I can't get the following card working on an Acer Aspire One Netbook Model ZG8 and Ubuntu 9.04 Netbook Remix. 02:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) Subsystem: Foxconn International, Inc. Device e00d Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at 54100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k_pci Kernel modules: ath_pci, ath5k It's unfortunate because if I can't get it to work, I'll have to return the computer to Costco. It's the type of Acer Aspire One Netbooks they sell at the Cdll Phone Kiosk which is different from the standard Acer Aspire One 10" netbooks
You seem to use proprietary madwifi blob (report to madwifi). Please try ath5k. If the problem persists with that driver, append whole dmesg output after unsuccessfull attempt to connect. And describe more thoroughly what exactly doesn't work. Do you manage to see APs in scan results? Are you able to connect, but you see no traffic flow. Do you use encryption, etc.
I click on the wireless and see no wireless networks at all. Normally I see 4 or more using Ubuntu on a different Laptop. I do have passphrase encryption on my wireless router. Here is a link to a screen shot of the wireless tool and the hardware driver window along with the dmesg text: http://joelinux.net/Bug_13611-AR242x/ Acer Netbook: http://joelinux.net/Bug_13611-AR242x/AR242x-notworking.png HP CQ60: http://joelinux.net/Bug_13611-AR242x/NormalWireless.png dmesg: http://joelinux.net/Bug_13611-AR242x/dmesg.txt fffff [ 0.722549] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.722555] pci 0000:00:1c.3: IO window: 0x1000-0x1fff [ 0.722565] pci 0000:00:1c.3: MEM window: 0x53000000-0x540fffff [ 0.722573] pci 0000:00:1c.3: PREFETCH window: 0x00000052000000-0x00000052ffffff [ 0.722584] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.722588] pci 0000:00:1e.0: IO window: disabled [ 0.722597] pci 0000:00:1e.0: MEM window: disabled [ 0.722604] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.722631] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.722641] pci 0000:00:1c.0: setting latency timer to 64 [ 0.722656] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.722665] pci 0000:00:1c.2: setting latency timer to 64 [ 0.722679] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.722687] pci 0000:00:1c.3: setting latency timer to 64 [ 0.722699] pci 0000:00:1e.0: setting latency timer to 64 [ 0.722707] bus: 00 index 0 io port: [0x00-0xffff] [ 0.722712] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.722717] bus: 01 index 0 io port: [0x3000-0x4fff] [ 0.722722] bus: 01 index 1 mmio: [0x55200000-0x562fffff] [ 0.722726] bus: 01 index 2 mmio: [0x50000000-0x50ffffff] [ 0.722731] bus: 01 index 3 mmio: [0x0-0x0] [ 0.722735] bus: 02 index 0 io port: [0x2000-0x2fff] [ 0.722740] bus: 02 index 1 mmio: [0x54100000-0x551fffff] [ 0.722745] bus: 02 index 2 mmio: [0x51000000-0x51ffffff] [ 0.722749] bus: 02 index 3 mmio: [0x0-0x0] [ 0.722754] bus: 03 index 0 io port: [0x1000-0x1fff] [ 0.722758] bus: 03 index 1 mmio: [0x53000000-0x540fffff] [ 0.722763] bus: 03 index 2 mmio: [0x52000000-0x52ffffff] [ 0.722767] bus: 03 index 3 mmio: [0x0-0x0] [ 0.722772] bus: 04 index 0 mmio: [0x0-0x0] [ 0.722776] bus: 04 index 1 mmio: [0x0-0x0] [ 0.722780] bus: 04 index 2 mmio: [0x0-0x0] [ 0.722784] bus: 04 index 3 io port: [0x00-0xffff] [ 0.722788] bus: 04 index 4 mmio: [0x000000-0xffffffff] [ 0.722810] NET: Registered protocol family 2 [ 0.736123] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.736637] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.737504] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.737957] TCP: Hash tables configured (established 131072 bind 65536) [ 0.737963] TCP reno registered [ 0.744186] NET: Registered protocol family 1 [ 0.744411] checking if image is initramfs... it is [ 1.716911] Freeing initrd memory: 7377k freed [ 1.716990] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 1.716996] Simple Boot Flag at 0x44 set to 0x1 [ 1.717334] cpufreq: No nForce2 chipset. [ 1.717602] audit: initializing netlink socket (disabled) [ 1.717641] type=2000 audit(1245849359.716:1): initialized [ 1.727141] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 1.732119] highmem bounce pool size: 64 pages [ 1.732131] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.734956] VFS: Disk quotas dquot_6.5.1 [ 1.735081] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.736419] fuse init (API version 7.10) [ 1.736607] msgmni has been set to 1724 [ 1.736967] alg: No test for stdrng (krng) [ 1.736999] io scheduler noop registered [ 1.737015] io scheduler anticipatory registered [ 1.737019] io scheduler deadline registered [ 1.737060] io scheduler cfq registered (default) [ 1.737083] pci 0000:00:02.0: Boot video device [ 1.737677] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.737691] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.737706] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 1.739197] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.739209] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.740579] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.740639] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.740685] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X [ 1.740705] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.740738] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.740765] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.740861] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.740917] pcieport-driver 0000:00:1c.2: found MSI capability [ 1.740958] pcieport-driver 0000:00:1c.2: irq 2302 for MSI/MSI-X [ 1.740978] pci_express 0000:00:1c.2:pcie00: allocate port service [ 1.741022] pci_express 0000:00:1c.2:pcie02: allocate port service [ 1.741051] pci_express 0000:00:1c.2:pcie03: allocate port service [ 1.741146] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.741202] pcieport-driver 0000:00:1c.3: found MSI capability [ 1.741242] pcieport-driver 0000:00:1c.3: irq 2301 for MSI/MSI-X [ 1.741262] pci_express 0000:00:1c.3:pcie00: allocate port service [ 1.741295] pci_express 0000:00:1c.3:pcie02: allocate port service [ 1.741322] pci_express 0000:00:1c.3:pcie03: allocate port service [ 1.741441] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.741624] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.741637] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.741925] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.741938] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.742220] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.742233] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.742369] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.743334] ACPI: AC Adapter [ACAD] (on-line) [ 1.761630] ACPI: Battery Slot [BAT1] (battery present) [ 1.761787] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.761794] ACPI: Power Button (FF) [PWRF] [ 1.761886] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.761892] ACPI: Power Button (CM) [PWRB] [ 1.761988] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.763397] ACPI: Lid Switch [LID0] [ 1.763501] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 1.763507] ACPI: Sleep Button (CM) [SLPB] [ 1.764612] ACPI: SSDT 3F380C90, 0239 (r2 PmRef Cpu0Ist 3000 INTL 20051117) [ 1.765337] ACPI: SSDT 3F37FE10, 01C7 (r2 PmRef Cpu0Cst 3001 INTL 20051117) [ 1.766868] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.766919] processor ACPI_CPU:00: registered as cooling_device0 [ 1.766928] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.767616] ACPI: SSDT 3F380F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117) [ 1.768316] ACPI: SSDT 3F37EF10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117) [ 1.770076] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.770131] processor ACPI_CPU:01: registered as cooling_device1 [ 1.770142] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.773875] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.775547] ACPI: Thermal Zone [THRM] (46 C) [ 1.775646] isapnp: Scanning for PnP cards... [ 2.129484] isapnp: No Plug & Play device found [ 2.144533] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.146455] brd: module loaded [ 2.147117] loop: module loaded [ 2.147293] Fixed MDIO Bus: probed [ 2.147305] PPP generic driver version 2.4.2 [ 2.147432] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 2.147497] Driver 'sd' needs updating - please use bus_type methods [ 2.147518] Driver 'sr' needs updating - please use bus_type methods [ 2.147602] ahci 0000:00:1f.2: version 3.0 [ 2.147636] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.147721] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X [ 2.147825] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode [ 2.147833] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part [ 2.147842] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.148231] scsi0 : ahci [ 2.148474] scsi1 : ahci [ 2.148606] scsi2 : ahci [ 2.148742] scsi3 : ahci [ 2.149066] ata1: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444100 irq 2300 [ 2.149072] ata2: DUMMY [ 2.149077] ata3: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444200 irq 2300 [ 2.149082] ata4: DUMMY [ 2.468040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.469250] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.514751] ata1.00: ATA-8: TOSHIBA MK1652GSX, LV020J, max UDMA/100 [ 2.514757] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.515997] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.516182] ata1.00: configured for UDMA/100 [ 2.852034] ata3: SATA link down (SStatus 0 SControl 300) [ 2.868225] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1652GS LV02 PQ: 0 ANSI: 5 [ 2.868441] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.868485] sd 0:0:0:0: [sda] Write Protect is off [ 2.868491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.868563] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.868703] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.868743] sd 0:0:0:0: [sda] Write Protect is off [ 2.868749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.868818] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.868827] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 2.985132] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.985241] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.985355] ata_piix 0000:00:1f.1: version 2.12 [ 2.985377] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.985435] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.985593] scsi4 : ata_piix [ 2.985752] scsi5 : ata_piix [ 2.986850] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14 [ 2.986856] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15 [ 3.140163] ata6: port disabled. ignoring. [ 3.141598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.141639] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.141671] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.141678] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.141800] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.145750] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.145760] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.145788] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56444400 [ 3.160022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.160170] usb usb1: configuration #1 chosen from 1 choice [ 3.160232] hub 1-0:1.0: USB hub found [ 3.160250] hub 1-0:1.0: 8 ports detected [ 3.160468] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.160508] uhci_hcd: USB Universal Host Controller Interface driver [ 3.160577] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.160590] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.160596] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.160696] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.160733] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0 [ 3.160887] usb usb2: configuration #1 chosen from 1 choice [ 3.160941] hub 2-0:1.0: USB hub found [ 3.160956] hub 2-0:1.0: 2 ports detected [ 3.161128] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.161140] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.161146] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.161231] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.161279] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080 [ 3.161433] usb usb3: configuration #1 chosen from 1 choice [ 3.161487] hub 3-0:1.0: USB hub found [ 3.161501] hub 3-0:1.0: 2 ports detected [ 3.161668] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.161680] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.161687] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.161771] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.161817] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060 [ 3.161976] usb usb4: configuration #1 chosen from 1 choice [ 3.162030] hub 4-0:1.0: USB hub found [ 3.162044] hub 4-0:1.0: 2 ports detected [ 3.162213] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.162225] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.162232] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.162324] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.162373] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040 [ 3.162529] usb usb5: configuration #1 chosen from 1 choice [ 3.162582] hub 5-0:1.0: USB hub found [ 3.162596] hub 5-0:1.0: 2 ports detected [ 3.162858] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 3.169652] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.173011] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.173025] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.173032] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.173039] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.173046] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.176093] mice: PS/2 mouse device common for all mice [ 3.196129] rtc_cmos 00:03: RTC can wake from S4 [ 3.196212] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.196256] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 3.196416] device-mapper: uevent: version 1.0.3 [ 3.196621] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.196804] device-mapper: multipath: version 1.0.5 loaded [ 3.196810] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.197015] EISA: Probing bus 0 at eisa.0 [ 3.197030] Cannot allocate resource for EISA slot 1 [ 3.197035] Cannot allocate resource for EISA slot 2 [ 3.197040] Cannot allocate resource for EISA slot 3 [ 3.197044] Cannot allocate resource for EISA slot 4 [ 3.197049] Cannot allocate resource for EISA slot 5 [ 3.197070] EISA: Detected 0 cards. [ 3.197330] cpuidle: using governor ladder [ 3.197563] cpuidle: using governor menu [ 3.198655] TCP cubic registered [ 3.198886] NET: Registered protocol family 10 [ 3.199698] lo: Disabled Privacy Extensions [ 3.200360] NET: Registered protocol family 17 [ 3.200403] Bluetooth: L2CAP ver 2.11 [ 3.200407] Bluetooth: L2CAP socket layer initialized [ 3.200413] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.200416] Bluetooth: SCO socket layer initialized [ 3.200525] Marking TSC unstable due to TSC halts in idle [ 3.200545] Bluetooth: RFCOMM socket layer initialized [ 3.200558] Bluetooth: RFCOMM TTY layer initialized [ 3.200562] Bluetooth: RFCOMM ver 1.10 [ 3.202459] Using IPI No-Shortcut mode [ 3.202638] registered taskstats version 1 [ 3.202858] Magic number: 13:899:281 [ 3.202899] tty tty18: hash matches [ 3.203000] rtc_cmos 00:03: setting system clock to 2009-06-24 13:16:02 UTC (1245849362) [ 3.203009] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.203014] EDD information not available. [ 3.203462] Freeing unused kernel memory: 532k freed [ 3.203765] Write protecting the kernel text: 4112k [ 3.203873] Write protecting the kernel read-only data: 1524k [ 3.216381] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 3.473071] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 3.648412] ATL1E 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.648444] ATL1E 0000:01:00.0: setting latency timer to 64 [ 3.655151] usb 1-1: configuration #1 chosen from 1 choice [ 4.120171] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 4.302116] usb 2-2: configuration #1 chosen from 1 choice [ 4.327819] usbcore: registered new interface driver hiddev [ 4.343481] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6 [ 4.344200] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0 [ 4.358134] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1 [ 4.358171] usbcore: registered new interface driver usbhid [ 4.358178] usbhid: v2.6:USB HID core driver [ 4.508677] PM: Starting manual resume from disk [ 4.508686] PM: Resume from partition 8:7 [ 4.508689] PM: Checking hibernation image. [ 4.508967] PM: Resume from disk failed. [ 4.556672] kjournald starting. Commit interval 5 seconds [ 4.556694] EXT3-fs: mounted filesystem with ordered data mode. [ 9.589001] udev: starting version 141 [ 9.772095] Linux agpgart interface v0.103 [ 9.804724] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 9.805201] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 9.808346] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 9.901970] cfg80211: Calling CRDA to update world regulatory domain [ 9.915316] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/input/input7 [ 9.948439] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no) [ 9.999106] intel_rng: FWH not detected [ 10.121332] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 10.174418] ath5k_pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.174443] ath5k_pci 0000:02:00.0: setting latency timer to 64 [ 10.174592] ath5k_pci 0000:02:00.0: registered as 'phy0' [ 10.198776] iTCO_vendor_support: vendor-support=0 [ 10.202938] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 10.203275] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460) [ 10.203460] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.224194] phy0: Selected rate control algorithm 'pid' [ 10.272420] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 10.274298] Linux video capture interface: v2.00 [ 10.340910] uvcvideo: Found UVC 1.00 device WebCam (064e:a102) [ 10.342975] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input9 [ 10.356501] usbcore: registered new interface driver uvcvideo [ 10.356609] USB Video Class driver (v0.1.0) [ 10.446938] acer-wmi: Acer Laptop ACPI-WMI Extras [ 10.448711] acer-wmi: software RFKILL enabled [ 10.459382] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 10.460922] ath_hal: module license 'Proprietary' taints kernel. [ 10.469198] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 10.509428] wlan: 0.9.4 [ 10.541529] ath_pci: 0.9.4 [ 10.878072] cfg80211: World regulatory domain updated: [ 10.878081] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.878088] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.878093] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.878099] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.878104] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.878110] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.879427] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.879625] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.909942] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 11.190294] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 11.234910] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10 [ 11.380705] lp: driver loaded but no devices found [ 11.541438] Adding 2313320k swap on /dev/sda7. Priority:-1 extents:1 across:2313320k [ 12.121063] EXT3 FS on sda5, internal journal [ 14.017881] kjournald starting. Commit interval 5 seconds [ 14.018275] EXT3 FS on sda6, internal journal [ 14.018292] EXT3-fs: mounted filesystem with ordered data mode. [ 14.494600] type=1505 audit(1245870973.789:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2105 [ 14.494876] type=1505 audit(1245870973.789:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2105 [ 14.494987] type=1505 audit(1245870973.789:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2105 [ 14.495092] type=1505 audit(1245870973.789:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2105 [ 14.813177] type=1505 audit(1245870974.109:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2110 [ 14.813592] type=1505 audit(1245870974.109:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2110 [ 14.878326] type=1505 audit(1245870974.173:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2114 [ 18.152687] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.152696] Bluetooth: BNEP filters: protocol multicast [ 18.176980] Bridge firewalling registered [ 19.578648] ppdev: user-space parallel port driver [ 20.873373] [drm] Initialized drm 1.1.0 20060810 [ 20.896351] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.896366] pci 0000:00:02.0: setting latency timer to 64 [ 20.896813] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 20.902957] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 20.903036] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 21.917533] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 23.706515] ATL1E 0000:01:00.0: irq 2299 for MSI/MSI-X [ 23.707214] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.737072] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 952.000155] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 952.134682] usb 1-5: configuration #1 chosen from 1 choice [ 952.228073] Initializing USB Mass Storage driver... [ 952.228867] scsi6 : SCSI emulation for USB Mass Storage devices [ 952.230498] usbcore: registered new interface driver usb-storage [ 952.230521] USB Mass Storage support registered. [ 952.230850] usb-storage: device found at 4 [ 952.230862] usb-storage: waiting for device to settle before scanning [ 957.228575] usb-storage: device scan complete [ 957.229360] scsi 6:0:0:0: Direct-Access WD 5000BEV External 1.75 PQ: 0 ANSI: 4 [ 957.236410] sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 957.237208] sd 6:0:0:0: [sdb] Write Protect is off [ 957.237227] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 957.237241] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 957.238330] sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 957.238943] sd 6:0:0:0: [sdb] Write Protect is off [ 957.238960] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 957.238974] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 957.238998] sdb: sdb1 [ 957.277952] sd 6:0:0:0: [sdb] Attached SCSI disk [ 957.278284] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 957.981318] kjournald starting. Commit interval 5 seconds [ 957.981358] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 957.982943] EXT3 FS on sdb1, internal journal [ 957.982956] EXT3-fs: recovery complete. [ 957.983559] EXT3-fs: mounted filesystem with ordered data mode. [ 1012.956985] usb 1-5: USB disconnect, address 4 [ 1012.959866] Buffer I/O error on device sdb1, logical block 120832 [ 1012.959887] lost page write due to I/O error on sdb1 [ 1012.959913] Buffer I/O error on device sdb1, logical block 120833 [ 1012.959926] lost page write due to I/O error on sdb1 [ 1012.959945] Buffer I/O error on device sdb1, logical block 120834 [ 1012.959958] lost page write due to I/O error on sdb1 [ 1012.959976] Buffer I/O error on device sdb1, logical block 120835 [ 1012.959990] lost page write due to I/O error on sdb1 [ 1012.960006] Buffer I/O error on device sdb1, logical block 120836 [ 1012.960019] lost page write due to I/O error on sdb1 [ 1012.960035] Buffer I/O error on device sdb1, logical block 120837 [ 1012.960047] lost page write due to I/O error on sdb1 [ 1012.960063] Buffer I/O error on device sdb1, logical block 120838 [ 1012.960077] lost page write due to I/O error on sdb1 [ 1012.960093] Buffer I/O error on device sdb1, logical block 120839 [ 1012.960106] lost page write due to I/O error on sdb1 [ 1012.960122] Buffer I/O error on device sdb1, logical block 120840 [ 1012.960135] lost page write due to I/O error on sdb1 [ 1012.960152] Buffer I/O error on device sdb1, logical block 120841 [ 1012.960166] lost page write due to I/O error on sdb1 [ 1012.961490] ext3_journal_dirty_data: aborting transaction: IO failure in ext3_journal_dirty_data [ 1012.961517] EXT3-fs error (device sdb1) in ext3_ordered_writepage: IO failure [ 1012.963379] JBD: Detected IO errors while flushing file data on sdb1 [ 1012.963612] Aborting journal on device sdb1. [ 1012.971022] JBD: Detected IO errors while flushing file data on sdb1 [ 1012.971067] journal commit I/O error [ 1012.971732] ext3_abort called. [ 1012.971747] EXT3-fs error (device sdb1): ext3_journal_start_sb: Detected aborted journal [ 1012.971767] Remounting filesystem read-only [ 1013.096846] ext3_abort called. [ 1013.096866] EXT3-fs error (device sdb1): ext3_put_super: Couldn't clean up the journal [ 1029.120260] usb 2-2: USB disconnect, address 2 [ 1104.028084] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 1104.162393] usb 1-5: configuration #1 chosen from 1 choice [ 1104.198315] scsi7 : SCSI emulation for USB Mass Storage devices [ 1104.198969] usb-storage: device found at 5 [ 1104.198976] usb-storage: waiting for device to settle before scanning [ 1109.197634] usb-storage: device scan complete [ 1109.198379] scsi 7:0:0:0: Direct-Access WD 5000BEV External 1.75 PQ: 0 ANSI: 4 [ 1109.203098] sd 7:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 1109.203721] sd 7:0:0:0: [sdb] Write Protect is off [ 1109.203738] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1109.203749] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 1109.208850] sd 7:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 1109.209462] sd 7:0:0:0: [sdb] Write Protect is off [ 1109.209480] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1109.209494] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 1109.209519] sdb: sdb1 [ 1109.255244] sd 7:0:0:0: [sdb] Attached SCSI disk [ 1109.255578] sd 7:0:0:0: Attached scsi generic sg1 type 0 [ 1110.000487] kjournald starting. Commit interval 5 seconds [ 1110.000523] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 1110.001582] EXT3 FS on sdb1, internal journal [ 1110.001596] EXT3-fs: recovery complete. [ 1110.002198] EXT3-fs: mounted filesystem with ordered data mode. [ 1125.584104] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 1125.765461] usb 2-2: configuration #1 chosen from 1 choice [ 1125.798717] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input11 [ 1125.836878] generic-usb 0003:046D:C51B.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0 [ 1125.854569] generic-usb 0003:046D:C51B.0004: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1 jl@jl-acer:~$ ~
There are some instructions on how to get it to work on various websites. I'm going to try that this afternoon, but the problem is this computer may be used for long periods of time by another member of the family that is not familiar with Linux, particularly the terminal. If I can't get it working easily, I will have to return the computer. I know the normal Acer 10" netbook works okay out of the box. I like this particular computer because it was thiner, lighter, had a nicer touchpad, and better layout of the USB ports. However this wireless problem is looking like a deal breaker as I don't use the anti-competitive monopoly OS.
I tried to update my system using the Ubuntu instructions found here: http://ubuntumanual.org/posts/185/install-atheros-ar242x-802-11abg-wireless-driver-in-ubuntu Everything went well except for the fact that it still doesn't work. After this attempt, I was forced to log into Windows which I was never going to use just to check if the card works in Windows, which it does. However since I don't want to use Windows, I need to find a solution in Linux or return the computer.
I just learned that the computer that works has the same AR242x card as the one that doesn't. The one that works is a Compaq Presario CQ60, and the one that doesn't is an Acer Aspire One ZG8 netbook.
Here's a new dmesg.txt which I captured after I put ath5k in /etc/modules and commented out #ath_pci From what I get out of it, it assumes the commputer is out of range, put I've had the computer right next to the router and it doesn't work. I know that the standard Acer Aspire One does work, but I don't know what kinnd of card it had. What's different about the Acer Aspire One ZG8 is that it also has a wireless broadband card. I wonder if that is causing some sort of conflict? But as I said, the AR242x does work with the anti-competitive monopoly OS. [ 0.654896] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.654904] pci 0000:00:1d.7: PME# disabled [ 0.655078] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.655086] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.655129] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.655141] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.655152] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.655163] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.655174] pci 0000:00:1f.1: reg 20 io port: [0x50c0-0x50cf] [ 0.655245] pci 0000:00:1f.2: reg 10 io port: [0x50d8-0x50df] [ 0.655256] pci 0000:00:1f.2: reg 14 io port: [0x50fc-0x50ff] [ 0.655267] pci 0000:00:1f.2: reg 18 io port: [0x50d0-0x50d7] [ 0.655279] pci 0000:00:1f.2: reg 1c io port: [0x50f8-0x50fb] [ 0.655290] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x502f] [ 0.655302] pci 0000:00:1f.2: reg 24 32bit mmio: [0x56444000-0x564443ff] [ 0.655327] pci 0000:00:1f.2: PME# supported from D3hot [ 0.655334] pci 0000:00:1f.2: PME# disabled [ 0.655406] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f] [ 0.655523] pci 0000:01:00.0: reg 10 64bit mmio: [0x55200000-0x5523ffff] [ 0.655537] pci 0000:01:00.0: reg 18 io port: [0x3000-0x307f] [ 0.655593] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.655601] pci 0000:01:00.0: PME# disabled [ 0.655681] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff] [ 0.655689] pci 0000:00:1c.0: bridge 32bit mmio: [0x55200000-0x562fffff] [ 0.655701] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff] [ 0.655782] pci 0000:02:00.0: reg 10 64bit mmio: [0x54100000-0x5410ffff] [ 0.655845] pci 0000:02:00.0: supports D1 D2 [ 0.655849] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.655858] pci 0000:02:00.0: PME# disabled [ 0.655942] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff] [ 0.655950] pci 0000:00:1c.2: bridge 32bit mmio: [0x54100000-0x551fffff] [ 0.655962] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x51000000-0x51ffffff] [ 0.656046] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff] [ 0.656054] pci 0000:00:1c.3: bridge 32bit mmio: [0x53000000-0x540fffff] [ 0.656066] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x52000000-0x52ffffff] [ 0.656142] pci 0000:00:1e.0: transparent bridge [ 0.656187] bus 00 -> node 0 [ 0.656201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.656856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.657337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.657650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.657958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.663772] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.664073] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.664358] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.664635] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.664910] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.665188] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.665465] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.665740] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.666261] ACPI: WMI: Mapper loaded [ 0.666385] SCSI subsystem initialized [ 0.666385] libata version 3.00 loaded. [ 0.666385] usbcore: registered new interface driver usbfs [ 0.666385] usbcore: registered new interface driver hub [ 0.666385] usbcore: registered new device driver usb [ 0.666385] PCI: Using ACPI for IRQ routing [ 0.672021] Bluetooth: Core ver 2.13 [ 0.672061] NET: Registered protocol family 31 [ 0.672061] Bluetooth: HCI device and connection manager initialized [ 0.672061] Bluetooth: HCI socket layer initialized [ 0.672061] NET: Registered protocol family 8 [ 0.672061] NET: Registered protocol family 20 [ 0.672075] NetLabel: Initializing [ 0.672078] NetLabel: domain hash size = 128 [ 0.672082] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.672108] NetLabel: unlabeled traffic allowed by default [ 0.672139] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.672149] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.676112] AppArmor: AppArmor Filesystem Enabled [ 0.680022] Switched to high resolution mode on CPU 0 [ 0.680328] Switched to high resolution mode on CPU 1 [ 0.684027] pnp: PnP ACPI init [ 0.684051] ACPI: bus type pnp registered [ 0.687424] pnp: PnP ACPI: found 9 devices [ 0.687430] ACPI: ACPI bus type pnp unregistered [ 0.687436] PnPBIOS: Disabled by ACPI PNP [ 0.687456] system 00:01: ioport range 0x200-0x20f has been reserved [ 0.687463] system 00:01: ioport range 0x600-0x60f has been reserved [ 0.687469] system 00:01: ioport range 0x610-0x610 has been reserved [ 0.687474] system 00:01: ioport range 0x800-0x80f has been reserved [ 0.687480] system 00:01: ioport range 0x400-0x47f has been reserved [ 0.687486] system 00:01: ioport range 0x500-0x53f has been reserved [ 0.687493] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.687500] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.687507] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.687513] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.687520] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.687526] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.687532] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.722470] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.722478] pci 0000:00:1c.0: IO window: 0x3000-0x4fff [ 0.722489] pci 0000:00:1c.0: MEM window: 0x55200000-0x562fffff [ 0.722497] pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff [ 0.722509] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 [ 0.722516] pci 0000:00:1c.2: IO window: 0x2000-0x2fff [ 0.722525] pci 0000:00:1c.2: MEM window: 0x54100000-0x551fffff [ 0.722533] pci 0000:00:1c.2: PREFETCH window: 0x00000051000000-0x00000051ffffff [ 0.722544] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.722551] pci 0000:00:1c.3: IO window: 0x1000-0x1fff [ 0.722560] pci 0000:00:1c.3: MEM window: 0x53000000-0x540fffff [ 0.722568] pci 0000:00:1c.3: PREFETCH window: 0x00000052000000-0x00000052ffffff [ 0.722580] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.722584] pci 0000:00:1e.0: IO window: disabled [ 0.722592] pci 0000:00:1e.0: MEM window: disabled [ 0.722599] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.722626] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.722636] pci 0000:00:1c.0: setting latency timer to 64 [ 0.722651] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.722660] pci 0000:00:1c.2: setting latency timer to 64 [ 0.722674] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.722682] pci 0000:00:1c.3: setting latency timer to 64 [ 0.722695] pci 0000:00:1e.0: setting latency timer to 64 [ 0.722702] bus: 00 index 0 io port: [0x00-0xffff] [ 0.722707] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.722712] bus: 01 index 0 io port: [0x3000-0x4fff] [ 0.722717] bus: 01 index 1 mmio: [0x55200000-0x562fffff] [ 0.722722] bus: 01 index 2 mmio: [0x50000000-0x50ffffff] [ 0.722726] bus: 01 index 3 mmio: [0x0-0x0] [ 0.722731] bus: 02 index 0 io port: [0x2000-0x2fff] [ 0.722735] bus: 02 index 1 mmio: [0x54100000-0x551fffff] [ 0.722740] bus: 02 index 2 mmio: [0x51000000-0x51ffffff] [ 0.722744] bus: 02 index 3 mmio: [0x0-0x0] [ 0.722749] bus: 03 index 0 io port: [0x1000-0x1fff] [ 0.722753] bus: 03 index 1 mmio: [0x53000000-0x540fffff] [ 0.722758] bus: 03 index 2 mmio: [0x52000000-0x52ffffff] [ 0.722763] bus: 03 index 3 mmio: [0x0-0x0] [ 0.722767] bus: 04 index 0 mmio: [0x0-0x0] [ 0.722771] bus: 04 index 1 mmio: [0x0-0x0] [ 0.722775] bus: 04 index 2 mmio: [0x0-0x0] [ 0.722779] bus: 04 index 3 io port: [0x00-0xffff] [ 0.722783] bus: 04 index 4 mmio: [0x000000-0xffffffff] [ 0.722804] NET: Registered protocol family 2 [ 0.736125] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.736640] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.737483] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.737930] TCP: Hash tables configured (established 131072 bind 65536) [ 0.737937] TCP reno registered [ 0.744187] NET: Registered protocol family 1 [ 0.744406] checking if image is initramfs... it is [ 1.716780] Freeing initrd memory: 7377k freed [ 1.716860] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 1.716866] Simple Boot Flag at 0x44 set to 0x1 [ 1.717213] cpufreq: No nForce2 chipset. [ 1.717482] audit: initializing netlink socket (disabled) [ 1.717519] type=2000 audit(1245912209.716:1): initialized [ 1.731893] highmem bounce pool size: 64 pages [ 1.731906] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.734730] VFS: Disk quotas dquot_6.5.1 [ 1.734854] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.736194] fuse init (API version 7.10) [ 1.736378] msgmni has been set to 1724 [ 1.736738] alg: No test for stdrng (krng) [ 1.736770] io scheduler noop registered [ 1.736775] io scheduler anticipatory registered [ 1.736779] io scheduler deadline registered [ 1.736819] io scheduler cfq registered (default) [ 1.736841] pci 0000:00:02.0: Boot video device [ 1.737436] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.737450] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.737465] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 1.738962] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.738975] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.740342] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.740401] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.740446] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X [ 1.740466] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.740500] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.740527] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.740623] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.740678] pcieport-driver 0000:00:1c.2: found MSI capability [ 1.740718] pcieport-driver 0000:00:1c.2: irq 2302 for MSI/MSI-X [ 1.740738] pci_express 0000:00:1c.2:pcie00: allocate port service [ 1.740765] pci_express 0000:00:1c.2:pcie02: allocate port service [ 1.740792] pci_express 0000:00:1c.2:pcie03: allocate port service [ 1.740886] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.740941] pcieport-driver 0000:00:1c.3: found MSI capability [ 1.740980] pcieport-driver 0000:00:1c.3: irq 2301 for MSI/MSI-X [ 1.741014] pci_express 0000:00:1c.3:pcie00: allocate port service [ 1.741049] pci_express 0000:00:1c.3:pcie02: allocate port service [ 1.741077] pci_express 0000:00:1c.3:pcie03: allocate port service [ 1.741195] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.741378] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.741391] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.741683] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.741696] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.741978] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.741991] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15d20), AE_ALREADY_EXISTS [ 1.742126] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.742393] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 1.742866] ACPI: AC Adapter [ACAD] (on-line) [ 1.743035] ACPI: Battery Slot [BAT1] (battery absent) [ 1.743187] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.743193] ACPI: Power Button (FF) [PWRF] [ 1.743284] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.743290] ACPI: Power Button (CM) [PWRB] [ 1.743379] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.743837] ACPI: Lid Switch [LID0] [ 1.743939] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 1.743946] ACPI: Sleep Button (CM) [SLPB] [ 1.745059] ACPI: SSDT 3F380C90, 0239 (r2 PmRef Cpu0Ist 3000 INTL 20051117) [ 1.745776] ACPI: SSDT 3F37FE10, 01C7 (r2 PmRef Cpu0Cst 3001 INTL 20051117) [ 1.747303] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.747359] processor ACPI_CPU:00: registered as cooling_device0 [ 1.747368] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.748067] ACPI: SSDT 3F380F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117) [ 1.748754] ACPI: SSDT 3F37EF10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117) [ 1.750419] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.750463] processor ACPI_CPU:01: registered as cooling_device1 [ 1.750471] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.754733] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.758837] ACPI: Thermal Zone [THRM] (44 C) [ 1.758938] isapnp: Scanning for PnP cards... [ 2.112798] isapnp: No Plug & Play device found [ 2.128538] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.130454] brd: module loaded [ 2.131112] loop: module loaded [ 2.131290] Fixed MDIO Bus: probed [ 2.131302] PPP generic driver version 2.4.2 [ 2.131433] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 2.131497] Driver 'sd' needs updating - please use bus_type methods [ 2.131518] Driver 'sr' needs updating - please use bus_type methods [ 2.131602] ahci 0000:00:1f.2: version 3.0 [ 2.131634] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.131718] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X [ 2.131822] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode [ 2.131830] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part [ 2.131840] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.132228] scsi0 : ahci [ 2.132464] scsi1 : ahci [ 2.132613] scsi2 : ahci [ 2.132746] scsi3 : ahci [ 2.133062] ata1: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444100 irq 2300 [ 2.133067] ata2: DUMMY [ 2.133072] ata3: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444200 irq 2300 [ 2.133077] ata4: DUMMY [ 2.452038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.452955] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.520057] ata1.00: ATA-8: TOSHIBA MK1652GSX, LV020J, max UDMA/100 [ 2.520064] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.521304] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.521490] ata1.00: configured for UDMA/100 [ 2.856032] ata3: SATA link down (SStatus 0 SControl 300) [ 2.872222] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1652GS LV02 PQ: 0 ANSI: 5 [ 2.872439] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.872484] sd 0:0:0:0: [sda] Write Protect is off [ 2.872490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.872560] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.872701] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.872742] sd 0:0:0:0: [sda] Write Protect is off [ 2.872747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.872816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.872825] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 3.023729] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.023839] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.023949] ata_piix 0000:00:1f.1: version 2.12 [ 3.023969] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.024064] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 3.024211] scsi4 : ata_piix [ 3.024357] scsi5 : ata_piix [ 3.025478] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14 [ 3.025485] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15 [ 3.180143] ata6: port disabled. ignoring. [ 3.181566] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.181606] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.181640] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.181646] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.181773] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.185720] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.185731] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.185760] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56444400 [ 3.200023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.200172] usb usb1: configuration #1 chosen from 1 choice [ 3.200228] hub 1-0:1.0: USB hub found [ 3.200244] hub 1-0:1.0: 8 ports detected [ 3.200468] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.200508] uhci_hcd: USB Universal Host Controller Interface driver [ 3.200577] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.200590] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.200597] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.200687] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.200723] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0 [ 3.200881] usb usb2: configuration #1 chosen from 1 choice [ 3.200935] hub 2-0:1.0: USB hub found [ 3.200950] hub 2-0:1.0: 2 ports detected [ 3.201111] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.201128] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.201135] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.201225] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.201273] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080 [ 3.201425] usb usb3: configuration #1 chosen from 1 choice [ 3.201479] hub 3-0:1.0: USB hub found [ 3.201493] hub 3-0:1.0: 2 ports detected [ 3.201660] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.201672] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.201678] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.201762] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.201809] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060 [ 3.201962] usb usb4: configuration #1 chosen from 1 choice [ 3.202021] hub 4-0:1.0: USB hub found [ 3.202035] hub 4-0:1.0: 2 ports detected [ 3.202201] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.202218] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.202225] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.202315] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.202365] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040 [ 3.202527] usb usb5: configuration #1 chosen from 1 choice [ 3.202581] hub 5-0:1.0: USB hub found [ 3.202595] hub 5-0:1.0: 2 ports detected [ 3.202857] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 3.209983] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.213342] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.213355] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.213362] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.213369] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.213376] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.216089] mice: PS/2 mouse device common for all mice [ 3.236132] rtc_cmos 00:03: RTC can wake from S4 [ 3.236215] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.236259] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 3.236410] device-mapper: uevent: version 1.0.3 [ 3.236619] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.236798] device-mapper: multipath: version 1.0.5 loaded [ 3.236805] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.237006] EISA: Probing bus 0 at eisa.0 [ 3.237021] Cannot allocate resource for EISA slot 1 [ 3.237027] Cannot allocate resource for EISA slot 2 [ 3.237032] Cannot allocate resource for EISA slot 3 [ 3.237036] Cannot allocate resource for EISA slot 4 [ 3.237041] Cannot allocate resource for EISA slot 5 [ 3.237062] EISA: Detected 0 cards. [ 3.237324] cpuidle: using governor ladder [ 3.237553] cpuidle: using governor menu [ 3.238642] TCP cubic registered [ 3.238875] NET: Registered protocol family 10 [ 3.239696] lo: Disabled Privacy Extensions [ 3.240357] NET: Registered protocol family 17 [ 3.240400] Bluetooth: L2CAP ver 2.11 [ 3.240404] Bluetooth: L2CAP socket layer initialized [ 3.240409] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.240413] Bluetooth: SCO socket layer initialized [ 3.240518] Marking TSC unstable due to TSC halts in idle [ 3.240540] Bluetooth: RFCOMM socket layer initialized [ 3.240553] Bluetooth: RFCOMM TTY layer initialized [ 3.240557] Bluetooth: RFCOMM ver 1.10 [ 3.242462] Using IPI No-Shortcut mode [ 3.242631] registered taskstats version 1 [ 3.242855] Magic number: 13:197:722 [ 3.242881] block loop2: hash matches [ 3.242997] rtc_cmos 00:03: setting system clock to 2009-06-25 06:43:31 UTC (1245912211) [ 3.243006] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.243011] EDD information not available. [ 3.243468] Freeing unused kernel memory: 532k freed [ 3.243768] Write protecting the kernel text: 4112k [ 3.243875] Write protecting the kernel read-only data: 1524k [ 3.256217] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 3.513045] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 3.705483] usb 1-1: configuration #1 chosen from 1 choice [ 3.800041] ATL1E 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.800073] ATL1E 0000:01:00.0: setting latency timer to 64 [ 4.613198] PM: Starting manual resume from disk [ 4.613207] PM: Resume from partition 8:7 [ 4.613210] PM: Checking hibernation image. [ 4.613474] PM: Resume from disk failed. [ 4.661933] kjournald starting. Commit interval 5 seconds [ 4.661955] EXT3-fs: mounted filesystem with ordered data mode. [ 9.705412] udev: starting version 141 [ 9.914248] Linux agpgart interface v0.103 [ 9.943027] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 9.943499] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 9.948558] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 10.037651] intel_rng: FWH not detected [ 10.041218] cfg80211: Calling CRDA to update world regulatory domain [ 10.061874] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/input/input6 [ 10.100223] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no) [ 10.179491] Linux video capture interface: v2.00 [ 10.203900] iTCO_vendor_support: vendor-support=0 [ 10.208414] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 10.208830] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460) [ 10.209146] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.268082] uvcvideo: Found UVC 1.00 device WebCam (064e:a102) [ 10.270428] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input7 [ 10.288288] usbcore: registered new interface driver uvcvideo [ 10.288300] USB Video Class driver (v0.1.0) [ 10.321467] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 10.405929] acer-wmi: Acer Laptop ACPI-WMI Extras [ 10.407221] acer-wmi: software RFKILL enabled [ 10.471533] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 10.538027] ath5k_pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.538053] ath5k_pci 0000:02:00.0: setting latency timer to 64 [ 10.538225] ath5k_pci 0000:02:00.0: registered as 'phy0' [ 10.588897] phy0: Selected rate control algorithm 'pid' [ 10.678538] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 10.760305] ath_hal: module license 'Proprietary' taints kernel. [ 10.766436] AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417) [ 10.983212] cfg80211: World regulatory domain updated: [ 10.983225] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.983235] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.983243] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.983252] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.983260] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.983268] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.385205] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 11.404342] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.404482] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.436583] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9 [ 11.438808] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 11.730572] lp: driver loaded but no devices found [ 11.895132] Adding 2313320k swap on /dev/sda7. Priority:-1 extents:1 across:2313320k [ 12.485709] EXT3 FS on sda5, internal journal [ 63.735825] kjournald starting. Commit interval 5 seconds [ 63.736120] EXT3 FS on sda6, internal journal [ 63.736137] EXT3-fs: mounted filesystem with ordered data mode. [ 64.237479] type=1505 audit(1245933872.493:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2412 [ 64.237752] type=1505 audit(1245933872.493:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2412 [ 64.237863] type=1505 audit(1245933872.493:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2412 [ 64.237963] type=1505 audit(1245933872.493:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2412 [ 64.555455] type=1505 audit(1245933872.809:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2417 [ 64.555870] type=1505 audit(1245933872.809:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2417 [ 64.620112] type=1505 audit(1245933872.877:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2421 [ 68.483645] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 68.483654] Bluetooth: BNEP filters: protocol multicast [ 68.509400] Bridge firewalling registered [ 70.187437] ppdev: user-space parallel port driver [ 71.401378] [drm] Initialized drm 1.1.0 20060810 [ 71.435896] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 71.435908] pci 0000:00:02.0: setting latency timer to 64 [ 71.436290] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 71.444396] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 71.444469] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 72.492615] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 73.745139] ATL1E 0000:01:00.0: irq 2299 for MSI/MSI-X [ 73.745869] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 73.776589] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 75.659833] wlan0: authenticate with AP 00:22:3f:15:01:e1 [ 75.662193] wlan0: authenticated [ 75.662207] wlan0: associate with AP 00:22:3f:15:01:e1 [ 75.664480] wlan0: RX AssocResp from 00:22:3f:15:01:e1 (capab=0x421 status=0 aid=2) [ 75.664489] wlan0: associated [ 75.666636] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 85.744082] wlan0: no IPv6 routers present [ 439.672107] wlan0: No ProbeResp from current AP 00:22:3f:15:01:e1 - assume out of range jl@jl-acer:~$
(In reply to comment #6) > [ 73.776589] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 75.659833] wlan0: authenticate with AP 00:22:3f:15:01:e1 > [ 75.662193] wlan0: authenticated > [ 75.662207] wlan0: associate with AP 00:22:3f:15:01:e1 > [ 75.664480] wlan0: RX AssocResp from 00:22:3f:15:01:e1 (capab=0x421 > status=0 > aid=2) > [ 75.664489] wlan0: associated > [ 75.666636] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 85.744082] wlan0: no IPv6 routers present > [ 439.672107] wlan0: No ProbeResp from current AP 00:22:3f:15:01:e1 - assume > out of range This means you were associated for 6 minutes, then the card stopped receiving beacons (for whatever reason) from the AP. Was you able to use the connection for those 6 mins?
And also could you try upgrading to 2.6.30?
As far as I know it never worked. Are there any commands i could run that would shed more light on the situation? On Sun, Jun 28, 2009 at 8:07 AM, <bugzilla-daemon@bugzilla.kernel.org>wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=13611 > > > > > > --- Comment #7 from Jiri Slaby <jirislaby@gmail.com> 2009-06-28 14:07:03 > --- > (In reply to comment #6) > > [ 73.776589] ADDRCONF(NETDEV_UP): wlan0: link is not ready > > [ 75.659833] wlan0: authenticate with AP 00:22:3f:15:01:e1 > > [ 75.662193] wlan0: authenticated > > [ 75.662207] wlan0: associate with AP 00:22:3f:15:01:e1 > > [ 75.664480] wlan0: RX AssocResp from 00:22:3f:15:01:e1 (capab=0x421 > status=0 > > aid=2) > > [ 75.664489] wlan0: associated > > [ 75.666636] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > > [ 85.744082] wlan0: no IPv6 routers present > > [ 439.672107] wlan0: No ProbeResp from current AP 00:22:3f:15:01:e1 - > assume > > out of range > > This means you were associated for 6 minutes, then the card stopped > receiving > beacons (for whatever reason) from the AP. > > Was you able to use the connection for those 6 mins? > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug. > You reported the bug. >
I'll try the newer kernel. I'm not sure how to upgrade the kernel in Ubuntu On Sun, Jun 28, 2009 at 8:14 AM, <bugzilla-daemon@bugzilla.kernel.org>wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=13611 > > > > > > --- Comment #8 from Jiri Slaby <jirislaby@gmail.com> 2009-06-28 14:14:06 > --- > And also could you try upgrading to 2.6.30? > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug. > You reported the bug. >
I don't know how to upgrade to the 2.6.30 kernel On Sun, Jun 28, 2009 at 8:14 AM, <bugzilla-daemon@bugzilla.kernel.org>wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=13611 > > > > > > --- Comment #8 from Jiri Slaby <jirislaby@gmail.com> 2009-06-28 14:14:06 > --- > And also could you try upgrading to 2.6.30? > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug. > You reported the bug. >
(In reply to comment #11) > I don't know how to upgrade to the 2.6.30 kernel Me neither, but I saw 2.6.30 in ubuntu repos, so I suppose there is a way. At last you can upgrade manually...
I installed the 2.6.30 kernel, but the wireless still doesn't work. It looks like I will have to return the computer to the Costco. It's too bad because in my opinion, this is the nicest 10" Acer Netbook on the market today. Appended is another dmesg if that might help: jl@jl-acer:~$ sudo lshw -C network; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; dmesg | grep ound; dmesg | grep b43; iwconfig [sudo] password for jl: *-network description: Ethernet interface product: L1e Gigabit Ethernet Adapter vendor: Attansic Technology Corp. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: b0 serial: 00:23:8b:b8:f4:b4 size: 100MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI duplex=full firmware=L1e ip=192.168.0.102 latency=0 link=yes module=atl1e multicast=yes port=twisted pair speed=100MB/s *-network description: Wireless interface product: AR242x 802.11abg Wireless PCI Express Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wmaster0 version: 01 serial: 00:24:2c:22:a0:ae width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath5k latency=0 module=ath5k multicast=yes wireless=IEEE 802.11bg *-network DISABLED description: Ethernet interface physical id: 1 logical name: pan0 serial: e6:00:c9:76:ad:b2 capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: 00:15:E9:76:2D:A8 Channel:6 Frequency:2.437 GHz (Channel 6) Quality=70/70 Signal level=-39 dBm Encryption key:on ESSID:"ColumbiaPlace" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000002974fd2bd67 Extra: Last beacon: 1264ms ago IE: Unknown: 000D436F6C756D626961506C616365 IE: Unknown: 010882848B960C183048 IE: Unknown: 030106 IE: Unknown: 2A0100 IE: Unknown: 32041224606C IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: Unknown: DD0900037F01010017FF7F IE: Unknown: DD0C00037F020101BB0002A44000 pan0 Interface doesn't support scanning. auto lo iface lo inet loopback auto wlan0 iface wlan0 inet dhcp DISTRIB_ID=Ubuntu DISTRIB_RELEASE=9.04 DISTRIB_CODENAME=jaunty DISTRIB_DESCRIPTION="Ubuntu 9.04" 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1e Gigabit Ethernet Adapter [1969:1026] (rev b0) 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01) Bus 001 Device 002: ID 064e:a102 Suyin Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux jl-acer 2.6.30-020630-generic #020630 SMP Wed Jun 10 09:45:40 UTC 2009 i686 GNU/Linux [ 0.190894] ACPI: No dock devices found. [ 0.235690] pnp: PnP ACPI: found 9 devices [ 1.106537] isapnp: No Plug & Play device found [ 1.136258] hub 1-0:1.0: USB hub found [ 1.137021] hub 2-0:1.0: USB hub found [ 1.137606] hub 3-0:1.0: USB hub found [ 1.138186] hub 4-0:1.0: USB hub found [ 1.138804] hub 5-0:1.0: USB hub found [ 1.150868] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.158042] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 8.321714] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460) [ 8.664679] uvcvideo: Found UVC 1.00 device WebCam (064e:a102) [ 9.533269] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 10.236569] lp: driver loaded but no devices found lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. jl@jl-acer:~$ jl@jl-acer:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. jl@jl-acer:~$ jl@jl-acer:~$ uname -r 2.6.30-020630-generic jl@jl-acer:~$ jl@jl-acer:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 Ethernet controller: Attansic Technology Corp. L1e Gigabit Ethernet Adapter (rev b0) 02:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) jl@jl-acer:~$ [ 0.168637] NET: Registered protocol family 16 [ 0.168637] EISA bus registered [ 0.168637] ACPI: bus type pci registered [ 0.168637] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.168637] PCI: MCFG area at e0000000 reserved in E820 [ 0.168637] PCI: Using MMCONFIG for extended config space [ 0.168637] PCI: Using configuration type 1 for base access [ 0.170488] bio: create slab <bio-0> at 0 [ 0.173403] ACPI: EC: Look up EC in DSDT [ 0.180308] ACPI: BIOS _OSI(Linux) query ignored [ 0.181382] ACPI: Interpreter enabled [ 0.181392] ACPI: (supports S0 S3 S4 S5) [ 0.181440] ACPI: Using IOAPIC for interrupt routing [ 0.190348] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.190355] ACPI: EC: driver started in poll mode [ 0.190894] ACPI: No dock devices found. [ 0.191104] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.191119] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS [ 0.191135] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 0.191226] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.191367] pci 0000:00:02.0: reg 10 32bit mmio: [0x56380000-0x563fffff] [ 0.191377] pci 0000:00:02.0: reg 14 io port: [0x50f0-0x50f7] [ 0.191386] pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff] [ 0.191395] pci 0000:00:02.0: reg 1c 32bit mmio: [0x56400000-0x5643ffff] [ 0.191446] pci 0000:00:02.1: reg 10 32bit mmio: [0x56300000-0x5637ffff] [ 0.191587] pci 0000:00:1b.0: reg 10 64bit mmio: [0x56440000-0x56443fff] [ 0.191658] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.191666] pci 0000:00:1b.0: PME# disabled [ 0.191764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.191772] pci 0000:00:1c.0: PME# disabled [ 0.191874] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.191882] pci 0000:00:1c.2: PME# disabled [ 0.191981] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.191989] pci 0000:00:1c.3: PME# disabled [ 0.192079] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] [ 0.192156] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f] [ 0.192233] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f] [ 0.192309] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f] [ 0.192393] pci 0000:00:1d.7: reg 10 32bit mmio: [0x56444400-0x564447ff] [ 0.192465] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.192474] pci 0000:00:1d.7: PME# disabled [ 0.192664] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.192672] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.192687] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007) [ 0.192750] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.192762] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.192773] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.192785] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.192797] pci 0000:00:1f.1: reg 20 io port: [0x50c0-0x50cf] [ 0.192875] pci 0000:00:1f.2: reg 10 io port: [0x50d8-0x50df] [ 0.192887] pci 0000:00:1f.2: reg 14 io port: [0x50fc-0x50ff] [ 0.192898] pci 0000:00:1f.2: reg 18 io port: [0x50d0-0x50d7] [ 0.192910] pci 0000:00:1f.2: reg 1c io port: [0x50f8-0x50fb] [ 0.192922] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x502f] [ 0.192935] pci 0000:00:1f.2: reg 24 32bit mmio: [0x56444000-0x564443ff] [ 0.192979] pci 0000:00:1f.2: PME# supported from D3hot [ 0.192987] pci 0000:00:1f.2: PME# disabled [ 0.193061] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f] [ 0.193182] pci 0000:01:00.0: reg 10 64bit mmio: [0x55200000-0x5523ffff] [ 0.193198] pci 0000:01:00.0: reg 18 io port: [0x3000-0x307f] [ 0.193285] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.193294] pci 0000:01:00.0: PME# disabled [ 0.193377] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff] [ 0.193385] pci 0000:00:1c.0: bridge 32bit mmio: [0x55200000-0x562fffff] [ 0.193398] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff] [ 0.193482] pci 0000:02:00.0: reg 10 64bit mmio: [0x54100000-0x5410ffff] [ 0.193582] pci 0000:02:00.0: supports D1 D2 [ 0.193587] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193596] pci 0000:02:00.0: PME# disabled [ 0.193682] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff] [ 0.193691] pci 0000:00:1c.2: bridge 32bit mmio: [0x54100000-0x551fffff] [ 0.193703] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x51000000-0x51ffffff] [ 0.193775] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff] [ 0.193784] pci 0000:00:1c.3: bridge 32bit mmio: [0x53000000-0x540fffff] [ 0.193796] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x52000000-0x52ffffff] [ 0.193873] pci 0000:00:1e.0: transparent bridge [ 0.193917] pci_bus 0000:00: on NUMA node 0 [ 0.193932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.194310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.194600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.194787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.194968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.195341] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.195356] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS [ 0.202044] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.202343] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.202638] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.202932] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.203229] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.203522] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.203816] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.204125] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.204521] SCSI subsystem initialized [ 0.204607] libata version 3.00 loaded. [ 0.204607] usbcore: registered new interface driver usbfs [ 0.204607] usbcore: registered new interface driver hub [ 0.204607] usbcore: registered new device driver usb [ 0.204607] ACPI: WMI: Mapper loaded [ 0.204607] PCI: Using ACPI for IRQ routing [ 0.216023] Bluetooth: Core ver 2.15 [ 0.216068] NET: Registered protocol family 31 [ 0.216068] Bluetooth: HCI device and connection manager initialized [ 0.216068] Bluetooth: HCI socket layer initialized [ 0.216068] NET: Registered protocol family 8 [ 0.216068] NET: Registered protocol family 20 [ 0.216080] NetLabel: Initializing [ 0.216084] NetLabel: domain hash size = 128 [ 0.216088] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.216113] NetLabel: unlabeled traffic allowed by default [ 0.216147] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.216158] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.232020] pnp: PnP ACPI init [ 0.232045] ACPI: bus type pnp registered [ 0.235690] pnp: PnP ACPI: found 9 devices [ 0.235697] ACPI: ACPI bus type pnp unregistered [ 0.235703] PnPBIOS: Disabled by ACPI PNP [ 0.235726] system 00:01: ioport range 0x200-0x20f has been reserved [ 0.235735] system 00:01: ioport range 0x600-0x60f has been reserved [ 0.235742] system 00:01: ioport range 0x610-0x610 has been reserved [ 0.235749] system 00:01: ioport range 0x800-0x80f has been reserved [ 0.235756] system 00:01: ioport range 0x400-0x47f has been reserved [ 0.235763] system 00:01: ioport range 0x500-0x53f has been reserved [ 0.235772] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.235780] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.235787] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.235795] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.235803] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.235810] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.235818] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.270713] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.270721] pci 0000:00:1c.0: IO window: 0x3000-0x4fff [ 0.270733] pci 0000:00:1c.0: MEM window: 0x55200000-0x562fffff [ 0.270743] pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff [ 0.270755] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 [ 0.270762] pci 0000:00:1c.2: IO window: 0x2000-0x2fff [ 0.270772] pci 0000:00:1c.2: MEM window: 0x54100000-0x551fffff [ 0.270781] pci 0000:00:1c.2: PREFETCH window: 0x00000051000000-0x00000051ffffff [ 0.270793] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.270800] pci 0000:00:1c.3: IO window: 0x1000-0x1fff [ 0.270810] pci 0000:00:1c.3: MEM window: 0x53000000-0x540fffff [ 0.270819] pci 0000:00:1c.3: PREFETCH window: 0x00000052000000-0x00000052ffffff [ 0.270831] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.270836] pci 0000:00:1e.0: IO window: disabled [ 0.270845] pci 0000:00:1e.0: MEM window: disabled [ 0.270852] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.270882] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.270892] pci 0000:00:1c.0: setting latency timer to 64 [ 0.270909] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.270918] pci 0000:00:1c.2: setting latency timer to 64 [ 0.270934] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.270942] pci 0000:00:1c.3: setting latency timer to 64 [ 0.270956] pci 0000:00:1e.0: setting latency timer to 64 [ 0.270965] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.270972] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.270978] pci_bus 0000:01: resource 0 io: [0x3000-0x4fff] [ 0.270984] pci_bus 0000:01: resource 1 mem: [0x55200000-0x562fffff] [ 0.270991] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff] [ 0.270997] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.271003] pci_bus 0000:02: resource 1 mem: [0x54100000-0x551fffff] [ 0.271009] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff] [ 0.271016] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff] [ 0.271022] pci_bus 0000:03: resource 1 mem: [0x53000000-0x540fffff] [ 0.271028] pci_bus 0000:03: resource 2 pref mem [0x52000000-0x52ffffff] [ 0.271035] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.271041] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.271123] NET: Registered protocol family 2 [ 0.304150] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.304877] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.306068] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.306705] TCP: Hash tables configured (established 131072 bind 65536) [ 0.306711] TCP reno registered [ 0.316229] NET: Registered protocol family 1 [ 0.316360] Trying to unpack rootfs image as initramfs... [ 0.500389] Switched to high resolution mode on CPU 1 [ 0.504006] Switched to high resolution mode on CPU 0 [ 0.692164] Freeing initrd memory: 7392k freed [ 0.699257] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.699266] Simple Boot Flag at 0x44 set to 0x1 [ 0.699514] cpufreq-nforce2: No nForce2 chipset. [ 0.699581] Scanning for low memory corruption every 60 seconds [ 0.699818] audit: initializing netlink socket (disabled) [ 0.699846] type=2000 audit(1246556887.697:1): initialized [ 0.717898] highmem bounce pool size: 64 pages [ 0.717911] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.721008] VFS: Disk quotas dquot_6.5.2 [ 0.721154] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.722489] fuse init (API version 7.11) [ 0.722683] msgmni has been set to 1733 [ 0.723195] alg: No test for stdrng (krng) [ 0.723228] io scheduler noop registered [ 0.723233] io scheduler anticipatory registered [ 0.723238] io scheduler deadline registered [ 0.723351] io scheduler cfq registered (default) [ 0.723377] pci 0000:00:02.0: Boot video device [ 0.723832] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.723858] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.724122] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X [ 0.724146] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.724380] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X [ 0.724403] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.724596] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.724832] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.724847] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS [ 0.725189] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.725203] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS [ 0.725518] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.725532] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS [ 0.725886] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.725900] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS [ 0.726211] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.726225] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS [ 0.726537] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.726551] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS [ 0.726708] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.727153] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.740482] ACPI: AC Adapter [ACAD] (on-line) [ 0.740635] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.740642] ACPI: Power Button [PWRF] [ 0.740756] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.740762] ACPI: Power Button [PWRB] [ 0.740858] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.741336] ACPI: Lid Switch [LID0] [ 0.741442] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 0.741448] ACPI: Sleep Button [SLPB] [ 0.742651] ACPI: SSDT 3f380c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.743292] ACPI: SSDT 3f37fe10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.744807] Marking TSC unstable due to TSC halts in idle [ 0.744849] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.744907] processor ACPI_CPU:00: registered as cooling_device0 [ 0.744916] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.745636] ACPI: SSDT 3f380f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.746249] ACPI: SSDT 3f37ef10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.747915] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.747971] processor ACPI_CPU:01: registered as cooling_device1 [ 0.747980] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.752340] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.752364] ACPI: Thermal Zone [THRM] (55 C) [ 0.752504] isapnp: Scanning for PnP cards... [ 0.757218] ACPI: Battery Slot [BAT1] (battery absent) [ 1.106537] isapnp: No Plug & Play device found [ 1.109366] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.111505] brd: module loaded [ 1.112347] loop: module loaded [ 1.112542] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.112620] Driver 'sd' needs updating - please use bus_type methods [ 1.112642] Driver 'sr' needs updating - please use bus_type methods [ 1.112725] ahci 0000:00:1f.2: version 3.0 [ 1.112762] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.112831] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 1.112899] ahci: SSS flag set, parallel bus scan disabled [ 1.112947] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode [ 1.112955] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part [ 1.112965] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.113378] scsi0 : ahci [ 1.113637] scsi1 : ahci [ 1.113795] scsi2 : ahci [ 1.113947] scsi3 : ahci [ 1.114317] ata1: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444100 irq 27 [ 1.114324] ata2: DUMMY [ 1.114331] ata3: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444200 irq 27 [ 1.114336] ata4: DUMMY [ 1.114517] ata_piix 0000:00:1f.1: version 2.13 [ 1.114551] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.114630] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.114782] scsi4 : ata_piix [ 1.114946] scsi5 : ata_piix [ 1.116174] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14 [ 1.116182] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15 [ 1.117820] Fixed MDIO Bus: probed [ 1.117835] PPP generic driver version 2.4.2 [ 1.118065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.118122] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.118152] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.118161] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.118297] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.122239] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.122250] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.122281] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56444400 [ 1.136031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.136193] usb usb1: configuration #1 chosen from 1 choice [ 1.136258] hub 1-0:1.0: USB hub found [ 1.136276] hub 1-0:1.0: 8 ports detected [ 1.136510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.136553] uhci_hcd: USB Universal Host Controller Interface driver [ 1.136622] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.136637] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.136644] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.136742] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.136781] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0 [ 1.136960] usb usb2: configuration #1 chosen from 1 choice [ 1.137021] hub 2-0:1.0: USB hub found [ 1.137037] hub 2-0:1.0: 2 ports detected [ 1.137203] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.137216] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.137222] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.137316] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.137368] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080 [ 1.137545] usb usb3: configuration #1 chosen from 1 choice [ 1.137606] hub 3-0:1.0: USB hub found [ 1.137620] hub 3-0:1.0: 2 ports detected [ 1.137795] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.137807] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.137814] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.137907] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.137957] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060 [ 1.138124] usb usb4: configuration #1 chosen from 1 choice [ 1.138186] hub 4-0:1.0: USB hub found [ 1.138205] hub 4-0:1.0: 2 ports detected [ 1.138379] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.138391] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.138398] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.138496] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.138549] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040 [ 1.138741] usb usb5: configuration #1 chosen from 1 choice [ 1.138804] hub 5-0:1.0: USB hub found [ 1.138819] hub 5-0:1.0: 2 ports detected [ 1.139099] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 1.146248] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.149411] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.149426] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.149436] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.149446] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.149456] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.149619] mice: PS/2 mouse device common for all mice [ 1.149955] rtc_cmos 00:03: RTC can wake from S4 [ 1.150034] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.150079] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.150333] device-mapper: uevent: version 1.0.3 [ 1.150574] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 1.150860] device-mapper: multipath: version 1.0.5 loaded [ 1.150868] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.151107] EISA: Probing bus 0 at eisa.0 [ 1.151119] Cannot allocate resource for EISA slot 1 [ 1.151124] Cannot allocate resource for EISA slot 2 [ 1.151128] Cannot allocate resource for EISA slot 3 [ 1.151133] Cannot allocate resource for EISA slot 4 [ 1.151138] Cannot allocate resource for EISA slot 5 [ 1.151158] EISA: Detected 0 cards. [ 1.151545] cpuidle: using governor ladder [ 1.151801] cpuidle: using governor menu [ 1.153031] TCP cubic registered [ 1.153401] NET: Registered protocol family 10 [ 1.154450] lo: Disabled Privacy Extensions [ 1.155320] NET: Registered protocol family 17 [ 1.155371] Bluetooth: L2CAP ver 2.13 [ 1.155376] Bluetooth: L2CAP socket layer initialized [ 1.155382] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.155386] Bluetooth: SCO socket layer initialized [ 1.155492] Bluetooth: RFCOMM socket layer initialized [ 1.155514] Bluetooth: RFCOMM TTY layer initialized [ 1.155520] Bluetooth: RFCOMM ver 1.11 [ 1.157440] Using IPI No-Shortcut mode [ 1.157616] PM: Resume from disk failed. [ 1.157640] registered taskstats version 1 [ 1.157883] Magic number: 1:745:844 [ 1.158032] rtc_cmos 00:03: setting system clock to 2009-07-02 17:48:09 UTC (1246556889) [ 1.158042] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.158046] EDD information not available. [ 1.170299] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.432123] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.433543] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.448121] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.482098] ata1.00: ATA-8: TOSHIBA MK1652GSX, LV020J, max UDMA/100 [ 1.482114] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.483650] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.483921] ata1.00: configured for UDMA/100 [ 1.496436] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1652GS LV02 PQ: 0 ANSI: 5 [ 1.496714] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.496899] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 1.496946] sd 0:0:0:0: [sda] Write Protect is off [ 1.496954] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.497043] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.497299] sda:<4>Clocksource tsc unstable (delta = -253414489 ns) [ 1.553071] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 1.619442] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.621134] usb 1-1: configuration #1 chosen from 1 choice [ 1.816115] ata3: SATA link down (SStatus 0 SControl 300) [ 1.832365] ata6: port disabled. ignoring. [ 1.832453] Freeing unused kernel memory: 528k freed [ 1.832942] Write protecting the kernel text: 4180k [ 1.833021] Write protecting the kernel read-only data: 1664k [ 2.316569] ATL1E 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.316596] ATL1E 0000:01:00.0: setting latency timer to 64 [ 3.186540] PM: Starting manual resume from disk [ 3.186549] PM: Resume from partition 8:7 [ 3.186553] PM: Checking hibernation image. [ 3.186803] PM: Resume from disk failed. [ 3.234934] kjournald starting. Commit interval 5 seconds [ 3.234983] EXT3-fs: mounted filesystem with writeback data mode. [ 7.967233] udev: starting version 141 [ 8.153769] Linux agpgart interface v0.103 [ 8.164629] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 8.165033] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 8.168303] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 8.254001] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/input/input6 [ 8.254125] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no) [ 8.280106] intel_rng: FWH not detected [ 8.316669] iTCO_vendor_support: vendor-support=0 [ 8.321509] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 8.321714] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460) [ 8.321859] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.336223] cfg80211: Calling CRDA to update world regulatory domain [ 8.410534] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 8.622112] Linux video capture interface: v2.00 [ 8.664679] uvcvideo: Found UVC 1.00 device WebCam (064e:a102) [ 8.681606] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input8 [ 8.681800] usbcore: registered new interface driver uvcvideo [ 8.681813] USB Video Class driver (v0.1.0) [ 8.766242] acer-wmi: Acer Laptop ACPI-WMI Extras [ 8.805367] ath5k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.805393] ath5k 0000:02:00.0: setting latency timer to 64 [ 8.805478] ath5k 0000:02:00.0: registered as 'phy0' [ 9.135779] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 9.181143] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9 [ 9.400208] cfg80211: World regulatory domain updated: [ 9.400216] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.400224] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.400231] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.400237] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.400244] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.400250] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.465453] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.465530] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.531467] phy0: Selected rate control algorithm 'minstrel' [ 9.533269] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 9.640350] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 10.164609] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.236569] lp: driver loaded but no devices found [ 10.402895] Adding 2313320k swap on /dev/sda7. Priority:-1 extents:1 across:2313320k [ 10.985053] EXT3 FS on sda5, internal journal [ 12.785100] kjournald starting. Commit interval 5 seconds [ 12.785437] EXT3 FS on sda6, internal journal [ 12.785455] EXT3-fs: mounted filesystem with writeback data mode. [ 16.430061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.430071] Bluetooth: BNEP filters: protocol multicast [ 16.457354] Bridge firewalling registered [ 17.833532] ppdev: user-space parallel port driver [ 19.386959] [drm] Initialized drm 1.1.0 20060810 [ 19.427467] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.427483] pci 0000:00:02.0: setting latency timer to 64 [ 19.431870] mtrr: no more MTRRs available [ 19.431880] [drm] MTRR allocation failed. Graphics performance may suffer. [ 19.431913] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 21.659556] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X [ 21.660258] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 128.173536] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 128.174236] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 138.840070] eth0: no IPv6 routers present jl@jl-acer:~$ On Wed, Jun 24, 2009 at 8:15 AM, <bugzilla-daemon@bugzilla.kernel.org>wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=13611 > > > Jiri Slaby <jirislaby@gmail.com> changed: > > What |Removed |Added > > ---------------------------------------------------------------------------- > CC| |jirislaby@gmail.com > > > > > --- Comment #1 from Jiri Slaby <jirislaby@gmail.com> 2009-06-24 14:15:57 > --- > You seem to use proprietary madwifi blob (report to madwifi). > > Please try ath5k. If the problem persists with that driver, append whole > dmesg > output after unsuccessfull attempt to connect. And describe more thoroughly > what exactly doesn't work. Do you manage to see APs in scan results? Are > you > able to connect, but you see no traffic flow. Do you use encryption, etc. > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You reported the bug. >
There is a huge blank space before the dmesg output above. I don't know how to edit it out.
Hey, but you found a network! Is the columbiaplace the AP you try to connect to? If yes, could you stop network manager, all running wpa_supplicants, put this into /tmp/wpa: network={ ssid="ColumbiaPlace" scan_ssid=1 key_mgmt=WPA-PSK psk="your_passwd" } and run: /usr/sbin/wpa_supplicant -c /tmp/wpa -Dwext -iwlan0 -d
jl@jl-acer:~$ sudo /usr/sbin/wpa_supplicant -c /tmp/wpa -Dwext -iwlan0 -d [sudo] password for jl: sudo: /usr/sbin/wpa_supplicant: command not found jl@jl-acer:~$ Inside of the directory /tmp, I have a file named "wpa" which includes the following: network={ ssid="ColumbiaPlace" scan_ssid=1 key_mgmt=WPA-PSK psk="MyActualPassword" } The wpa_gui says: Status: Could not get status from wpa_supplicant Ubuntu System -> Administration -> Hardware Drivers sayon ths: "No proprietary drivers on this system" I will reboot and see if anything changes. But if this did work, how would I adress adhoc wireless? Plus the system needs to work through a GUI for average users. On Fri, Jul 3, 2009 at 12:49 AM, <bugzilla-daemon@bugzilla.kernel.org>wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=13611 > > > > > > --- Comment #15 from Jiri Slaby <jirislaby@gmail.com> 2009-07-03 06:49:38 > --- > Hey, but you found a network! > > Is the columbiaplace the AP you try to connect to? If yes, could you stop > network manager, all running wpa_supplicants, put this into /tmp/wpa: > network={ > ssid="ColumbiaPlace" > scan_ssid=1 > key_mgmt=WPA-PSK > psk="your_passwd" > } > and run: > /usr/sbin/wpa_supplicant -c /tmp/wpa -Dwext -iwlan0 -d > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug. > You reported the bug. >
Upon reboot the results are zero wpa-gui gets nothing from wpa_supplicants, and the Ubuntu network status indicator is all blank unless an ethernet cable is hooked up. I know on the standare Acer One Netbook it all works right out of the box. This has a 3G network inaddition to the wireless, and I suppose that is screwing things up. Apparently this is just another piece of hardware that doesn't work with Linux. I'm wondering if I should do a fresh install of Ubuntu 9.04 and change nothing but the kernel and see if that would work? On Fri, Jul 3, 2009 at 8:01 AM, George Bodley <gbodley@gmail.com> wrote: > jl@jl-acer:~$ sudo /usr/sbin/wpa_supplicant -c /tmp/wpa -Dwext -iwlan0 -d > [sudo] password for jl: > sudo: /usr/sbin/wpa_supplicant: command not found > jl@jl-acer:~$ > > Inside of the directory /tmp, I have a file named "wpa" which includes the > following: > > network={ > ssid="ColumbiaPlace" > scan_ssid=1 > key_mgmt=WPA-PSK > psk="MyActualPassword" > } > > > The wpa_gui says: > Status: Could not get status from wpa_supplicant > > Ubuntu System -> Administration -> Hardware Drivers sayon ths: > > "No proprietary drivers on this system" > > I will reboot and see if anything changes. But if this did work, how would > I adress adhoc wireless? Plus the system needs to work through a GUI for > average users. > > > On Fri, Jul 3, 2009 at 12:49 AM, <bugzilla-daemon@bugzilla.kernel.org>wrote: > >> http://bugzilla.kernel.org/show_bug.cgi?id=13611 >> >> >> >> >> >> --- Comment #15 from Jiri Slaby <jirislaby@gmail.com> 2009-07-03 >> 06:49:38 --- >> Hey, but you found a network! >> >> Is the columbiaplace the AP you try to connect to? If yes, could you stop >> network manager, all running wpa_supplicants, put this into /tmp/wpa: >> network={ >> ssid="ColumbiaPlace" >> scan_ssid=1 >> key_mgmt=WPA-PSK >> psk="your_passwd" >> } >> and run: >> /usr/sbin/wpa_supplicant -c /tmp/wpa -Dwext -iwlan0 -d >> >> -- >> Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email >> ------- You are receiving this mail because: ------- >> You are on the CC list for the bug. >> You reported the bug. >> > >
(In reply to comment #16) > jl@jl-acer:~$ sudo /usr/sbin/wpa_supplicant -c /tmp/wpa -Dwext -iwlan0 -d > [sudo] password for jl: > sudo: /usr/sbin/wpa_supplicant: command not found Aha, OK, try without /usr prefix. It's in /sbin on ubuntu. > The wpa_gui says: > Status: Could not get status from wpa_supplicant It won't work, since you start supplicant without control iface.
Closed due to lack of response...