Created attachment 20681 [details] config-2.6.29 Latest working kernel version: 2.6.28.5 Earliest failing kernel version: 2.6.29 Distribution: Debian Hardware Environment:Asus M2NX-Plus, nVidia MCP61 Ethernet Software Environment: Standard distribution core software. Problem Description: After booting into 2.6.29 kernel my network card goes down without any reasons. ifconfig eth0 not works. I have other nc and it work great(RTL-8139). lspci: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1) ifconfig eth0: eth0 Link encap:Ethernet HWaddr 00:1d:60:d9:90:60 UP BROADCAST RUNNING MULTICAST MTU:576 Metric:1 RX packets:16133 errors:0 dropped:0 overruns:0 frame:0 TX packets:24765 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3348064 (3.1 MiB) TX bytes:10176063 (9.7 MiB) Interrupt:27 lsmod | grep -v Module | sort : 8139cp 20576 0 8139too 25796 0 amd74xx 6824 0 ata_generic 5876 0 button 7360 0 cdrom 34120 1 ide_cd_mod ehci_hcd 34988 0 evdev 10816 3 ext3 124800 1 fan 4064 0 forcedeth 55760 0 i2c_core 25392 2 nvidia,i2c_nforce2 i2c_nforce2 7104 0 ide_cd_mod 30688 0 ide_core 110212 3 ide_cd_mod,amd74xx,ide_pci_generic ide_pci_generic 4628 0 ipv6 288048 22 jbd 51304 1 ext3 k8temp 4992 0 libata 175916 2 sata_nv,ata_generic loop 15596 0 mbcache 9236 1 ext3 mii 5728 2 8139too,8139cp nvidia 8109224 26 ohci_hcd 23420 0 processor 38140 1 thermal psmouse 41916 0 reiserfs 214112 1 sata_nv 25048 3 scsi_mod 165368 2 sd_mod,libata sd_mod 27144 5 serio_raw 5892 0 snd 63672 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device snd_hda_codec 64640 2 snd_hda_codec_realtek,snd_hda_intel snd_hda_codec_realtek 245316 1 snd_hda_intel 27064 4 snd_page_alloc 9808 2 snd_hda_intel,snd_pcm snd_pcm 74984 3 snd_hda_intel,snd_hda_codec snd_seq 51904 0 snd_seq_device 7556 1 snd_seq snd_timer 22688 3 snd_pcm,snd_seq soundcore 8032 1 snd thermal 19024 0 thermal_sys 13184 3 thermal,processor,fan
Created attachment 20682 [details] dmesg.log
I have the same problem, but with an MCP51 chip: lspci -vv ... 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) Subsystem: Hewlett-Packard Company Presario V6133CL Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at b0008000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 30e0 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- Kernel driver in use: forcedeth Kernel modules: forcedeth ... The card worked flawlessly in 2.6.28.5, but dies within minutes from boot with 2.6.29. No errors counted, no errors in dmesg, nothing. My system: Compaq V6057EA Gentoo ~amd64 4G RAM Vanilla kernel 2.6.29 x86_64
Same problem, network just stops working after a few seconds of FTP traffic. Using nForce4 Ultra: 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) Subsystem: ABIT Computer Corp. Device 1c0c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at fc00 [size=8] Capabilities: <access denied> Kernel driver in use: forcedeth Kernel modules: forcedeth Can not see this problem in kernel 2.6.29-rc8, so my guess is that the problem happened between 2.6.29-rc8 och 2.6.29 final.
The latest git sources does seem to work, anyone else that can confirm this?
Yes, I can confirm that my network works in kernel 2.6.29-git3.
Also occurs with 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1), works with 2.6.28.8. I have not tried 2.6.29-git3.
Tested with kernel 2.6.29.1 and my network seems to be stable again :-)
Ok. With new 2.6.29.1 kernel network is stable. Thanks.
(In reply to comment #6) > Also occurs with 00:04.0 Ethernet controller: nVidia Corporation nForce2 > Ethernet Controller (rev a1), works with 2.6.28.8. I have not tried > 2.6.29-git3. Updating to 2.6.29.1 seems to fix this also.