Bug 10422

Summary: Suspend/Resume breaks continous reads CD-ROM drive
Product: IO/Storage Reporter: Colin King (colin.king)
Component: Serial ATAAssignee: Tejun Heo (htejun)
Status: CLOSED INSUFFICIENT_DATA    
Severity: normal CC: bunk, colin.king, erik.andren, rjw
Priority: P1    
Hardware: All   
OS: Linux   
Kernel Version: 2.6.24.4 Subsystem:
Regression: No Bisected commit-id:
Bug Depends on:    
Bug Blocks: 7216    

Description Colin King 2008-04-08 04:50:22 UTC
Latest working kernel version: Unknown
Earliest failing kernel version: Uknown
Distribution: Ubuntu 8.04 beta with stock 2.6.24.4 kernel
Hardware Environment: Lenovo 3000N200 (and various laptops)
Software Environment:
Problem Description: Continuous raw reads from CD-ROM fails on power suspend/resume.

Steps to reproduce:

dd if=/dev/scd0 of=/dev/null

and then:

echo mem > /sys/power/state

on resume, dd fails with the error:

dd: reading `/dev/scd0': Input/output error
27360+0 records in
27360+0 records out

and dmesg reports:

[    1.144598] end_request: I/O error, dev sr0, sector 27360
[    1.144604] printk: 55 messages suppressed.
[    1.144608] Buffer I/O error on device sr0, logical block 3420
[    1.145580] Buffer I/O error on device sr0, logical block 3453
[    1.145653] Buffer I/O error on device sr0, logical block 3454
[    1.145722] Buffer I/O error on device sr0, logical block 3455
[    1.145791] Buffer I/O error on device sr0, logical block 3456
[    1.145859] Buffer I/O error on device sr0, logical block 3457
[    1.145928] Buffer I/O error on device sr0, logical block 3458
[    1.145996] Buffer I/O error on device sr0, logical block 3459

IDE controller:

00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)

CD-ROM: MATSHITA DVD-RAM UJ-850 z RB32 PQ: 0 ANSI: 5
Comment 1 Tejun Heo 2008-04-09 18:18:36 UTC
Can you please post full result of 'dmesg'?  There should be leading libata messages before those buffer IO failure messages.  Also, please post the result of "lspci -nn".  What do you mean by "and various laptops"?  Is this problem common to other laptops w/ the same drive?
Comment 2 Colin King 2008-04-10 05:07:08 UTC
Hi, here is the dmesg log from when the suspend occurs to when the resume completes.


[  758.400008] UDF-fs: No VRS found
[  758.861190] ISO 9660 Extensions: Microsoft Joliet Level 3
[  758.861386] ISO 9660 Extensions: RRIP_1991A
[  763.526272] wlan0: deauthenticate(reason=3)
[  763.966240] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[  764.194613] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[  766.248300] Syncing filesystems ... done.
[  766.257181] PM: Preparing system for mem sleep
[  766.257186] Freezing user space processes ... (elapsed 0.00 seconds) done.
[  766.264272] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[  766.264314] PM: Entering mem sleep
[  766.264317] Suspending console(s)
[  766.264320] drm_sysfs_suspend
[  766.264796] ACPI: PCI interrupt for device 0000:00:02.0 disabled
[  766.358737] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  766.492042] sd 2:0:0:0: [sda] Stopping disk
[  766.521862] ACPI handle has no context!
[  766.522031] ACPI handle has no context!
[  766.522052] ACPI: PCI interrupt for device 0000:08:06.1 disabled
[  766.522059] ACPI handle has no context!
[  766.527499] ACPI handle has no context!
[  766.528515] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[  766.528757] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[  766.528918] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[  766.531244] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[  766.531289] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[  766.531334] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[  766.533565] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[  766.535784] ACPI: PCI interrupt for device 0000:00:1a.7 disabled
[  766.537954] ACPI: PCI interrupt for device 0000:00:1a.1 disabled
[  766.538000] ACPI: PCI interrupt for device 0000:00:1a.0 disabled
[  766.545048] Disabling non-boot CPUs ...
[  766.545070] CPU0 attaching NULL sched-domain.
[  766.545072] CPU1 attaching NULL sched-domain.
[  766.656725] CPU 1 is now offline
[  766.656729] SMP alternatives: switching to UP code
[  766.658232] CPU0 attaching sched-domain:
[  766.658235]  domain 0: span 01
[  766.658237]   groups: 01
[  766.658402] CPU1 is down
[  766.658571] Extended CMOS year: 2000
[    0.286121] Back to C!
[    0.286440] Extended CMOS year: 2000
[    0.286580] Enabling non-boot CPUs ...
[    0.286659] CPU0 attaching NULL sched-domain.
[    0.296667] SMP alternatives: switching to SMP code
[    0.297934] Booting processor 1/2 APIC 0x1
[    0.308247] Initializing CPU#1
[    0.388524] Calibrating delay using timer specific routine.. 2992.39 BogoMIPS (lpj=5984780)
[    0.388532] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.388534] CPU: L2 cache: 2048K
[    0.388537] CPU 1/1 -> Node 0
[    0.388539] CPU: Physical Processor ID: 0
[    0.388540] CPU: Processor Core ID: 1
[    0.388926] Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz stepping 0d
[    0.389017] CPU0 attaching sched-domain:
[    0.389020]  domain 0: span 03
[    0.389022]   groups: 01 02
[    0.389025]   domain 1: span 03
[    0.389027]    groups: 03
[    0.389029] CPU1 attaching sched-domain:
[    0.389030]  domain 0: span 03
[    0.389032]   groups: 02 01
[    0.389034]   domain 1: span 03
[    0.389036]    groups: 03
[    0.389458] CPU1 is up
[    0.390533] Switched to high resolution mode on CPU 1
[    0.410855] PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 105)
[    0.410869] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
[    0.424051] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
[    0.424067] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.424074] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    0.424131] usb usb1: root hub lost power or was reset
[    0.424153] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[    0.424159] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    0.424214] usb usb2: root hub lost power or was reset
[    0.425994] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    0.426003] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    0.428197] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
[    0.428229] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[    0.428238] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[    0.445159] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20002020, writing 2020)
[    0.445173] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407)
[    0.445218] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.445253] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
[    0.445298] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.445332] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
[    0.445376] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.445401] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20005050, writing 5050)
[    0.445414] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
[    0.445458] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.445467] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    0.445473] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    0.445528] usb usb3: root hub lost power or was reset
[    0.445549] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[    0.445555] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    0.445610] usb usb4: root hub lost power or was reset
[    0.445642] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.445648] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    0.445703] usb usb5: root hub lost power or was reset
[    0.447456] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    0.447464] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    0.447599] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.447695] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
[    0.447707] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[    0.447713] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    0.450662] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[    0.450671] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    0.452307] PM: Writing back config space on device 0000:00:1f.3 at offset 4 (was 0, writing 50000000)
[    0.452365] PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10a)
[    0.452434] PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f8000000)
[    0.452447] PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10)
[    0.452467] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100102)
[    0.452599] PM: Writing back config space on device 0000:06:00.0 at offset c (was 0, writing ffdf0000)
[    0.452651] PM: Writing back config space on device 0000:06:00.0 at offset 3 (was 0, writing 10)
[    0.452668] PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100000, writing 40100102)
[    0.507569] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc200000-fc2007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    0.515455] ACPI: PCI Interrupt 0000:08:06.1[B] -> GSI 23 (level, low) -> IRQ 23
[    0.515491] PM: Writing back config space on device 0000:08:06.2 at offset b (was 382b17aa, writing 382c17aa)
[    0.515515] PM: Writing back config space on device 0000:08:06.2 at offset 2 (was 8800001, writing 880000a)
[    0.515524] PM: Writing back config space on device 0000:08:06.2 at offset 0 (was 8431180, writing 5921180)
[    0.515558] PM: Writing back config space on device 0000:08:06.3 at offset b (was 382c17aa, writing 382d17aa)
[    0.515583] PM: Writing back config space on device 0000:08:06.3 at offset 2 (was 880000a, writing 8800005)
[    0.515592] PM: Writing back config space on device 0000:08:06.3 at offset 0 (was 5921180, writing 8521180)
[    0.593264] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[    0.593268] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[    0.616948] ata1.00: configured for UDMA/33
[    0.924493] sd 2:0:0:0: [sda] Starting disk
[    1.071947] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[    1.071950] ata3.00: ACPI cmd ef/03:22:00:00:00:a0 filtered out
[    1.076172] ata3.00: configured for UDMA/133
[    1.076740] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    1.076760] sd 2:0:0:0: [sda] Write Protect is off
[    1.076763] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.076791] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.189352] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.190752] PM: Finishing wakeup.
[    1.190754] Restarting tasks ... <6>usb 2-1: USB disconnect, address 4
[    1.200010] end_request: I/O error, dev sr0, sector 45280
[    1.200017] Buffer I/O error on device sr0, logical block 11320
[    1.200067] Buffer I/O error on device sr0, logical block 11321
[    1.200112] Buffer I/O error on device sr0, logical block 11322
[    1.200155] Buffer I/O error on device sr0, logical block 11323
[    1.200199] Buffer I/O error on device sr0, logical block 11324
[    1.200241] Buffer I/O error on device sr0, logical block 11325
[    1.200286] Buffer I/O error on device sr0, logical block 11326
[    1.200329] Buffer I/O error on device sr0, logical block 11327
[    1.200373] Buffer I/O error on device sr0, logical block 11328
[    1.200416] Buffer I/O error on device sr0, logical block 11329
[    1.203571] done.
[    1.338764] usb 4-2: USB disconnect, address 2
[    1.589268] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[    1.589274] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[    1.589411] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[    1.589432] PCI: Setting latency timer of device 0000:04:00.0 to 64
[    1.590063] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[    1.733026] usb 6-4: USB disconnect, address 3
[    1.733179] tg3.c:v3.86 (November 9, 2007)
[    1.733226] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[    1.733248] PCI: Setting latency timer of device 0000:06:00.0 to 64
[    1.765481] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[    1.767357] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[    1.786910] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    1.813724] usb 6-4: new high speed USB device using ehci_hcd and address 5
[    1.916814] usb 6-4: configuration #1 chosen from 1 choice
[    1.917697] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013)
[    2.032938] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1b:38:0c:7f:47
[    2.032947] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[    2.032950] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.097084] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.318252] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.335024] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    2.422616] usb 2-1: new full speed USB device using uhci_hcd and address 5
[    2.572020] usb 2-1: configuration #1 chosen from 1 choice
[    2.794502] usb 4-2: new full speed USB device using uhci_hcd and address 3
[    2.833751] usb 4-2: configuration #1 chosen from 1 choice
[    5.260868] VFS: busy inodes on changed media.
[    5.266765] VFS: busy inodes on changed media.
[    5.691934] wlan0: Initial auth_alg=0
[    5.691944] wlan0: authenticate with AP 00:1a:c1:38:47:d4
[    5.693302] wlan0: RX authentication from 00:1a:c1:38:47:d4 (alg=0 transaction=2 status=0)
[    5.693309] wlan0: authenticated
[    5.693313] wlan0: associate with AP 00:1a:c1:38:47:d4
[    5.697888] wlan0: RX AssocResp from 00:1a:c1:38:47:d4 (capab=0x431 status=0 aid=1)
[    5.697898] wlan0: associated
[    5.698443] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
[    5.701599] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    5.701910] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[    5.702148] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[    5.702453] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15

And the result of lspci -nn:

00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4227] (rev 02)
06:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
08:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832]
08:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
08:06.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 01)
08:06.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 0a)

The drive of my Lenovo 3000N200 is:

MATSHITA DVD-RAM UJ-850 z RB32 PQ: 0 ANSI: 5

This problem seems to occur with a Toshiba Tecra A7 with the following drive: 

MATSHITA DVD-RAM UJ-850S  1.20 PQ: 0 ANSI: 5

so I am not sure if it there needs some quirk horkage needed for this particular range of MATSHITA drives, or if it's a problem with the underlying sata core.

and lspci:

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f0a00000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at 1800 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at f0b00000 (32-bit, non-prefetchable) [size=256K]
	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Region 0: Memory at f0a80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: Toshiba America Info Systems Toshiba Satellite A100-796 audio (Realtek ALC861) [1179:ff10]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at f0b40000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [70] Express Unknown type IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
		Link: Latency L0s <64ns, L1 <1us
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed unknown, Width x0

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0600000-f06fffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
		Link: Latency L0s <256ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x1
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
		Slot: Number 2, PowerLimit 6.500000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
		Slot: AttnInd Unknown, PwrInd Unknown, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: fee0100c  Data: 41c1
	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f0700000-f07fffff
	Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
		Link: Latency L0s <256ns, L1 <4us
		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x1
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
		Slot: Number 3, PowerLimit 6.500000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
		Slot: AttnInd Unknown, PwrInd Unknown, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: fee0100c  Data: 41c9
	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: f0800000-f08fffff
	Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
		Link: Latency L0s <1us, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x0
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
		Slot: Number 4, PowerLimit 6.500000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
		Slot: AttnInd Unknown, PwrInd Unknown, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: fee0100c  Data: 41d1
	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 4: I/O ports at 1820 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 4: I/O ports at 1840 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 1860 [size=32]

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 17
	Region 4: I/O ports at 1880 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at f0d44000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=07, subordinate=0b, sec-latency=56
	Memory behind bridge: f0900000-f09fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 18b0 [size=16]
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 10
	Region 4: I/O ports at 18c0 [size=32]

02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller [11ab:4353] (rev 14)
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 219
	Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=16K]
	Region 2: I/O ports at 2000 [size=256]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0300c  Data: 416a
	Capabilities: [e0] Express Legacy Endpoint IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
		Link: Latency L0s <256ns, L1 unlimited
		Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x1

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
	Subsystem: Intel Corporation Unknown device [8086:1040]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 220
	Region 0: Memory at f0700000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
		Address: 00000000fee0300c  Data: 4162
	Capabilities: [e0] Express Legacy Endpoint IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 unlimited
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
		Link: Latency L0s <128ns, L1 <64us
		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x1

07:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f0906000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176
	Memory window 0: f4000000-f7fff000 (prefetchable)
	Memory window 1: f8000000-fbfff000
	I/O window 0: 00001400-000014ff
	I/O window 1: 00001c00-00001cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

07:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (500ns min, 1000ns max), Cache Line Size: 16 bytes
	Interrupt: pin B routed to IRQ 16
	Region 0: Memory at f0905000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at f0900000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME+

07:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f0904000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

07:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01)
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff10]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f0905800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Comment 3 Tejun Heo 2008-04-10 22:56:24 UTC
1. Please attach full kernel log including boot messages, suspend, resume and following failure.

2. Can you please give a shot at 2.6.25-rc8.  We now support hardreset for ich8/9 piix's and libata can kick the device harder in the ass if it doesn't wake up.

Thanks.
Comment 4 Colin King 2008-04-18 08:04:50 UTC
Hi,

Tried to test against 2.6.25-rc8 but the resume does not work now, so this is becoming difficult to test. Will try 2.6.25 when I have some free time.

Colin
Comment 5 Tejun Heo 2008-04-23 20:16:36 UTC
ping
Comment 6 Erik Andr 2009-12-30 08:51:46 UTC
This bug should be closed due to inactivity.
Comment 7 Rafael J. Wysocki 2009-12-30 21:07:45 UTC
OK