263162] Bluetooth: RFCOMM TTY layer initialized [ 1.263165] Bluetooth: RFCOMM socket layer initialized [ 1.263168] Bluetooth: RFCOMM ver 1.11 [ 1.264201] Using IPI No-Shortcut mode [ 1.264309] PM: Resume from disk failed. [ 1.264318] registered taskstats version 1 [ 1.264403] Magic number: 9:96:1007 [ 1.264407] input input4: hash matches [ 1.264497] rtc_cmos 00:07: setting system clock to 2009-09-04 22:57:36 UTC (1252105056) [ 1.264500] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.264501] EDD information not available. [ 1.274720] ACPI: Battery Slot [BAT0] (battery present) [ 1.285104] CE: hpet increasing min_delta_ns to 15000 nsec [ 1.440118] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 1.500088] Clocksource tsc unstable (delta = -195840640 ns) [ 1.580222] usb 1-4: configuration #1 chosen from 1 choice [ 1.597114] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.597127] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.598894] ata1.00: ATA-8: Hitachi HTS543232L9SA02, FB4AC52F, max UDMA/133 [ 1.598898] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.599449] ata2.00: ATAPI: MATSHITADVD-R UJ-868, KA19, max UDMA/66, ATAPI AN [ 1.600164] ata1.00: configured for UDMA/133 [ 1.601914] ata2.00: configured for UDMA/66 [ 1.616184] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4A PQ: 0 ANSI: 5 [ 1.616447] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.616481] sd 0:0:0:0: [sda] Write Protect is off [ 1.616483] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.616486] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.616504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.616593] sda: [ 1.618064] scsi 1:0:0:0: CD-ROM MATSHITA DVD-R UJ-868 KA19 PQ: 0 ANSI: 5 [ 1.621804] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.621807] Uniform CD-ROM driver Revision: 3.20 [ 1.622074] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.622201] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.668111] sda1 sda2 sda3 sda4 [ 1.668673] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.668697] Freeing unused kernel memory: 564k freed [ 1.668977] Write protecting the kernel text: 4520k [ 1.669019] Write protecting the kernel read-only data: 1876k [ 1.827736] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.828125] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.828130] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.828136] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.893329] b43-pci-bridge 0000:04:00.0: power state changed by ACPI to D0 [ 1.893498] b43-pci-bridge 0000:04:00.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22 [ 1.893507] b43-pci-bridge 0000:04:00.0: setting latency timer to 64 [ 1.894798] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:4b:bb:e7:6c [ 1.894801] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3 [ 1.899659] ohci1394 0000:05:00.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21 [ 1.899687] ohci1394 0000:05:00.0: setting latency timer to 64 [ 1.932228] ssb: ERROR: PLL init unknown for device 4322 [ 1.932380] ssb: ERROR: PMU resource config unknown for device 4322 [ 1.954099] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[df200000-df2007ff] Max Packet=[4096] IR/IT contexts=[8/8] [ 1.964554] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0 [ 2.212015] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 2.466100] PM: Starting manual resume from disk [ 2.466102] PM: Resume from partition 8:4 [ 2.466104] PM: Checking hibernation image. [ 2.466228] PM: Resume from disk failed. [ 2.483330] kjournald starting. Commit interval 5 seconds [ 2.483328] EXT3-fs: mounted filesystem with writeback data mode. [ 2.533085] usb 4-1: configuration #1 chosen from 1 choice [ 2.536045] hub 4-1:1.0: USB hub found [ 2.539016] hub 4-1:1.0: 3 ports detected [ 2.944010] usb 3-5: new low speed USB device using ohci_hcd and address 2 [ 3.160170] usb 3-5: configuration #1 chosen from 1 choice [ 3.237229] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00254bfffebbe76c] [ 3.468102] usb 3-6: new full speed USB device using ohci_hcd and address 3 [ 3.692175] usb 3-6: configuration #1 chosen from 1 choice [ 3.782109] usb 4-1.1: new full speed USB device using ohci_hcd and address 3 [ 3.906174] usb 4-1.1: configuration #1 chosen from 1 choice [ 3.986110] usb 4-1.2: new full speed USB device using ohci_hcd and address 4 [ 4.097152] usb 4-1.2: configuration #1 chosen from 1 choice [ 4.178105] usb 4-1.3: new full speed USB device using ohci_hcd and address 5 [ 4.289154] usb 4-1.3: configuration #1 chosen from 1 choice [ 8.372594] udev: starting version 141 [ 8.900349] usbcore: registered new interface driver hiddev [ 8.905227] input: HID 05ac:820a as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input5 [ 8.905282] generic-usb 0003:05AC:820A.0004: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-1.2/input0 [ 8.910184] input: HID 05ac:820b as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input6 [ 8.910238] generic-usb 0003:05AC:820B.0005: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-1.3/input0 [ 8.910251] usbcore: registered new interface driver usbhid [ 8.910253] usbhid: v2.6:USB HID core driver [ 9.001058] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 9.001149] usbcore: registered new interface driver btusb [ 9.057936] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.071150] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4140 [ 9.071165] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4100 [ 9.237848] input: bcm5974 as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.2/input/input8 [ 9.237904] usbcore: registered new interface driver bcm5974 [ 9.276136] cfg80211: Calling CRDA to update world regulatory domain [ 9.311186] apple 0003:05AC:8242.0001: hiddev96,hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5/input0 [ 9.317541] input: Apple, Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input9 [ 9.317587] apple 0003:05AC:0236.0002: input,hidraw3: USB HID v1.11 Keyboard [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input0 [ 9.328088] apple 0003:05AC:0236.0003: hidraw4: USB HID v1.11 Device [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input1 [ 9.447439] Linux video capture interface: v2.00 [ 9.583351] cfg80211: World regulatory domain updated: [ 9.583353] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.583356] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.583358] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.583360] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.583362] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.583364] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.602413] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8507) [ 9.607281] input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input10 [ 9.607346] usbcore: registered new interface driver uvcvideo [ 9.607350] USB Video Class driver (v0.1.0) [ 9.804595] b43-phy0: Broadcom 4322 WLAN found (core revision 16) [ 9.848260] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 8, Type 4, Revision 4) [ 9.848276] b43: probe of ssb0:0 failed with error -95 [ 9.848291] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 9.993284] lp: driver loaded but no devices found [ 10.069723] applesmc: Apple MacBook Pro 5 detected: [ 10.069726] applesmc: - Model with accelerometer [ 10.069727] applesmc: - Model with light sensors and backlight [ 10.069729] applesmc: - Model with 20 temperature sensors [ 10.124817] applesmc: device successfully initialized (0xe0, 0x00). [ 10.124819] applesmc: device successfully initialized. [ 10.125738] applesmc: 2 fans found. [ 10.128029] input: applesmc as /devices/platform/applesmc.768/input/input11 [ 10.128132] Registered led device: smc::kbd_backlight [ 10.128145] applesmc: driver successfully loaded. [ 10.155301] ath5k 0000:06:00.0: PCI INT A -> GSI 0 (level, low) -> IRQ 0 [ 10.155310] ath5k 0000:06:00.0: setting latency timer to 64 [ 10.155334] ath5k 0000:06:00.0: registered as 'phy1' [ 10.155336] ath5k phy1: request_irq failed [ 10.155344] ath5k 0000:06:00.0: PCI INT A disabled [ 10.155348] ath5k: probe of 0000:06:00.0 failed with error -16 [ 10.235729] Adding 1389208k swap on /dev/sda4. Priority:-1 extents:1 across:1389208k [ 10.258433] EXT3 FS on sda3, internal journal [ 28.032037] CE: hpet increasing min_delta_ns to 22500 nsec [ 35.230229] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.230234] Bluetooth: BNEP filters: protocol multicast [ 35.270897] Bridge firewalling registered [ 35.306044] usb 4-1.2: USB disconnect, address 4 [ 35.471284] usb 4-1.3: USB disconnect, address 5 [ 35.660820] input: Mouseemu virtual keyboard as /devices/virtual/input/input12 [ 35.661468] input: Mouseemu virtual mouse as /devices/virtual/input/input13 [ 36.046374] ppdev: user-space parallel port driver [ 39.768423] alloc irq_desc for 29 on node -1 [ 39.768426] alloc kstat_irqs on node -1 [ 39.768437] forcedeth 0000:00:0a.0: irq 29 for MSI/MSI-X [ 39.768646] eth0: no link during initialization. [ 39.769096] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 53.418914] mtrr: base(0xd3000000) is not aligned on a size(0xe00000) boundary [ 112.069571] mtrr: base(0xd3000000) is not aligned on a size(0xe00000) boundary [ 119.114062] mtrr: no MTRR for d3000000,e00000 found [ 124.850096] mtrr: base(0xd3000000) is not aligned on a size(0xe00000) boundary [ 140.687403] glxinfo[4922]: segfault at 0 ip 0804ad46 sp bfc68320 error 4 in glxinfo[8048000+5000] [ 140.749547] glxinfo[4925]: segfault at 0 ip 0804ad46 sp bfc73270 error 4 in glxinfo[8048000+5000] [ 607.038635] ath5k 0000:06:00.0: PCI INT A -> GSI 0 (level, low) -> IRQ 0 [ 607.038651] ath5k 0000:06:00.0: setting latency timer to 64 [ 607.038695] ath5k 0000:06:00.0: registered as 'phy2' [ 607.038699] ath5k phy2: request_irq failed [ 607.038712] ath5k 0000:06:00.0: PCI INT A disabled [ 607.038720] ath5k: probe of 0000:06:00.0 failed with error -16 Look at the bug and related question at http://bugs.launchpad.net/ubuntu/+bug/423515, since I have more information there.
After re-reading my description above, I think I left one piece of information unclear. The Ubuntu Live CD and the BackTrack 4 CD were both tried and successful on ANOTHER computer other than the MacBook.
I reassigned this to acpi/bios. Dunno if that's 100% correct but I trust the ACPI people will be able to route it more appropriately if needed, thanks.
From the log it seems that the incorrect interrupt is obtained from ath5k 0000:06:00.0 device. Maybe it is related with the broken BIOS. Will you please attach the output of acpidump, lspci -vxxx ? Will you please add the following boot options and attach the output of dmesg? a. noapic b. pci=noacpi Thanks.
Created attachment 23069 [details] acpidump Output from acpidump
Created attachment 23070 [details] lspci Output from lspci -vxxx
Created attachment 23071 [details] noapic dmesg Dmesg when booted with noapic
Created attachment 23072 [details] pci=noacpi dmesg Dmesg when booted with pci=noacpi
Sorry, I just noticed that the dmesg output is junk. Ill try and get that replaced immediatly
Created attachment 23074 [details] Corrected noapic
Trying to run dmesg when using pci=noacpi freezes the machine, so I was unable to post that
Will you please add the following boot option and see whether the issue still exists? acpi_osi="Darwin" thanks.
Hi, Nick From the acpidump info it seems that this issue is related with the broken BIOS. When no boot option of "acpi_osi=Darwin" is added, it will return the incorrect _PRT entry for 06:00.0 PCI device. > Return (Package (0x01) { Package (0x04) { 0x00, 0x00, 0x00, 0x00 } }) In such case it can't get the correct IRQ number for the 06:0.0 device. So please add the boot option of "acpi_osi=Darwin" and see whether the issue still exists. As this is related with the BIOS, the bug will be rejected. Thanks.
Thank you, adding the option acpi_osi="Darwin" works, although I don't know why hotpluging isn't working. Thank you guys for all your help.