Distribution: Fedora 8 (ppc) Hardware Environment: ibook G4 Software Environment: Problem Description: The bridge is not detected only a /dev/sda is created, witch can't be mounted or accesed. lsusb: Bus 001 Device 004: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge dmesg: Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 0:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS scsi 0:0:0:0: Attached scsi generic sg0 type 0 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] Attached SCSI disk Steps to reproduce: Just attach the device
Strange, maybe my fault. If you reconnect the USB port again, while the power is stil on, it will be recognized. But now i get with a DVD-Burner: Driver 'sr' needs updating - please use bus_type methods - don't get this. So close this, if it is wrongly filed.