Latest working kernel version:2.6.15-1.2054_FC5smp Earliest failing kernel version:2.6.21 Distribution:Fedora 5 smp Hardware Environment: Software Environment:x86_32 Problem Description: when using serial console to connect,it raises the following message, and do not stop untill disconnected. CPI Exception (evgpe-0577): AE_NOT_FOUND, while evaluating GPE method [_L08] [20070126] <4>ACPI Error (psargs-0355): [\_SB_.PCI0.LPC0.SIO_.COMA] Namespace lookup failure, AE_NOT_FOUND <4>ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L08] (Node c18d27fc), AE_NOT_FOUND <4>ACPI Exception (evgpe-0577): AE_NOT_FOUND, while evaluating GPE method [_L08] [20070126] <4>ACPI Error (psargs-0355): [\_SB_.PCI0.LPC0.SIO_.COMA] Namespace lookup failure, AE_NOT_FOUND <4>ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L08] (Node c18d27fc), AE_NOT_FOUND <4>ACPI Exception (evgpe-0577): AE_NOT_FOUND, while evaluating GPE method [_L08] [20070126] <4>ACPI Error (psargs-0355): [\_SB_.PCI0.LPC0.SIO_.COMA] Namespace lookup failure, AE_NOT_FOUND <4>ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L08] (Node c18d27fc), AE_NOT_FOUND and the dmesg output in 2.6.21 is: Linux version 2.6.21-prep (root@localhost.localdomain) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #4 Wed Apr 23 20:35:39 EDT 2008 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000003fe10000 end: 000000003ff10000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000003ff10000 size: 0000000000006000 end: 000000003ff16000 type: 3 copy_e820_map() start: 000000003ff16000 size: 000000000006a000 end: 000000003ff80000 type: 4 copy_e820_map() start: 000000003ff80000 size: 0000000000080000 end: 0000000040000000 type: 2 copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff10000 (usable) BIOS-e820: 000000003ff10000 - 000000003ff16000 (ACPI data) BIOS-e820: 000000003ff16000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6ea0 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 261904) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 261904 early_node_map[1] active PFN ranges 0: 0 -> 261904 On node 0 totalpages: 261904 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 254 pages used for memmap HighMem zone: 32274 pages, LIFO batch:7 DMI present. Using APIC driver default ACPI: RSDP 000F6E70, 0024 (r2 PTLTD ) ACPI: XSDT 3FF105F2, 008C (r1 PTLTD XSDT 6040000 LTP 0) ACPI: FACP 3FF15E34, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3) ACPI: DSDT 3FF1216C, 3C54 (r1 Intel BLAKFORD 6040000 MSFT 100000E) ACPI: FACS 3FF16FC0, 0040 ACPI: APIC 3FF15F28, 0074 (r1 PTLTD APIC 6040000 LTP 0) ACPI: MCFG 3FF15F9C, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: BOOT 3FF15FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 3FF11F0D, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228) ACPI: SSDT 3FF11E67, 00A6 (r1 PmRef Cpu7Tst 3000 INTL 20050228) ACPI: SSDT 3FF11DC1, 00A6 (r1 PmRef Cpu6Tst 3000 INTL 20050228) ACPI: SSDT 3FF11D1B, 00A6 (r1 PmRef Cpu5Tst 3000 INTL 20050228) ACPI: SSDT 3FF11C75, 00A6 (r1 PmRef Cpu4Tst 3000 INTL 20050228) ACPI: SSDT 3FF11BCF, 00A6 (r1 PmRef Cpu3Tst 3000 INTL 20050228) ACPI: SSDT 3FF11B29, 00A6 (r1 PmRef Cpu2Tst 3000 INTL 20050228) ACPI: SSDT 3FF11A83, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228) ACPI: SSDT 3FF1067E, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 WARNING: NR_CPUS limit of 1 reached. Processor ignored. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists. Total pages: 259858 Kernel command line: ro root=LABEL=/ root console=ttyS0,9600 console=tty0 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec80000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0731000 soft=c0730000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1862.003 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033172k/1047616k available (1962k kernel code, 13752k reserved, 1017k data, 260k init, 130112k highmem) virtual kernel memory layout: fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc06ea000 - 0xc072b000 ( 260 kB) .data : 0xc05ea946 - 0xc06e8e34 (1017 kB) .text : 0xc0400000 - 0xc05ea946 (1962 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3725.50 BogoMIPS (lpj=1862754) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0004e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Booting paravirtualized kernel on bare hardware Time: 16:30:48 Date: 03/25/108 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd504, last bus=13 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:0d:01.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved Time: tsc clocksource has been installed. pnp: 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved pnp: 00:01: iomem range 0xfec81000-0xfec81fff has been reserved pnp: 00:01: iomem range 0xfec81400-0xfec823ff could not be reserved PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:01:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: de100000-de1fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: 2000-2fff MEM window: de200000-de2fffff PREFETCH window: 50000000-500fffff PCI: Bridge: 0000:00:05.0 IO window: 3000-3fff MEM window: de300000-de3fffff PREFETCH window: 50100000-501fffff PCI: Bridge: 0000:00:06.0 IO window: 4000-4fff MEM window: de400000-de4fffff PREFETCH window: 50200000-502fffff PCI: Bridge: 0000:00:07.0 IO window: 5000-5fff MEM window: de500000-de5fffff PREFETCH window: 50300000-503fffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Ignore bogus resource 6 [0:0] of 0000:0d:01.0 PCI: Bridge: 0000:00:1e.0 IO window: 6000-6fff MEM window: de000000-de0fffff PREFETCH window: dc000000-ddffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:01.0 to 64 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:02:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.3 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1035k freed Simple Boot Flag at 0x40 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1209141044.288:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key D5EB5E86CEE3D9A0 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:01:00.0 to 64 Allocate Port Service[0000:01:00.0:pcie10] PCI: Setting latency timer of device 0000:02:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:00.0:pcie20] PCI: Setting latency timer of device 0000:02:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:01.0:pcie20] PCI: Setting latency timer of device 0000:02:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:02.0:pcie20] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PSM0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Magic number: 4:42:541 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 260k freed Write protecting the kernel read-only data: 800k SCSI subsystem initialized libata version 2.20 loaded. ata_piix 0000:00:1f.1: version 2.10ac1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15 scsi0 : ata_piix scsi1 : ata_piix ata2: port disabled. ignoring. ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] PCI: Enabling device 0000:00:1f.2 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata3: SATA max UDMA/133 cmd 0x000118c8 ctl 0x000118ae bmdma 0x000118b0 irq 19 ata4: SATA max UDMA/133 cmd 0x000118c0 ctl 0x000118aa bmdma 0x000118b8 irq 19 scsi2 : ata_piix ATA: abnormal status 0x7F on port 0x000118cf scsi3 : ata_piix ata4.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 ata4.00: ATA-7: MAXTOR STM380811AS, 3.AAE, max UDMA/133 ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA MAXTOR STM380811 3.AA PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 3:0:0:0: Attached scsi disk sda kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1209141051.287:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1161 types, 135 bools, 1 sens, 256 cats security: 55 classes, 38679 rules security: class appletalk_socket not defined in policy security: class packet not defined in policy security: class key not defined in policy security: class context not defined in policy security: class dccp_socket not defined in policy security: permission dccp_recv in class node not defined in policy security: permission dccp_send in class node not defined in policy security: permission dccp_recv in class netif not defined in policy security: permission dccp_send in class netif not defined in policy security: permission setkeycreate in class process not defined in policy security: permission setsockcreate in class process not defined in policy security: permission polmatch in class association not defined in policy SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1209141052.287:3): policy loaded auid=4294967295 SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts audit(1209155462.668:4): avc: denied { audit_write } for pid=436 comm="hwclock" capability=29 scontext=system_u:system_r:hwclock_t:s0 tcontext=system_u:system_r:hwclock_t:s0 tclass=capability intel_rng: FWH not detected input: PC Speaker as /class/input/input1 ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:08:00.0 to 64 e1000: 0000:08:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:19:db:47:0a:e2 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:08:00.1 to 64 e1000: 0000:08:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:19:db:47:0a:e3 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:09:00.0 to 64 e1000: 0000:09:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:19:db:47:0a:e4 e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:09:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:09:00.1 to 64 e1000: 0000:09:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:19:db:47:0a:e5 e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:0a:00.0 to 64 e1000: 0000:0a:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:19:db:47:0a:e6 e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:0a:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:0a:00.1 to 64 e1000: 0000:0a:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:19:db:47:0a:e7 e1000: eth5: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:0b:00.0 to 64 e1000: 0000:0b:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:19:db:47:0a:e8 e1000: eth6: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:0b:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:0b:00.1 to 64 e1000: 0000:0b:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:19:db:47:0a:e9 e1000: eth7: e1000_probe: Intel(R) PRO/1000 Network Connection sd 3:0:0:0: Attached scsi generic sg0 type 0 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 17, io mem 0xde800000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 1-2: device not accepting address 2, error -71 usb 1-2: new low speed USB device using uhci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice input: USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-2 input: USB Keyboard as /class/input/input3 input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-2 floppy0: no floppy controllers found lp: driver loaded but no devices found No dock devices found. input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com EXT3 FS on sda1, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 16707592k swap on /dev/sda2. Priority:-1 extents:1 across:16707592k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8184 buckets, 65472 max) SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized audit(1209155482.665:5): avc: denied { net_bind_service } for pid=2106 comm="sdpd" capability=10 scontext=system_u:system_r:bluetooth_t:s0 tcontext=system_u:system_r:bluetooth_t:s0 tclass=capability audit(1209155483.165:6): avc: denied { audit_write } for pid=2094 comm="dbus-daemon" capability=29 scontext=system_u:system_r:system_dbusd_t:s0 tcontext=system_u:system_r:system_dbusd_t:s0 tclass=capability Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 Steps to reproduce:
Please attach the output of acpidump, lspci -vxxx. Thanks.
Created attachment 15906 [details] lspci -vxxx output
Created attachment 15907 [details] acpidump output file
Hi, lofagove, The dmesg output of a more recent kernel would bring more valuable infor for us to debug. As you've already tried 2.6.25, would you please attach the dmesg please?
Hi, Iofagove Thanks for the info. It seems that the error message is related with the following error in BIOS. > External (\_SB_.PCI0.LPC0.SIO_.COMA) (COMA can't be found in other SSDT tables). So OS reports the error message But it is very strange that OS raises the following message, and do not stop untill disconnected. It seems that the GPE 0x08 method can't be disabled. We will try to investigate the reason. Will you please confirm whether the windows can work well on this laptop? Thanks.
Hi,all Sorry for replying you so late. Thank you for your help. Some other problems had occured when tring 2.6.25, so I can not get the messages about dmesg output. for this error message,I had tried some other serial lines,some can work well, some can't. It sounds too strange,so I do not sure if it is linux ACPI's bug. For some reasons I haven't try windows OS ,do not confirm if it can work well.I'm communicating with the hardware supporter, hoping than he can give some detail informations. now i have no idea about this,any other methods to try? Thanks.
As Yakui said in comment #5, the device \_SB_.PCI0.LPC0.SIO_.COMA really doesn't exist in the Vendor's ACPI BIOS -- so it is correct that Linux complains when trying to Notify it. Secondly... Method (_L08, 0, NotSerialized) { Notify (\_SB.PCI0.LPC0.SIO.COMA, 0x02) } all the AML does on this GPE is to do that notify -- there is no code to go and turn off any hardware interrupt source. So it makes sense that if you get this, you'll get it again as soon as we return from the interrupt handler. Finally, the fact that some serial cables work and some do not suggest that the cable is mis-wired to trigger a one-time event that this serial port does not expect -- perhaps flow control? I suggest that you use the cable that works, and also explore the BIOS for SETUP options related to the serial port. I don't see a Linux bug here.